- About this Guide
- Evolved Packet Data Gateway Overview
- Configuring the Evolved Packet Data Gateway
- Monitoring the Evolved Packet Data Gateway
- AAA based PGW Selection for ePDG Initial Attach
- Custom S2B to SWu error code mapping
- EAP-PEAP/MSCHAPv2 Support
- ePDG Auth Bulkstats for Non-UICC/UICC
- ePDG DDoS Attack Mitigation
- ePDG IMSI Privacy Support
- ePDG International Roaming - Redirection Based on Outer IP
- ePDG MOBIKE Support
- ePDG Modify Bearer Command Support
- ePDG P-CSCF Restoration Support
- ePDG Roaming Support
- ePDG S2b Piggybacking Support
- Hardware Crypto Assist for ePDG
- Idle Seconds Micro-checkpoint
- IFTASK Restart Capability for ePDG
- IMSI Encryption Support
- Multiple ePDG Certificates Support
- Network Provided User Location Information reporting extensions over S2b interface
- Packet Capture (PCAP) Trace
- Pre-ESP Fragmentation Support
- RAN/NAS Cause IE support in S2b Messages
- Release 13 Emergency PDN support
- Send DSReq if new PGW is selected during re-attach
- Sending SWm 3GPP AAA FQDN Address in CSReq
- Send User location info to PGW
- Smart Licensing On/Off for CP Owned Licenses
- Support for 3gpp IKEv2 Private Notify Error Types
- Support for RFC 5685 Redirect Mechanism for Internet Key Exchange Protocol V2(IKEv2)
- Transition Rate KPIs
- Tunnelling of Explicit Congestion Notification
- User Equipment Identity in IKE_AUTH Message
- Evolved Packet Data Gateway Engineering Rules
- IKEv2 Error Codes and Notifications
About this Guide
This preface describes the ePDG Administration Guide, how it is organized, and its document conventions.
The guide describes the ePDG (Evolved Packet Data Gateway) and includes network deployments and interfaces, feature descriptions, session flows, configuration instructions, and CLI commands for monitoring and troubleshooting the system. It also contains a sample ePDG configuration file and ePDG engineering rules.
Feedback