Configures file parameters
for Diameter records being stored on the HD storage device.
Product
HSGW
P-GW
SAEGW
S-GW
Mode
Exec > Global Configuration
> HD Storage Policy Configuration
configure > hd storage-policy policy_name
Entering the above
command sequence results in the following prompt:
[local]host_name(config-hd-storage-policy)#
Syntax
file { format acr { custom1...custom10 } | name { extension string | prefix string } | rotation { record-count num | time-interval sec | volume mb mbytes } }
default file { format acr | name prefix | rotation { record-count | time-interval | volume } }
no file ( extension | rotation { record-count | time-interval } }
default
Returns the command
to the default settings for the specified keywords.
no
Removes the configuration
for the specified parameters.
format acr { custom1...custom10 }
Default: custom1
Specifies the file
format used when storing records on the HD storage device. custom1 is
a vendor-specific file format.
name { extension string | prefix string }
Specifies a string
to be pre-pended or appended to the filenames. By default, the policy
name is used for the prefix.
extension string : Specifies
a file extension to append to the filename. string must
be an alphanumeric string of 1 through 10 characters.
prefix string : Specifies
a file prefix to append to the filename. string must
be an alphanumeric string of 1 through 63 characters. This parameter
replaces the policy name used by default.
rotation { record-count num | time-interval sec | volume
mb mbytes }
Specifies the triggers
that prompt file rotation on the HD storage drive. All options can
be configured and upon reaching any of the thresholds, file rotation
is initiated.
record-count num : File rotation
occurs when the number of records reaches the number configured
in this keyword. num must
be an integer from 1000 through 65000. Default = 10000
time-interval sec : File rotation
occurs at time intervals (in seconds) configured by this keyword. sec must
be an integer from 30 through 86400. Default = 3600 (1 hour)
volume mb mbytes : File
rotation occurs when the record volume exceeds the value (in megabytes)
configured by this keyword. mbytes must
be an integer from 2 through 40. Default = 4
Usage Guidelines
Use this command to
configure file parameters for Diameter records being stored on the HD
storage device.
Example
The following command
sets the file rotation thresholds for files being stored on the
HD storage device:file rotation volume mb 4
file rotation record-count 15000
file rotation time-interval 7200
The following command
replaces the policy name as the prefix of all files being stored through
this policy with the prefix sgw :file name prefix sgw