Gateway Selection Profile Configuration Mode Commands

Mode

Exec > Global Configuration > Gateway Selection Profile Configuration

configure > gateway-selection-profile profile_name

Entering the above command sequence results in the following prompt:

[local]host_name(gw-profile-profile_name)# 

Important

Available commands or keywords/variables vary based on platform type, product version, and installed license(s).


description

Product

ePDG

Privilege

Security Administrator, Administrator

Mode

Exec > Global Configuration > Gateway Selection Profile Configuration

configure > gateway-selection-profile profile_name

Entering the above command sequence results in the following prompt:

[local]host_name(gw-profile-profile_name)# 

Syntax

description descriptive_string 

remove description  

remove

descriptive_string

descriptive_string must be an alphanumeric string from 1 to 100 characters.

Usage Guidelines

Use this command to

Example

Use the following command to

 

do show

Executes all show commands while in Configuration mode.

Product

All

Privilege

Security Administrator, Administrator

Syntax

do show 

Usage Guidelines

Use this command to run all Exec mode show commands while in Configuration mode. It is not necessary to exit the Config mode to run a show command.

The pipe character | is only available if the command is valid in the Exec mode.


Caution

There are some Exec mode show commands which are too resource intensive to run from Config mode. These include: do show support collection , do show support details , do show support record and do show support summary . If there is a restriction on a specific show command, the following error message is displayed:

Failure: Cannot execute 'do	show support' command from Config mode.

end

Exits the current configuration mode and returns to the Exec mode.

Product

All

Privilege

Security Administrator, Administrator

Syntax

end 

Usage Guidelines

Use this command to return to the Exec mode.

exit

Exits the current mode and returns to the parent configuration mode.

Product

All

Privilege

Security Administrator, Administrator

Syntax

exit 

Usage Guidelines

Use this command to return to the parent configuration mode.

zone

Product

ePDG

Privilege

Security Administrator, Administrator

Mode

Exec > Global Configuration > Gateway Selection Profile Configuration

configure > gateway-selection-profile profile_name

Entering the above command sequence results in the following prompt:

[local]host_name(gw-profile-profile_name)# 

Syntax

zone zone_fqdn action { ignore | mandatory } 

remove zone zone_fqdn 

remove

zone_fqdn

zone_fqdn must be an alphanumeric string from 1 to 255 characters.

action { ignore | mandatory }

Usage Guidelines

Use this command to

Example

Use the following command to