associate
Associates or disassociates a user-plane service with GTPU. By default, this CLI command is disabled.
Product
CUPS
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > User Plane Service Configuration
configure > context context_name > user-plane-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-user-plane-service)#
Syntax
[no] associate gtpu-service service_name { pgw-ingress | sgw-ingress | sgw-egress | sx-service | cp-tunnel }
no
Removes association of GTPU-Service from the User-Plane-Service. For example, the CLI command no associate gtpu-service pge-ingress removes the association of GTPU-Service with interface type pgw-ingress, with User-Plane-Service.
gtpu-service
Associates GTPU-Service with User-Plane-Service.
service_name specifies the name for a pre-configured GTPU service to be associated with the User-Plane service.
pgw-ingress
Configures the interface type as PGW ingress.
sgw-ingress
Configures the interface type as SGW ingress.
sgw-egress
Configures the interface type as SGW egress.
sx-service
Configures the interface type as Sx service.
cp-tunnel
Configures the interface type as cp-tunnel (tunnel towards Control Plane function).
Usage Guidelines
Use this command to associate a pre-configured GTPU service the user-plane service.
Example
associate gtpu-service gtp1 pgw-ingress