System Logs

This chapter describes how to configure parameters related to the various types of logging and how to viewing their content. It includes the following sections:

Feature Summary and Revision History

Summary Data

Applicable Product(s) or Functional Area

All

Applicable Platform(s)

  • ASR 5500

  • UGP

  • VPC-DI

  • VPC-SI

Feature Default

Enabled

Related Changes in This Release:

Not Applicable

Related Documentation

  • ASR 5500 System Administration Guide

  • Command Line Interface Reference

  • VPC-DI System Administration Guide

  • VPC-SI System Administration Guide

Revision History


Note

Revision history details are not provided for features introduced before releases 21.2 and N5.5.


Revision Details

Release

The Syslog client within StarOS has been updated in this release to support RFC5424 and the syslog messaging standards defined within this standard. StarOS continues to support the previous RFC3164 message formats. In this release, you can also configure multiple syslog server IP addresses with multiple ports.

Note 

Release 21.6 supports transport layer messaging with UDP only. TLS and TCP are not supported in this release.

21.6

Two new critical CLI event logs and two new SNMP Traps are added to provide notification if an administrator disables logging entirely for an Event ID or Event ID range, or changes the logging level below default logging level (error level). These event logs and traps are enabled by default in this release, and cannot be disabled. Refer to Global Configuration Mode Filtering for more information.

No commands have been added or modified as a result of this feature.

The show snmp trap statistics command output was expanded to show details in the event that logging events have been disabled or logging level has been changed below the default (error) logging level.

21.3

First introduced.

Pre 21.2

System Log Types

There are five types of logs that can be configured and viewed on the system:


Important

Not all Event Logs can be configured on all products. Configurability depends on the hardware platform and licenses in use.


  • Event: Event logging can be used to determine system status and capture important information pertaining to protocols and tasks in use by the system. This is a global function that will be applied to all contexts, sessions, and processes.

  • Active: Active logs are operator configurable on a CLI instance-by-CLI instance basis. Active logs configured by an administrative user in one CLI instance cannot be viewed by an administrative user in a different CLI instance. Each active log can be configured with filter and display properties that are independent of those configured globally for the system. Active logs are displayed in real time as events are generated.

  • Trace: Trace logging can be used to quickly isolate issues that may arise for a particular connected subscriber session. Traces can be taken for a specific call identification (callid) number, IP address, mobile station identification (MSID) number, or username.

  • Monitor: Monitor logging records all activity associated with a particular session. This functionality is available in order to comply with law enforcement agency requirements for monitoring capabilities of particular subscribers. Monitors can be performed based on a subscriber's MSID or username.

  • Crash: Crash logging stores useful information pertaining to system software crashes. This information is useful in determining the cause of the crash.


Important

Stateful Firewall and NAT supports logging of various messages on screen if logging is enabled for firewall. These logs provide detailed messages at various levels, like critical, error, warning, and debug. Stateful Firewall and NAT attack logs also provide information on the source IP address, destination IP address, protocol, or attack type for any packet dropped due to an attack and are also sent to a syslog server if configured in the system. For more information on logging support for Stateful Firewall and NAT, see the Logging Support chapter of PSF Administration Guide or NAT Administration Guide.

Configuring Event Logging Parameters

The system can be configured to generate logs based on user-defined filters. The filters specify the facilities (system tasks or protocols) that the system is to monitor and severity levels at which to trigger the generation of the event entries.

Event logs are stored in system memory and can be viewed via the CLI. There are two memory buffers that store event logging information. The first buffer stores the active log information. The second buffer stores inactive logging information. The inactive buffer is used as a temporary repository to allow you to view logs without having data be overwritten. Logs are copied to the inactive buffer only through manual intervention.

Each buffer can store up to 50,000 events. Once these buffers reach their capacity, the oldest information is removed to make room for the newest.

To prevent the loss of log data, the system can be configured to transmit logs to a syslog server over a network interface.


Important

For releases after 15.0 MR4, TACACS+ accounting (CLI event logging) will not be generated for Lawful Intercept users (priv-level 15 and 13).


Configuring Event Log Filters

You can filter the contents of event logs at the Exec mode and Global Configuration mode levels. For additional information, see the Command Line Interface Reference.

Exec Mode Filtering

These commands allow you to limit the amount of data contained in logs without changing global logging parameters.

Follow the examples below to filter logs via Exec mode commands.

Active Filtering
logging active [ copy runtime filters ] [ event-verbosity event_level ] [ pdu-data format ] [ pdu-verbosity pdu_level ] 

Notes:

  • copy runtime filters   â€“ Copies the runtime filters and uses that copy to filter the current logging session.

  • event-verbosity event_level – Specifies the level of verboseness to use in logging of events as one of:
    • min – Displays minimal information about the event. Information includes event name, facility, event ID, severity level, date, and time.

    • concise – Displays detailed information about the event, but does not provide the event source within the system.

    • full – Displays detailed information about event, including source information, identifying where within the system the event was generated.

  • pdu-data format – Specifies output format for packet data units when logged as one of:
    • none – raw format (unformatted).

    • hex – hexadecimal format

    • hex-ascii – hexadecimal and ASCII similar to a main-frame dump

  • pdu-verbosity pdu_level – Specifies the level of verboseness to use in logging of packet data units as an integer from 1 through 5, where 5 is the most detailed.

    Save the configuration as described in the Verifying and Saving Your Configuration chapter.

Disable or Enable Filtering by Instance(s)
logging filter active facility facility level severity_level [ critical-info | no-critical-info ] 
logging filter { disable | enable } facility facility { all | instance instance_number } 

Notes:

  • active – Indicates that only active processes are to have logging options set.

  • disable – Disables logging for a specific instance or all instances. This keyword is only supported for aaamgr, hamgr and sessmgr facilities.

  • enable – Enables logging for a specific instance or all instances. This keyword is only supported for aaamgr, hamgr and sessmgr facilities. By default logging is enabled for all instances of aaamgr, hamgr and sessmgr.

  • facility facility and level severity_level – Configure the logging filter that determines which system facilities should be logged and at what levels. For detailed information, see Specifying Facilities and Event Severities.

  • all | instance instance_number – Specifies whether logging will be disabled or enabled for all instances or a specific instance of aaamgr, hamgr or sessmgr. Run the show session subsystem facility facility command to identify specific instance numbers.


    Note

    These keywords are only supported with the disable and enable keywords.


  • level severity_level – Specifies the level of information to be logged from the following list which is ordered from highest to lowest:
    • critical - display critical events

    • error - display error events and all events with a higher severity level

    • warning - display warning events and all events with a higher severity level

    • unusual - display unusual events and all events with a higher severity level

    • info - display info events and all events with a higher severity level

    • trace - display trace events and all events with a higher severity level

    • debug - display all events


    Note

    This keyword is only supported in conjunction with the active keyword.


  • critical-info – Specifies that events with a category attribute of critical information are to be displayed. Examples of these types of events can be seen at bootup when system processes and tasks are being initiated. This is the default setting.

    no-critical-info – Specifies that events with a category attribute of critical information are not to be displayed.


    Note

    These keywords are only supported in conjunction with the active keyword.



Important

To enable logging of a single instance of a facility, you must first disable all instances of the facility (logging filter disable facility facility all) and then enable logging of the specific instance (logging filter enable facility facility instance instance_number. To restore default behavior you must re-enable logging of all instances (logging filter enable facility facility all).


You can display the instance numbers for enabled instances per facility using the Exec mode show instance-logging command.

Global Configuration Mode Filtering

You can filter the contents of event logs at the Exec mode and Global Configuration mode levels.

Follow the example below to configure run time event logging parameters for the system:

configure 
   logging filter runtime facility facility level report_level 
   logging display { event-verbosity | pdu-data | pdu-verbosity } 
   end 

Notes:

  • facility facility and level severity_level – Configure the logging filter that determines which system facilities should be logged and at what levels. For detailed information, see Specifying Facilities and Event Severities.

  • Repeat for every facility that you would like to log.

  • Optional: Configure event ID restrictions by adding the logging disable eventid command. The system provides the ability to restrict the sending of a specific event ID or a range of event IDs to minimize the amount of data logged to that which is most useful. Repeat to disable logging for additional event IDs or event ID ranges.

  • If an administrator restricts event logging for an Event ID or Event ID range using the above command (logging disable eventid ), the system will generate a Critical Event log "cli 30999 critical" as well as an SNMP trap "1361 (DisabledEventIDs)" with the specific Event IDs or Event ID range that was disabled.

    These event logs and traps are enabled by default in this release, and cannot be disabled.

  • If an administrator lowers the logging level (using the logging filter runtime facility facility level report_level command below the default level of "error", the system will generate a Critical Event log "cli 30998 critical" as well as an SNMP trap "1362 (LogLevelChanged)" with the specific Event IDs or Event ID range that was disabled.

    These event logs and traps are enabled by default in this release, and cannot be disabled.

The following examples show the CLI output of the traps generated when event logging or logging levels are changed.
[local]host# show snmp trap statistics
SNMP Notification Statistics:
  ...
Trap Name                            #Gen #Disc  Disable Last Generated      
----------------------------------- ----- -----  ------- --------------------
…
DisabledEventIDs                        1     0       0  2017:05:11:15:35:25 
LogLevelChanged                         2     0       0  2017:05:11:15:28:03 
[local]host# show snmp trap history
There are x historical trap records (5000 maximum)

Timestamp                Trap Information
------------------------ -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
…
Thu May 11 15:28:03 2017 Internal trap notification 1362 (LogLevelChanged) Logging level of facility resmgr is changed to critical by user #initial-config# context local privilege level Security Administrator ttyname /dev/pts/0 address type IPV4 remote ip address 0.0.0.0
…
Thu May 11 15:35:25 2017 Internal trap notification 1361 (DisabledEventIDs) Event IDs from 100 to 1000 have been disabled by user adminuser context context privilege level security administrator ttyname tty address type IPV4 remote ip address 1.2.3.4
…
Mon May 15 10:14:56 2017 Internal trap notification 1362 (LogLevelChanged) Logging level of facility sitmain is changed to critical by user staradmin context local privilege level Security Administrator ttyname /dev/pts/1 address type IPV4 remote ip address 161.44.190.27

Save the configuration as described in the Verifying and Saving Your Configuration chapter.

Configuring Syslog Servers

Syslog Architecture

System Logging (syslog) is the architecture which produces and sends event information from StarOS over the UDP transport layer to a centralized Event Message Collector. Syslog uses a client-server architecture:

  • Syslog Client: A set of processes running on StarOS products which operate as the sending device for event messages.

  • Syslog Server: An external server configured to receive the event messages sent from StarOS products.

StarOS products transport event messages using the Syslog Protocol without expecting acknowledgement of receipt. The system forwards event messages regardless if a Syslog Server is available to receive the messages.

Configuring the System to Sent Event Messages to an External Syslog Server

Information generated by the run time event logging filters can be transmitted to a syslog server for permanent storage.


Important

The data transmitted to the Syslog server is meant to be used for informational purposes. Functions such as billing and performance monitoring should not be based on syslogs.



Important

Although the system provides the flexibility to configure syslog servers on a context-by-context basis, it is recommended that all servers be configured in the local context in order to isolate the log traffic from the network traffic.


Use the following example to configure syslog servers:

configure 
   context local 
      logging syslog ip_address   
      end 

Notes:

  • ip_address specifies the IP address of a system log server on the network in IPv4 dotted-decimal or IPv6 colon-separated-hexadecimal notation.

  • Several optional keywords are available for the logging syslog command. Refer to the Context Configuration Mode Commands chapter in the Command Line Interface Reference for more information.

  • Repeat as necessary to configure additional syslog servers. There is no limit to the number of syslog servers that can be configured.

Refer to the logging command in the Command Line Reference, Modes C-D for more information.

Save the configuration as described in the Verifying and Saving Your Configuration chapter.

Configuring Active Logs

Active logs are event logs that are operator configurable on a CLI instance-by-CLI instance basis. Active logs configured by an administrative user in one CLI instance are not displayed to an administrative user in a different CLI instance. Each active log can be configured with filter and display properties that are independent of those configured globally for the system. Active logs are displayed in real time as they are generated.

Active logs are not written to the active memory buffer by default. To write active logs to the active memory buffer execute the following command in the Global Configuration mode:

[local]host_name(config)# logging runtime buffer store all-events 

When active logs are written to the active memory buffer, they are available to all users in all CLI instances.

Use the following example to configure active logging in Global Configuration mode:

[local]host_name(config)# logging filter runtime facility facility level report_level 
Notes:
  • Configure the logging filter that determines which system facilities should be logged and at what levels. For detailed information, see Specifying Facilities and Event Severities.
  • Repeat for every facility that you would like to log.
  • Optional: Configure event ID restrictions by adding the logging disable eventid command. The system provides the ability to restrict the sending of a specific event ID or a range of event IDs to minimize the amount of data logged to that which is most useful. Repeat to disable logging for additional event IDs or event ID ranges.
  • A number of keyword options/variables are available for the Exec mode logging active command. Refer to the Exec Mode Commands chapter in the Command Line Interface Reference for more information.

Once all of the necessary information has been gathered, the Active log display can be stopped by entering the following command in the Exec mode:

no logging active 

Specifying Facilities


Important

The actual facilities available for logging vary by platform type, StarOS version and installed product licenses.

The following facilities can be configured for logging event data:

  • a10: A10 interface facility

  • a11: A11 interface facility

  • a11mgr: A11 Manager facility

  • aaa-client: Authentication, Authorization and Accounting (AAA) client facility

  • aaamgr: AAA manager logging facility

  • aaaproxy: AAA Proxy facility

  • aal2: ATM Adaptation Layer 2 (AAL2) protocol logging facility

  • acl-log: Access Control List (ACL) logging facility

  • acsctrl: Active Charging Service (ACS) Controller facility

  • acsmgr: ACS Manager facility

  • afctrl: Fabric Controller facility [ASR 5500 only]

  • afmgr: Fabric Manager logging facility [ASR 5500 only]

  • alarmctrl: Alarm Controller facility

  • alcap: Access Link Control Application Part (ALCAP) protocol logging facility

  • alcapmgr: ALCAP manager logging facility

  • all: All facilities

  • bfd: Bidirectional Forwarding Detection (BFD) protocol logging facility

  • bgp: Border Gateway Protocol (BGP) facility

  • bindmux: IPCF BindMux-Demux Manager logging facility

  • bngmgr: Broadband Network Gateway (BNG) Demux Manager logging facility

  • bssap+: Base Station Sub-system Application Part+ protocol facility for the login interface between the SGSN and the MSC/VLR (2.5G and 3G)

  • bssgp: Base Station Sub-system GPRS Protocol logging facility handles exchange information between the SGSN and the BSS (2.5G only)

  • callhome: Call Home application logging facility

  • cap: CAMEL Application Part (CAP) logging facility for protocol used in prepaid applications (2.5G and 3G)

  • cbsmgr: Cell Broadcasting Service (CBS) logging facility [HNBGW]

  • cdf: Charging Data Function (CDF) logging facility

  • cfctrl: Content filtering controller logging facility

  • cfmgr: Content filtering manager logging facility

  • cgw: Converged Access Gateway (CGW) logging facility

  • cli: Command Line Interface (CLI) logging facility

  • cmp: Certificate Management Protocol (IPSec) logging facility

  • confdmgr: ConfD Manager proclet (NETCONF) logging facility

  • connectedapps: SecGW ASR 9000 oneP communication procotol

  • connproxy: Controller Proxy logging facility

  • credit-control: Credit Control (CC) facility

  • csp: Card/Slot/Port controller facility

  • css: Content Service Selection (CSS) facility

  • css-sig: CSS RADIUS Signaling facility

  • cx-diameter: Cx Diameter Messages facility [CSCF <--> HSS]

  • data-mgr: Data Manager Framework logging facility

  • dcardctrl: IPSec Daughter Card Controller logging facility

  • dcardmgr: IPSec Daughter Card Manager logging facility

  • demuxmgr: Demux Manager API facility

  • dgmbmgr: Diameter Gmb Application Manager logging facility

  • dhcp: Dynamic Host Configuration Protocol (DHCP) logging facility

  • dhcpv6: DHCPv6

  • dhost: Distributed Host logging facility

  • diabase: Diabase messages facility

  • diactrl: Diameter Controller proclet logging facility

  • diameter: Diameter endpoint logging facility

  • diameter-acct: Diameter Accounting

  • diameter-auth: Diameter Authentication

  • diameter-dns: Diameter DNS subsystem

  • diameter-ecs: ACS Diameter signaling facility

  • diameter-engine: Diameter version2 engine logging facility

  • diameter-hdd: Diameter Horizontal Directional Drilling (HDD) Interface facility

  • diameter-svc: Diameter Service

  • diamproxy: DiamProxy logging facility

  • doulosuemgr: Doulos (IMS-IPSec-Tool) user equipment manager

  • dpath: IPSec Data Path logging facility

  • drvctrl: Driver Controller logging facility

  • eap-diameter: Extensible Authentication Protocol (EAP) IP Sec urity facility

  • eap-ipsec: Extensible Authentication Protocol (EAP) IPSec facility

  • eap-sta-s6a-s13-s6b-diameter: EAP/STA/S6A/S13/S6B Diameter messages facility

  • ecs-css: ACSMGR <-> Session Manager Signalling Interface facility

  • egtpc: eGTP-C logging facility

  • egtpmgr: enhanced GPRS Tunneling Protocol (eGTP) manager logging facility

  • egtpu: eGTP-U logging facility

  • embms: evolved Multimedia Broadcast Multicast Services Gateway facility

  • embms: eMBMS Gateway Demux facility

  • epdg: evolved Packet Data (ePDG) gateway logging facility

  • event-notif: Event Notification Interface logging facility

  • evlog: Event log facility

  • famgr: Foreign Agent manager logging facility

  • firewall: Firewall logging facility

  • fng: Femto Network Gateway (FNG) logging facility

  • gbmgr: SGSN Gb Interface Manager facility

  • gmm:

    • For 2.5G: Logs the GPRS Mobility Management (GMM) layer (above LLC layer)

    • For 3G: Logs the access application layer (above the RANAP layer)

  • gprs-app: GPRS Application logging facility

  • gprs-ns: GPRS Network Service Protocol (layer between SGSN and the BSS) logging facility

  • gq-rx-tx-diameter: Gq/Rx/Tx Diameter messages facility

  • gss-gcdr: GTPP Storage Server GCDR facility

  • gtpc: GTP-C protocol logging facility

  • gtpcmgr: GTP-C protocol manager logging facility

  • gtpp: GTP-prime protocol logging facility

  • gtpu: GTP-U protocol logging facility

  • gtpumgr: GTP-U Demux manager

  • gx-ty-diameter: Gx/Ty Diameter messages facility

  • gy-diameter: Gy Diameter messages facility

  • h248prt: H.248 port manager facility

  • hamgr: Home Agent manager logging facility

  • hat: High Availability Task (HAT) process facility

  • hdctrl: HD Controller logging facility

  • henbapp: Home Evolved NodeB (HENB) App facility (Do not use this keyword for HENB-GW in Release 20)

  • henbgw: HENB-GW facility (Do not use this keyword for HENB-GW in Release 20)

  • henbgw-pws: HENB-GW Public Warning System logging facility (Do not use this keyword for HENB-GW in Release 20)

  • henbgw-sctp-acs: HENB-GW access Stream Control Transmission Protocol (SCTP) facility (Do not use this keyword for HENB-GW in Release 20)

  • henbgw-sctp-nw: HENBGW network SCTP facility (Do not use this keyword for HNB-GW in Release 20)

  • henbgwdemux: HENB-GW Demux facility (Do not use this keyword for HNB-GW in Release 20)

  • henbgwmgr: HENB-GW Manager facility (Do not use this keyword for HNB-GW in Release 20)

  • hnb-gw: HNB-GW (3G Femto GW) logging facility (Do not use this keyword for HNB-GW in Release 20)

  • hnbmgr: HNB-GW Demux Manager logging facility (Do not use this keyword for HNB-GW in Release 20)

  • hss-peer-service: Home Subscriber Server (HSS) Peer Service facility

  • iftask: Internal Forwarder Task (Intel DPDK) used on VPC-SI and VPC-DI platforms

  • igmp: Internet Group Management Protocol (IGMP)

  • ikev2: Internet Key Exchange version 2 (IKEv2)

  • ims-authorizatn: IP Multimedia Subsystem (IMS) Authorization Service facility

  • ims-sh: HSS Diameter Sh Interface Service facility

  • imsimgr: SGSN IMSI Manager facility

  • imsue: IMS User Equipment (IMSUE) facility

  • ip-arp: IP Address Resolution Protocol facility

  • ip-interface: IP interface facility

  • ip-route: IP route facility

  • ipms: Intelligent Packet Monitoring System (IPMS) logging facility

  • ipne: IP Network Enabler (IPNE) facility

  • ipsec: IP Security logging facility

  • ipsecdemux: IPSec demux logging facility

  • ipsg: IP Service Gateway interface logging facility

  • ipsgmgr: IP Services Gateway facility

  • ipsp: IP Pool Sharing Protocol logging facility

  • kvstore: Key/Value Store (KVSTORE) Store facility

  • l2tp-control: Layer 2 Tunneling Protocol (L2TP) control logging facility

  • l2tp-data: L2TP data logging facility

  • l2tpdemux: L2TP Demux Manager logging facility

  • l2tpmgr: L2TP Manager logging facility

  • lagmgr: Link Aggregation Group (LAG) manager logging facility

  • lcs: Location Services (LCS) logging facility

  • ldap: Lightweight Directory Access Protocol (LDAP) messages logging facility

  • li: Refer to the Lawful Intercept Configuration Guide for a description of this command.

  • linkmgr: SGSN/BSS SS7 Link Manager logging facility (2.5G only)

  • llc: Logical Link Control (LLC) Protocol logging facility; for SGSN: logs the LLC layer between the GMM and the BSSGP layers for logical links between the MS and the SGSN

  • local-policy: Local Policy Service facility

  • location-service: Location Services facility

  • m3ap: M3 Application Protocol facility

  • m3ua: M3UA Protocol logging facility

  • magmgr: Mobile Access Gateway manager logging facility

  • map: Mobile Application Part (MAP) protocol logging facility

  • megadiammgr: MegaDiameter Manager (SLF Service) logging facility

  • mme-app: Mobility Management Entity (MME) Application logging facility

  • mme-embms: MME evolved Multimedia Broadcast Multicast Service facility

  • mme-misc: MME miscellaneous logging facility

  • mmedemux: MME Demux Manager logging facility

  • mmemgr: MME Manager facility

  • mmgr: Master Manager logging facility

  • mobile-ip: Mobile IP processes

  • mobile-ip-data: Mobile IP data facility

  • mobile-ipv6: Mobile IPv6 logging facility

  • mpls: Multiprotocol Label Switching (MPLS) protocol logging facility

  • mrme: Multi Radio Mobility Entity (MRME) logging facility

  • mseg-app: Mobile Services Edge Gateway (MSEG) application logging facility (This option is not supported in this release.)

  • mseg-gtpc: MSEG GTP-C application logging facility (This option is not supported in this release.)

  • mseg-gtpu: MSEG GTP-U application logging facility (This option is not supported in this release.)

  • msegmgr: MSEG Demux Manager logging facility (This option is not supported in this release.)

  • mtp2: Message Transfer Part 2 (MTP2) Service logging facility

  • mtp3: Message Transfer Part 3 (MTP3) Protocol logging facility

  • multicast-proxy: Multicast Proxy logging facility

  • nas: Non-Access Stratum (NAS) protocol logging facility [MME 4G]

  • netwstrg: Network Storage facility

  • npuctrl: Network Processor Unit Control facility

  • npumgr: Network Processor Unit Manager facility

  • npumgr-acl: NPUMGR ACL logging facility

  • npumgr-drv: NPUMGR DRV logging facility

  • npumgr-flow: NPUMGR FLOW logging facility

  • npumgr-fwd: NPUMGR FWD logging facility

  • npumgr-init: NPUMGR INIT logging facility

  • npumgr-lc: NPUMGR LC logging facility

  • npumgr-port: NPUMGR PORT logging facility

  • npumgr-recovery: NPUMGR RECOVERY logging facility

  • npumgr-rri: NPUMGR RRI (Reverse Route Injection) logging facility

  • npumgr-vpn: NPUMGR VPN logging facility

  • ntfy-intf: Notification Interface logging facility [Release 12.0 and earlier versions only]

  • ocsp: Online Certificate Status Protocol logging facility.

  • orbs: Object Request Broker System logging facility

  • ospf: OSPF protocol logging facility

  • ospfv3: OSPFv3 protocol logging facility

  • p2p: Peer-to-Peer Detection logging facility

  • pagingmgr: PAGINGMGR logging facility

  • pccmgr: Intelligent Policy Control Function (IPCF) Policy Charging and Control (PCC) Manager library

  • pdg: Packet Data Gateway (PDG) logging facility

  • pdgdmgr: PDG Demux Manager logging facility

  • pdif: Packet Data Interworking Function (PDIF) logging facility

  • pgw: Packet Data Network Gateway (PGW) logging facility

  • pmm-app: Packet Mobility Management (PMM) application logging facility

  • ppp: Point-To-Point Protocol (PPP) link and packet facilities

  • pppoe: PPP over Ethernet logging facility

  • proclet-map-frwk: Proclet mapping framework logging facility

  • push: VPNMGR CDR push logging facility

  • radius-acct: RADIUS accounting logging facility

  • radius-auth: RADIUS authentication logging facility

  • radius-coa: RADIUS change of authorization and radius disconnect

  • ranap: Radio Access Network Application Part (RANAP) Protocol facility logging info flow between SGSN and RNS (3G)

  • rct: Recovery Control Task logging facility

  • rdt: Redirect Task logging facility

  • resmgr: Resource Manager logging facility

  • rf-diameter: Diameter Rf interface messages facility

  • rip: Routing Information Protocol (RIP) logging facility [RIP is not supported at this time.]

  • rlf: Rate Limiting Function (RLF) logging facility

  • rohc: Robust Header Compression (RoHC) facility

  • rsvp: Reservation Protocol logging facility

  • rua: RANAP User Adaptation (RUA) [3G Femto GW - RUA messages] logging facility

  • s102: S102 protocol logging facility

  • s102mgr: S102Mgr logging facility

  • s1ap: S1 Application Protocol (S1AP) Protocol logging facility

  • sabp: Service Area Broadcast Protocol (SABP) logging facility

  • saegw: System Architecture Evolution (SAE) Gateway facility

  • sbc: SBc protocol logging facility

  • sccp: Signalling Connection Control Part (SCCP) Protocol logging (connection-oriented messages between RANAP and TCAP layers).

  • sct: Shared Configuration Task logging facility

  • sctp: Stream Control Transmission Protocol (SCTP) Protocol logging facility

  • sef_ecs: Severely Errored Frames (SEF) APIs printing facility

  • sess-gr: SM GR facility

  • sessctrl: Session Controller logging facility

  • sessmgr: Session Manager logging facility

  • sesstrc: session trace logging facility

  • sft: Switch Fabric Task logging facility

  • sgs: SGs interface protocol logging facility

  • sgsn-app: SGSN-APP logging various SGSN "glue" interfaces (for example, between PMM, MAP, GPRS-FSM, SMS).

  • sgsn-failures: SGSN call failures (attach/activate rejects) logging facility (2.5G)

  • sgsn-gtpc: SGSN GTP-C Protocol logging control messages between the SGSN and the GGSN

  • sgsn-gtpu: SGSN GTP-U Protocol logging user data messages between the SGSN and GGSN

  • sgsn-mbms-bearer: SGSN Multimedia Broadcast/Multicast Service (MBMS) Bearer app (SMGR) logging facility

  • sgsn-misc: Used by stack manager to log binding and removing between layers

  • sgsn-system: SGSN System Components logging facility (used infrequently)

  • sgsn-test: SGSN Tests logging facility; used infrequently

  • sgtpcmgr: SGSN GTP-C Manager logging information exchange through SGTPC and the GGSN

  • sgw: Serving Gateway facility

  • sh-diameter: Sh Diameter messages facility

  • sitmain: System Initialization Task main logging facility

  • slmgr: Smart Licensing manager logging facility

  • sls: Service Level Specification (SLS) protocol logging facility

  • sm-app: SM Protocol logging facility

  • sms: Short Message Service (SMS) logging messages between the MS and the SMSC

  • sndcp: Sub Network Dependent Convergence Protocol (SNDCP) logging facility

  • snmp: SNMP logging facility

  • sprmgr: IPCF Subscriber Policy Register (SPR) manager logging facility

  • srdb: Static Rating Database

  • srp: Service Redundancy Protocol (SRP) logging facility

  • sscfnni: Service-Specific Coordination Function for Signaling at the Network Node Interface (SSCF-NNI) logging facility

  • sscop: Service-Specific Connection-Oriented Protocol (SSCOP) logging facility

  • ssh-ipsec: Secure Shell (SSH) IP Security logging facility

  • ssl: Secure Socket Layer (SSL) message logging facility

  • stat: Statistics logging facility

  • supserv: Supplementary Services logging facility [H.323]

  • system: System logging facility

  • tacacsplus: TACACS+ Protocol logging facility

  • tcap: TCAP Protocol logging facility

  • testctrl: Test Controller logging facility

  • testmgr: Test Manager logging facility

  • threshold: threshold logging facility

  • ttg: Tunnel Termination Gateway (TTG) logging facility

  • tucl: TCP/UDP Convergence Layer (TUCL) logging facility

  • udr: User Data Record (UDR) facility (used with the Charging Service)

  • user-data: User data logging facility

  • user-l3tunnel: User Layer 3 tunnel logging facility

  • usertcp-stack: User TCP Stack

  • vim: Voice Instant Messaging (VIM) logging facility

  • vinfo: VINFO logging facility

  • vmgctrl: Virtual Media Gateway (VMG) controller facility

  • vmgctrl: VMG Content Manager facility

  • vpn: Virtual Private Network logging facility

  • vpp: Vector Packet Processing (VPP) logging facility

  • wimax-data: WiMAX DATA

  • wimax-r6: WiMAX R6

  • wsg: Wireless Security Gateway (ASR 9000 Security Gateway)

  • x2gw-app: X2GW (X2 proxy Gateway, eNodeB) application logging facility

  • x2gw-demux: X2GW demux task logging facility

Configuring Trace Logging

Trace logging is useful for quickly resolving issues for specific sessions that are currently active. They are temporary filters that are generated based on a qualifier that is independent of the global event log filter configured using the logging filter command in the Exec mode. Like event logs, however, the information generated by the logs is stored in the active memory buffer.

All debug level events associated with the selected call are stored.


Important

Trace logs impact session processing. They should be implemented for debug purposes only.


Use the following example to configure trace logs in the Exec mode:

[local]host_name# logging trace { callid call_id | ipaddr ip_address | msid ms_id | username username } 

Once all of the necessary information has been gathered, the trace log can be deleted by entering the following command:

[local]host_name# no logging trace { callid call_id | ipaddr ip_address | msid ms_id | username username } 

Configuring Monitor Logs

Monitor logging records all activity associated with all of a particular subscriber's sessions. This functionality is available in compliance with law enforcement agency requirements for monitoring capabilities of particular subscribers.

Monitors can be performed based on a subscriber's MSID or username, and are only intended to be used for finite periods of time as dictated by the law enforcement agency. Therefore, they should be terminated immediately after the required monitoring period.

This section provides instructions for enabling and disabling monitor logs.

Enabling Monitor Logs

Use the following example to configure monitor log targets:

configure 
   logging monitor { ip_addr | ipv6_addr | msid id | username name } 
   end 

Repeat to configure additional monitor log targets.

Disabling Monitor Logs

Use the following example to disable monitor logs:

configure 
   no logging monitor { ip_addr | ipv6_addr | msid id | username name } 
   end 

Viewing Logging Configuration and Statistics

Logging configuration and statistics can be verified by entering the following command from the Exec mode:

[local]host_name# show logging [ active | verbose ] 

When no keyword is specified, the global filter configuration is displayed as well as information about any other type of logging that is enabled.

The following table provides information and descriptions of the statistics that are displayed when the verbose keyword is used.

Table 1. Logging Configuration and Statistics Commands
Field Description
General Logging Statistics
Total events received Displays the total number of events generated by the system.
Number of applications receiving events Displays the number of applications receiving the events.
Logging Source Statistics
Event sequence ids by process Displays a list of system processes that have generated events and the reference identification number of the event that was generated.
Msg backlog stat with total cnt Displays the number of event messages that have been back logged in comparison to the total number of events generated.
LS L2 filter drop rate Displays the percentage of logging source (LS) layer 2 (L2) event drops.
Abnormal Log Source Statistics Displays abnormal logging source (LS) statistics, if any.
Runtime Logging Buffer Statistics
Active buffer Displays the number of events currently logged in the active memory buffer and a timestamp for the oldest and most recent entries in the buffer.
Inactive buffer Displays the number of events currently logged in the inactive memory buffer.

Viewing Event Logs Using the CLI

Event logs generated by the system can be viewed in one of the following ways:

  • From the syslog server: If the system is configured to send logs to a syslog server, the logs can be viewed directly on the syslog server.

  • From the system CLI: Logs stored in the system memory buffers can be viewed directly from the CLI.

  • From the console port: By default, the system automatically displays events over the console interface to a terminal provided that there is no CLI session active.

This section provides instructions for viewing event logs using the CLI. These instructions assume that you are at the root prompt for the Exec mode.

Procedure


Step 1

Copy the active log memory buffer to the inactive log memory buffer.

When the active log memory buffer is copied to the inactive log memory buffer existing information in the inactive log memory buffer is deleted.

Both active and inactive event log memory buffers can be viewed using the CLI in Exec mode. However, it is preferable to view the inactive log in order to prevent any data from being over-written. The information from the active log buffer can be copied to the inactive log buffer by entering the following command:

[local]host_name# logs checkpoint 
Step 2

View the logs by entering the following command:

[local]host_name# show logs 

A number of optional keywords/variables are available for the show logs command. Refer to the Exec Mode Show Commands chapter in the Command Line Interface Reference for more information.


Configuring and Viewing Crash Logs

In the unlikely even of a software crash, the system stores information that could be useful in determining the reason for the crash. This information can be maintained in system memory or it can be transferred and stored on a network server.

The system supports the generation of the following two types of logs:

  • Crash log: Crash logs record all possible information pertaining to a software crash (full core dump). Due to their size, they can not be stored in system memory. Therefore, these logs are only generated if the system is configured with a Universal Resource Locator (URL) pointing to a local device or a network server where the log can be stored.

  • Abridged crash log: Crash event records are automatically generated when a software crash occurs and are stored in flash memory on management cards. The abridged crash log contains a list crash event records along with associated dump files. This log allows you to view event records and dump files via CLI commands.

Crash Logging Architecture

The crash log is a persistent repository of crash event information. Each event is numbered and contains text associated with a CPU (minicore), NPU or kernel crash. The logged events are recorded into fixed length records and stored in /flash/crashlog2.

Whenever a crash occurs, the following crash information is stored:
  1. The event record is stored in /flash/crashlog2 file (the crash log).
  2. The associated minicore, NPU or kernel dump file is stored in the /flash/crsh2 directory.
  3. A full core dump is stored in a user configured directory.

Important

The crashlog2 file along with associated minicore, NPU and kernel dumps are automatically synchronized across redundant management cards (SMC, MIO/UMIO). Full core dumps are not synchronized across management cards.


The following behaviors apply to the crash logging process.
  • When a crash event arrives on an active management card, the event record is stored in its crashlog2 file along with the minicore, NPU, or kernel dump file in /flash/crsh2. The crash event and dump file are also automatically stored in the same locations on the standby management card.

  • When a crash log entry is deleted via CLI command, it is deleted on both the active and standby management cards.

  • When a management card is added or replaced, active and standby cards will automatically synchronize crash logs and dump files.

  • When a crash event is received and the crash log file is full, the oldest entry in the crash log and its related dump file will be replaced with the latest arrived event and dump file on both management cards. Information for a maximum of 120 crash events can be stored on management cards.

  • Duplicate crash events bump the count of hits in the existing record and update the new record with the old crash record. Additions to the count use the timestamp for the first time the event happened.

Configuring Software Crash Log Destinations

The system can be configured to store software crash log information to any of the following locations:

  • On the ASR 5500:
    • Flash memory: Installed on the active MIO/UMIO [abridged crash log and associated dump files only]

    • USB memory stick: Installed in the USB slot on the active MIO/UMIO

  • On VPC
    • Flash memory: Accessible by the virtual machine

    • USB memory stick: Installed in the USB slot of the platform (USB slot has been enabled via the hypervisor)

  • Network Server: Any workstation or server on the network that the system can access using the Trivial File Transfer Protocol (TFTP), the File Transfer Protocol (FTP), the Secure File Transfer Protocol (SFTP), or the Hyper-Text Transfer Protocol (HTTP); this is recommended for large network deployments in which multiple systems require the same configuration


Important

In release 20.0 and higher Trusted StarOS builds, FTP is not supported.


Crash log files (full core dumps) are written with unique names as they occur to the specified location. The name format is crash-card-cpu-time-core. Where card is the card slot, cpu is the number of the CPU on the card, and time is the Portable Operating System Interface (POSIX) timestamp in hexadecimal notation.

Use the following example to configure a software crash log destination in the Global Configuration mode:

configure 
   crash enable [ encrypted ] url crash_url 
   end 
Notes:
  • Refer to the Global Configuration Mode Commands chapter in the Command Line Interface Reference for more information on this command.
  • Repeat to configure additional software crash log destinations. There is no limit to the number of destinations that can be configured.

Save the configuration as described in the Verifying and Saving Your Configuration chapter.

Viewing Abridged Crash Log Information Using the CLI

You can view abridged crash information that is stored as a set of event records in flash memory on management cards (/flash/crashlog2). Each crash event record has an associated dump file (minicore, NPU or kernel) that can also be displayed (/flash/crsh2)

Follow the instructions in this section to view software crash events that have occurred on the system. These instructions assume that you are at the root prompt for the Exec mode.

Procedure


Step 1

View a list of software crash events by entering the following Exec mode command:

[local]host_name# show crash { all | list | number crash_num } 
Notes:
  • Run show crash list to obtain the number for a specific crash event.
  • Run show crash number crash_num to display the output for the target crash event.

The resulting output may not be the same for all platforms:

Information about similar crash events is suppressed in the output of this command.

Step 2

View the dump file associated with a specific crash event.

The information contained in the dump file helps identify and diagnose any internal or external factors causing the software to crash.
  • Crash # – unique number assigned by StarOS when logging the crash event
  • SW Version – StarOS build release in format: RR.n(bbbbb)
  • Similar Crash Count – number of similar crashes
  • Time of first crash – timestamp when first crash occurred in format: YYYY-MMM-DD+hh:mm:ss
  • Failure message – text of event message
  • Function – code identifier
  • Process – where the crash occurred (Card, CPU, PID, etc.)
  • Crash time – timestamp for when the crash occurred in the format: YYYY-MMM-DD+hh:mm:ss time zone
  • Recent errno – text of most recent error number.
  • Stack – memory stack information
  • Last Bounce – information about the messaging received prior to the crash
  • Registers – memory register contents
  • Current inbound message – hexadecimal information for the current inbound message
  • Address Map
  • Recent heap activity (oldest first)
  • Recent events (oldest first)
  • Profile depth

The informational content of each crash log entry varies based on the type of crash and the StarOS release.


Reducing Excessive Event Logging

Event logging (evlogd) is a shared medium that captures event messages sent by StarOS facilities. When one or more facilities continuously and overwhelmingly keep sending a high volume of event messages, the remaining non-offender facilities are impacted. This scenario degrades system performance, especially as the number of facilities generating logs increases.

Rate-control of event message logging is handled in the Log Source path. Essentially, every second a counter is set to zero and is incremented for each log event that is sent to evlogd. If the count reaches a threshold before the second is up, the event is sent, queued or dropped (if the evlogd messenger queue is full).

When any facility exceeds the upper threshold set with this command for the rate of message logging and remains in the same state for prolonged interval, StarOS notifies the user via an SNMP trap or alarm.

A new threshold command allows a user to specify the percentage of facility event queue full. When this threshold is exceeded, an SNMP trap and alarm are generated that specifies the offending facility.

The formats for the SNMP traps associated with this command are as follows:
  • ThreshLSLogsVolume
    <timestamp> Internal trap notification <trap_id> (ThreshLSLogsVolume) threshold <upper_percent>%  
    measured value <actual_percent>% for facility <facility_name> instance <instance_id> 
  • ThreshClearLSLogsVolume
    <timestamp> Internal trap notification <trap_id> (ThreshClearLSLogsVolume) threshold <upper_percent>%  
    measured value <actual_percent>% for facility <facility_name> instance <instance_id> 

If a trigger condition occurs within the polling interval, the alert or alarm will not be generated until the end of the polling interval.

Both traps can be enabled or suppressed via the Global Configuration mode snmp trap command.

Configuring Log Source Thresholds

There are three Global Configuration mode commands associated with configuring and implementing Log Source thresholds.
  1. threshold ls-logs-volume – sets the parameters for the upper and lower thresholds for generating and clearing traps/alarms respectively.

  2. threshold poll ls-logs-volume interval – establishes the polling interval for this threshold.

  3. threshold monitoring ls-logs-volume – turns monitoring of this threshold on and off.

Use the following example to configure syslog servers:

configure 
  [ default ] threshold ls-logs-volume upper_percent [ clear lower_percent ] 
  [ default ] threshold poll ls-logs-volume interval duration 
  [ no ] threshold monitoring ls-logs-volume 
  end 
Notes:
  • upper_percent and lower_percent are expressed as integers from 0 to 100. Default value for upper_percent is 90%. If lower_percent is not specified, the default clear value is upper_percent.

  • threshold poll ls-logs-volume interval sets the polling interval in seconds. The default interval is 300 seconds (5 minutes).

  • threshold monitoring ls-logs-volume enables or disables this feature.

You can verify the configuration of this threshold by running the Exec mode show threshold command.

Save the configuration as described in the Verifying and Saving Your Configuration chapter.

Checkpointing Logs

Checkpointing identifies logged data as previously viewed or marked. Checkpointing allows you to only display log information since the last checkpoint.

Individual logs may have up to 50,000 events in the active log. Checkpointing the logs results in at most 50,000 events being in the inactive log files. This gives a maximum of 100,000 events in total which are available for each facility logged.

You check point log data via the Exec mode logs checkpoint command to set the log contents to a well-known point prior to special activities taking place. This command may also be a part of periodic regular maintenance to manage log data.

Checkpointing logs moves the current log data to the inactive logs. Only the most recently check pointed data is retained in the inactive logs. A subsequent check pointing of the logs results in the prior check pointed inactive log data being cleared and replaced with the newly check pointed data. Checkpointed log data is not available for viewing.


Important

Checkpointing logs should be done periodically to prevent the log files becoming full. Logs which have 50,000 events logged will discard the oldest events first as new events are logged.



Important

An Inspector-level administrative user cannot execute this command.


Saving Log Files

Log files can be saved to a file in a local or remote location specified by a URL. Use the following Exec mode command to save log files:

save logs { url } [ active ] ] [ inactive ] [ callid call_id ] [event-verbosity evt_verboseness ] [ facility facility ] [level severity_level ] [ pdu-data pdu_format ] [ pdu-verbosity pdu_verboseness ] [ since from_date_time [ until to_date_time ] ] [ | { grep grep_options | more } ]  

For detailed information on the save logs command, see the Exec Mode Commands chapter in the Command Line Interface Reference.

Event ID Overview


Important

The use of event IDs depends on the platform type and the licenses running on the platform.


Identification numbers (IDs) are used to reference events as they occur when logging is enabled on the system. As described previously, logs are collected on a per facility basis. Each facility possesses its own range of event IDs as indicated in the following table.
Table 2. System Facilities and Event ID Ranges
Facility Description Event ID Range
a10 A10 Protocol Facility 28000-28999
a11 A11 Protocol Facility 29000-29999
a11mgr A11 Manager Facility 9000-9999
aaa-client AAA Client Facility 6000-6999
aaamgr AAA Manager Facility 36000-36999
aaaproxy AAA Proxy Facility 64000-64999
aal2 AAL2 Protocol Facility 173200-173299
acl-log IP Access Control List (ACL) Facility 21000-21999
acsctrl Active Charging Service Controller (ACSCtrl) Facility 90000-90999
acsmgr Active Charging Service Manager (ACSMgr) Facility 91000-91999
afctrl Ares Fabric Controller (ASR 5500 only) 186000-186999
afmgr Ares Fabric Manager (ASR 5500 only) 187000-187999
alarmctrl Alarm Controller Facility 65000-65999
alcap Access Link Control Application Part (ALCAP) Protocol Facility 160900-161399
alcapmgr ALCAP Manager Facility 160500-160899
asf ASF Facility 73000-73999
asfprt ASFPRT Facility 59000-59999
asngwmgr Access Service Network (ASN) Gateway Manager Facility 100000-100499
asnpcmgr ASN Paging/Location-Registry Manager Facility 100500-100999
bcmcs Broadcast/Multicast Service (BCMCS) Facility 109000-109999
bfd Bidirectional Forwarding Detection (BFD) Protocol Facility 170500-170999
bgp Border Gateway Protocol (BGP) Facility 85000-85999
bindmux BindMux Manager Facility [Intelligent Policy Control Function (IPCF)] 158200-158999
bngmgr Broadband Network Gateway (BNG) Manager Facility 182000-182999
bssap Base Station System Application Part+ (BSSAP+) Service Facilities 131000-131199
bssgp Base Station System GPRS Protocol (BSSGP) Facility 115050-115099
callhome Call Home Facility 173600-173999
cap CAMEL Application Part (CAP) Facility 87900-88099
chatconf CHATCONF Facility 74000-74999
cli Command Line Interface (CLI) Facility 30000-30999
connproxy Connection Proxy Facility 190000-190999
crdt-ctl Credit Control Facility 127000-127999
csg Closed Subscriber Groups (CSG) Facility 188000-188999
csg-acl CSG Access Control List (ACL) Facility 189000-189999
csp Card/Slot/Port (CSP) Facility 7000-7999
css Content Steering Service (CSS) Facility [ESC] 77000-77499
css-sig Content Service Selection (CSS) RADIUS Signaling Facility 77500-77599
cx-diameter Cx Diameter Message Facility 92840-92849
dcardctrl Daughter Card Controller Facility 62000-62999
dcardmgr Daughter Card Manager Facility 57000-57999
demuxmgr Demux Manager Facility 110000-110999
dgmbmgr Diameter Gmb (DGMB) Application Manager Facility 126000-126999
dhcp DHCP Facility 53000-53999
dhcpv6 DHCPv6 Protocol Facility 123000-123999
dhost Distributed Host Manager Facility 83000-83999
diameter Diameter Endpoint Facility 92000-92599
diabase Diabase Message Facility 92800-92809
diameter-acct Diameter Accounting Protocol Facility 112000-112999
diameter-auth Diameter Authentication Protocol Facility 111000-111999
diameter-dns Diameter DNS Subsystem Facility 92600-92699
diameter-ecs ECS Diameter Signaling Facility 81990-81999
diameter-hdd Diameter Horizontal Directional Drilling (HDD) Interface Facility 92700-92799
diameter-svc Diameter Service Facility 121200-121999
diamproxy Diameter Proxy Facility 119000-119999
dpath Data Path for IPSec Facility 54000-54999
drvctrl Driver Controller Facility 39000-39999
ds3mgr DS3 and DS3/E Line Card Manager Facility (part of NPU Manager Controller Facility) 40000-40999
eap-diameter Extensible Authentication Protocol (EAP) Diameter Facility 92870-92879
eap-ipsec EAP IPSec Facility 118000-118999
ecs-css ACS Session Manager (ACSMgr) Signalling Interface Facility 97000-97099
edr Event Data Record (EDR) Facility 80000-80999
egtpc eGTP-C Facility 141000-141999
egtpmgr eGTP Manager Facility 143000-143999
egtpu eGTP-U Facility 142000-142999
epdg Evolved Packet Data Gateway (ePDG) Facility 178000-178999
evlog Event Log Facility 2000-2999
famgr Foreign Agent (FA) Manager Facility 33000-33999
firewall Firewall Facility 96000-96999
fng Femto Network Gateway (FNG) Facility 149000-149999
gbrmgr Gb-Manager Facility 201900-202699
gcdr GGSN-Charging Data Record (G-CDR) Facility 66000-66999
gmm GPRS Mobility Management (GMM) Facility 88100-88299
gprs-app General Packet Radio Service (GPRS) Application Facility 115100-115399
gprs-ns GPRS-NS Protocol Facility 115000-115049
gq-rx-tx-diameter Gq/Rx/Tx Diameter Messages Facility 92830-92839
gss-gcdr GTPP Storage Server GCDR Facility 98000-98099
gtpc GTPC Protocol Facility 47000-47999
gtpcmgr GTPC Signaling Demultiplexer Manager Facility 46000-46999
gtpp GTP-PRIME Protocol Facility 52000-52999
gtpu GTPU Protocol Facility 45000-45999
gtpumgr GTPU Manager Facility 157200-157999
gx-ty-diameter Gx/Ty Diameter Messages Facility 92820-92829
gy-diameter Gy Diameter Messages Facility 92810-92819
h248prt H.248 Protocol Facility 42000-42999
hamgr Home Agent (HA) Manager Facility 34000-34999
hat High Availability Task (HAT) Facility 3000-3999
hdctrl Hard Disk (HD) Controller Facility 132000-132999
hddshare HDD Share Facility 184000-184999
henb-gw Home eNodeB-GW Facility 195000-195999
henbapp Home eNodeB Application Facility 196000-196999
henbgwdemux Home eNodeB-GW Demux Facility 194000-194999
henbgwmgr Home eNodeB-GW Manager Facility 193000, 193999
hnb-gw Home NodeB (HNB) Gateway Facility 151000-151999
hnbmgr HNB Manager Facility 158000-158199
hss-peer-service Home Subscriber Server (HSS) Facility [MME] 138000-138999
igmp Internet Group Management Protocol (IGMP) Facility 113000-113999
ikev2 IKEv2 Facility 122000-122999
ims-authorizatn IMS Authorization Service Library Facility 98100-98999
ims-sh IMS SH Library Facility 124000-124999
imsimgr International Mobile Subscriber Identity (IMSI) Manager Facility 114000-114999
imsue IMS User Equipment (IMSUE) Facility 144000-145999
ip-arp IP Address Resolution Protocol (ARP) Facility 19000-19999
ip-interface IP Interface Facility 18000-18999
ip-route IP Route Facility 20000-20999
ipms Intelligent Packet Monitoring System (IPMS) Facility 134000-134999
ipne IP Network Enabler (IPNE) Facility 192000-192999
ipsec IPSec Protocol Facility 55000-56998
ipsg IP Services Gateway (IPSG) Facility 128000-128999
ipsgmgr IPSG Manager (IPSGMgr) Facility 99000-99999
ipsp IP Pool Sharing Protocol (IPSP) Facility 68000-68999
kvstore Key/Value Store (KVSTORE) Facility 125000-125999
l2tp-control L2TP Control PDU Protocol Facility 50000-50999
l2tp-data L2TP Data PDU Protocol Facility 49000-49999
l2tpdemux L2TP Demux Facility 63000-63999
l2tpmgr L2TP Manager Facility 48000-48999
lagmgr Link Aggregation Group (LAG) Manager Facility 179000-179999
ldap Lightweight Directory Access Protocol (LDAP) Request Facility 160000-160499
li Lawful Intercept (LI) Log Facility 69000-69999
linkmgr Link Manager Facility 89500-89999
llc Logical Link-Control (LLC) Layer Facility (GPRS) 115700-115799
local-policy Local Policy Configuration Facility 161400-162399
m3ap M3 Application Protocol (M3AP) Facility 211500-211999
m3ua MTP Level 3 (M3UA) Protocol Facility [SIGTRAN] 87500-87699
magmgr Mobile Access Gateway (MAG) Manager Facility 137500-137999
map Mobile Application Part (MAP) Protocol Facility [SS7] 87100-87299
megadiammgr MegaDiameter Manager Facility 121000-121199
mme-app Mobility Management Entity (MME) Application Facility 147000-147999
mme-embms MME evolved Multimedia Broadcast Multicast Service (eMBMS) Facility 212000-212499
mme-misc MME Miscellaneous Facility 155800-156199
mmedemux MME Demux Manager Facility 154000-154999
mmemgr MME Manager Facility 137000-137499
mmgr Master Manager (MMGR) Facility 86000-86399
mobile-ip Mobile IP (MIP) Protocol Facility 26000-26999
mobile-ip-data MIP Tunneled Data Facility 27000-27999
mobile-ipv6 Mobile IPv6 Facility 129000-129999
mpls Multiprotocol Label Switching (MPLS) Facility 163500-163999
mseg-app

Mobile Services Edge Gateway (MSEG) Application Facility

Not supported in this release.

172300-172999
mseg-gtpc

MSEG GTPC Application Facility

Not supported in this release.

172000-172199
mseg-gtpu

MSEG GTPU Application Facility

Not supported in this release.

172200-172299
msegmgr

MSEG Manager Facility

Not supported in this release.

171000-171999
mtp2 Message Transfer Part 2 (MTP2) Service Facility [SS7] 116900-116999
mtp3 Message Transfer Part 3 (MTP3) Service Facility [SS7] 115600-115699
multicast-proxy Multicast Proxy Facility 94000-94999
nas Network Access Signaling (NAS) Facility 153000-153999
netwstrg Network Storage Facility 78000-78999
npuctrl Network Processing Unit (NPU) Control Facility 16000-16999
npudrv NPU Driver Facility 191000-191999
npumgr NPU Manager (NPUMGR) Facility 17000-17999
npumgr-acl NPUMGR ACL Facility 169000-169999
npumgr-drv NPUMGR Driver Facility 185000-185999
npumgr-flow NPUMGR Flow Facility 167000-167999
npumgr-fwd NPUMGR Forwarding Facility 168000-168999
npumgr-init NPUMGR Initialization Facility 164000-164999
npumgr-lc NPUMGR LC Facility 180000-180999
npumgr-port NPUMGR Port Facility 166000-166999
npumgr-recovery NPUMGR Recovery Facility 165000-165999
npumgr-vpn NPUMGR VPN Facility 181000-181999
npusim NPUSIM Facility 176000-176999
ntfy-intf Event Notification Interface Facility 170000-170499
orbs Object Request Broker (ORB) System Facility 15000-15999
ospf Open Shortest Path First (OSPF) Protocol Facility 38000-38999
ospfv3 OSPFv3 Protocol Facility [IPv6] 150000-150999
p2p Peer-to-Peer (P2P) Facility 146000-146999
pccmgr Policy Charging and Control (PCC) Manager Facility 159000-159499
pdg Packet Data Gateway (PDG) Facility 152010-152999
pdgdmgr PDG TCP Demux Manager (pdgdmgr) Facility (this is a customer-specific facility) 162400-162999
pdif Packet Data Interworking Function (PDIF) Facility 120000-120999
pgw Packet Data Network Gateway (PGW) Facility 139000-139999
pmm-app Packet Mobility Management (PMM) Application Facility [SGSN] 89200-89499
ppp Point-To-Point Protocol (PPP) Facility 25000-25999
pppoe Point-to-Point Protocol over Ethernet (PPPoE) Facility 183000-183999
ptt PTT Facility 76000-76999
push PUSH (VPNMgr CDR Push) Facility 133000-133999
radius-acct RADIUS Accounting Protocol Facility 24000-24999
radius-auth RADIUS Authentication Protocol Facility 23000-23999
radius-coa RADIUS Change of Authorization (CoA) and Disconnect Facility 70000-70999
ranap Radio Access Network Application Part (RANAP) Facility 87700-87899
rct Recovery Control Task (RCT) Facility 13000-13999
rdt Redirector Task (RDT) Facility 67000-67999
resmgr Resource Manager (RM) Facility 14000-14999
rf-diameter Rf Diameter Messages Facility 92860-92869
rip Routing Information Protocol (RIP) Facility 35000-35999
rohc Robust Header Compression (ROHC) Protocol Facility 103000-103999
rsvp RSVP Protocol Facility 93000-93999
rua RANAP User Adaptation (RUA) Protocol Facility 152000-152009
s1ap S1 Application Protocol (S1AP) Facility 155200-155799
saegw System Architecture Evolution Gateway Facility 191000-191999
sccp Signalling Connection Control Part (SCCP) Protocol Facility [SS7] 86700-86899
sct Shared Configuration Task (SCT) Facility 32000-32099
sctp Stream Control Transmission Protocol (SCTP) Protocol Facility 87300-87499
sess-gr SESS-GR Facility 77600-77999
sessctrl Session Controller Facility 8000-8999
sessmgr Session Manager Facility 10000-12999
sesstrc Session Trace Facility 155000-155199
sft Switch Fabric Task (SFT) Facility 58000-58999
sgs SGs Interface Protocol Facility [MME] 173000-173199
sgsn-app SGSN Application Interface Facility 115900-115999
sgsn-failures SGSN Call Failures Facility 89100-89199
sgsn-gtpc SGSN GTP-C Protocol Facility 116000-116599
sgsn-gtpu SGSN GTP-U Protocol Facility 86900-87099
sgsn-mbms-bearer SGSN MBMS Bearer Application (SMGR) Facility 116600-116799
sgsn-misc SGSN Miscellaneous Facility 88800-89099
sgsn-system SGSN System Components Facility 86400-86499
sgsn-test SGSN Tests Facility 88700-88799
sgsn2 SGSN2 Facility 114000-117999
sgtpcmgr SGSN GTP-C (SGTPC) Manager Facility 117000-117999
sgw Serving Gateway (SGW) Facility 140000-140999
sh-diameter Sh Diameter Messages Facility 92850-92859
sipcdprt SIPCDPRT Facility 95000-95999
sitmain System Initiation Task (SIT) Main Facility 4000-4999
sm-app Short Message Service (SMS) Facility 88300-88499
sms SMS Service Facility 116800-116899
sndcp Sub Network Dependent Convergence Protocol (SNDCP) Facility 115800-115899
snmp Simple Network Management Protocol (SNMP) Facility 22000-22999
sprmgr Subscriber Policy Register (SPR) Manager Facility 159500-159999
srdb Static Rating Database Facility 102000-102999
srp Service Redundancy Protocol (SRP) Facility 84000-84999
sscfnni SSCFNNI Protocol Facility [ATM] 115500-115599
sscop SSCOP Protocol Facility [ATM] 115400-115499
ssh-ipsec SSH IP Security Facility 56999-56999
ssl SSL Facility (this is a customer-specific facility) 156200-157199
stat Statistics Facility 31000-31999
system System Facility 1000-1999
tacacs+ TACACS+ Protocol Facility 37000-37999
taclcp TACLCP Facility 44000-44999
tcap Transaction Capabilities Application Part (TCAP) Protocol Logging Facility [SS7] 86500-86699
testctrl Test Controller Facility 174000-174999
testmgr Test Manager Facility 175000-175999
threshold Threshold Facility 61000-61999
ttg Tunnel Termination Gateway (TTG) Facility 130000-130999
tucl TCP/UDP Convergence Layer (TUCL) Facility [SS7] 88500-88699
udr User Data Record (UDR) Facility 79000-79999
user-data User-Data Facility 51000-51999
user-l3tunnel User L3 Tunnel Facility 75000-75999
usertcp-stack User TCP Stack Facility 173300-173499
vim Voice Instant Message (VIM) Facility 60000, 60999
vinfo VINFO Facility 82000, 82999
vmgctrl Virtual Media Gateway (VMG) Controller Facility 41000, 41999
vmgctxmgr VMG Context Manager Facility 43000, 43999
vpn Virtual Private Network (VPN) Facility 5000-5999
wimax-data WiMAX DATA Facility 104900-104999
wimax-r6 WiMAX R6 Protocol (Signaling) Facility 104000-104899

Event Severities

The system provides the flexibility to configure the level of information that is displayed when logging is enabled. The following levels are supported:

  • critical: Logs only those events indicating a serious error has occurred that is causing the system tor a system component to cease functioning. This is the highest severity level.

  • error: Logs events that indicate an error has occurred that is causing the system or a system component to operate in a degraded state. This level also logs events with a higher severity level.

  • warning: Logs events that may indicate a potential problem. This level also logs events with a higher severity level.

  • unusual: Logs events that are very unusual and may need to be investigated. This level also logs events with a higher severity level.

  • info: Logs informational events and events with a higher severity level.

  • trace: Logs events useful for tracing and events with a higher severity level.

  • debug: Logs all events regardless of the severity.

Each of the above levels correspond to the "severity" level of the event ID. Therefore, only those event IDs with a "severity" level equal to the logging level are displayed.

Understanding Event ID Information in Logged Output

This section explains the event information that is displayed when logging is enabled.

The following displays a sample output for an event that was logged.

2011-Dec-11+5:18:41.993 [cli 30005 info] [8/0/609 cli:8000609 _commands_cli.c:1290] [software internal system] CLI session ended for Security Administrator admin on device /dev/pts/2 
The following table describes the elements of contained in the sample output.
Table 3. Event Element Descriptions
Element Description
2011-Dec-11+5:18:41.993 Date/Timestamp indicating when the event was generated
[cli 30005 info]
Information about the event including:
  • The facility the event belongs to
  • The event ID
  • The event's severity level

In this example, the event belongs to the CLI facility, has an ID of 3005, and a severity level of "info".

[8/0/609 cli:8000609 _commands_cli.c:1290] Information about the specific CLI instance.
[software internal system] Indicates that the event was generated because of system operation.
CLI session ended for Security Administrator admin on device /dev/pts/2 The event's details. Event details may, or may not include variables that are specific to the occurrence of the event.