Inline TCP Optimization

This chapter includes the following topics:

Feature Summary and Revision History

Summary Data

Applicable Product(s) or Functional Area

P-GW

Applicable Platform(s)

  • ASR 5500

  • VPC - DI

  • VPC - SI

Feature Default

Disabled - Configuration Required

Related Changes in This Release

Not Applicable

Related Documentation

  • Command Line Interface Reference

  • P-GW Administration Guide

  • Statistics and Counters Reference

Revision History

Revision Details

Release

In this release, the throughput gain has been increased. KPIs - separate counters for IP versions (IPv4/IPv6) and application protocols (HTTP/HTTPs), are added.

21.10

In this release, two new commands - accl-flags and cwnd-gain , are added to the TCP Acceleration Profile Parameters configuration. Configuring these commands increases throughput gain and optimized mid-flow proxy engagement procedures for TCP accelerated flows.

Also, the output for the show tcp-acceleration-profile command has been updated.

21.9.1

Inline TCP Optimization engine is enhanced to dynamically engage the TCP acceleration module at mid-flow.

21.9

First introduced.

21.8

Feature Description

Inline TCP Optimization is an integrated solution to service providers to increase the TCP flow throughput for TCP connections. This solution enables faster transmission of data for a better user experience.

The Inline TCP Optimization solution ensures accelerated TCP flows using a proprietary algorithm that provides efficient and optimal throughput at a given time. A TCP proxy has been integrated with this solution to monitor and control the TCP congestion window for optimal throughput.

The Inline TCP Optimization solution also supports split TCP sessions to accommodate wireless requirements and provides feature parity with other existing inline services.


Note

Optimization only applies to the downlink data on the Gn interface.


The Inline TCP Optimization feature is license controlled. Contact your Cisco account representative for detailed information on specific licensing requirements. For information on installing and verifying licenses, refer to the Managing License Keys section of the Software Management Operations chapter in the System Administration Guide.

How It Works

The TCP Optimization feature includes the following functionalities:

  • TCP Connection Splicing: The TCP connections are split into two connections; one connection towards Gn and the other connection towards Gi, inside P-GW. The connections are split in a transparent manner in the P-GW so that the UE and the Gi servers are transparent to the connection being split.

  • TCP Proxy ensures seamless movement of data across these two TCP split connections.

  • TCP Optimization is deployed on the Gn interface (towards the UE) of the TCP stack. A user-space TCP stack in P-GW is used.

  • Cisco library for TCP optimization:

    • Provides algorithms that are designed to increase the TCP throughput.

    • Interfaces with the User-space TCP stack (Gn interface) and notifies appropriate events that occur in the TCP connection and takes actions accordingly.

    • Provides APIs to integrate the Cisco Library (for TCP optimization) and StarOS.


Note

TCP Acceleration is enabled during the start of the TCP flow (when SYN packet is received). It cannot be disabled later during the flow.


Accelerating Selected TCP Flows

The Inline TCP Optimization solution is designed to optimize most-eligible TCP flows.

The following are a few criteria to select TCP flows for acceleration:

  • Based on the amount of data seen on the flow: Flows that have data more than that of the threshold value are accelerated.

  • TCP acceleration is avoided in certain scenarios for throttled TCP flows. For example:

    • ADC flows that configured to be throttled.

    • TCP flows throttled due to breaching data limit triggered by OCS/PCRF.

    • Tethered flows that are throttled.

  • Based on GBR/non-GBR: Only TCP flows on default bearers is applicable for TCP acceleration.


Note

TCP acceleration is only supported for LTE RAT-Type.


Configuring Inline TCP Optimization

Enabling TCP Acceleration under Active Charging Service

Use the following configuration to enable TCP acceleration:

configure 
   require active-charging 
   active-charging service service_name 
      tcp-acceleration 
      end 

NOTES:

  • tcp-acceleration : Enables TCP acceleration under the ACS Configuration mode.

Enabling TCP Acceleration under Trigger Action

Use the following configuration to enable TCP acceleration:

configure 
   require active-charging 
   active-charging service service_name 
      trigger-action trigger_action_name 
         tcp-acceleration profile profile_name 
         end 

NOTES:

  • tcp-acceleration : Enables TCP acceleration under the ACS Trigger Action Configuration mode.

  • profile : Identifies the TCP acceleration profile. The profile_name is a string ranging from 1 to 63 characters.

Configuring a TCP Acceleration Profile

Use the following configuration to configure a TCP Acceleration Profile:

configure 
   require active-charging 
   active-charging service service_name 
      [ no ] tcp-acceleration-profile profile_name 
      end 

NOTES:

  • tcp-acceleration-profile : Configures the TCP Acceleration feature profile for inline TCP optimization.

  • no : Disables the TCP Acceleration profile.

Configuring TCP Acceleration Profile Parameters

Use the following commands to configure the TCP acceleration profile parameters:

configure 
   require active-charging 
   active-charging service service_name 
      [ no ] tcp-acceleration-profile profile_name 
         accl-flags flag_value 
         default accl-flags 
         buffer-size { [ downlink [ 128KB | 256KB | 512KB | 1024KB | 1536KB | 2048KB | 2560KB | 3072KB | 3584KB | 4096KB ] [ uplink [ 128KB | 256KB | 512KB | 1024KB | 1536KB | 2048KB | 2560KB | 3072KB | 3584KB | 4096KB ] ] ] | [ uplink [ 128KB | 256KB | 512KB | 1024KB | 1536KB | 2048KB | 2560KB | 3072KB | 3584KB | 4096KB ] [ downlink [ 128KB | 256KB | 512KB | 1024KB | 1536KB | 2048KB | 2560KB | 3072KB | 3584KB | 4096KB ] ] ] } 
         cwnd-gain { dynamic { off | on } [ factor factor_value ] | factor factor_value [ dynamic { off | on } ] } 
         default cwnd-gain 
         default buffer-size [ downlink | uplink ] 
         initial-cwnd-size window_size 
         default initial-cwnd-size 
         max-rtt max_rtt_value 
         default max-rtt 
         mss mss_value 
         default mss 
         end 

NOTES:

  • default : Assigns or restores default values to its following commands.

  • accl-flags : Configures TCP acceleration related optimization flags. The flag_value is an integer ranging from 0 to 65535.

  • buffer-size : Configures the TCP Proxy buffer size for downlink and uplink data in Kilobytes.


    Note

    This command is supported from 21.9.1 and later releases


  • cwnd-gain : Configures the TCP congestion window gain. This command is used by the TCP optimization engine to continuously calculate the actual congestion window size. Scaling the window size allows the TCP optimization engine to manage the in-flight of data in the engine.

    • The dynamic option in this command automatically scales-up the congestion window gain to ensure that it is sized correctly to allow for RTT variation during the flow.

    • The factor option configures the TCP congestion window gain factor. The factor_value is an integer ranging from 1 to 16378.


    Note

    This command is supported from 21.9.1 and later releases


  • initial-cwnd-size : Configures the initial congestion window size in segments. The window_size is an integer ranging from 1 to 65535.

  • max-rtt : Configures the maximum RTT value in milliseconds. The max_rtt_value is an integer ranging from 1 to 10000.

  • mss : Configures the maximum segment size for TCP in Bytes. The mss_value is an integer ranging from 496 to 65535.

Configuring Post-Processing Rule Name under Trigger Condition

Use the following commands to configure the post-processing rule names:

configure 
   require active-charging 
   active-charging service service_name 
      trigger-condition trigger_condition_name 
         post-processing-rule-name { = | contains | ends-with | starts-with } rule_name 
         [ no ] post-processing-rule-name rule_name 
         end 

NOTES:

  • post-processing-rule-name : Sets condition for a particular post-processing rule. The following operators specify how the rules are matched:

    • = : Equals

    • != : Not Equals

    • contains : Contains

    • ends-with : Ends with.

    • starts-with : Starts with

  • name : Specifies the name of the post-processing rule.

Configuring TCP Acceleration Related EDR Attributes

Use the following configuration to configure the EDR attributes:

configure 
   require active-charging 
   active-charging service service_name 
      edr-format edr_format_name 
         rule-variable tcp [ sn-tcp-accl | sn-tcp-accl-reject-reason | sn-tcp-min-rtt | sn-tcp-rtt ] priority priority_value 
         end 

NOTES:

  • rule variable : Assigns a rule variable attributes for EDR or UDR.

  • tcp : Specifies Transmission Control Protocol (TCP) related fields.

    • sn-tcp-accl : Specifies the TCP Acceleration status for the TCP flow.

      • 0: TCP Acceleration is not enabled on the flow.

      • 1: TCP Acceleration is enabled on the flow.

      • 2: Flow is eligible and attempted, but not TCP Accelerated.

      • 3: Flow is eligible, but not attempted for TCP Acceleration

    • sn-tcp-accl-reject-reason : Specifies reason for not accelerating the TCP flow.

    • sn-tcp-min-rtt : Specifies min RTT observed for accelerated TCP flow.

    • sn-tcp-rtt : Specifies smoothed RTT for accelerated TCP flow.

  • priority : Specifies the CSV position of the field (protocol rule) in the EDR. Priority must be an integer from 1 through 65535.

Configuring Flow Length Threshold for a TCP Flow under Trigger Action

The flow length threshold of a TCP flow is configured using Trigger Action under the service-scheme framework. The threshold value of the flow length is used to engage the TCP Acceleration module dynamically.

Use the following configuration to engage TCP acceleration module during mid-flow:

configure 
   require active-charging 
   active-charging service service_name 
      trigger-action trigger_action_name 
         tcp-acceleration flow-length threshold threshold_value 
         no tcp-acceleration flow-length threshold  
         end 

NOTES:

  • no : Disables flow recovery for a trigger-action.

  • flow-length : Specifies the flow length action for a TCP flow.

  • threshold : Specifies the threshold value of the flow length in bytes, for a TCP flow. The threshold value is an integer ranging from 1 to 10000 bytes.

Configuring a Flow Length Threshold Exceeded for a TCP Flow under Trigger Condition

The flow length condition exceed for a TCP flow is configured using Trigger Condition under the service-scheme framework.

Use the following configuration to configure a condition for a TCP flow length:

configure 
   require active-charging 
   active-charging service service_name 
      trigger-condition trigger_condition_name 
         flow-length threshold exceed 
         end 

NOTES:

  • flow-length : Specifies the flow length condition for a TCP flow.

  • threshold : Specifies the threshold value configured in the trigger-action configuration.

  • exceed : Invokes the exceed condition when the flow length is exceeded.

Monitoring and Troubleshooting

This section provides information regarding monitoring and troubleshooting the feature.

Show Command(s) and/or Outputs

This section provides information regarding show commands and/or their outputs in support of this feature.

show configuration

The output of this command displays the following fields for this feature::

  • tcp-acceleration

  • tcp-accelration profile tap

  • buffer-size downlink size uplink size

  • initial-cwnd-size

  • max-rtt

  • mss

show tcp-acceleration-profile { [ all ] | [ name profile-name ] }

The output of this command displays the following fields for this feature:

  • TCP Acceleration Profile Name

    • Initial Congestion Window

    • Max RTT

    • MSS

    • Buffer Size (Downlink)

    • Buffer Size (Uplink)

    • Cwnd Gain Factor

    • Cwnd Gain Dynamic

    • Accl Flags

  • Total tcp-acceleration-profile found

show active-charging tcp-acceleration info

The output of this command displays the following fields for this feature:

  • TCP Acceleration Library Information

    • Version

show active-charging tcp-acceleration statistics sessmgr all

The output of this command displays the following fields for this feature:

  • TCP acceleration Statistics

    • Total Accelerated Flows

    • Current Accelerated Flows

    • Released Accelerated Flows

    • Rejected Accelerated Flows

      • Feature Not Supported

      • RAT Type Not Supported

      • Bearer Not Supported

      • Resource Not Available (Memory)

      • Others

    • Subscriber Level Statistics

      • Total Accelerated Subscribers

      • Current Accelerated Subscribers

    • Protocol Level Statistics

      • Total Flows (IPv4 and IPv6)

        • TCP

        • HTTP

        • HTTPS

      • Active Flows (IPv4 and IPv6)

        • TCP

        • HTTP

        • HTTPS

      • Current Idle Flows (IPv4 and IPv6)

        • TCP

        • HTTP

        • HTTPS

      • Clearer by Idle Timer (IPv4 and IPv6)

        • TCP

        • HTTP

        • HTTPS

  • Control Statistics

    • IPv4 (User-Side and Inet-Side)

      • TCP Terminations Rx

      • TCP Terminations Tx

    • IPv6 (User-Side and Inet-Side)

      • TCP Terminations Rx

      • TCP Terminations Tx

  • Data Statistics

    • IPv4 (User-Side and Inet-Side)

      • Total Pkts Rx

      • Total Bytes Rx

      • Total Pkts Tx

      • Total Bytes Tx

      • HTTP (User-Side and Inet-Side)

        • Total Pkts Rx

        • Total Bytes Rx

        • Total Pkts Tx

        • Total Bytes Tx

        • Retrans Pkts Rx

        • Retrans Bytes Rx

        • Retrans Pkts Tx

        • Retrans Bytes Tx

      • HTTPS (User-Side and Inet-Side)

        • Total Pkts Rx

        • Total Bytes Rx

        • Total Pkts Tx

        • Total Bytes Tx

        • Retrans Pkts Rx

        • Retrans Bytes Rx

        • Retrans Pkts Tx

        • Retrans Bytes Tx

    • IPv6 (User-Side and Inet-Side)

      • Total Pkts Rx

      • Total Bytes Rx

      • Total Pkts Tx

      • Total Bytes Tx

      • HTTP (User-Side and Inet-Side)

        • Total Pkts Rx

        • Total Bytes Rx

        • Total Pkts Tx

        • Total Bytes Tx

        • Retrans Pkts Rx

        • Retrans Bytes Rx

        • Retrans Pkts Tx

        • Retrans Bytes Tx

      • HTTPS (User-Side and Inet-Side)

        • Total Pkts Rx

        • Total Bytes Rx

        • Total Pkts Tx

        • Total Bytes Tx

        • Retrans Pkts Rx

        • Retrans Bytes Rx

        • Retrans Pkts Tx

        • Retrans Bytes Tx

show active-charging flows full all

The output of this command displays the following fields for this feature::

  • TCP Acceleration

show active-charging trigger-action name trigger_action_name

On executing the above command, the following new field(s) are displayed for this feature:

  • TCP Acceleration

  • TCP Acceleration Treshold

show active-charging trigger-condition name name

The output of this command displays the following fields for this feature:

  • Post-Processing Rule-name/GOR

  • Flow-Length Threshold exceed

Bulk Statistics

The following bulk statistics are added in the CUSP schema in support of the Inline TCP Optimization (Phase 2) feature.

Bulk Statistics

Description

tcpaccl-totflows

Indicates the total number of TCP accelerated flows.

tcpaccl-currflows

Indicates the number of current TCP accelerated flows.

tcpaccl-usr-ipv4totpkts-rx

Indicates the total number of IPv4 TCP accelerated packets received from the UE.

tcpaccl-usr-ipv4totbytes-rx

Indicates the total number of IPv4 TCP accelerated bytes received from the UE.

tcpaccl-usr-ipv4totpkts-tx

Indicates the total number of IPv4 TCP accelerated packets sent towards the UE.

tcpaccl-usr-ipv4totbytes-tx

Indicates the total number of IPv4 TCP accelerated bytes sent towards the UE.

tcpaccl-inet-ipv4totpkts-rx

Indicates the total number of IPv4 TCP accelerated packets received from the internet.

tcpaccl-inet-ipv4totbytes-rx

Indicates the total number of IPv4 TCP accelerated bytes received from the internet.

tcpaccl-inet-ipv4totpkts-tx

Indicates the total number of IPv4 TCP accelerated packets sent towards the internet.

tcpaccl-inet-ipv4totbytes-tx

Indicates the total number of IPv4 TCP accelerated bytes sent towards the internet.

tcpaccl-usr-ipv6totpkts-rx

Indicates the total number of IPv6 TCP accelerated packets received from the UE.

tcpaccl-usr-ipv6totbytes-rx

Indicates the total number of IPv6 TCP accelerated bytes received from the UE.

tcpaccl-usr-ipv6totpkts-tx

Indicates the total number of IPv6 TCP accelerated packets sent towards the UE.

tcpaccl-usr-ipv6totbytes-tx

Indicates the total number of IPv6 TCP accelerated bytes sent towards the UE.

tcpaccl-inet-ipv6totpkts-rx

Indicates the total number of IPv6 TCP accelerated packets received from the internet.

tcpaccl-inet-ipv6totbytes-rx

Indicates the total number of IPv6 TCP accelerated bytes received from the internet.

tcpaccl-inet-ipv6totpkts-tx

Indicates the total number of IPv6 TCP accelerated packets sent towards the internet.

tcpaccl-inet-ipv6totbytes-tx

Indicates the total number of IPv6 TCP accelerated bytes sent towards the internet.

The following bulk statistics are added in the CUSP schema in support of the Inline TCP Optimization (Phase 3) feature.

Bulk Statistics

Descriptions

tcpaccl-tot-subs

Indicates the total number of subscribers with atleast one TCP accelerated flow.

tcpaccl-curr-subs

Indicates the current number of active subscribers with atleast one TCP accelerated flow.

tcpaccl-ipv4-tot-tcp-flows

Indicates the total number of TCP accelerated IPv4 flows.

tcpaccl-ipv6-tot-tcp-flows

Indicates the total number of TCP accelerated IPv6 flows.

tcpaccl-ipv4-tot-http-flows

Indicates the total number of TCP accelerated IPv4 HTTP flows.

tcpaccl-ipv6-tot-http-flows

Indicates the total number of TCP accelerated IPv6 HTTP flows.

tcpaccl-ipv4-tot-https-flows

Indicates the total number of TCP accelerated IPv4 HTTPS flows.

tcpaccl-ipv6-tot-https-flows

Indicates the total number of TCP accelerated IPv6 HTTPS flows.

tcpaccl-ipv4-curr-tcp-flows

Indicates the current number of active TCP accelerated IPv4 flows.

tcpaccl-ipv6-curr-tcp-flows

Indicates the current number of active TCP accelerated IPv6 flows.

tcpaccl-ipv4-curr-http-flows

Indicates the current number of active TCP accelerated IPv4 HTTP flows.

tcpaccl-ipv6-curr-http-flows

Indicates the current number of active TCP accelerated IPv6 HTTP flows.

tcpaccl-ipv4-curr-https-flows

Indicates the current number of active TCP accelerated IPv4 HTTPS flows.

tcpaccl-ipv6-curr-https-flows

Indicates the current number of active TCP accelerated IPv6 HTTPS flows.

tcpaccl-ipv4-curr-tcp-idleflows

Indicates the current number of idle TCP accelerated IPv4 flows.

tcpaccl-ipv6-curr-tcp-idleflows

Indicates the current number of idle TCP accelerated IPv6 flows.

tcpaccl-ipv4-curr-http-idleflows

Indicates the current number of idle TCP accelerated IPV4 HTTP flows.

tcpaccl-ipv6-curr-http-idleflows

Indicates the current number of idle TCP accelerated IPV6 HTTP flows.

tcpaccl-ipv4-curr-https-idleflows

Indicates the current number of idle TCP accelerated IPV4 HTTPS flows.

tcpaccl-ipv6-curr-https-idleflows

Indicates the current number of idle TCP accelerated IPV6 HTTPS flows.

tcpaccl-ipv4-tcp-flows-idle-timeout

Indicates the total number of TCP accelerated IPv4 flows that are cleared due to idle timeout.

tcpaccl-ipv6-tcp-flows-idle-timeout

Indicates the total number of TCP accelerated IPv6 flows that are cleared due to idle timeout.

tcpaccl-ipv4-http-flows-idle-timeout

Indicates the total number of TCP accelerated IPv4 HTTP flows that are cleared due to idle timeout.

tcpaccl-ipv6-http-flows-idle-timeout

Indicates the total number of TCP accelerated IPv6 HTTP flows that are cleared due to idle timeout.

tcpaccl-ipv4-https-flows-idle-timeout

Indicates the total number of TCP accelerated IPv4 HTTPS flows that are cleared due to idle timeout.

tcpaccl-ipv6-https-flows-idle-timeout

Indicates the total number of TCP accelerated IPv6 HTTPS flows that are cleared due to idle timeout.

tcpaccl-usr-ipv4-tcpterm-rx

Indicates the total number of TCP Reset termination request received from UE for TCP accelerated IPV4 flows.

tcpaccl-usr-ipv6-tcpterm-rx

Indicates the total number of TCP Reset termination request received from UE for TCP accelerated IPV6 flows.

tcpaccl-usr-ipv4-tcpterm-tx

Indicates the total number of TCP Reset termination request sends towards UE for TCP accelerated IPV4 flows.

tcpaccl-usr-ipv6-tcpterm-tx

Indicates the total number of TCP Reset termination request sends towards UE for TCP accelerated IPV6 flows.

tcpaccl-inet-ipv4-tcpterm-rx

Indicates the total number of TCP Reset termination request received from server for TCP accelerated IPV4 flows.

tcpaccl-inet-ipv6-tcpterm-rx

Indicates the total number of TCP Reset termination request received from server for TCP accelerated IPV6 flows.

tcpaccl-inet-ipv4-tcpterm-tx

Indicates the total number of TCP Reset termination request sends towards server for TCP accelerated IPV4 flows.

tcpaccl-inet-ipv6-tcpterm-tx

Indicates the total number of TCP Reset termination request sends towards server for TCP accelerated IPV6 flows.

tcpaccl-usr-ipv4-http-totpkts-rx

Indicates the total number of IPv4 HTTP TCP accelerated packets received from the UE.

tcpaccl-usr-ipv4-http-totbytes-rx

Indicates the total number of IPv4 HTTP TCP accelerated bytes received from the UE.

tcpaccl-usr-ipv4-http-totpkts-tx

Indicates the total number of IPv4 HTTP TCP accelerated packets sent towards the UE.

tcpaccl-usr-ipv4-http-totbytes-tx

Indicates the total number of IPv4 HTTP TCP accelerated bytes sent towards the UE.

tcpaccl-inet-ipv4-http-totpkts-rx

Indicates the total number of IPv4 HTTP TCP accelerated packets received from the internet.

tcpaccl-inet-ipv4-http-totbytes-rx

Indicates the total number of IPv4 HTTP TCP accelerated bytes received from the internet.

tcpaccl-inet-ipv4-http-totpkts-tx

Indicates the total number of IPv4 HTTP TCP accelerated packets sent towards the internet.

tcpaccl-inet-ipv4-http-totbytes-tx

Indicates the total number of IPv4 HTTP TCP accelerated bytes sent towards the internet.

tcpaccl-usr-ipv6-http-totpkts-rx

Indicates the total number of IPv6 HTTP TCP accelerated packets received from the UE.

tcpaccl-usr-ipv6-http-totbytes-rx

Indicates the total number of IPv6 HTTP TCP accelerated bytes received from the UE.

tcpaccl-usr-ipv6-http-totpkts-tx

Indicates the total number of IPv6 HTTP TCP accelerated packets sent towards the UE.

tcpaccl-usr-ipv6-http-totbytes-tx

Indicates the total number of IPv6 HTTP TCP accelerated bytes sent towards the UE.

tcpaccl-inet-ipv6-http-totpkts-rx

Indicates the total number of IPv6 HTTP TCP accelerated packets received from the internet.

tcpaccl-inet-ipv6-http-totbytes-rx

Indicates the total number of IPv6 HTTP TCP accelerated bytes received from the internet.

tcpaccl-inet-ipv6-http-totpkts-tx

Indicates the total number of IPv6 HTTP TCP accelerated packets sent towards the internet.

tcpaccl-inet-ipv6-http-totbytes-tx

Indicates the total number of IPv6 HTTP TCP accelerated bytes sent towards the internet.

tcpaccl-usr-ipv4-https-totpkts-rx

Indicates the total number of IPv4 HTTPS TCP accelerated packets received from the UE.

tcpaccl-usr-ipv4-https-totbytes-rx

Indicates the total number of IPv4 HTTPS TCP accelerated bytes received from the UE.

tcpaccl-usr-ipv4-https-totpkts-tx

Indicates the total number of IPv4 HTTPS TCP accelerated packets sent towards the UE.

tcpaccl-usr-ipv4-https-totbytes-tx

Indicates the total number of IPv4 HTTPS TCP accelerated bytes sent towards the UE.

tcpaccl-inet-ipv4-https-totpkts-rx

Indicates the total number of IPv4 HTTPS TCP accelerated packets received from the internet.

tcpaccl-inet-ipv4-https-totbytes-rx

Indicates the total number of IPv4 HTTPS TCP accelerated bytes received from the internet.

tcpaccl-inet-ipv4-https-totpkts-tx

Indicates the total number of IPv4 HTTPS TCP accelerated packets sent towards the internet.

tcpaccl-inet-ipv4-https-totbytes-tx

Indicates the total number of IPv4 HTTPS TCP accelerated bytes sent towards the internet.

tcpaccl-usr-ipv6-https-totpkts-rx

Indicates the total number of IPv6 HTTPS TCP accelerated packets received from the UE.

tcpaccl-usr-ipv6-https-totbytes-rx

Indicates the total number of IPv6 HTTPS TCP accelerated bytes received from the UE.

tcpaccl-usr-ipv6-https-totpkts-tx

Indicates the total number of IPv6 HTTPS TCP accelerated packets sent towards the UE.

tcpaccl-usr-ipv6-https-totbytes-tx

Indicates the total number of IPv6 HTTPS TCP accelerated bytes sent towards the UE.

tcpaccl-inet-ipv6-https-totpkts-rx

Indicates the total number of IPv6 HTTPS TCP accelerated packets received from the internet.

tcpaccl-inet-ipv6-https-totbytes-rx

Indicates the total number of IPv6 HTTPS TCP accelerated bytes received from the internet.

tcpaccl-inet-ipv6-https-totpkts-tx

Indicates the total number of IPv6 HTTPS TCP accelerated packets sent towards the internet.

tcpaccl-inet-ipv6-https-totbytes-tx

Indicates the total number of IPv6 HTTPS TCP accelerated bytes sent towards the internet.

tcpaccl-usr-ipv4-http-pktsretrans-tx

Indicates the total number of packets retransmitted towards the UE for TCP accelerated IPV4 HTTP flows.

tcpaccl-usr-ipv4-http-pktsretrans-rx

Indicates the total number of retransmitted packets received from the UE for TCP accelerated IPV4 HTTP flows.

tcpaccl-usr-ipv4-http-bytesretrans-tx

Indicates the total number of bytes retransmitted towards the UE for TCP accelerated IPV4 HTTP flows.

tcpaccl-usr-ipv4-http-bytesretrans-rx

Indicates the total number of retransmitted bytes received from the UE for TCP accelerated IPV4 HTTP flows.

tcpaccl-inet-ipv4-http-pktsretrans-tx

Indicates the total number of packets retransmitted towards the server for TCP accelerated IPV4 HTTP flows.

tcpaccl-inet-ipv4-http-pktsretrans-rx

Indicates the total number of retransmitted packets received from the server for TCP accelerated IPV4 HTTP flows.

tcpaccl-inet-ipv4-http-bytesretrans-tx

Indicates the total number of bytes retransmitted towards the server for TCP accelerated IPV4 HTTP flows.

tcpaccl-inet-ipv4-http-bytesretrans-rx

Indicates the total number of retransmitted bytes received from the server for TCP accelerated IPV4 HTTP flows.

tcpaccl-usr-ipv6-http-pktsretrans-tx

Indicates the total number of packets retransmitted towards the UE for TCP accelerated IPV6 HTTP flows.

tcpaccl-usr-ipv6-http-pktsretrans-rx

Indicates the total number of retransmitted packets received from the UE for TCP accelerated IPV6 HTTP flows.

tcpaccl-usr-ipv6-http-bytesretrans-tx

Indicates the total number of bytes retransmitted towards the UE for TCP accelerated IPV6 HTTP flows.

tcpaccl-usr-ipv6-http-bytesretrans-rx

Indicates the total number of retransmitted bytes received from the UE for TCP accelerated IPV6 HTTP flows.

tcpaccl-inet-ipv6-http-pktsretrans-tx

Indicates the total number of packets retransmitted towards the server for TCP accelerated IPV6 HTTP flows.

tcpaccl-inet-ipv6-http-pktsretrans-rx

Indicates the total number of retransmitted packets received from the server for TCP accelerated IPV6 HTTP flows.

tcpaccl-inet-ipv6-http-bytesretrans-rx

Indicates the total number of retransmitted bytes received from the server for TCP accelerated IPV6 HTTP flows.

tcpaccl-usr-ipv4-https-pktsretrans-tx

Indicates the total number of packets retransmitted towards the UE for TCP accelerated IPV4 HTTPS flows.

tcpaccl-usr-ipv4-https-pktsretrans-rx

Indicates the total number of retransmitted packet received from the UE for TCP accelerated IPV4 HTTPS flows.

tcpaccl-usr-ipv4-https-bytesretrans-tx

Indicates the total number of bytes retransmitted towards the UE for TCP accelerated IPV4 HTTPS flows.

tcpaccl-usr-ipv4-https-bytesretrans-rx

Indicates the total number of retransmitted bytes received from the UE for TCP accelerated IPV4 HTTPS flows.

tcpaccl-inet-ipv4-https-pktsretrans-tx

Indicates the total number of packets retransmitted towards the server for TCP accelerated IPV4 HTTPS flows.

tcpaccl-inet-ipv4-https-pktsretrans-rx

Indicates the total number of retransmitted packet received from the server for TCP accelerated IPV4 HTTPS flows.

tcpaccl-inet-ipv4-https-bytesretrans-tx

Indicates the total number of bytes retransmitted towards the server for TCP accelerated IPV4 HTTPS flows.

tcpaccl-inet-ipv4-https-bytesretrans-rx

Indicates the total number of retransmitted bytes received from the server for TCP accelerated IPV4 HTTPS flows.

tcpaccl-usr-ipv6-https-pktsretrans-tx

Indicates the total number of retransmitted bytes received from the server for TCP accelerated IPV4 HTTPS flows.

tcpaccl-usr-ipv6-https-pktsretrans-tx

Indicates the total number of packets retransmitted towards the UE for TCP accelerated IPV6 HTTPS flows.

tcpaccl-usr-ipv6-https-pktsretrans-rx

Indicates the total number of retransmitted packets received from the UE for TCP accelerated IPV6 HTTPS flows.

tcpaccl-usr-ipv6-https-bytesretrans-tx

Indicates the total number of bytes retransmitted towards the UE for TCP accelerated IPV6 HTTPS flows.

tcpaccl-usr-ipv6-https-bytesretrans-rx

Indicates the total number of retransmitted bytes received from the UE for TCP accelerated IPV6 HTTPS flows.

tcpaccl-inet-ipv6-https-pktsretrans-tx

Indicates the total number of packets retransmitted towards the server for TCP accelerated IPV6 HTTPS flows.

tcpaccl-inet-ipv6-https-pktsretrans-rx

Indicates the total number of retransmitted packets received from the server for TCP accelerated IPV6 HTTPS flows.

tcpaccl-inet-ipv6-https-bytesretrans-tx

Indicates the total number of bytes retransmitted towards the server for TCP accelerated IPV6 HTTPS flows.

tcpaccl-inet-ipv6-https-bytesretrans-rx

Indicates the total number of retransmitted bytes received from the server for TCP accelerated IPV6 HTTPS flows.