AAA Interface Administration and Reference, StarOS Release 21.26

3GPP2-835-Release-Indicator

3GPP2 835 Standard Release Indicator, reason/cause for session release.

Syntax Enumerated Integer. Supports the following value(s):

Unknown = 0
PPP-Timeout = 1
Handoff = 2
PPP-Termination = 3
Mobile-IP-Registration-Failure = 4
Active-To-Dormant = 5

Length 4

Type 26

Vendor ID 5535

VSA Type 24

3GPP2-Acct-Session-Time

The total amount of time spent in the Active state, in seconds. This attribute has the same type as Acct-Session-Time, and thus conforms to IS-835.

Syntax Unsigned Integer

Length 4

Type 46

Vendor ID N/A

VSA Type N/A

3GPP2-Active-Time-Corrected

3GPP2 Active session time value.

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 5535

VSA Type 49

3GPP2-Active-Time

The total period of time spent in the Active state, in seconds.

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 5535

VSA Type 49

3GPP2-Airlink-Record-Type

This attribute indicates the most recent type of Airlink Record to be received for this subscriber's connection.

Syntax Enumerated Integer. Supports the following value(s):

Connection-Setup = 1
Active-Start = 2
Active-Stop = 3
SDB = 4 BCMCS-Connection-Setup = 5
BCMCS-Active-Start = 6
BCMCS-Active-Stop = 7

Length 4

Type 26

Vendor ID 5535

VSA Type 40

3GPP2-Airlink-Sequence-Number

This represents the sequence number of an Airlink Record and is incremented (modulo 256) by the PCF for each Airlink Record. The sequence number is unique for a given RP Session ID, PCF ID, and MSID.

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 5535

VSA Type 42

3GPP2-Air-QOS

This attribute identifies airlink QOS associated with the user data. The least significant 4 bits hold the QOS priority as defined in C.S0001-A in the subscriber profile.

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 5535

VSA Type 39

3GPP2-Allowed-Diffserv

This attribute specifies if the user is able to mark packets with AF and/or EF. The Max Class specifies that the user may mark packets with a Class Selector Code Point that is less then or equal to Max Class.

Type 26

Vendor ID 5535

VSA Type 73

Syntax Compound. Contains the following sub-attribute(s).

Flags

Allowed DSCP flag.

Syntax Enumerated Integer. Supports the following value(s):

Allow_AF_EF_Exp = 0xE000
Allow_AF_EF = 0xC000
Allow_AF_Exp = 0xA000
Allow_EF_Exp = 0x6000
Allow_AF = 0x8000
Allow_EF = 0x4000
Allow_Exp = 0x2000
Allow_None = 0x0

Length 2

Type 1

Max-Class

Allowed max dscp.

Syntax Enumerated Integer. Supports the following value(s):

Best-Effort = 0x0
AF11 = 0x2800
AF12 = 0x3000
AF13 = 0x3800
AF21 = 0x4800
AF22 = 0x5000
AF23 = 0x5800
AF31 = 0x6800
AF32 = 0x7000
AF33 = 0x7800
AF41 = 0x8800
AF42 = 0x9000
AF43 = 0x9800
EF = 0xb800
Class1 = 0x2000
Class2 = 0x4000
Class3 = 0x6000
Class4 = 0x8000
Class5 = 0xa000
Class6 = 0xc000
Class7 = 0xe000

Length 2

Type 2

RT-Marking

Allowed max dscp rev. tun.

Syntax Enumerated Integer. Supports the following value(s):

Best-Effort = 0x0
AF11 = 0x2800
AF12 = 0x3000
AF13 = 0x3800
AF21 = 0x4800
AF22 = 0x5000
AF23 = 0x5800
AF31 = 0x6800
AF32 = 0x7000
AF33 = 0x7800
AF41 = 0x8800
AF42 = 0x9000
AF43 = 0x9800
EF = 0xb800
Class1 = 0x2000
Class2 = 0x4000
Class3 = 0x6000
Class4 = 0x8000
Class5 = 0xa000
Class6 = 0xc000
Class7 = 0xe000

Length 2

Type 3

3GPP2-Allowed-Persistent-TFTs

3GPP2 Allowed Persistent Traffic Flow Templates.

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 5535

VSA Type 89

3GPP2-Alternate-Billing-ID

This attribute is currently not supported.

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 5535

VSA Type 35

3GPP2-Always-On

This attribute, when set to Active, indicates that the subscriber's session should be kept up regardless of the idle time as long as the subscriber is reachable. Reachability is ascertained using LCP keepalive messages.

Syntax Enumerated Integer. Supports the following value(s):

Inactive = 0
Active = 1

Length 4

Type 26

Vendor ID 5535

VSA Type 78

3GPP2-Auth-Flow-Profile-Id

This compound attribute is a list of flow profile IDs.

Type 26

Vendor ID 5535

VSA Type 131

Syntax Compound. Contains the following sub-attribute(s).

Profile-Id-Forward

This attribute specifies a list of Forward Flow Profile IDs that the user is allowed to specify/request in a QoS Sub Blob.

Syntax Unsigned Integer

Length 2

Type 1

Profile-Id-Reverse

This attribute specifies a list of Reverse Flow Profile IDs that the user is allowed to specify/request in a QoS Sub Blob.

Syntax Unsigned Integer

Length 2

Type 2

Profile-Id-Bi-Direction

This attribute specifies the list of Bi-Direction Flow Profile IDs that the user is allowed to specify/request in a QoS Sub Blob.

Syntax Unsigned Integer

Length 2

Type 3

3GPP2-Bad-PPP-Frame-Count

The total number of PPP frames from the MS dropped by the PDSN due to uncorrectable errors.

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 5535

VSA Type 25

3GPP2-BCMCS-Auth-Parameters

This is a grouped attribute with Authentication signature, Sequence number, and timestamp required to validate each flow in a BCMCS flow registration request. Each flow is validated using the procedure described in 3GPP2 standard C.S0054-0_v1.0. This information is configured on a per subscriber basis.

Type 26

Vendor ID 5535

VSA Type 99

Syntax Compound. Contains the following sub-attribute(s).

BAK-Sequence-Number

Syntax Opaque Value

Length 1

Type 1

Timestamp

Syntax Opaque Value

Length 33

Type 2

Auth-Signature

Syntax Unsigned Integer

Length 4

Type 3

3GPP2-BCMCS-BSN-Session-Info

This is a grouped attribute containing information about the established flows. This includes the multicast address, port, compression status of the flow, and the content server address.

Type 26

Vendor ID 5535

VSA Type 103

Syntax Compound. Contains the following sub-attribute(s).

Flow-Id

This attribute specifies the Granted QoS parameters received from the RAN for the flow identified by FLOW_ID.

Syntax Unsigned Integer

Length 2

Type 2

Mcast-IP-Addr

Syntax IPv4 Address

Length 4

Type 2

Mcast-Port

Syntax Unsigned Integer

Length 2

Type 3

Header-Compression-Algorithm

Syntax Enumerated Integer. Supports the following value(s):

No_header_compression = 0
ROHC_U_Mode = 1

Type 26

Vendor ID 5535

VSA Type 101

Syntax Compound. Contains the following sub-attribute(s).

BCMCS-Protocol-Revision

Syntax Enumerated Integer. Supports the following value(s):

Release_0 = 1

Length 2

Type 1

3GPP2-BCMCS-Common-Session-Info

This compound attribute specifies the program start time, end time, and the allowed registration time on a per flow basis.

Type 26

Vendor ID 5535

VSA Type 102

Syntax Compound. Contains the following sub-attribute(s).

Flow-ID

Syntax Opaque Value

Length 2-4

Type 1

Program-Start-Time

Syntax Unsigned Integer

Length 4

Type 2

Program-End-Time

Syntax Unsigned Integer

Length 4

Type 3

Program-Allowed-Registration-Time

Syntax Unsigned Integer

Length 4

Type 4

Auth-Required-Flag

Syntax Enumerated Integer. Supports the following value(s):

Authorization_not_required = 0
Authorization_required = 1

Syntax Compound. Contains the following sub-attribute(s).

Flow-ID

Syntax Opaque Value

Length 2-4

Type 1

BCMCS-Encryption-Mechanism-Attribute

Syntax Enumerated Integer. Supports the following value(s):

High_layer_encryption_in_CS = 0
Link_layer_encryption_in_RN = 1

Length 2

Type 2

BCMCS-BAK-ID-Attribute

Syntax Unsigned Integer

Length 1

Type 3

BCMCS-BAK

Syntax Opaque Value

Length 16

Type 4

BCMCS-BAK-Expire-Time

Syntax Unsigned Integer

Length 4

Type 5

BCMCS-Session-Bandwidth-attribute

Syntax Unsigned Integer

Length 2

Type 6

3GPP2-Beginning-Session

3GPP2 Beginning Session will be TRUE or FALSE depending on if this is a new session.

Syntax Enumerated Integer. Supports the following value(s):

False = 0
True = 1

Length 4

Type 26

Vendor ID 5535

VSA Type 51

3GPP2-BSID

The base station ID.

Syntax Opaque Value

Length 6-12

Type 26

Vendor ID 5535

VSA Type 10

3GPP2-Carrier-ID

A 5 or 6-byte identifier of the visited PDSN comprising of a 3 byte Mobile Country Code (MCC) followed by a 2 or 3 byte Mobile Network Code (MNC) of the visited carrier. This value is configured locally in the visited carrier's PDSN.

Syntax Opaque Value

Length 5-6

Type 26

Vendor ID 5535

VSA Type 142

3GPP2-Comp-Tunnel-Indicator

This attribute indicates the invocation of a compulsory tunnel established on behalf of the MS for providing private network and/or ISP access during a single packet data connection. Normal PPP sessions will show No Tunnel. L2TP, IPinIP, and IP-GRE tunnels will show Non-Secure-Tunnel. IPSEC support will show Secure-Tunnel.

Syntax Enumerated Integer. Supports the following value(s):

No-Tunnel = 0
Non-Secure-Tunnel = 1
Secure-Tunnel = 2

Length 4

Type 26

Vendor ID 5535

VSA Type 23

3GPP2-Container

A compound attribute that encapsulates the User Data Record for an Airlink Event.

Type 26

Vendor ID 8164

VSA Type 240

Syntax Compound. Contains the following sub-attribute(s). enum16 reason { Tarrif-Boundary = 1, Parameter-Change = 2, Handoff = 3, Active-To-Dormant = 4 } uint32 timestamp attribute ThreeGPP2-BSID attribute ThreeGPP2-MEID attribute ThreeGPP2-FEID reason Parameter-Change { attribute ThreeGPP2-User-Zone attribute ThreeGPP2-Forward-Mux-Option attribute ThreeGPP2-Reverse-Mux-Option attribute ThreeGPP2-Service-Option attribute ThreeGPP2-Fwd-Pdch-Rc attribute ThreeGPP2-Fwd-Dcch-Mux-Option attribute ThreeGPP2-Rev-Dcch-Mux-Option attribute ThreeGPP2-Air-QOS } reason Handoff { attribute NAS-IP-Address attribute ThreeGPP2-Serving-PCF } attribute Acct-Output-Octets attribute Acct-Input-Octets attribute ThreeGPP2-Bad-PPP-Frame-Count attribute ThreeGPP2-Active-Time attribute ThreeGPP2-Number-Active-Transitions attribute ThreeGPP2-SDB-Input-Octets attribute ThreeGPP2-SDB-Output-Octets attribute ThreeGPP2-Num-SDB-Input attribute ThreeGPP2-Num-SDB-Output attribute ThreeGPP2-Num-Bytes-Received-Total attribute ThreeGPP2-MIP-Signaling-Octet-Count-Input attribute ThreeGPP2-MIP-Signaling-Octet-Count-Output attribute ThreeGPP2-Last-Activity attribute Starent-Acct-PPP-Unfr-data-In-Oct attribute Starent-Acct-PPP-Unfr-data-Out-Oct }

Type 26

Vendor ID 5535

VSA Type 6

Specifies the DCCH frame size.

Syntax Enumerated Integer. Supports the following value(s):

None = 0
5ms = 1
20ms = 2

Length 4

Type 26

Vendor ID 5535

VSA Type 50

3GPP2-Diff-Service-Class-Option

This is the DSCP (Differentiated Service Code Point) value as defined in the 3GPP2 standard. The DSCP values are assigned for different classes of traffic so that each traffic class can be given different priorities (QoS).

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 5535

VSA Type 5

3GPP2-Disconnect-Reason

This attribute indicates the reason for disconnecting the user. This attribute may be present in the RADIUS Disconnect-request Message from Home RADIUS server to the PDSN.

Syntax Enumerated Integer. Supports the following value(s):

MS_Mobility_Detection = 1;

Length 4

Type 26

Vendor ID 5535

VSA Type 96

3GPP2-DNS-Server-IP-Address

DNS server IP address. Used in custom dictionary.

Type 26

Vendor ID 5535

VSA Type 117

Syntax Compound. Contains the following sub-attribute(s).

Primary-DNS-Server-IP

IP address of the primary DNS server.

Syntax IPv4 Address

Length 4

Type 1

Secondary-DNS-Server-IP

IP address of the secondary DNS server.

Syntax IPv4 Address

Length 4

Type 2

Flag

M bit set to 1 indicates to the PDSN that primary and secondary IP addresses provided by the Home RADIUS server should override the primary and secondary IP addresses provided also by the visited RADIUS server.

Syntax Unsigned Integer

Length 1

Type 3

Entity-Type

Network Entity inserted in the DNS server ID address. Currently the following types are defined. HAAA = 1, VAAA = 1.

Syntax Unsigned Integer

Length 1

Type 4

3GPP2-DNS-Server-IPV6-Addr

DNS server IPv6 address.

Type 26

Vendor ID 5535

VSA Type 214

Syntax Compound. Contains the following sub-attribute(s).

Primary-DNS-Server-IPV6

Primary DNS server IPv6 address.

Syntax Opaque Value

Length 16

Type 1

Secondary-DNS-Server-IPV6

Secondary IPv6 DNS server IP address.

Syntax Opaque Value

Length 16

Type 2

Flag-IPV6

M bit set to 1 indicates to the PDSN that Primary and Secondary IPv6 addresses provided by the Home RADIUS server should override the Primary and Secondary IPv6 addresses provided also by the visited RADIUS server.

Syntax Unsigned Integer

Length 1

Type 3

Entity-Type-IPV6

Network Entity that inserted in the DNS server ID address. Either HAAA = 1, VAAA = 1.

Syntax Unsigned Integer

Length 1

Type 4

3GPP2-DNS-Update-Required

This attribute indicates whether the HA needs to send the DNS update to the DNS server.

Syntax Enumerated Integer. Supports the following value(s):

No = 0
Yes = 1

Length 4

Type 26

Vendor ID 5535

VSA Type 75

3GPP2-ESN

This attribute contains the Electronic Serial Number (ESN) of the Mobile Station.

Syntax Opaque Value

Length 1-15

Type 26

Vendor ID 5535

VSA Type 52

3GPP2-FA-Address

This attribute indicates if compulsory tunneling is to be employed on behalf of a subscriber. Usually compulsory tunneling is employed when a subscriber cannot initiate a tunnel itself, usually because the subscriber's device does not support tunneling. Contains an IP address as it would appear in the IP header.

Syntax IPv4 Address

Length 4

Type 26

Vendor ID 5535

VSA Type 79

3GPP2-FEID

This attribute specifies the FEID value.

Syntax Opaque Value

Length 0-16

Type 26

Vendor ID 5535

VSA Type 216

3GPP2-Flow-Id

This attribute specifies the 3GPP2-Flow-Id-parameter.

Type 26

Vendor ID 5535

VSA Type 144

Syntax Compound. Contains the following sub-attribute(s).

Direction

Direction of the PDF.

Syntax Enumerated Integer. Supports the following value(s):

Forward = 0
Reverse = 1
Both = 2

Length 2

Type 1

Flow-Id

This attribute specifies the Granted QoS parameters received from the RAN for the flow identified by FLOW_ID.

Syntax Unsigned Integer

Length 2

Type 2

3GPP2-Flow-Status

This attribute specifies the 3GPP2 Flow Status.

Syntax Enumerated Integer. Supports the following value(s):

Active = 0
Inactive = 1

Length 4

Type 26

Vendor ID 5535

VSA Type 145

3GPP2-Forward-Fundamental-Rate

As defined in "Wireless IP Network Standard - 3GPP2.P.S0001-A-1".

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 5535

VSA Type 14

3GPP2-Forward-Fundamental-RC

The format and structure of the RADIUS channel in the forward direction. A set of forward transmission formats that are characterized by data rates, modulation characterized, and spreading rates.

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 5535

VSA Type 20

3GPP2-Forward-Mux-Option

Forward direction multiplexer option.

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 5535

VSA Type 12

3GPP2-Forward-Traffic-Type

Specifies the forward traffic type.

Syntax Enumerated Integer. Supports the following value(s):

Primary = 0
Secondary = 1

Length 4

Type 26

Vendor ID 5535

VSA Type 17

3GPP2-Fundamental-Frame-Size

This attribute indicates the fundamental frame size. The fundamental channel has the choice of 5 or 20 ms size. The 5 ms frame size allows fast response for short signaling messages (short frame can be decoded quickly). However, depending on configuration, the fundamental may not be present.

Syntax Enumerated Integer. Supports the following value(s):

None = 0
5ms = 1
20ms = 2

Length 4

Type 26

Vendor ID 5535

VSA Type 19

3GPP2-Fwd-Dcch-Mux-Option

This attribute specifies Forward DCCH Mux option.

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 5535

VSA Type 84

3GPP2-Fwd-Dcch-Rc

This attribute specifies Radio Configuration of the Forward Packet Data Channel.

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 5535

VSA Type 86

3GPP2-Fwd-Pdch-Rc

This attribute specifies Radio Configuration of the Forward Packet Data Channel.

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 5535

VSA Type 83

3GPP2-GMT-Timezone-Offset

GMT-Time-Zone-Offset is 4-octet string that is interpreted as a 4-byte signed integer that indicates the current offset in seconds from GMT at the visited carrier's PDSN. The offset should be adjusted to reflect standard time or daylight saving time.

Syntax Integer

Length 4

Type 26

Vendor ID 5535

VSA Type 143

3GPP2-Granted-QoS

This attribute specifies the 3GPP2-Granted-QoS-Parameter.

Type 26

Vendor ID 5535

VSA Type 132

Syntax Compound. Contains the following sub-attribute(s).

Direction

Direction of the PDF.

Syntax Enumerated Integer. Supports the following value(s):

Forward = 0
Reverse = 1
Both = 2

Length 2

Type 1

Flow-Id

This attribute specifies the Granted QoS parameters received from the RAN for the flow identified by FLOW_ID.

Syntax Unsigned Integer

Length 2

Type 2

Attribute-Set-Id

This attribute specifies the Granted QoS parameters received from the RAN for flow verbose or non-verbose.

Syntax Unsigned Integer

Length 2

Type 3

Flow-Profile-Id

This attribute specifies the Granted QoS parameters received from the RAN for the flow profile ID.

Syntax Unsigned Integer

Length 2

Type 4

Traffic-Class

This attribute specifies the Granted QoS parameters received from the RAN for the flow traffic class.

Syntax Enumerated Integer. Supports the following value(s):

Unknown = 0
Conversational = 1
Streaming = 2
Interactive = 3
Background = 4

Length 2

Type 11

Delay-Var-Sensitive

This attribute specifies the Granted QoS parameters received from the RAN for the flow Delay Var Sensitive.

Syntax Enumerated Integer. Supports the following value(s):

Not-Specified = 0
Sensitive = 1

Length 2

Type 12

3GPP2-IKE-Secret-Request

This attribute indicates if the IKE secret for the FA/HA pair is to be returned for the subscriber.

Syntax Enumerated Integer. Supports the following value(s):

No = 0
Yes = 1

Length 4

Type 26

Vendor ID 5535

VSA Type 139

3GPP2-IP-QOS

This attribute defines the differentiated Services code points associated with the user data.

Syntax Enumerated Integer. Supports the following value(s):

Best-Effort = 0
CS1 = 8
AF11 = 10
AF12 = 12
AF13 = 14
CS2 = 16
AF21 = 18
AF22 = 20
AF23 = 22
CS3 = 24
AF31 = 26
AF32 = 28
AF33 = 30
CS4 = 32
AF41 = 34
AF42 = 36
AF43 = 38
CS5 = 40
EF = 46
CS6 = 48
CS7 = 56

Length 4

Type 26

Vendor ID 5535

VSA Type 36

3GPP2-IP-Services-Authorized

This attribute specifies the type of IP services (IPv4/CMIPv4/IPv6/CMIPv6/PMIPv4/PMIPv6..etc) authorized.

Syntax Enumerated Integer. Supports the following value(s):

SIP4 = 1
SIP6 = 2
MIP4 = 4
MIP6 = 8
IP4_PMIP4 = 16
IP6_PMIP4 = 32
IP4_PMIP6 = 64
IP6_PMIP6 = 128

Length 4

Type 26

Vendor ID 5535

VSA Type 185

3GPP2-IP-Technology

This attribute identifies whether we are using Simple IP, Mobile IP, or another technology.

Syntax Enumerated Integer. Supports the following value(s):

Simple-IP = 1
Mobile-IP = 2

Length 16

Type 26

Vendor ID 5535

VSA Type 118

3GPP2-MIP6-HoA-Not-Authorized

Value of 1 indicates to the HA that the HoA is not authorized to be used by HA.

Syntax Enumerated Integer. Supports the following value(s):

UnAuthorized = 1

Length 4

Type 26

Vendor ID 5535

VSA Type 7

3GPP2-MIP-Lifetime

This VSA should be included in the RADIUS Access-Request message from the HA to the Home RADIUS/PPS if the HA is PrePaid capable. It may be included in the RADIUS Access-Accept message from the Home RADIUS/PPS to HA, in which case, the HA should include the received value in the MIP RRP sent to the PDSN.

Type 26

Vendor ID 5535

VSA Type 92

Syntax Compound. Contains the following sub-attribute(s).

RRQ-Lifetime

Should be included in the initial RADIUS Access-Request message and subsequent on-line RADIUS Access-Request if duration based PrePaid is provided for the session. It contains the MIP RRQ integer value lifetime received in the MIP RRQ message. In the RADIUS Access-Accept message, it contains the MIP RRQ integer value lifetime that should be used in the MIP RRP.

Syntax Unsigned Integer

Length 4

Type 1

Used-Lifetime

Should be included in the RADIUS Access-Request message at re-registration and updated RRQ (new CoA) if duration based PrePaid is provided for the session, it contains the used MIP RRQ lifetime value from an existing MIP session with the same NAI and Home Address.

Syntax Unsigned Integer

Length 4

Type 2

3GPP2-MIP-Rev-Tunnel-Required

Indicates to the PDSN if MIP Reverse Tunneling is required.

Syntax Enumerated Integer. Supports the following value(s):

NotRequired = 0
Required = 1

Length 4

Type 26

Vendor ID 5535

VSA Type 4

3GPP2-MIP-Sig-Octet-Count-In

The total number of octets in registration requests and solicitations sent by the mobile.

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 5535

VSA Type 46

3GPP2-MIP-Sig-Octet-Count-Out

The total number of octets in registration replies and agent advertisements, sent to the mobile.

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 5535

VSA Type 47

3GPP2-MN-AAA-Removal-Indication

This attribute, when set to "Not Required", indicates that the system, when acting as a Mobile-IP Foreign Agent, should remove the MN-FA challenge and the MN-AAA Authentication Extensions, when present, from the RRQ before relaying the RRQ to the Mobile-IP Home Agent.

Syntax Enumerated Integer. Supports the following value(s):

Allowed = 0
Not-Required = 1

Length 4

Type 26

Vendor ID 5535

VSA Type 81

3GPP2-MN-HA-Shared-Key-No-Enc

This attribute contains the MN-HA shared key in plain format.

Syntax Opaque Value

Length 1-251

Type 26

Vendor ID 5535

VSA Type 58

3GPP2-MN-HA-Shared-Key

A shared key for MN-HA authentication. The MN-HA shared key is encrypted using a method based on MD5.

Syntax Opaque Value

Length 1-251

Type 26

Vendor ID 5535

VSA Type 58

3GPP2-MN-HA-SPI

The SPI for the MN-HA authentication shared key.

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 5535

VSA Type 57

3GPP2-Mobile-Term-Orig-Ind

Tells whether the call is mobile originated (Call initiated from mobile side) or mobile terminated (Call initiated from external towards mobile).

Syntax Enumerated Integer. Supports the following value(s):

Mobile-Originated = 0
Mobile-Terminated = 1

Length 4

Type 26

Vendor ID 5535

VSA Type 45

3GPP2-Number-Active-Transitions

This attribute counts the total number of non-active to active transitions by the user.

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 5535

VSA Type 30

3GPP2-Num-Bytes-Received-Total

This attribute counts all bytes received in the reverse direction by the HDLC layer in the PDSN.

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 5535

VSA Type 43

3GPP2-Num-SDB-Input

This attribute counts the total number of Short Data Burst transactions to the user.

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 5535

VSA Type 33

3GPP2-Num-SDB-Output

This attribute counts the total number of Short Data Burst transactions from the user.

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 5535

VSA Type 34

3GPP2-PMIP-Capability

This attribute specifies the AGW's PMIP capability.

Syntax Enumerated Integer. Supports the following value(s):

PMIPv4_ONLY = 1
PMIPv6_ONLY = 2
PMIPv4_PMIPv6 = 3

Length 4

Type 26

Vendor ID 5535

VSA Type 193

3GPP2-PMIP-IPv4Session-Info

This attribute specifies PMIP information for IPv4 session.

Type 26

Vendor ID 5535

VSA Type 194

Syntax Compound. Contains the following sub-attribute(s).

Length 0-160

VAAA-IPv4Session-HA-Addr

An IPv4 address or IPv6 Address of the local HA assigned by the AGW/VAAA for AT's IPv4 Address assignment.

Syntax Opaque Value

Length 0-16

Type 1

HAAA-IPv4Session-HA-Addr

An IPv4 address or IPv6 Address of the home or local HA assigned by the HAAA for AT's IPv4 Address assignment.

Syntax Opaque Value

Length 0-16

Type 2

PMN-HA-KEY

Syntax Opaque Value

Length 0-32

Type 3

PMN-HA-SPI

Syntax Unsigned Integer

Length 4

Type 4

VAAA-IPv4Session-LMA-Addr

An IPv4 address or IPv6 Address of the local LMA assigned by the AGW/VAAA for AT's IPv4 Address assignment

Syntax Opaque Value

Length 0-16

Type 5

HAAA-IPv4Session-LMA-Addr

An IPv4 address or IPv6 Address of the home or local LMA assigned by the HAAA for AT's IPv4 Address assignment.

Syntax Opaque Value

Length 0-16

Type 6

PMN-LMA-KEY

Syntax Opaque Value

Length 0-32

Type 7

PMN-LMA-SPI

Syntax Unsigned Integer

Length 4

Type 8

3GPP2-PMIP-IPv6Session-Info

This attribute specifies the PMIP information for IPv6 session.

Type 26

Vendor ID 5535

HAAA-IPv6Session-LMA-Addr

An IPv4 address or IPv6 Address of the home or local LMA assigned by the HAAA for AT's IPv6 Address assignment.

Syntax Opaque Value

Length 0-16

Type 6

PMN-LMA-KEY

Syntax Opaque Value

Length 0-32

Type 7

PMN-LMA-SPI

Syntax Unsigned Integer

Length 4

Type 8

3GPP2-PMIP-NAI

This attribute specifies the PMIP NAI provided by AAA.

Syntax Opaque Value

Length 1-128

Type 26

Vendor ID 5535

VSA Type 192

3GPP2-Pre-Paid-Accounting-Quota

This attribute specifies the characteristics for PrePaid accounting of the volume and/or duration of a packet data session. It should be present in all on-line RADIUS Access-Request and on-line RADIUS Access-Accept messages and may be included in other RADIUS Access-Accept messages. Non-used Sub-Types by the PPC and PPS should be omitted.

Reason for initiating online quota update operation. This should be present in the Authorize-Only RADIUS Access-Request message. It indicates the reason for initiating the on-line quota update operation. Update reasons 6, 7, 8, and 9 indicate that the associated resources are released at the client side, and that therefore the PPS should not allocate a new quota in the RADIUS Access-Accept message.

Syntax Enumerated Integer. Supports the following value(s):

Pre-Initialization = 1
Initial-Request = 2
Threshold-Reached = 3
Quota-Reached = 4
Remote-Forced-Disconnect = 5
Client-Service-Termination = 6
Main-SI-Released = 7
Service-Instance-Not-Established = 8
Tariff-Switch-Update = 9
Incorrect-Quota-Type-Received = 10
Poorly-Formed-Quota-Attribute = 11

Length 2

Type 8

Pre-Paid-Server

PrePaid server IP address. This optional subtype indicates the address IPv4 of the serving PPS. If present, the Home RADIUS server uses this address to route the message to the serving PPS. The attribute may be sent by the Home RADIUS server. Multiple instances of this subtype may be present in a single PPAQ. If present in the incoming RADIUS Access-Accept message, the ASNGW should send this attribute back without modifying it in the subsequent RADIUS Access-Request message.

Syntax IPv4 Address

Length 4

Type 9

3GPP2-Pre-Paid-Acct-Capability

This attribute specifies the capability for PrePaid accounting for a packet data session. It contains the possible capabilities of the PrePaid client and the selected (by the PrePaid server) capability for the session. The absence of this VSA indicates that the client is not capable of PrePaid Accounting and the session should not use PrePaid accounting.

Type 26

Vendor ID 5535

VSA Type 91

Syntax Compound. Contains the following sub-attribute(s).

Available-In-Client

The optional Available-In-Client subtype, generated by the PPC, indicates the metering capabilities of the NAS and is be bitmap encoded.

Syntax Enumerated Integer. Supports the following value(s):

Supported_None = 0
Supported_Volume = 1
Supported_Duration = 2
Supported_Volume_And_Duration = 3
Supported_Tariff_Switch = 64
Supported_Volume_And_Duration_And_Tariff_Switch = 67

Length 4

Type 1

Selected-For-Session

The optional Selected-For-Session Sub-Type, generated by the PrePaid server, indicates the PrePaid Accounting capability to be used for a given session.

Syntax Enumerated Integer. Supports the following value(s):

Usage_None = 0
Usage_Volume = 1
Usage_Duration = 2
Usage_Volume_And_Duration = 3

Length 4

Type 5

3GPP2-QoS-Service-Opt-Profile

The attribute specifies the unauthorized packet data service options, the maximum number of simultaneous service instances of the given service option number and the total maximum number of simultaneous service instances.

Syntax Opaque Value

Length 8-247

Type 26

Vendor ID 5535

VSA Type 74

3GPP2-Release-Indicator-custom9

3GPP2 Release Indicator for custom9, reason/cause for session release.

Syntax Enumerated Integer. Supports the following value(s):

Unknown = 0
PPP-Timeout = 1
Handoff = 2
PPP-Termination = 3
Mobile-IP-Registration-Failure = 4
PPP-Renegotiation = 5
MIP-Registration-Revocation = 6
VolumeQuota-Reached = 8
DurationQuota-Reached = 9
Incompatible-Prepaid = 10

Length 4

Type 26

Vendor ID 5535

VSA Type 24

3GPP2-Release-Indicator-Old

3GPP2 old Standard Release Indicator, reason/cause for session release.

Syntax Enumerated Integer. Supports the following value(s):

Unknown = 0
PPP-Timeout = 1
Handoff = 2
PPP-Protocol-Failure = 3
PPP-Abnormal-Release = 4
PPP-Termination = 5
Mobile-IP-Registration-Failure = 6
Active-To-Dormant = 7

Length 4

Type 26

Vendor ID 5535

VSA Type 24

3GPP2-Release-Indicator-Prepaid

Syntax Enumerated Integer. Supports the following value(s):

TOPUP = 0
AOC = 1
OHHOLD = 2
Session_Term_or_OFFLINE = 3
CATALOG = 4
BLOCK = 5
Volume-Quota-Reached = 8
Duration-Quota-Reached = 9

Length 4

Type 26

Vendor ID 5535

VSA Type 24

3GPP2-Release-Indicator

This attribute specifies reasons for sending a stop record. The enumeration of this attribute conforms to IS-835-1.

Syntax Enumerated Integer. Supports the following value(s):

Unknown = 0
PPP-Timeout = 1
Handoff = 2
PPP-Termination = 3
Mobile-IP-Registration-Failure = 4
Abnormal-Terminations = 5
Termation-Dueto-Resource-Mgmt = 6
Service-Instance-Released = 7
VolumeQuota-Reached = 8
DurationQuota-Reached = 9
Incompatible-Prepaid = 10
Airlink-Parameter-Change = 11
TOD-Timer-Expiry = 12
Active-To-Dormant = 13
Flow-Deactivated = 15
PPP-Renegotiation = 1001
MIP-Lifetime-Expired = 1002
A11-Lifetime-Expired = 1003
MIP-Remote-Dereg = 1004
Tarrif-Boundary = 1006
PPP-Renegotiation-Handoff = 1007
MIP-Registration-Revocation = 1008

Length 4

Type 26

Vendor ID 5535

VSA Type 24

3GPP2-Remote-Addr-Table-Idx-Old

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 5535

VSA Type 71

3GPP2-Remote-Addr-Table-Index

This attribute contains the Remote Address Table Index used to generate remote address accounting records. Supported range is 1-65535. Only one 3GPP2-Remote-Addr-Table-Index can be associated with a session.

Type 26

Vendor ID 5535

VSA Type 71

Syntax Compound. Contains the following sub-attribute(s).

Table-Index

Syntax Unsigned Integer

Length 2

Type 1

Qualifier

Syntax Enumerated Integer. Supports the following value(s):

Exempt-From-Prepaid = 1
Summarize-Octet-Count = 2
Both = 3

Length 2

Type 2

3GPP2-Remote-IPv4-Address

This attribute allows the HA or PDSN to identify any IP address to be used for remote address-based accounting for the user. Up to 20 instances of the attribute are supported in the access response.

Type 26

Vendor ID 5535

VSA Type 59

Syntax Compound. Contains the following sub-attribute(s).

Address

This attribute contains an IPv4 address to be used for remote address based accounting for the user. The address is used in conjunction with the Netmask subattribute to define the range of addresses to be monitored.

Syntax IPv4 Address

Length 4

Type 1

Netmask

This attribute contains an IPv4 address mask that defines the set of remote addresses to be used for remote address based accounting.

Syntax IPv4 Address

Length 4

Type 2

Qualifier

Syntax Enumerated Integer. Supports the following value(s):

Exempt-From-Prepaid = 1
Summarize-Octet-Count = 2
Both = 3

Length 2

Type 3

3GPP2-Remote-IPv4-Addr-Octets

This attribute allows the HA or PDSN to identify any IP address to be used for remote address based accounting for the user. Up to 10 instances of the attribute are supported.

Type 26

Vendor ID 5535

VSA Type 72

Syntax Compound. Contains the following sub-attribute(s).

Address

This attribute contains an IPv4 address to be used for remote address based accounting for the user. The address is used in conjunction with the Netmask subattribute to define the range of addresses to be monitored.

Syntax IPv4 Address

Length 4

Type 1

Netmask

This attribute contains an IPv4 address mask that defines the set of remote addresses to be used for remote address based accounting.

Syntax IPv4 Address

Length 4

Type 2

Octets-Out

Indicates how many bytes have been sent to the remote address specification (corresponds to forward traffic direction).

Syntax Unsigned Integer

Length 4

Type 3

Octets-In

Indicates how many bytes have been received from the remote address specification (corresponds to reverse traffic direction).

Syntax Unsigned Integer

Length 4

Type 4

Table-Index

Syntax Unsigned Integer

Length 2

Type 5

Octets-Overflow-Out

Indicates how many times the forward octet overflow counter has wrapped around 2^32 over the course of the service being provided.

Syntax Unsigned Integer

Length 2

Specifies the reverse traffic type.

Syntax Enumerated Integer. Supports the following value(s):

Primary = 0
Secondary = 1

Length 4

Type 26

Vendor ID 5535

VSA Type 32

3GPP2-Security-Level

This attribute indicates the type of security that the home network mandates on the visited network.

Syntax Enumerated Integer. Supports the following value(s):

IPSec = 3
None = 4

Length 4

Type 26

Vendor ID 5535

VSA Type 2

3GPP2-Service-Option-Profile

This attribute specifies the authorized packet data service options, the maximum number of simultaneous service instances of the given service option number (n), and the total maximum number of simultaneous service instances. This attribute may appear in a RADIUS Access-Accept message.

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 5535

VSA Type 74

3GPP2-Service-Option

This attribute indicates the service option used for CDMA air interface.

Syntax Enumerated Integer. Supports the following value(s):

HSPD = 0x21
HRPD = 0x3b
LLAROHC = 0x3d
HRPD-AUX = 0x40
HRPD-AUX-IP = 0x43
eHRPD = 0x252
LTE = 0x253
UTRAN = 0x254
GERAN = 0x255 WIFI = 0x806c

Length 4

Type 26

Vendor ID 5535

VSA Type 16

3GPP2-Service-Reference-ID

Specifies the reference ID of the service instance as received in the A11 Registration Request. If the service instance is the main service instance, the main SI Indicator Sub-Type should be included.

Type 26

Vendor ID 5535

VSA Type 94

Syntax Compound. Contains the following sub-attribute(s).

SR-ID

The SR_ID value received in the A11 Registration-Request message.

Syntax Unsigned Integer

Length 2

Type 1

Main-SI-Indicator

Only included for the main service instance.

Syntax Enumerated Integer. Supports the following value(s):

Main-SI = 1

Length 2

Type 2

3GPP2-Serving-PCF

IP address of the serving PCF.

Syntax IPv4 Address

Length 4

Type 26

Vendor ID 5535

VSA Type 9

3GPP2-Session-Continue

This attribute when set to True means it is not the end of a session, and an Accounting Stop is immediately followed by an Account Start Record. False means end of a session.

Syntax Enumerated Integer. Supports the following value(s):

False = 0
True = 1

Length 4

Type 26

Vendor ID 5535

VSA Type 48

3GPP2-Session-Term-Capability

This attribute should be included in a RADIUS Access-request message to the Home RADIUS server and should contain the value 3 to indicate that the PDSN and HA support both Dynamic authorization with RADIUS and Registration Revocation for Mobile IPv4. The attribute should also be included in the RADIUS Access-Accept message and should contain the preferred resource management mechanism by the home network, which should be used for the session and may include values 1 to 3.

Syntax Enumerated Integer. Supports the following value(s):

Only_Dynamic_Auth_Extn_to_Radius = 0x00000001
Only_Reg_Revocation_in_MIP = 0x00000002
Both_Dynamic_Auth_And_Reg_Revocation_in_MIP = 0x00000003

Length 4

Type 26

Vendor ID 5535

VSA Type 88

3GPP2-S-Key

This attribute contains the HA IKE key in encrypted format.

Syntax Opaque Value

Length 1-247

Type 26

Vendor ID 5535

VSA Type 54

3GPP2-S-Lifetime

This attribute contains the lifetime of the 'S' secret parameter used to make the IKE pre-shared secret. indicating the time in seconds since January 1, 1970 00:00 UTC. Note that this is equivalent to the UNIX operating system expression of time.

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 5535

VSA Type 56

3GPP2-S-Request

This attribute indicates whether the HA requests a shared secret 'S'.

Syntax Enumerated Integer. Supports the following value(s):

No = 0
Yes = 1

Length 4

Type 26

Vendor ID 5535

VSA Type 55

3GPP2-Subnet

This attribute specifies the subnet information of the HRPD RAN.

Type 26

Vendor ID 5535

VSA Type 108

Syntax Compound. Contains the following sub-attribute(s).

Rev-A-Subnet

This attribute specifies the subnet information of the HRPD RAN.

Syntax Opaque Value

Length 1-19

Type 1

Rev-A-Sector-Id

This attribute specifies the Sector ID information of the HRPD RAN.

Syntax Opaque Value

Length 1-18

Type 2

3GPP2-S-Unencrypted

This attribute contains the HA IKE key in plain format.

Syntax Opaque Value

Length 1-247

Type 26

Vendor ID 5535

VSA Type 54

3GPP2-User-Zone

This attribute describes the Tiered Services user zone. The least significant 16 bits are the user zone ID, the next significant 15 bits are the user zone system ID, and the most significant bit is zero.

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 5535

VSA Type 11

3GPP-Allocate-IPType

This attribute indicates whether the Access-Request is sent for user authentication only and/or for allocation of IPv4 and/or IPv6 address.

Syntax Enumerated Integer. Supports the following value(s):

none = 0
ipv4 = 1
ipv6 = 2
ipv4-or-ipv6 = 3

Length 4

Type 26

Vendor ID 10415

VSA Type 27

3GPP-CAMEL-Charging-Info

This attribute contains the received CAMEL charging information. CAMEL charging information is applicable to GGSN.

Syntax Opaque Value

Length 1-255

Type 26

Vendor ID 10415

VSA Type 24

3GPP-CG-Address

This attribute identifies the charging gateway address.

Syntax IPv4 Address

Length 4

Type 26

Vendor ID 10415

VSA Type 4

This attribute specifies the QoS profile to be used for the subscriber.

Syntax ThreeGPP-Negotiated-QoS-Profile

Type 26

Vendor ID 10415

VSA Type 5

3GPP-NSAPI

This attribute specifies the value of the NSAPI of the PDP context that the RADIUS message is related to. It is encoded as its hexadecimal representation, using 1 UTF-8 encoded digit.

Syntax Opaque Value

Length 1

Type 26

Vendor ID 10415

VSA Type 10

3GPP-Packet-Filter

This compound attribute specifies the Packet Filter used for the PDP context.

Length 65

Specifies the IPv6 Flow Label.

Syntax Opaque value

Length 3

Type 14

3GPP-PDP-Type

This attribute identifies the PDP Context type.

Syntax Enumerated Integer. Supports the following value(s):

ipv4 = 0
ppp = 1
ipv6 = 2
ipv4-or-ipv6 = 3
non-ip = 4

Type 26

Vendor ID 5535

VSA Type 224

Acct-Authentic

This attribute is included in Accounting-Request packets to indicate how the session was authenticated (RADIUS or locally).

Syntax Enumerated Integer. Supports the following value(s):

None = 0
RADIUS = 1
Local = 2
Remote = 3
Diameter = 4

This attribute indicates the event for the session.

Syntax Enumerated Integer. Supports the following value(s):

Start = 1
Stop = 2
Interim-Update = 3
Accounting-On = 7
Accounting-Off = 8
Tunnel-Start = 9
Tunnel-Stop = 10
Tunnel-Reject = 11
Tunnel-Link-Start = 12
Tunnel-Link-Stop = 13
Tunnel-Link-Reject = 14
Failed = 15

Length 4

Type 40

Vendor ID N/A

VSA Type N/A

Acct-Termination-Cause

This attribute indicates why the session was terminated.

Syntax Enumerated Integer. Supports the following value(s):

User_Request = 1
Lost_Carrier = 2
Lost_Service = 3
Idle_Timeout = 4
Session_Timeout = 5
Admin_Reset = 6
Admin_Reboot = 7
Port_Error = 8
NAS_Error = 9
NAS_Request = 10
NAS_Reboot = 11
Port_Unneeded = 12
Port_Preempted = 13
Port_Suspended = 14
Service_Unavailable = 15
Callback = 16
User_Error = 17
Host_Request = 18
Supplicant_Restart = 19
Reauthentication_Failure = 20
Port_Reinitialized = 21
Port_Administratively_Disabled = 22
Inter-PDSN-Handoff = 99
Long-Duration-Timeout = 1001
Invalid-Source-Address = 1002
Duplicate-IMSI = 1003
Interim-Update = 1004
Hotlining-Status-Change = 1005

Length 1-249

Type 26

Vendor ID 9

VSA Type 1

CS-Prepaid-Quota

Syntax String

Length 1-252

Type 26

Vendor ID 9

VSA Type 253

CS-Prepaid-Time-Quota

Syntax String

Length 1-252

Type 26

Vendor ID 9

VSA Type 102

CS-Prepaid-Volume-Quota

Syntax String

Length 1-252

Type 26

Vendor ID 9

VSA Type 101

CS-Service-Name

Syntax String

Length 1-252

Type 26

Vendor ID 9

VSA Type 251

CUI

Chargeable User Identity (CUI) is a unique temporary handle to the user responsible for paying bill. Set to NULL in Initial Access Request and set to value sent by AAA in subsequent messages.

Syntax Opaque Value

Length 0-253

Type 105

Vendor ID N/A

VSA Type N/A

Digest-Opaque

This attribute holds the opaque parameter that is passed to the SIP client.

Syntax Opaque Value

Length 0-253

Type 116

Vendor ID N/A

VSA Type N/A

Digest-Qop

This attribute holds the quality of protection parameter that influences the HTTP digest calculation.

Syntax Opaque Value

Length 0-253

Type 110

Vendor ID N/A

VSA Type N/A

Digest-Realm

This attribute describes a protection space component of the RADIUS server.

Syntax Opaque Value

Length 0-253

Type 104

Vendor ID N/A

VSA Type N/A

Digest-Response-Auth

This enables the RADIUS server to prove possession of the password.

Syntax Opaque Value

Length 0-253

Type 106

Vendor ID N/A

VSA Type N/A

Syntax Opaque Value

Length 0-253

Type 102

Vendor ID N/A

VSA Type N/A

DSCP_IP_Address

radius_attribute_DSCP_IP_Address

Syntax IPv4 Address

Length 4

Type 26

Vendor ID 5535

VSA Type 245

EAP-Message

The EAP exchanged transported over RADIUS.

Syntax Opaque Value

Length 0-253

Type 79

Vendor ID N/A

VSA Type N/A

Error-Cause

It is possible that the NAS cannot honor Disconnect-Request or CoA-Request messages for some reason. The Error-Cause Attribute provides more detail on the cause of the problem. It may be included within Disconnect-ACK, Disconnect-NAK, and CoA-NAK messages.

Syntax Enumerated Integer. Supports the following value(s):

Residual-Session-Context-Remove = 201
Inavlid-EAP-Packet = 202
Unsupported-Attribute = 401
Missing-Attribute = 402
NAS-Identification-Mismatch = 403
Invalid-Request = 404
Unsupported-Service = 405
Unsupported-Extension = 406
Administratively-Prohibited = 501
Request-Not-Routable = 502
Session-Context-Not-Found = 503
Session-Context-Not-Removable = 504
Other-Proxy-Processing-Error = 505
Resources-Unavailable = 506
Request-Initiated = 507
Session-Context-Not-Removable-Dormant = 599

Length 4

Type 101

Vendor ID N/A

VSA Type N/A

Event-Timestamp

This attribute is a timestamp of when the event being logged occurred, indicating the time in seconds since January 1, 1970 00:00 UTC. Note that this is equivalent to the UNIX operating system expression of time.

Syntax Unsigned Integer

Length 4

Type 55

Vendor ID N/A

VSA Type N/A

FA-RK-KEY

This attribute contains the encrypted FA-RK-KEY. The FA-RK determined during EAP authentication by the RADIUS server and passed on to the NAS upon successful EAP authentication. It is used by the NAS to generate MN-FA keys.

Syntax Opaque Value

Length 1-244

Type 26

Vendor ID 24757

VSA Type 14

FA-RK-SPI

SPI used for the FA-RK associated with FA-RK Key for generating MN-FA key for WiMAX call

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 24757

VSA Type 61

Filter-Id

This attribute identifies the IP access-list/filter by name.

Syntax String

Length 1-253

Type 11

Vendor ID N/A

VSA Type N/A

Framed-Compression

This attribute indicates the compression protocol to be used.

Syntax Enumerated Integer. Supports the following value(s):

None = 0
VJ_TCP_IP_header_compression = 1
IPX_header_compression = 2
Stac_LZS_compressions = 3

PPP = 1
SLIP = 2
ARAP = 3
Gandalf_proprietary___ = 4
Xylogics_proprietary_IPX_SLIP = 5
X_75_Synchronous = 6
GPRS_PDP_Context = 7

Length 4

Type 7

Vendor ID N/A

VSA Type N/A

Framed-Route

This attribute specifies the subnet route to be installed in GGSN for the mobile router.

Syntax Opaque Value

Length 1-64

Type 22

Vendor ID N/A

VSA Type N/A

Geographical-Location

This attribute contains the information of geographical location as reported by HNB.

Syntax Opaque Value

Length 10

Type 26

Vendor ID 9

VSA Type 114

GGSN-GTP-IP-Address

Same as 3GPP-GGSN-Address standard attribute; non-standard behavior for use in custom dictionary.

Syntax IPv4 Address

Length 4

Type 230

Vendor ID N/A

VSA Type N/A

GGSN-IP-Address

Syntax IPv4 Address

Length 4

Type 227

Vendor ID N/A

VSA Type N/A

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 5535

VSA Type 246

This attribute describes the resource number assigned to the user session. It is guaranteed to be unique at a particular instance in time for a particular chassis.

Syntax Unsigned Integer

Length 4

Type 5

Vendor ID N/A

VSA Type N/A

NAS-Port-Type

This attribute indicates the physical layer that the session is using.

Syntax Enumerated Integer. Supports the following value(s):

Async = 0
Sync = 1
ISDN_Sync = 2
ISDN_Async_V_120 = 3
ISDN_Async_V_110 = 4
Virtual = 5
PIAFS = 6
HDLC_Clear_Channel = 7
X_25 = 8
X_75 = 9
G_3_Fax = 10
SDSL_Symmetric_DSL = 11
ADSL_CAP = 12
ADSL_DMT = 13
IDSL = 14
Ethernet = 15
xDSL = 16
Cable = 17
Wireless_Other = 18
Wireless_IEEE_802_11 = 19
Token_Ring = 20
FDDI = 21
Wireless_CDMA2000 = 22
Wireless_UMTS = 23
HRPD = 24
IAPP = 25
FTTP = 26
Wireless_IEEE_802_16 = 27
Wireless_IEEE_802_20 = 28
Wireless_IEEE_802_22 = 29
Wireless_XGP = 36
Wireless_DHCP = 41

Length 4

Type 61

Vendor ID N/A

VSA Type N/A

Syntax Opaque Value

Length 4

Type 226

Vendor ID N/A

VSA Type N/A

Presence

This attribute is used to indicate the availablility of Location based service on HNB.

Syntax Opaque Value

Length 1

Type 26

Vendor ID 9

VSA Type 118

Price-Plan

Opaque 1 byte value received from customer RADIUS server in Access Request. Used in custom dictionary.

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 5535

VSA Type 196

Primary-DNS-Server

Same as SN1-Primary-DNS-Server standard attribute; non-standard behavior for use in custom dictionary.

Syntax IPv4 Address

Length 4

Type 135

Vendor ID N/A

VSA Type N/A

Prohibit-Payload-Compression1

Flag to prohibit SGSN from compressing user data on per APN basis.

Type 26

Syntax Enumerated Integer. Supports the following value(s):

Allowed = 0
Prohibited = 1

Length 2

Vendor ID 8164

VSA Type 237

Prohibit-Payload-Compression

Flag to prohibit SGSN from compressing user data on per APN basis.

Type 26

Syntax Enumerated Integer. Supports the following value(s):

Allowed = 0
Prohibited = 1

Length 2

Vendor ID 8164

VSA Type 237

Reject-Cause

This attribute indicates the cause for sending Access-Reject.

Syntax Opaque Value

Length 1

Type 26

Vendor ID 9

VSA Type 116

Reply-Message

This attribute indicates the text to be displayed to a user upon completion of authentication, whether successful or not.

Syntax String

Length 1-253

Type 18

Vendor ID N/A

VSA Type N/A

RRQ-HA-IP

Syntax Opaque Value

Length 4-16

Type 26

Vendor ID 24757

VSA Type 18

RRQ-MN-HA-KEY

MN-HA key computed using RRQ-HA-IP if sent in Access request.

Syntax Opaque Value

Length 1-244

Type 26

Vendor ID 24757

VSA Type 19

Secondary-DNS-Server

Same as SN1-Secondary-DNS-Server standard attribute; non-standard behavior for use in custom dictionary.

Syntax IPv4 Address

Length 4

Type 136

Vendor ID N/A

VSA Type N/A

Selection-Mode

Same as 3GPP-Selection-Mode standard attribute; non-standard behavior for use in custom dictionary.

Syntax Opaque Value

Length 1

Type 229

Vendor ID N/A

VSA Type N/A

Service-Selection

This attribute specifies the service network of UE (APN name).

Syntax Opaque Value

Length 1-253

Type 146

Vendor ID N/A

VSA Type N/A

Service-Type

This attribute identifies the service that the user is attempting to use (Access-Request), or is granted to use (Access-Accept).

Syntax Enumerated Integer. Supports the following value(s):

Login = 1
Framed = 2
Callback_Login = 3
Callback_Framed = 4
Outbound = 5
Administrative = 6
NAS_Prompt = 7
Authenticate_Only = 8
Callback_NAS_Prompt = 9
Call_Check = 10
Callback_Administrative = 11
Voice = 12
Fax = 13
Modem_Relay = 14
IAPP_Register = 15
IAPP_AP_Check = 16
Authorize_Only = 17
Inspector = 19650516
Security_Admin = 19660618

Length 4

Type 6

Vendor ID N/A

VSA Type N/A

Session-Timeout

This attribute sets the maximum session time in seconds. After this session time expires the chassis will tear down the session.

Syntax Unsigned Integer

Length 4

Type 27

Vendor ID N/A

VSA Type N/A

SGSN-IP-Address

Same as 3GPP-SGSN-Address standard attribute; non-standard behavior for use in custom dictionary.

Syntax IPv4 Address

Length 4

Type 228

Vendor ID N/A

VSA Type N/A

SIP-AOR

This attribute identifies the URI, the use of which must be authenticated and authorized.

Syntax Opaque Value

Length 0-253

Type 122

Vendor ID N/A

VSA Type N/A

SN1-Access-link-IP-Frag

This attribute specifies what to do when data received for the subscriber on the Access link that needs to be fragmented and the DF bit is either set or unset. The default is Normal.

Syntax Enumerated Integer. Supports the following value(s):

Normal = 0
DF-Ignore = 1
DF-Fragment-ICMP-Notify = 2

None = 0
CLI = 1
FTP = 2
CLI-FTP = 3
Intercept = 4
CLI-Intercept = 5
CLI-Intercept-FTP = 7
ECS = 8
CLI-ECS = 9
CLI-FTP-ECS = 11
CLI-Intercept-ECS = 13
CLI-Intercept-FTP-ECS = 15 NoCons = 16
CLI-NoCons = 17
FTP-NoCons = 18
CLI-FTP-NoCons = 19
Intercept-NoCons = 20
CLI-Intercept-NoCons = 21
CLI-Intercept-FTP-NoCons = 23
ECS-NoCons = 24
CLI-ECS-NoCons = 25
CLI-FTP-ECS-NoCons = 27
CLI-Intercept-ECS-NoCons = 29
CLI-Intercept-FTP-ECS-NoCons = 31

Length 4

Type 26

Vendor ID 8164

VSA Type 21

SN1-Assigned-VLAN-ID

The VLAN ID assigned to the subscriber.

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 8164

VSA Type 152

SN1-Call-Id

Internal system generated call ID number for the session.

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 8164

VSA Type 251

SN1-Cause-For-Rec-Closing

This attribute contains a reason for the release of the CDR.

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 8164

VSA Type 139

SN1-CFPolicy-ID

This attribute contains the Content Filtering policy ID.

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 8164

VSA Type 220

SN1-Change-Condition

This attribute defines the reason for closing the container.

Syntax Enumerated Integer. Supports the following value(s):

QOSCHANGE = 0
TARIFFTIMECHANGE = 1
SGSNCHANGE = 500

Length 4

Type 26

Vendor ID 8164

VSA Type 140

SN1-Charging-VPN-Name

Charging VPN Name.

Syntax String

Length 1-252

Type 26

Vendor ID 8164

VSA Type 137

SN1-Chrg-Char-Selection-Mode

This attribute contains the charging characteristics type that the GSNs applied to the CDR.

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 8164

VSA Type 138

SN1-Data-Tunnel-Ignore-DF-Bit

This attribute specifies if the PDSN/FA or HA should ignore the DF bit in the IPv4 header when encapsulating the IPv4 packet in MIP, and therefore fragmenting the resulting tunneled packet if necessary. The default is not to ignore the DF bit.

Syntax Enumerated Integer. Supports the following value(s):

Disabled = 0
Enabled = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 49

SN1-DHCP-Lease-Expiry-Policy

This attribute specifies whether to renew or disconnect on expiry of IP address lease time.

Type 26

Syntax Enumerated Integer. Supports the following value(s):

auto-renew = 0
disconnect = 1

Length 4

Vendor ID 8164

VSA Type 157

SN1-Disconnect-Reason

This attribute contains the reason the user was disconnected from service.

Syntax Enumerated Integer. Supports the following value(s):

Not-Defined = 0
Admin-Disconnect = 1
Remote-Disconnect = 2
Local-Disconnect = 3
Disc-No-Resource = 4
Disc-Excd-Service-Limit = 5
PPP-LCP-Neg-Failed = 6
PPP-LCP-No-Response = 7
PPP-LCP-Loopback = 8
PPP-LCP-Max-Retry = 9
PPP-Echo-Failed = 10
PPP-Auth-Failed = 11
PPP-Auth-Failed-No-AAA-Resp = 12
PPP-Auth-No-Response = 13
PPP-Auth-Max-Retry = 14
Invalid-AAA-Attr = 15
Failed-User-Filter = 16
Failed-Provide-Service = 17
Invalid-IP-Address-AAA = 18
Invalid-IP-Pool-AAA = 19
PPP-IPCP-Neg-Failed = 20
PPP-IPCP-No-Response = 21
PPP-IPCP-Max-Retry = 22
PPP-No-Rem-IP-Address = 23
Inactivity-Timeout = 24
Session-Timeout = 25
Max-Data-Excd = 26
Invalid-IP-Source-Address = 27
MSID-Auth-Failed = 28
MSID-Auth-Failed-No-AAA-Resp = 29
A11-Max-Retry = 30
A11-Lifetime-Expired = 31
A11-Message-Integrity-Failure = 32
PPP-lcp-remote-disc = 33
Session-setup-timeout = 34
PPP-keepalive-failure = 35
Flow-add-failed = 36
Call-type-detection-failed = 37
Wrong-ipcp-params = 38
MIP-remote-dereg = 39
MIP-lifetime-expiry = 40
MIP-proto-error = 41
MIP-auth-failure = 42
MIP-reg-timeout = 43
Invalid-dest-context = 44
Source-context-removed = 45
Destination-context-removed = 46
Req-service-addr-unavailable = 47
Demux-mgr-failed = 48
Internal-error = 49
AAA-context-removed = 50
invalid-service-type = 51
mip-relay-req-failed = 52
mip-rcvd-relay-failure = 53
ppp-restart-inter-pdsn-handoff = 54
gre-key-mismatch = 55
invalid_tunnel_context = 56
no_peer_lns_address = 57
failed_tunnel_connect = 58
l2tp-tunnel-disconnect-remote = 59
l2tp-tunnel-timeout = 60
l2tp-protocol-error-remote = 61
l2tp-protocol-error-local = 62
l2tp-auth-failed-remote = 63
l2tp-auth-failed-local = 64
l2tp-try-another-lns-from-remote = 65
l2tp-no-resource-local = 66
l2tp-no-resource-remote = 67
l2tp-tunnel-disconnect-local = 68
l2tp-admin-disconnect_remote = 69
l2tpmgr-reached-max-capacity = 70
MIP-reg-revocation = 71
path-failure = 72
dhcp-relay-ip-validation-failed = 73
gtp-unknown-pdp-addr-or-pdp-type = 74
gtp-all-dynamic-pdp-addr-occupied = 75
gtp-no-memory-is-available = 76
dhcp-relay-static-ip-addr-not-allowed = 77
dhcp-no-ip-addr-allocated = 78
dhcp-ip-addr-allocation-tmr-exp = 79
dhcp-ip-validation-failed = 80
dhcp-static-addr-not-allowed = 81
dhcp-ip-addr-not-available-at-present = 82
dhcp-lease-expired = 83
lpool-ip-validation-failed = 84
lpool-static-ip-addr-not-allowed = 85
static-ip-validation-failed = 86
static-ip-addr-not-present = 87
static-ip-addr-not-allowed = 88
radius-ip-validation-failed = 89
radius-ip-addr-not-provided = 90
invalid-ip-addr-from-sgsn = 91
no-more-sessions-in-aaa = 92
ggsn-aaa-auth-req-failed = 93
conflict-in-ip-addr-assignment = 94
apn-removed = 95
credits-used-bytes-in = 96
credits-used-bytes-out = 97
credits-used-bytes-total = 98
prepaid-failed = 99
l2tp-ipsec-tunnel-failure = 100
l2tp-ipsec-tunnel-disconnected = 101
mip-ipsec-sa-inactive = 102
Long-Duration-Timeout = 103
proxy-mip-registration-failure = 104
proxy-mip-binding-update = 105
proxy-mip-inter-pdsn-handoff-require-ip-address = 106
proxy-mip-inter-pdsn-handoff-mismatched-address = 107
Local-purge = 108
failed-update-handoff = 109
closed_rp-handoff-complete = 110
closed_rp-duplicate-session = 111
closed_rp-handoff-session-not-found = 112
closed_rp-handoff-failed = 113
pcf-monitor-keep-alive-failed = 114
call-internal-reject = 115
call-restarted = 116
a11-mn-ha-auth-failure = 117
a11-badly-formed = 118
a11-t-bit-not-set = 119
a11-unsupported-vendor-id = 120
a11-mismatched-id = 121
mipha-dup-home-addr-req = 122
mipha-dup-imsi-session = 123
ha-unreachable = 124
IPSP-addr-in-use = 125
mipfa-dup-home-addr-req = 126
mipha-ip-pool-busyout = 127
inter-pdsn-handoff = 128
active-to-dormant = 129
ppp-renegotiation = 130
active-start-param-change = 131
tarrif-boundary = 132
a11-disconnect-no-active-stop = 133
nw-reachability-failed-reject = 134
nw-reachability-failed-redirect = 135
container-max-exceeded = 136
static-addr-not-allowed-in-apn = 137
static-addr-required-by-radius = 138
static-addr-not-allowed-by-radius = 139
mip-registration-dropped = 140
counter-rollover = 141
constructed-nai-auth-fail = 142
inter-pdsn-service-optimize-handoff-disabled = 143
gre-key-collision = 144
inter-pdsn-service-optimize-handoff-triggered = 145
intra-pdsn-handoff-triggered = 146
delayed-abort-timer-expired = 147
Admin-AAA-disconnect = 148
Admin-AAA-disconnect-handoff = 149
PPP-IPV6CP-Neg-Failed = 150
PPP-IPV6CP-No-Response = 151
PPP-IPV6CP-Max-Retry = 152
PPP-Restart-Invalid-source-IPV4-address = 153
a11-disconnect-handoff-no-active-stop = 154
call-restarted-inter-pdsn-handoff = 155
call-restarted-ppp-termination = 156
mipfa-resource-conflict = 157
failed-auth-with-charging-svc = 158
mipha-dup-imsi-session-purge = 159
mipha-rev-pending-newcall = 160
volume-quota-reached = 161
duration-quota-reached = 162
gtp-user-authentication-failed = 163
MIP-reg-revocation-no-lcp-term = 164
MIP-private-ip-no-rev-tunnel = 165
Invalid-Prepaid-AAA-attr-in-auth-response = 166
mipha-prepaid-reset-dynamic-newcall = 167
gre-flow-control-timeout = 168
mip-paaa-bc-query-not-found = 169
mipha-dynamic-ip-addr-not-available = 170
a11-mismatched-id-on-handoff = 171
a11-badly-formed-on-handoff = 172
a11-unsupported-vendor-id-on-handoff = 173
a11-t-bit-not-set-on-handoff = 174
MIP-reg-revocation-i-bit-on = 175
A11-RRQ-Deny-Max-Count = 176
Dormant-Transition-During-Session-Setup = 177
PPP-Rem-Reneg-Disc-Always-Cfg = 178
PPP-Rem-Reneg-Disc-NAI-MSID-Mismatch = 179
mipha-subscriber-ipsec-tunnel-down = 180
mipha-subscriber-ipsec-tunnel-failed = 181
mipha-subscriber-ipsecmgr-death = 182
flow-is-deactivated = 183
ecsv2-license-exceeded = 184
IPSG-Auth-Failed = 185
driver-initiated = 186
ims-authorization-failed = 187
service-instance-released = 188
flow-released = 189
ppp-renego-no-ha-addr = 190
intra-pdsn-handoff = 191
overload-disconnect = 192
css-service-not-found = 193
Auth-Failed = 194
dhcp-client-sent-release = 195
dhcp-client-sent-nak = 196
msid-dhcp-chaddr-mismatch = 197
link-broken = 198
prog-end-timeout = 199
qos-update-wait-timeout = 200
css-synch-cause = 201
Gtp-context-replacement = 202
PDIF-Auth-failed = 203
l2tp-unknown-apn = 204
ms-unexpected-network-reentry = 205
r6-invalid-nai = 206
eap-max-retry-reached = 207
vbm-hoa-session-disconnected = 208
vbm-voa-session-disconnected = 209
in-acl-disconnect-on-violation = 210
eap-msk-lifetime-expiry = 211
eap-msk-lifetime-too-low = 212
mipfa-inter-tech-handoff = 213
r6-max-retry-reached = 214
r6-nwexit-recd = 215
r6-dereg-req-recd = 216
r6-remote-failure = 217
r6r4-protocol-errors = 218
wimax-qos-invalid-aaa-attr = 219
npu-gre-flows-not-available = 220
r4-max-retry-reached = 221
r4-nwexit-recd = 222
r4-dereg-req-recd = 223
r4-remote-failure = 224
ims-authorization-revoked = 225
ims-authorization-released = 226
ims-auth-decision-invalid = 227
mac-addr-validation-failed = 228
excessive-wimax-pd-flows-cfgd = 229
sgsn-canc-loc-sub = 230
sgsn-canc-loc-upd = 231
sgsn-mnr-exp = 232
sgsn-ident-fail = 233
sgsn-sec-fail = 234
sgsn-auth-fail = 235
sgsn-glu-fail = 236
sgsn-imp-det = 237
sgsn-smgr-purge = 238
sgsn-subs-handed-to-peer = 239
sgsn-dns-fail-inter-rau = 240
sgsn-cont-rsp-fail = 241
sgsn-hlr-not-found-for-imsi = 242
sgsn-ms-init-det = 243
sgsn-opr-policy-fail = 244
sgsn-duplicate-context = 245
hss-profile-update-failed = 246
sgsn-no-pdp-activated = 247
asnpc-idle-mode-timeout = 248
asnpc-idle-mode-exit = 249
asnpc-idle-mode-auth-failed = 250
asngw-invalid-qos-configuration = 251
sgsn-dsd-allgprswithdrawn = 252
r6-pmk-key-change-failure = 253
sgsn-illegal-me = 254
sess-termination-timeout = 255
sgsn-sai-fail = 256
sgsn-rnc-removal = 257
sgsn-rai-removal = 258
sgsn-init-deact = 259
ggsn-init-deact = 260
hlr-init-deact = 261
ms-init-deact = 262
sgsn-detach-init-deact = 263
sgsn-rab-rel-init-deact = 264
sgsn-iu-rel-init-deact = 265
sgsn-gtpu-path-failure = 266
sgsn-gtpc-path-failure = 267
sgsn-local-handoff-init-deact = 268
sgsn-remote-handoff-init-deact = 269
sgsn-gtp-no-resource = 270
sgsn-rnc-no-resource = 271
sgsn-odb-init-deact = 272
sgsn-invalid-ti = 273
sgsn-actv-rejected-due-to-rnc = 274
sgsn-apn-restrict-vio = 275
sgsn-actv-rejected-by-sgsn = 276
sgsn-abnormal-deact = 277
sgsn-actv-rejected-by-ggsn = 278
sgsn-err-ind = 279
asngw-non-anchor-prohibited = 280
asngw-im-entry-prohibited = 281
session-idle-mode-entry-timeout = 282
session-idle-mode-exit-timeout = 283
asnpc-ms-power-down-nwexit = 284
asnpc-r4-nwexit-recd = 285
sgsn-iu-rel-before-call-est = 286
ikev2-subscriber-ipsecmgr-death = 287
All-dynamic-pool-addr-occupied = 288
mip6ha-ip-addr-not-available = 289
bs-monitor-keep-alive-failed = 290
sgsn-att-in-reg-state = 291
sgsn-inbound-srns-in-reg-state = 292
dt-ggsn-tun-reestablish-failed = 293
sgsn-unknown-pdp = 294
sgsn-pdp-auth-failure = 295
sgsn-duplicate-pdp-context = 296
sgsn-no-rsp-from-ggsn = 297
sgsn-failure-rsp-from-ggsn = 298
sgsn-apn-unknown = 299
sgsn-pdp-status-mismatch = 300
sgsn-attach-on-attch-init-abort = 301
sgsn-iu-rel-in-israu-init-abort = 302
sgsn-smgr-init-abort = 303
sgsn-mm-ctx-cleanup-init-abort = 304
sgsn-unknown-abort = 305
sgsn-guard-timeout-abort = 306
vpn-bounce-dhcpip-validate-req = 307
mipv6-id-mismatch = 308
aaa-session-id-not-found = 309
x1-max-retry-reached = 310
x1-nwexit-recd = 311
x1-dereg-req-recd = 312
x1-remote-failure = 313
x1x2-protocol-errors = 314
x2-max-retry-reached = 315
x2-nwexit-recd = 316
x2-dereg-req-recd = 317
x2-remote-failure = 318
x1-pmk-key-change-failure = 319
sa-rekeying-failure = 320
sess-sleep-mode-entry-timeout = 321
phsgw-non-anchor-prohibited = 322
asnpc-pc-relocation-failed = 323
asnpc-pc-relocation = 324
auth_policy_mismatch = 325
sa-lifetime-expiry = 326
asnpc-del-ms-entry-recd = 327
phspc-sleep-mode-timeout = 328
phspc-sleep-mode-exit = 329
phspc-sleep-mode-auth-failed = 330
phspc-ms-power-down-nwexit = 331
phspc-x2-nwexit-recd = 332
invalid-nat-config = 333
asngw-tid-entry-not-found = 334
No-NAT-IP-Address = 335
excessive-phs-pd-flows-cfgd = 336
phsgw-invalid-qos-configuration = 337
Interim-Update = 338
sgsn-attach-abrt-rad-lost = 339
sgsn-inbnd-irau-abrt-rad-lost = 340
ike-keepalive-failed = 341
sgsn-attach-abrt-ms-suspend = 342
sgsn-inbnd-irau-abrt-ms-suspend = 343
duplicate-session-detected = 344
sgsn-xid-response-failure = 345
sgsn-nse-cleanup = 346
sgsn-gtp-req-failure = 347
sgsn-imsi-mismatch = 348
sgsn-bvc-blocked = 349
sgsn-attach-on-inbound-irau = 350
sgsn-attach-on-outbound-irau = 351
sgsn-incorrect-state = 352
sgsn-t3350-expiry = 353
sgsn-page-timer-expiry = 354
phsgw-tid-entry-not-found = 355
phspc-del-ms-entry-recd = 356
sgsn-pdp-local-purge = 357
phs-invalid-nai = 358
session-sleep-mode-exit-timeout = 359
sgsn-offload-phase2 = 360
phs-thirdparty-auth-fail = 361
remote-error-notify = 362
no-response = 363
PDG-Auth-failed = 364
mme-s1AP-send-failed = 365
mme-egtpc-connection-failed = 366
mme-egtpc-create-session-failed = 367
mme-authentication-failure = 368
mme-ue-detach = 369
mme-mme-detach = 370
mme-hss-detach = 371
mme-pgw-detach = 372
mme-sub-validation-failure = 373
mme-hss-connection-failure = 374
mme-hss-user-unknown = 375
dhcp-lease-mismatch-detected = 376
nemo-link-layer-down = 377
eapol-max-retry-reached = 378
sgsn-offload-phase3 = 379
mbms-bearer-service-disconnect = 380
disconnect-on-violation-odb = 381
disconn-on-violation-focs-odb = 382
CSCF-REG-Admin-disconnect = 383
CSCF-REG-User-disconnect = 384
CSCF-REG-Inactivity-timeout = 385
CSCF-REG-Network-disconnect = 386
CSCF-Call-Admin-disconnect = 387
CSCF-CAll-User-disconnect = 388
CSCF-CALL-Local-disconnect = 389
CSCF-CALL-No-Resource = 390
CSCF-CALL-No-Respone = 391
CSCF-CALL-Inactivity-timeout = 392
CSCF-CALL-Media-Auth-Failure = 393
CSCF-REG-No-Resource = 394
ms-unexpected-idle-mode-entry = 395
re-auth-failed = 396
sgsn-pdp-nse-cleanup = 397
sgsn-mm-ctxt-gtp-no-resource = 398
unknown-apn = 399
gtpc-path-failure = 400
gtpu-path-failure = 401
actv-rejected-by-sgsn = 402
sgsn-pdp-gprs-camel-release = 403
sgsn-check-imei-failure = 404
sgsn-sndcp-init-deact = 405
sgsn-pdp-inactivity-timeout = 406
sfw-policy-removed-mid-session = 407
FNG-Auth-failed = 408
ha-stale-key-disconnect = 409
No-IPV6-address-for-subscriber = 410
prefix-registration-failure = 411
disconnect-from-policy-server = 412
s6b-auth-failed = 413
gtpc-err-ind = 414
gtpu-err-ind = 415
invalid-pdn-type = 416
aaa-auth-req-failed = 417
apn-denied-no-subscription = 418
Sgw-context-replacement = 419
dup-static-ip-addr-req = 420
apn-restrict-violation = 421
invalid-wapn = 422
ttg-nsapi-allocation-failed = 423
mandatory-gtp-ie-missing = 424
aaa-unreachable = 425
asngw-service-flow-deletion = 426
CT-PMIP-RRQ-NVSE-Value-Change = 427
tcp-read-failed = 428
tcp-write-failed = 429
ssl-handshake-failed = 430
ssl-renegotiate-failed = 431
ssl-bad-message = 432
ssl-alert-received = 433
ssl-disconnect = 434
ssl-migration = 435
sgsn-ard-failure = 436
sgsn-camel-release = 437
sgsn-egtpc-connection-failed = 438
sgsn-egtpc-create-sess-failed = 439
sgsn-hss-detach = 440
sgsn-hss-connection-failure = 441
sgsn-pgw-detach = 442
sgsn-s5-s8-no-support-for-apn = 443
sgsn-no-rab-for-gbr-bearer = 444
sgsn-sgw-selection-failure = 445
sgsn-pgw-selection-failure = 446
Hotlining-Status-Change = 447
ggsn-no-rsp-from-sgsn = 448
diameter-protocol-error = 449
diameter-request-timeout = 450
operator-policy = 451
spr-connection-timeout = 452
mipha-dup-wimax-session = 453
invalid-version-attr = 454
sgsn-zone-code-failure = 455
invalid-qci = 456
no_rules = 457
sgsn-rnc-no-dual-pdp-init-deact = 458
mme-init-ctxt-setup-failure = 459
mme-driver-initiated = 460
mme-s1ap-connection-down = 461
mme-s1ap-reset-recd = 462
mme-s6a-response-timeout = 463
mme-s13-response-timeout = 464
mme-Illegal-equipment = 465
mme-unexpected-attach = 466
mme-sgw-selection-failure = 467
mme-pgw-selection-failure = 468
mme-reselection-to-sgsn = 469
mme-relocation-to-sgsn = 470
mme-reselection-to-mme = 471
mme-relocation-to-mme = 472
mme-tau-attach-collision = 473
mme-old-sgsn-resolution-failure = 474
mme-old-mme-resolution-failure = 475
mme-reloc-ho-notify-timeout = 476
mme-reloc-ho-req-ack-timeout = 477
mme-create-session-timeout = 478
mme-create-session-failure = 479
mme-s11-path-failure = 480
mme-policy-no-ue-irat = 481
mme-x2-handover-failed = 482
mme-attach-restrict = 483
mme-reloc-to-non-3GPP = 484
mme-no-response-from-ue = 485
mme-sgw-relocation-failed = 486
mme-implicit-detach = 487
sgsn-detach-notify = 488
emergency-inactivity-timeout = 489
policy-initiated-release = 490
gy-result-code-system-failure = 491
mme-zone-code-validation-failed = 492
sgsn-pgw-init-deact = 493
s6b-ip-validation-failed = 494
sgsn-failure-rsp-from-sgw = 495
tcp-remote-close = 496
tcp-reset-received = 497
tcp-socket-error = 498
ptmsi-signature-mismatch = 499
camel-invalid-configuration = 500
4Gto3G-context-replacement = 501
mme-isr-sgsn-init-detach = 502
sgsn-isr-addl-ptmsi-rai = 503
sgsn-sgw-dbr-cause-isr-deact = 504
sgsn-isr-mme-init-detach = 505
mme-sgw-dbr-cause-isr-deact = 506
sgsn-ptmsi-crunch = 507
3Gto4G-context-replacement = 508
mme-no-eps-bearers-activated = 509
intra-ggsn-handoff = 510
WSG-Auth-failed = 511
Gtp-non-existent-pdp-context = 512
sgsn-cancel-loc-inital-attach = 513
Local-fallback-timeout = 514
sgsn-nrspca-actv-rej-by-sgsn = 515
sgsn-nrspca-actv-rej-by-ms = 516
ims-authorization-config-delete = 517
sgsn-no-ptmsi-signature = 518
pgw-sel-dns-server-nt-reachable = 519
pgw-sel-dns-no-resource-records = 520
pgw-sel-dns-no-service-params = 521
ePDG-Auth-failed = 522
ePDG-pgw-sel-failure-initial = 523
ePDG-pgw-sel-failure-handoff = 524
sgsn-ho-sgw-reloc-collision = 525
ePDG-dbr-from-pgw = 526
ePDG-gtpc-abort-session = 527
ePDG-gtpu-abort-session = 528
ePDG-gtpu-error-ind = 529
ePDG-pgw-not-reachable = 530
ePDG-reject-from-pgw = 531
ipsg-session-replacement = 532
ePDG-rel-due-to-handoff = 533
mme-foreign-plmn-guti-rejected = 534
sgsn-dsd-allepswithdrawn = 535
NAT-Pool-BusyOut-Or-Pend-Delete = 536
Invalid-APN = 537
srvcc-ps-to-cs-handover = 538
henbgw-mme-s1ap-reset-recd = 539
henbgw-henb-s1ap-reset-recd = 540
henbgw-ue_sess-mme-conn-down = 541
henbgw-ue-sess-henb-conn-down = 542
henbgw-handoff-complete = 543
henbgw-handover-failed = 544
henbgw-mme-error-indication = 545
henbgw-henb-error-indication = 546
henbgw-henb-initiated-release = 547
henbgw-mme-initiated-release = 548
henbgw-duplicate-session = 549
Transport-mismatch-with-PGW = 550
icsr-ipsec-chkpt-failed = 551
sgsn-dbr-cause-isr-deact-detach = 552
unexpected-scenario = 553
icsr-delete-standby = 554
epdg-local-pgw-res-failed = 555
sgsn-iovui-negotiation-failure = 556
henbgw-gw2henb-inv-mmeues1apid = 557
henbgw-gw2mme-inv-mmeues1apid = 558
henbgw-henb-sess-henb-conn-down = 559
henbgw-nw-path-unavailable = 560
pgw-transaction-timeout = 561
samog-multi-dev-pgw-sel-failure = 562
samog-multi-dev-demux-failure = 563
mme-pgw-restarted = 564
samog-session-replacement = 565
authorization-failed = 566
mm-apn-congestion-control = 567
samog-pgw-init-detach = 568
samog-ggsn-init-detach = 569
samog-pgw-rejected = 570
samog-ggsn-rejected = 571
samog-pgw-no-response = 572
samog-ggsn-no-response = 573
samog-gtpc-path-failure = 574
samog-gtpu-path-failure = 575
samog-gtpu-err-ind = 576
samog-mandatory-ie-missing = 577
samog-mandatory-ie-incorrect = 578
samog-ip-alloc-failed = 579
samog-default-gw-not-found = 580
samog-dns-unreachable = 581
samog-dns-no-resource-records = 582
samog-dns-no-service-params = 583
samog-internal-error = 584
handoff-pcf-restriction = 585
graceful-cleanup-on-audit-fail = 586
ue-ctxt-normal-del-ntsr-ddn = 587
session-auto-delete = 588
mme-qos-pgw-upgrade-reject = 589
path-failure-s5 = 590
path-failure-s11 = 591
path-failure-s4 = 592
gtpu-path-failure-s5u = 593
gtpu-path-failure-s1u = 594
gtpu-path-failure-s4u = 595
gtpu-path-failure-s12u = 596
gtpu-err-ind-s5u = 597
gtpu-err-ind-s1u = 598
gtpu-err-ind-s4u = 599
gtpu-err-ind-s12u = 600
diameter-network-too-busy = 601
diameter-network-failure = 602
diameter-roaming-not-allowed = 603
diameter-rat-disallowed = 604
diameter-no-subscription = 605
pcc-data-mismatch = 606
mme-embms-call_setup-timeout = 607
mme-embms-normal-disconnect = 608
mme-embms-sctp-down = 609
disconnect-from-charging-server = 610
disconnect-irat-fail-hi-missing = 611
apn-not-supported-in-plmn-rat = 612
ue-pcscf-reselect-not-supported = 613
newer-session-detected = 614
mme-guti_realloc_failed-detach = 615
mme-pcscf-rest-detach = 616
Reject-ho-old-tun-path-failure = 617
gx-vapn-selection-failed = 618
dup-static-ipv6-addr-req = 619
mip-path-failure = 620
apn-congestion = 621
ue-redirected = 622
ePDG-s2b-access-denied = 623
ePDG-s2b-network-failure = 624
ePDG-s2b-msg-failure = 625
ePDG-s2b-rat-disallowed = 626
ePDG-roaming-mandatory = 627
gtpv2-peer-context-not-found = 628
SaMOG-access-switch-timeout = 629
decrypt-fail-count-exceeded = 630
emergency-idle-timeout = 631
gtpu-path-failure-s11u = 632
gtpu-err-ind-s11u = 633
mme-gtpu-path-failure-s11u = 634
mme-gtpu-err-ind-s11u = 635
ePDG-pcscf-restoration = 636
samog-lbo-user-logout = 637
sx-req-rej = 638
sx-cntxt-not-found = 639
sx-mand-ie-missing = 640
sx-cond-ie-missing = 641
sx-msg-invalid-length = 642
sx-mand-ie-incorrect = 643
sx-invld-fwd-policy = 644
sx-invld-fteid-alloc-opt = 645
sx-no-establshd-sx-association = 646
sx-no-response = 647
sx-no-resource = 648
sx-fteid-ipaddr-type-mismatch = 649
sx-invalid-response = 650
user-plane-info-not-available = 651
user-plane-info-mismatch = 652
ikev2-req-rate-exceeded = 653
mme-decor-call-rerouted = 654
mme-decor-call-rejected = 655
origin-state-id-change = 656
mme-ducon-path-update-failed = 657
diam-no-non-3gpp-subscription = 658
diameter-user-unknown = 659
diameter-illegal-equipment = 660
epdg-invalid-imei = 661
sx-path-failure = 662
sxfail-opr-revert-info = 663
sxfail-opr-get-usagereport = 664
sxfail-opr-create-rulebase-pdr = 665
sxfail-opr-remove-pdr = 666
gtp-remote-data-teid-invalid = 667
smp-fp-tep-oper-failure = 668
smp-fp-ambr-oper-failure = 669
smp-fp-brr-stream-oper-failure = 670
smp-fp-brr-strm-chrgng-op-fail = 671
smp-fp-itc-bw-oper-failure = 672
smp-fp-strm-chrg-oper-failure = 673
vpp-next-hop-failure = 674
graceful-cleanup-up-audit-fail = 675
sx-max-trans-threshold-reached = 676
sx-db-ub-collision = 677
sx-failure-ntsr = 678
graceful-term-up-self-protectn = 679

Length 4

Type 26

Vendor ID 8164

VSA Type 3

SN1-DNS-Proxy-Intercept-List

DNS proxy list.

Syntax String

Length 1-253

Type 26

Vendor ID 8164

VSA Type 214

SN1-DNS-Proxy-Use-Subscr-Addr

This attribute is used to convey whether to use the subscriber's address as the source address for DNS Proxy.

Syntax Enumerated Integer. Supports the following value(s):

Disable = 0
Enable = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 25

SN1-Dynamic-Addr-Alloc-Ind-Flag

This attribute indicates that the PDP address has been dramatically allocated for that particular PDP context. This field is missing if the address is static (e.g., part of the PDP context subscription). Dynamic address allocation might be relevant for charging (e.g., the duration of PDP context as one resource offered and possibly owned by the network operator).

Syntax Opaque Value

Length 1

Type 26

Vendor ID 8164

VSA Type 141

SN1-Ecs-Data-Volume

Compound attribute indicating downlink and uplink octet usage for a PDP context per rating group.

Type 26

Vendor ID 8164

VSA Type 176

Syntax Compound. Contains the following sub-attribute(s).

Rating-Group-ID

Rating-Group-ID for which the WiMAX PPAQ is allocated or reported.

Syntax Unsigned Integer

Length 4

Type 11

GPRS-Uplink

Uplink octet usage for a PDP context per rating group.

Syntax Unsigned Integer

Length 4

Type 2

GPRS-Downlink

Downlink octet usage for a PDP context per rating group.

Syntax Unsigned Integer

Length 4

Type 3

SN1-Enable-QoS-Renegotiation

This attribute configures the enabling of dynamic QoS renegotiation.

Syntax Enumerated Integer. Supports the following value(s):

No = 0
Yes = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 58

SN1-Firewall-Enabled

Firewall for subscriber enabled.

Syntax Enumerated Integer. Supports the following value(s):

False = 0
True = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 198

SN1-FMC-Location

MAC address and CDMA location information.

Syntax String

Length 1-247

Type 26

Vendor ID 8164

VSA Type 171

SN1-GGSN-MIP-Required

This attribute specifies if MIP is required for the GGSN subscriber.

Syntax Enumerated Integer. Supports the following value(s):

Disabled = 0
Enabled = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 68

SN1-Gratuitous-ARP-Aggressive

This attribute specifies whether to generate a gratuitous ARP message whenever a MIP handoff or re-registration occurs. A non-zero of this attribute also configures the mode of operation when sending the gratuitous ARP, although only one mode (Aggressive) is supported at this time.

Syntax Enumerated Integer. Supports the following value(s):

Disabled = 0
Enabled = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 54

SN1-GTP-Version

This attribute contains the version of GTP the subscriber is using.

Syntax Enumerated Integer. Supports the following value(s):

GTP_VERSION_0 = 0
GTP_VERSION_1 = 1
GTP_VERSION_2 = 2

Length 4

Type 26

Vendor ID 8164

VSA Type 62

SN1-HA-Send-DNS-Address

This attribute specifies if the HA should send the DNS address in the Mobile IP RRP message. The default is not to send the DSN Address.

Syntax Enumerated Integer. Supports the following value(s):

Disabled = 0
Enabled = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 47

SN1-Home-Behavior

This attribute specifies the configuration for the behavior bits settings for a home subscriber in an APN.

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 8164

VSA Type 119

SN1-Home-Profile

This attribute specifies the configuration for the profile bits settings for a home subscriber in an APN.

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 8164

VSA Type 109

SN1-Home-Sub-Use-GGSN

This attribute configures GGSN to accept GGSN's charging characteristics for home subscribers defined for the APN.

Syntax Enumerated Integer. Supports the following value(s):

Deny = 0
Accept = 1

Alloc_Local_Pool = 0
Alloc_Dhcp_Client = 1
Alloc_Radius = 2
Alloc_No_Alloc = 3
Alloc_Static_Alloc = 4
Alloc_Dhcp_Relay = 5

Length 4

Type 26

Vendor ID 8164

VSA Type 53

SN1-IP-Filter-In

This attribute is deprecated. To select an IP access list that is already defined in the destination context, use the IETF standard Filter-Id attribute. The filter ID is used to identify the IP access list by name.

Syntax String

Length 1-253

Type 26

Vendor ID 8164

VSA Type 10

SN1-IP-Filter-Out

This attribute is deprecated. To select an IP access list that is already defined in the destination context, use the IETF standard Filter-Id attribute. The filter ID is used to identify the IP access list by name.

Syntax String

Length 1-253

Type 26

Vendor ID 8164

VSA Type 11

SN1-IP-Header-Compression

Specifies the IP header compression method to use.

Syntax Enumerated Integer. Supports the following value(s):

None = 0
VJ = 1
ROHC = 2
VJ_ROHC = 3

Length 4

Type 26

Vendor ID 8164

VSA Type 150

SN1-IP-Hide-Service-Address

This attribute prevents the IP address bound to a call service from responding to ping and IMCP error packets.

Syntax Enumerated Integer. Supports the following value(s):

No = 0
Yes = 1

No = 0
Yes = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 14

SN1-IP-Source-Violate-No-Acct

This attribute excludes the Source Violated IP packets and byte counts when reporting the Octet and Packet count in an accounting message.

Syntax Enumerated Integer. Supports the following value(s):

Disabled = 0
Enabled = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 196

SN1-IP-Src-Valid-Drop-Limit

Maximum number of packet drops entertained before disconnecting the session for source violated packets for the session

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 8164

VSA Type 110

SN1-IPv6-DNS-Proxy

IPV6 DNS Proxy Enabled or Disabled Setting for the session.

Syntax Enumerated Integer. Supports the following value(s):

Disabled = 0
Enabled = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 126

SN1-IPv6-Egress-Filtering

This attribute enables egress filtering to make sure that packets being sent to the mobile device have an interface ID that matches that of the mobile device. This feature is meant to protect the Mobile from receiving unwanted packets from the Internet.

Syntax Enumerated Integer. Supports the following value(s):

Disabled = 0
Enabled = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 103

This attribute specifies the address allocation policy.

Syntax Enumerated Integer. Supports the following value(s):

no-local-alloc-validate = 0
local-alloc = 1
local-alloc-validate = 2

Length 4

Type 26

Vendor ID 8164

VSA Type 43

SN1-LI-Dest-Address

This attribute specifies the Authorized Destination-IP/Port to which LI packets could be forwarded.

Type 26

Vendor ID 8164

VSA Type 240

Syntax Compound. Contains the following sub-attribute(s).

Length 0-16

SN1-LI-Dest-IP

This attribute specifies the authorized Destination IP to which LI packets could be forwarded.

Syntax IPv4 Address

Length 4

Type 1

SN1-LI-Dest-Port

This attribute specifies the authorized Destination Port to which LI packets could be forwarded.

Syntax Unsigned Integer

Length 2

Type 2

SN1-Local-IP-Address

This attribute contains the IP address of the local interface on the chassis for the user's session.

Syntax IPv4 Address

Length 4

Type 26

Vendor ID 8164

VSA Type 13

SN1-Long-Duration-Action

This attribute specifies the action to take place when the long duration timeout expires for a subscriber session.

Syntax Enumerated Integer. Supports the following value(s):

Detection = 1
Disconnection = 2
Dormant-Only-Disconnection = 3
Dormant-Only-Detection = 4

Length 4

Type 26

Vendor ID 8164

VSA Type 45

SN1-Long-Duration-Notification

Long Duration Notification.

Syntax Enumerated Integer. Supports the following value(s):

Suppress = 0
Send = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 253

SN1-Long-Duration-Timeout

This attribute is used to detect and if necessary disconnect sessions connected to the PDSN. This attribute configures the time period before either alerting the administrator or disconnecting the subscriber.

Syntax Integer

Length 4

Type 26

Vendor ID 8164

VSA Type 44

SN1-Mediation-Acct-Rsp-Action

When this attribute is set to None, there is no action taken while waiting for a response for the accounting start message from the Mediation Accounting server. When this attribute is set to No-Early-PDUs the system buffers all packets from the user (uplink) until a response for the accounting start message is received from the Mediation Accounting server. When set to Delay_GTP_Response, the system does not send a GTP create PDP response to the GGSN until a response for the accounting start message is received from the Mediation Accounting server. If the attribute is not present in Access-Accept message or if the attribute value is invalid, the value "None" is assumed.

Syntax Enumerated Integer. Supports the following value(s):

None = 0
No_Early_PDUs = 1
Delay_GTP_Response = 2

Length 4

Type 26

Vendor ID 8164

VSA Type 105

SN1-Mediation-Enabled

This attribute indicates whether the Mediation Accounting configuration is enabled or disabled for GGSN.

Syntax Enumerated Integer. Supports the following value(s):

Disabled = 0
Enabled = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 123

SN1-Mediation-No-Interims

This attribute is used to disable or enable Mediation Interim Accounting Records for the session.

Syntax Enumerated Integer. Supports the following value(s):

Disabled = 0
Enabled = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 146

SN1-Mediation-VPN-Name

This attribute specifies the Mediation Context name for the session.

Syntax String

Length 1-128

Type 26

Vendor ID 8164

VSA Type 104

SN1-Min-Compress-Size

This attribute contains the minimum size (in octets) a data packet can have in order to be compressed.

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 8164

VSA Type 23

SN1-MIP-AAA-Assign-Addr

This attribute specifies if the PDSN/FA will allow AAA to assign the home address. The default is to not allow AAA to assign the home address.

Syntax Enumerated Integer. Supports the following value(s):

Disabled = 0
Enabled = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 50

SN1-MIP-ANCID

Accounting correlation ID created by IPGW, received by VBM and HBM.

Syntax Opaque Value

Length 12

Type 26

Vendor ID 8164

VSA Type 166

SN1-MIP-Dual-Anchor

Enable/disable dual-anchor service for a subscriber.

Syntax Enumerated Integer. Supports the following value(s):

Disabled = 0
Enabled = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 165

SN1-MIP-HA-Assignment-Table

MIP-HA Assignment Table name. When this is received in an Access-Accept message, the system uses this local table to get the HA Address.

Syntax String

Length 1-253

Type 26

Vendor ID 8164

VSA Type 154

SN1-MIP-Match-AAA-Assign-Addr

This attribute specifies if the PDSN/FA will enforce that a non-zero AAA-specified home address must match the home address present in the MIP RRQ from the mobile node, and disconnect the subscriber session if a match is not present. The default is not to force the addresses to match.

Syntax Enumerated Integer. Supports the following value(s):

Disabled = 0
Enabled = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 51

SN1-MIP-MIN-Reg-Lifetime-Realm

This attribute configures the minimum MIP registration lifetime for a subscriber/realm.

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 8164

VSA Type 12

SN1-MIP-Reg-Lifetime-Realm

Configure the maximum MIP registration lifetime for a subscriber/realm.

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 8164

VSA Type 175

SN1-MIP-Send-Ancid

AAA attribute to enable/disable sending ANCID from FA to HA in MIP RRQ.

Syntax Enumerated Integer. Supports the following value(s):

Disabled = 0
Enabled = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 163

SN1-MIP-Send-Correlation-Info

This attribute enables/disables sending of correlation-id from FA to HA in MIP RRQ.

Syntax Enumerated Integer. Supports the following value(s):

Disabled = 0
NVSE_Starent = 1
NVSE_CUstom1 = 2
NVSE_Custom2 = 3

Length 4

Type 26

Vendor ID 8164

VSA Type 188

SN1-MIP-Send-Imsi

Attribute to enable/disable sending IMSI from FA to HA in MIP RRQ.

Syntax Enumerated Integer. Supports the following value(s):

Disabled = 0
NVSE_Starent = 1
NVSE_Custom1 = 2
NVSE_Custom2 = 3

Length 4

Type 26

Vendor ID 8164

VSA Type 164

SN1-MIP-Send-Term-Verification

This attribute specifies whether the PDSN/FA should send the Terminal Verification Normal Vendor/Organization Specific Extension (NVSE) in the Mobile IP RRQ message to the HA. The default is not to send the Terminal Verification NVSE.

Syntax Enumerated Integer. Supports the following value(s):

Disabled = 0
NVSE_Custom1 = 1
NVSE_Custom2 = 2
NVSE_Starent = 3

Length 4

Type 26

Vendor ID 8164

VSA Type 48

SN1-MN-HA-Hash-Algorithm

This attribute contains the hash algorithm to use for MN-HA authentication.

Syntax Enumerated Integer. Supports the following value(s):

MD5 = 1
MD5-RFC2002 = 2
HMAC-MD5 = 3

Length 4

Type 26

Vendor ID 8164

VSA Type 99

SN1-MN-HA-Timestamp-Tolerance

This attribute contains the duration of timestamp tolerance, in seconds, to use for MN-HA authentication.

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 8164

VSA Type 30

SN1-MS-ISDN

SN1-MS-ISDN.

Syntax Opaque Value

Length 1-9

Type 26

Vendor ID 8164

VSA Type 248

SN1-NAI-Construction-Domain

This attribute specifies the domain name to use when constructing the NAI.

Syntax String

Length 1-247

Type 26

Vendor ID 8164

VSA Type 37

SN1-NAT-Bind-Record

This attribute contains the NAT Binding Record.

NAT-Record-Info.

Type 26

Vendor ID 8164

VSA Type 246

Syntax Compound. Contains the following sub-attribute(s).

Framed-IP-Address

Framed IP address.

Syntax IPv4 Address

Length 4

Type 1

NAT-IP-Address

NAT IP address.

Syntax IPv4 Address

Length 4

Type 2

NAT-Port-Block-Start

Start port of the port chunk

Syntax Unsigned Integer

Length 2

Type 3

NAT-Port-Block-End

End port of the port chunk.

Syntax Unsigned Integer

Length 2

Type 4

Acct-Session-Id

Accounting Session ID.

Syntax String

Length 1-17

Type 5

User-Name

User name.

Syntax String

Length 1-128

Type 6

Correlation-Id

Correlation ID.

Syntax String

Length 1-17

Type 7

Calling-Station-Id

This attribute indicates the MSISDN/Calling station ID.

Syntax String

Length 1-16

Type 8

3GPP-Charging-Id

This attribute specifies the 3GPP Charging Identifier.

Syntax Unsigned Integer

Length 4

Type 9

SN1-NAT-IP-Address-Old

Public IP address used for the call

Syntax IPv4 Address

Length 4

Type 26

Vendor ID 8164

VSA Type 0

SN1-NAT-IP-Address

This attribute includes the NAT (public) IP address used for the call.

Syntax IPv4 Address

Length 4

Type 26

Vendor ID 8164

VSA Type 217

SN1-NAT-Port

This attribute specifies the port used along with NAT-IP for N:1 case.

Syntax Unsigned Integer

Length 2

Type 26

Vendor ID 8164

VSA Type 179

SN1-NPU-Qos-Priority

This attribute configures Inter-Subscriber priority Queueing based on class of service offered. Gold has highest priority and Best_effort lowest priority. From DSCP, means the priority queueing will be done based on the DSCP marking the incoming subscriber packet carries.

Syntax Enumerated Integer. Supports the following value(s):

Best_Effort = 0
Bronze = 1
Silver = 2
Gold = 3
From_DSCP = 4

Length 4

Type 26

Vendor ID 8164

VSA Type 98

SN1-Ntk-Initiated-Ctx-Ind-Flag

This attribute indicates that the PDP context is network initiated. The attribute is missing for a mobile activated PDP context.

Syntax Opaque Value

Length 1

Type 26

Vendor ID 8164

VSA Type 142

SN1-Ntk-Session-Disconnect-Flag

SN1-Ntk-Session-Disconnect-Flag.

Syntax Enumerated Integer. Supports the following value(s):

Session-Disconnect = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 143

SN1-Nw-Reachability-Server-Name

This attribute specifies the name of a network reachability server (defined in the destination context of the subscriber) that must respond as reachable, or the user is be redirected.

Syntax String

Length 1-16

Type 26

Vendor ID 8164

VSA Type 65

SN1-Overload-Disc-Connect-Time

Provides the connect time for a session. When this time expires, the session may become a candidate for disconnection.

Syntax Uint32

Type 26

Vendor ID 8164

VSA Type 233

SN1-Overload-Disc-Inact-Time

Provides inactivity time for a session after which it may become candidate for disconnection.

Syntax Uint32

Type 26

Vendor ID 8164

VSA Type 234

SN1-Overload-Disconnect

Enables/disables the overload-disconnect feature (if 1) and disables if 0

Syntax Uint32

Type 26

Vendor ID 8164

VSA Type 235

SN1-PDIF-MIP-Release-TIA

PDIF mobile IP release TIA.

Syntax Enumerated Integer. Supports the following value(s):

No = 0
Yes = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 172

SN1-PDIF-MIP-Required

PDIF mobile IP required.

Syntax Enumerated Integer. Supports the following value(s):

No = 0
Yes = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 170

SN1-PDIF-MIP-Simple-IP-Fallback

PDIF mobile IP simple IP fallback.

Syntax Enumerated Integer. Supports the following value(s):

No = 0
Yes = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 173

SN1-PDSN-Correlation-Id

Correlation ID received from PDSN to HA.

Syntax Opaque Value

Length 8

Type 26

Vendor ID 8164

VSA Type 189

SN1-PDSN-Handoff-Req-IP-Addr

This attribute specifies if the PDSN should reject and terminate the subscriber session when the proposed address in IPCP by the mobile does not match the existing address in the PDSN. The default (Disabled) is not to reject these sessions.

Syntax Enumerated Integer. Supports the following value(s):

Disabled = 0
Enabled = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 46

SN1-PDSN-NAS-Id

NAS Identifier received from PDSN to HA.

Syntax String

Length 1-253

Type 26

Vendor ID 8164

VSA Type 190

SN1-PDSN-NAS-IP-Address

NAS IP address received from PDSN to HA.

Syntax IPv4 Address

Length 4

Type 26

Vendor ID 8164

VSA Type 191

SN1-Permit-User-Mcast-PDUs

Specifies whether or not to let the subscriber discard multicast PDUs.

Syntax Enumerated Integer. Supports the following value(s):

disabled = 0
enabled = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 134

SN1-PPP-Accept-Peer-v6Ifid

This attribute indicates the acceptance of the interface ID provided by peer during PPP IPv6CP if the ID is valid. The default is disabled.

Syntax Enumerated Integer. Supports the following value(s):

Disabled = 0
Enabled = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 95

SN1-PPP-Always-On-Vse

SN1-PPP-Always-On-Vse.

Syntax Enumerated Integer. Supports the following value(s):

Disabled = 0
Enabled = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 130

SN1-PPP-Data-Compression-Mode

This attribute indicates the PPP data compression mode to use for the PPP session when PPP data compression is used.

Syntax Enumerated Integer. Supports the following value(s):

Normal = 0
Stateless = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 19

SN1-PPP-Data-Compression

This attribute indicates the PPP data compression algorithm to use for the PPP session. The attribute value is a bit field, and many algorithms can be specified to indicate that one of these may be chosen by the user.

Syntax Enumerated Integer. Supports the following value(s):

None = 0
Stac-LZS = 1
MPPC = 2
Deflate = 4

Length 4

Type 26

Vendor ID 8164

VSA Type 9

SN1-PPP-Keepalive

This attribute indicates the interval for the PPP keepalive, in seconds.

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 8164

VSA Type 16

SN1-PPP-NW-Layer-IPv4

This attribute indicates the PPP IPCP negotiation for IPv4. The default is enabled.

Syntax Enumerated Integer. Supports the following value(s):

Disabled = 0
Enabled = 1
Passive = 2

Length 4

Type 26

Vendor ID 8164

VSA Type 92

SN1-PPP-NW-Layer-IPv6

This attribute indicates the PPP IPv6CP negotiation for IPv6. The default is enabled.

Syntax Enumerated Integer. Supports the following value(s):

Disabled = 0
Enabled = 1
Passive = 2

Length 4

Type 26

Vendor ID 8164

VSA Type 93

SN1-PPP-Outbound-Password

This attribute indicates the password to be used when the user side of the PPP connection requires authentication.

Syntax String

Length 1-253

Type 26

Vendor ID 8164

VSA Type 15

SN1-PPP-Outbound-Username

This attribute indicates the username to be used when the user side of the PPP connection requires authentication.

Syntax String

Length 1-253

Type 26

Vendor ID 8164

VSA Type 61

SN1-PPP-Progress-Code

This attribute provides information about the "state" of the PPP connection, when the connection was terminated.

Syntax Enumerated Integer. Supports the following value(s):

Not-Defined = 0
Call-Lcp-Down = 10
Call-Disconnecting = 20
Call-Ppp-Renegotiating = 30
Call-Arrived = 40
Call-Pdg-Tcp-Connecting = 45
Call-Pdg-Ssl-Connecting = 46
Call-Lcp-Up = 50
Call-Authenticating = 60
Call-Bcmcs-Authenticating = 70
Call-Authenticated = 80
Call-Tunnel-Connecting = 85
Call-Ipcp-Up = 90
Call-Imsa-Authorizing = 95
Call-Imsa-Authorized = 97
Call-MBMS-UE-Authorizing = 98
Call-MBMS-Bearer-Authorizing = 99
Call-Simple-IP-Connected = 100
Call-Mobile-IP-Connected = 110
Call-Tunnel-Connected = 115
Call-Pdp-Type-IP-Connected = 120
Call-Pdp-Type-IPv6-Connected = 125
Call-Pdp-Type-PPP-Connected = 130
Call-GTP-Connecting = 131
Call-GTP-Connected = 132
Call-Proxy-Mobile-IP-Connected = 140
Call-Pdg-Ssl-Connected = 141
Call-Pdg-Connected = 142
Call-Ipsg-Connected = 145
Call-Bcmcs-Connected = 150
Call-MBMS-UE-Connected = 155
Call-MBMS-Bearer-Connected = 156
Call-Pending-Addr-From-DHCP = 160
Call-Got-Addr-From-DHCP = 170
Call-HA-IPSEC-Tunnel-Connecting = 180
Call-HA-IPSEC-Connected = 190
Call-ASN-Non-Anchor-Connected = 200
Call-ASNPC-Connected = 210 Call-Mobile-IPv6-Connected = 220
Call-PMIPv6-Connected = 221
Call-PHSPC-Connected = 230
Call-GTP-IPv4-Connected = 235
Call-GTP-IPv6-Connected = 236
Call-GTP-IPv4-IPv6-Connected = 237
Call-SGW-Connected = 245
Call-MME-Attached = 246
Call-Auth-Only-Connected = 247

Length 4

Type 26

Vendor ID 8164

VSA Type 4

SN1-PPP-Reneg-Disc

PPP remote reneg disconnect policy.

Type 26

Syntax Enumerated Integer. Supports the following value(s):

Never = 0
Always = 1
NAI_Prefix_MSID_Mismatch = 2

Length 4

Vendor ID 8164

VSA Type 187

SN1-Prepaid-Compressed-Count

This attribute indicates if a Pre-paid subscriber's byte usage should be counted on the basis of compressed or uncompressed byte data over the subscriber's PPP connection to the system. If not present, the default is to count uncompressed byte data.

Syntax Enumerated Integer. Supports the following value(s):

Uncompressed = 0
Compressed = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 31

SN1-Prepaid-Final-Duration-Alg

For prepaid, final duration is calculated based on the algorithm specified by the value of this attribute.

Syntax Enumerated Integer. Supports the following value(s):

current_time = 0
last-user-layer3-activity-time = 1
last-airlink-activity-time = 2
last-airlink-activity-time-last-reported = 3

Length 4

Type 26

Vendor ID 8164

VSA Type 135

SN1-Prepaid-Inbound-Octets

In an Access-Accept, this indicates how many additional inbound (bytes delivered to the subscriber) byte credits should be granted to the subscriber. In an Accounting- Request, this indicates how many total inbound byte credits have been granted to the subscriber. When this attribute is not present in the Access-Accept, then pre-paid usage checking is disabled on an inbound octet basis.

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 8164

VSA Type 32

SN1-Prepaid-Outbound-Octets

SN1-Prepaid-Outbound-Octets.

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 8164

VSA Type 33

SN1-Prepaid-Preference

This attribute specifies whether prepaid is volume based or duration based.

Syntax Enumerated Integer. Supports the following value(s):

prepaid_duration = 0
prepaid_volume = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 129

SN1-Prepaid-Profile

Do not do prepaid, regardless of the Rulebase configuration.

Type 26

Syntax Enumerated Integer. Supports the following value(s):

Use-Rulebase-Config = 0
Prohibit = 1

Length 4

Vendor ID 8164

VSA Type 155

SN1-Prepaid-Timeout

This attribute indicates how much time may elapse before a new request for more pre-paid credits is issued. If the specified time has elapsed since the prior grant of credits was received from the RADIUS server, then a new request for credits is issued. This attribute is primarily used to periodically update the subscriber of new credits issued since the subscriber was connected. Note that credit requests will still be made on behalf of the subscriber when the subscriber drops down to the low watermark of credits (or zero if there is no low watermark). The presence or absence of this attribute does not affect that mechanism in any way. However, this timer is re-set whenever any grant of credits is received on behalf of the subscriber, regardless of why the grant of credits was requested.

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 8164

VSA Type 35

SN1-Prepaid

Prepaid.

Syntax Enumerated Integer. Supports the following value(s):

no_prepaid = 0
custom_prepaid = 1
standard_prepaid = 2
wimax_prepaid = 4

Disabled = 0
Enabled = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 52

SN1-QoS-Background-Class

This attribute defines the QOS Background Traffic Class.

Syntax Opaque Value

Length 28

Type 26

Vendor ID 8164

VSA Type 91

SN1-QoS-Class-Background-PHB

Syntax Enumerated Integer. Supports the following value(s):

Best-Effort = 0
Pass-Through = 1
AF11 = 10
AF12 = 12
AF13 = 14
AF21 = 18
AF22 = 20
AF23 = 22
AF31 = 26
AF32 = 28
AF33 = 30
AF41 = 34
AF42 = 36
AF43 = 38
EF = 46

Length 4

Type 26

Vendor ID 10415

VSA Type 113

SN1-QoS-Class-Converstional-PHB

SN1-QoS-Class-Converstional-PHB.

Syntax Enumerated Integer. Supports the following value(s):

Best-Effort = 0
Pass-Through = 1
AF11 = 10
AF12 = 12
AF13 = 14
AF21 = 18
AF22 = 20
AF23 = 22
AF31 = 26
AF32 = 28
AF33 = 30
AF41 = 34
AF42 = 36
AF43 = 38
EF = 46

Length 4

Type 26

Vendor ID 10415

VSA Type 111

SN1-QoS-Class-Interactive-1-PHB

Syntax Enumerated Integer. Supports the following value(s):

Best-Effort = 0
Pass-Through = 1
AF11 = 10
AF12 = 12
AF13 = 14
AF21 = 18
AF22 = 20
AF23 = 22
AF31 = 26
AF32 = 28
AF33 = 30
AF41 = 34
AF42 = 36
AF43 = 38
EF = 46

Length 4

Type 26

Vendor ID 10415

VSA Type 114

SN1-QoS-Class-Interactive-2-PHB

Syntax Enumerated Integer. Supports the following value(s):

Best-Effort = 0
Pass-Through = 1
AF11 = 10
AF12 = 12
AF13 = 14
AF21 = 18
AF22 = 20
AF23 = 22
AF31 = 26
AF32 = 28
AF33 = 30
AF41 = 34
AF42 = 36
AF43 = 38
EF = 46

Length 4

Type 26

Vendor ID 10415

VSA Type 115

SN1-QoS-Class-Interactive-3-PHB

Syntax Enumerated Integer. Supports the following value(s):

Best-Effort = 0
Pass-Through = 1
AF11 = 10
AF12 = 12
AF13 = 14
AF21 = 18
AF22 = 20
AF23 = 22
AF31 = 26
AF32 = 28
AF33 = 30
AF41 = 34
AF42 = 36
AF43 = 38
EF = 46

Length 4

Type 26

Vendor ID 10415

VSA Type 116

SN1-QoS-Class-Streaming-PHB

Syntax Enumerated Integer. Supports the following value(s):

Best-Effort = 0
Pass-Through = 1
AF11 = 10
AF12 = 12
AF13 = 14
AF21 = 18
AF22 = 20
AF23 = 22
AF31 = 26
AF32 = 28
AF33 = 30
AF41 = 34
AF42 = 36
AF43 = 38
EF = 46

Disabled = 0
Policing = 1
Shaping = 2

Length 4

Type 26

Vendor ID 8164

VSA Type 73

SN1-QoS-Tp-Uplk

This attribute enables/disables Traffic Policing/Shaping in uplink direction.

Syntax Enumerated Integer. Supports the following value(s):

Disabled = 0
Policing = 1
Shaping = 2

Length 4

Type 26

Vendor ID 8164

VSA Type 79

SN1-QoS-Traffic-Policy

This compound attribute simplifies sending QoS values for Traffic Class, Direction, Burst-Size, Committed-Data-Rate, Peak-Data-Rate, Exceed-Action, and Violate-Action from the RADIUS server. When the SN1-QoS-Traffic-Policy attribute is sent along with the Acct-Session-ID attribute, the system matches the particular PtDP context, and applies the new policy and retains the policy with the subscriber profile for future use. The next time the system sends a CoA request with a new policy and a different Acct-Session-ID for the same subscriber, the previously received policy is also applied to the matching PDP context along with the new policy.

VSA Type 162

SN1-Radius-Returned-Username

This attribute is used to prefer RADIUS returned user name over constructed username in the accounting messages.

Type 26

Syntax Enumerated Integer. Supports the following value(s):

No = 0
Yes = 1

Length 4

Vendor ID 8164

VSA Type 236

SN1-Re-CHAP-Interval

The Periodic CHAP authentication interval for PPP, in seconds.

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 8164

VSA Type 7

SN1-Roaming-Behavior

This attribute specifies the configuration for the behavior bits settings for a roaming subscriber in an APN.

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 8164

VSA Type 121

SN1-Roaming-Profile

This attribute specifies the configuration for the profile bits settings for a roaming subscriber in an APN.

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 8164

VSA Type 118

SN1-Roaming-Status

This attribute specifies if the user is in roaming network for HA/LNS calls.

Syntax Enumerated Integer. Supports the following value(s):

HOME = 0
ROAMING = 1

Length 1

Type 26

Vendor ID 8164

VSA Type 244

SN1-Roaming-Sub-Use-GGSN

This attribute configures GGSN to accept GGSN's charging characteristics for roaming subscribers defined for the APN.

Syntax Enumerated Integer. Supports the following value(s):

Deny = 0
Accept = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 108

SN1-ROHC-Direction

Specifies in which direction to apply Robust Header Compression (ROHC).

Syntax Enumerated Integer. Supports the following value(s):

Any = 0
Uplink = 1
Downlink = 2

Length 4

Type 26

Vendor ID 8164

VSA Type 153

SN1-ROHC-Flow-Marking-Mode

Configure ROHC compression for marked flows only.

Type 26

Syntax Enumerated Integer. Supports the following value(s):

False = 0
True = 1

Length 4

Vendor ID 8164

VSA Type 195

SN1-ROHC-Mode

Sets the mode of operation for Robust Header Compression for IP.

Syntax Enumerated Integer. Supports the following value(s):

Reliable = 0
Optimistic = 1
Unidirectional = 2

None = 0
PDSN = 1
Management = 2
HA = 3
GGSN = 4
LNS = 5
IPSG = 6
CSCF = 7
ASNGW = 8
PDIF = 9
STANDALONE_FA = 10
SGSN = 11
PHSGW = 12
EPDG = 13
MIPV6HA = 14
PGW = 15
SGW = 16
FNG = 17
MSEG = 18
HNBGW = 19
BNG = 20
WSG = 21
SAMOG = 22

Length 4

Type 26

Vendor ID 8164

VSA Type 24

SN1-Simultaneous-SIP-MIP

This attribute indicates if a PDSN Subscriber can simultaneously be given Simple IP and Mobile IP service.

Syntax Enumerated Integer. Supports the following value(s):

Disabled = 0
Enabled = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 22

SN1-Subs-Acc-Flow-Traffic-Valid

This attribute indicates the subscriber account flow traffic is valid.

Type 26

Syntax Enumerated Integer. Supports the following value(s):

Disable = 0
Enable = 1

Length 4

Vendor ID 8164

VSA Type 225

SN1-Subscriber-Accounting

This attribute specifically enables or disables subscriber accounting. Note that if enabled, subscriber accounting still needs to be enabled in the subscriber's AAA context for accounting to be performed.

Syntax Enumerated Integer. Supports the following value(s):

None = 0
Radius = 1
GTPP = 2

Length 4

Type 26

Vendor ID 8164

VSA Type 64

SN1-Subscriber-Acct-Interim

This attribute specifies if accounting INTERIM messages are enabled for the subscriber. Note that accounting must also be globally enabled for the subscriber (SN-Subscriber-Accounting), and enabled for the subscriber's AAA context (along with a specific INTERIM interval), if accounting INTERIM messages are to be sent.

Syntax Enumerated Integer. Supports the following value(s):

Normal = 0
Suppress = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 70

SN1-Subscriber-Acct-Mode

Syntax Enumerated Integer. Supports the following value(s):

flow-based-auxilliary = 0
flow-based-all = 1
flow-based-none = 2
session-based = 3
main-a10-only = 4

Length 4

Type 26

Vendor ID 8164

VSA Type 192

SN1-Subscriber-Acct-Rsp-Action

When this attribute is set to None, there is no action taken while waiting for a response for the accounting start message from the RADIUS server. When this attribute is set to No-Early-PDUs the system buffers all packets from the user (uplink) until a response for the accounting start message is received from the RADIUS server. When set to Delay_GTP_Response, the system does not send a GTP create response to the GGSN until a response for the accounting start message is received from the RADIUS server.

Syntax Enumerated Integer. Supports the following value(s):

None = 0
No_Early_PDUs = 1
Delay_GTP_Response = 2

Length 4

Type 26

Vendor ID 8164

VSA Type 100

SN1-Subscriber-Acct-Start

This attribute specifies if accounting START messages are enabled for the subscriber. Note that accounting must also be globally enabled for the subscriber (SN-Subscriber-Accounting), and enabled for the subscriber's AAA context, if accounting START messages are to be sent.

Syntax Enumerated Integer. Supports the following value(s):

Normal = 0
Suppress = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 69

SN1-Subscriber-Acct-Stop

This attribute specifies if accounting STOP messages are enabled for the subscriber. Note that accounting must also be globally enabled for the subscriber (SN-Subscriber-Accounting), and enabled for the subscriber's AAA context, if accounting STOP messages are to be sent.

Syntax Enumerated Integer. Supports the following value(s):

Normal = 0
Suppress = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 71

SN1-Subscriber-Class

Customer-requested attribute for supporting specific behavior for their subscriber billing.

Syntax Enumerated Integer. Supports the following value(s):

Normal_Subscriber = 0
Ting_100 = 1
Ting_500 = 2
Ting_Buddy = 3
Ting_Star = 4
Ting_Nolimit_SMS = 5
Kids_Locator = 6
Ting_2000 = 7
Handicapped_Welfare = 8
Reserved = 9

Length 4

Type 26

Vendor ID 8164

VSA Type 219

SN1-Subscriber-Dormant-Activity

This attribute specifies whether to treat dormant packets routed to the mobile as activity for idle timeout purposes. The default is Enabled. Disabled means dormant packets routed to the mobile are not treated as activity for idle timeout purposes.

Syntax Enumerated Integer. Supports the following value(s):

Disabled = 0
Enabled = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 66

SN1-Subscriber-IP-Hdr-Neg-Mode

This attribute specifies whether to wait for (detect) IP header compression to be requested by the mobile before responding, or not to wait (force). Force is the default.

Syntax Enumerated Integer. Supports the following value(s):

Force = 0
Detect = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 67

SN1-Subscriber-IP-TOS-Copy

This attribute enables copying of TOS bits from outer IP headers into inner tunneled IP headers. The default is Both.

Syntax Enumerated Integer. Supports the following value(s):

None = 0
Access-Tunnel = 1
Data-Tunnel = 2
Both = 3

Length 4

Type 26

Vendor ID 8164

VSA Type 85

SN1-Subscriber-Nexthop-Address

This attribute specifies the nexthop gateway address to be returned by AAA on a per subscriber basis.

Syntax IPv4 Address

Length 4

Type 26

Vendor ID 8164

VSA Type 127

SN1-Subscriber-No-Interims

This is a GGSN specific attribute. When set to 0 (disabled) interim accounting is generated. When set to 1 (enabled) interim accounting generation is disabled.

Syntax Enumerated Integer. Supports the following value(s):

Disabled = 0
Enabled = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 133

SN1-Subscriber-Permission

This attribute indicates the services allowed to be delivered to the subscriber. The attribute value is a bit field, and many algorithms can be specified to indicate that one of these may be chosen by the user.

Syntax Enumerated Integer. Supports the following value(s):

None = 0
Simple-IP = 1
Mobile-IP = 2
Simple-IP-Mobile-IP = 3
HA-Mobile-IP = 4
Simple-IP-HA-Mobile-IP = 5
Mobile-IP-HA-Mobile-IP = 6
SIP-MIP-HA-MIP = 7
GGSN-PDP-TYPE-IP = 0x08
GGSN-PDP-TYPE-PPP = 0x10
Network-Mobility = 0x20
FA-HA-NEMO = 0x26
Pmipv6-interception = 0x40
HA-Mobile-Pmipv6 = 0x44
FA-HA-Mobile-Pmipv6 = 0x46
All = 0x7F

Length 4

Type 26

Vendor ID 8164

VSA Type 20

SN1-Subscriber-Template-Name

RADIUS returned subscriber template.

Type 26

Syntax String

Length 1-127

Vendor ID 8164

VSA Type 158

SN1-Subs-IMSA-Service-Name

IMS Authorization Service name.

Type 26

Syntax String

Length 1-128

Vendor ID 8164

VSA Type 159

SN1-Subs-VJ-Slotid-Cmp-Neg-Mode

Enable/Disable slotid compression in either direction when using VJ compression.

Type 26

Syntax Enumerated Integer. Supports the following value(s):

None = 0
Receive = 1
Transmit = 2
Both = 3

Length 4

Vendor ID 8164

VSA Type 221

SN1-Tp-Dnlk-Burst-Size

This attribute specifies the Traffic Policing downlink burst size in bytes.

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 8164

VSA Type 76

SN1-Tp-Dnlk-Committed-Data-Rate

This attribute specifies the Traffic Policing downlink committed data rate in bps.

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 8164

VSA Type 74

SN1-Tp-Dnlk-Exceed-Action

This attribute specifies the action to take on Traffic Policing downlink packets that exceed the committed-data-rate but do not violate the peak-data-rate.

Syntax Enumerated Integer. Supports the following value(s):

Transmit = 0
Drop = 1
Lower-IP-Precedence = 2
Buffer = 3
Transmit-On-Buffer-Full = 4

Length 4

Type 26

Vendor ID 8164

VSA Type 77

SN1-Tp-Dnlk-Peak-Data-Rate

This attribute specifies the Traffic Policing downlink peak data rate in bps.

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 8164

VSA Type 75

SN1-Tp-Dnlk-Violate-Action

This attribute specifies the action to take on Traffic Policing downlink packets that exceed both the committed-data-rate and the peak-data-rate.

Syntax Enumerated Integer. Supports the following value(s):

Transmit = 0
Drop = 1
Lower-IP-Precedence = 2
Buffer = 3
Transmit-On-Buffer-Full = 4

Length 4

Type 26

Vendor ID 8164

VSA Type 78

SN1-Tp-Uplk-Burst-Size

This attribute specifies the Traffic Policing uplink burst size in bytes.

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 8164

VSA Type 82

SN1-Tp-Uplk-Committed-Data-Rate

This attribute specifies the Traffic Policing uplink committed data rate in bps.

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 8164

VSA Type 80

SN1-Tp-Uplk-Exceed-Action

This attribute specifies the action to take on Traffic Policing uplink packets that exceed the committed-data-rate but do not violate the peak-data-rate.

Syntax Enumerated Integer. Supports the following value(s):

Transmit = 0
Drop = 1
Lower-IP-Precedence = 2
Buffer = 3
Transmit-On-Buffer-Full = 4

Length 4

Type 26

Vendor ID 8164

VSA Type 83

SN1-Tp-Uplk-Peak-Data-Rate

This attribute specifies the Traffic Policing uplink peak data rate in bps.

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 8164

VSA Type 81

SN1-Tp-Uplk-Violate-Action

This attribute specifies the action to take on Traffic Policing uplink packets that exceed both the committed-data-rate and the peak-data-rate.

Syntax Enumerated Integer. Supports the following value(s):

Transmit = 0
Drop = 1
Lower-IP-Precedence = 2
Buffer = 3
Transmit-On-Buffer-Full = 4

Length 4

Type 26

Vendor ID 8164

VSA Type 84

SN1-Traffic-Group

This attribute is used to assign a tag to an FA or a group of FAs, so that traffic policy can be enforced based on the tag value.

Syntax Unsigned Integer

Length 2

Type 26

Vendor ID 8164

VSA Type 161

SN1-Transparent-Data

This attribute is used by RADIUS to provide Global Title information for the GGSN to use in CDRs and Quota Auth.

Syntax Opaque Value

Length 1-247

Type 26

Vendor ID 8164

VSA Type 247

SN1-Tun-Addr-Policy

Describes IP address validation policy for non L2TP tunneled calls.

Syntax Enumerated Integer. Supports the following value(s):

no-local-alloc-validate = 0
local-alloc = 1
local-alloc-validate = 2

Length 4

Type 26

Vendor ID 8164

VSA Type 156

SN1-Tunnel-Gn

Used to enable/disable Gn interface from PDG/TTG to GGSN.

Syntax Enumerated Integer. Supports the following value(s):

Disabled = 0
Enabled = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 174

SN1-Tunnel-ISAKMP-Crypto-Map

This attribute specifies the system-defined crypto map to use for the subscriber's Mobile-IP connection, when IPSec is used to protect the Mobile-IP connection. This attribute is salt-encrypted.

Syntax String

Length 1-128

Type 26

Vendor ID 8164

VSA Type 38

SN1-Tunnel-ISAKMP-Secret

This attribute specifies the secret to use for IKE.

Syntax String

Length 1-128

Type 26

Vendor ID 8164

VSA Type 39

SN1-Tunnel-Load-Balancing

Specifies the load-balancing algorithm to use when tunneling is employed.

Syntax Enumerated Integer. Supports the following value(s):

random = 1
balanced = 2
prioritized = 3

Deny = 0
Accept = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 201

SN-Access-link-IP-Frag

This attribute specifies what to do when data received for the subscriber on the Access link that needs to be fragmented and the DF bit is either set or unset. The default is Normal.

Syntax Enumerated Integer. Supports the following value(s):

Normal = 0
DF-Ignore = 1
DF-Fragment-ICMP-Notify = 2

Length 4

Type 26

Vendor ID 8164

VSA Type 72

SN-Admin-Permission

This attribute indicates the services allowed to be delivered to the administrative user. The attribute value is a bit field, and many algorithms can be specified to indicate that one of these may be chosen by the user.

Syntax Enumerated Integer. Supports the following value(s):

None = 0
CLI = 1
FTP = 2
CLI-FTP = 3
Intercept = 4
CLI-Intercept = 5
CLI-Intercept-FTP = 7
ECS = 8
CLI-ECS = 9
CLI-FTP-ECS = 11
CLI-Intercept-ECS = 13
CLI-Intercept-FTP-ECS = 15 NoCons = 16
CLI-NoCons = 17
FTP-NoCons = 18
CLI-FTP-NoCons = 19
Intercept-NoCons = 20
CLI-Intercept-NoCons = 21
CLI-Intercept-FTP-NoCons = 23
ECS-NoCons = 24
CLI-ECS-NoCons = 25
CLI-FTP-ECS-NoCons = 27
CLI-Intercept-ECS-NoCons = 29
CLI-Intercept-FTP-ECS-NoCons = 31

Length 4

Type 26

Vendor ID 8164

VSA Type 21

SNA-Input-Gigawords

This attribute contains the total number of input gigawords.

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 8164

VSA Type 206

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 8164

VSA Type 202

SNA-PPP-Unfr-data-In-Oct

This attribute contains the total number of PPP octets without framing sent for the user's session.

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 8164

VSA Type 200

This attribute contains the authorized QoS.

Syntax Authorised-Qos

Type 26

Vendor ID 8164

VSA Type 266

SN-Bandwidth-Policy

This attribute contains the Traffic Policy value.

Syntax String

Length 1-63

Type 26

Vendor ID 8164

VSA Type 300

SN-Call-Id

This attribute contains the Call ID.

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 8164

VSA Type 251

SN-Cause-Code

This attribute includes the termination cause code value from IMS node.

Syntax Enumerated Integer. Supports the following value(s):

Normal_End_Of_Session = 0
Successful_Transaction = 1
End_Of_Subscriber_Dialog = 2
3XX_Redirection = 3
4XX_Request_Failure = 4
5XX_Server_Failure = 5
6XX_Global_Failure = 6
Unspecified_Error = 7
Unsuccessful_Session_Setup = 8
Internal_Error = 9

Length 4

Type 26

Vendor ID 8164

VSA Type 267

SN-Cause-For-Rec-Closing

This attribute contains the GGSN Specific Record Closing Reason Value.

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 8164

VSA Type 139

SN-CBB-Policy

This attribute contains the CBB policy name.

Syntax String

Length 1-63

Type 26

Vendor ID 8164

VSA Type 302

SN-CF-Call-International

This attribute contains enable/disable config for CF call restriction and dialing permission for international calls.

Syntax Enumerated Integer. Supports the following value(s):

Disable = 0
Enable = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 293

SN-CF-Call-Local

This attribute contains enable/disable config for CF call restriction and dialing permission for local calls.

Syntax Enumerated Integer. Supports the following value(s):

Disable = 0
Enable = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 291

SN-CF-Call-LongDistance

This attribute contains enable/disable config for CF call restriction and dialing permission for long distance calls.

Syntax Enumerated Integer. Supports the following value(s):

Disable = 0
Enable = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 292

SN-CF-Call-Premium

This attribute contains enable/disable config for CF call restriction and dialing permission for premium calls.

Syntax Enumerated Integer. Supports the following value(s):

Disable = 0
Enable = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 294

SN-CF-Call-RoamingInternatnl

This attribute contains enable/disable config for CSCF call restriction and dialing permission - Roaming International call.

Syntax Enumerated Integer. Supports the following value(s):

Disable = 0
Enable = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 298

SN-CF-Call-Transfer

This attribute contains enable/disable config for CSCF call feature - call transfer.

Syntax Enumerated Integer. Supports the following value(s):

Disable = 0
Enable = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 285

SN-CF-Call-Waiting

This attribute contains enable/disable config for CSCF call feature - call waiting.

Syntax Enumerated Integer. Supports the following value(s):

Disable = 0
Enable = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 284

SN-CF-CId-Display-Blocked

This attribute contains enable/disable config for CSCF call feature - caller ID display blocked.

Syntax Enumerated Integer. Supports the following value(s):

Disable = 0
Enable = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 283

SN-CF-CId-Display

This attribute contains enable/disable config for CSCF call feature - caller ID display.

Syntax Enumerated Integer. Supports the following value(s):

Disable = 0
Enable = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 220

SN-Change-Condition

The change condition that triggered this record for a GGSN session.

Syntax Enumerated Integer. Supports the following value(s):

QOSCHANGE = 0
TARIFFTIMECHANGE = 1
SGSNCHANGE = 500

Length 4

Type 26

Vendor ID 8164

VSA Type 140

SN-Charging-VPN-Name

The Charging Context Name for GGSN sessions.

Syntax String

Length 1-252

Type 26

Vendor ID 8164

VSA Type 137

This is a compound attribute and contains information about application servers.

Type 26

Vendor ID 8164

VSA Type 275

Syntax Compound. Contains the following sub-attribute(s).

App-Server

Holds URL of the application server.

Syntax String

Length 1-128

Type 1

AS-Called-Party-Address

Holds the called party addresses determined by the application server.

Syntax String

Length 1-128

Type 2

SN-CSCF-Rf-SDP-Media-Components

This is a compound attribute for IMS SDP media components.

Type 26

Vendor ID 8164

VSA Type 273

Syntax Compound. Contains the following sub-attribute(s).

Media-Name

Name of the media as available in the SDP data.

Syntax String

Length 0-128

Type 1

Media-Description

Holds the attributes of the media as available in the SDP data.

Syntax SDP-Media-Description

Type 2

Authorised-QoS

Holds the 3GPP Authorised QoS string.

Syntax String

Length 0-128

Type 3

3GPP-Charging-Id

This attribute specifies the 3GPP Charging Identifier.

Syntax String

Length 0-253

Type 4

Access-Network-Charging-Identifier-Value

Holds the access network charging identifier value.

Syntax Opaque Value

Length 1-256

Type 5

SN-Cscf-Subscriber-Ip-Address

This attribute contains the IP address of subscriber, used for early IMS authentication procedures.

Syntax IPv4 Address

Length 4

Type 26

Vendor ID 8164

VSA Type 287

SN-Customer-ID

This attribute contains the internal Customer-ID.

Syntax Opaque Value

Length 1-32

Type 26

Vendor ID 8164

VSA Type 325

SN-Data-Tunnel-Ignore-DF-Bit

This attribute specifies if the PDSN/FA or HA should ignore the DF bit in the IPv4 header when encapsulating the IPv4 packet in MIP, and therefore fragmenting the resulting tunneled packet if necessary. The default is not to ignore the DF bit.

Syntax Enumerated Integer. Supports the following value(s):

Disabled = 0
Enabled = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 49

SN-DHCP-Lease-Expiry-Policy

This attribute specifies whether to renew or disconnect on expiry of IP address lease time.

Type 26

Syntax Enumerated Integer. Supports the following value(s):

auto-renew = 0
disconnect = 1

Length 4

Vendor ID 8164

VSA Type 157

SN-DHCP-Options

Specific information to be sent from the DHCP server to the client.

Syntax Opaque Value

Length 1-245

Type 26

Vendor ID 8164

VSA Type 309

SN-Direction

ROHC protocol control that specifies in which direction to enable Robust Header Compression (ROHC).

Syntax Enumerated Integer. Supports the following value(s):

Any = 0
Uplink = 1
Downlink = 2

Length 4

Type 26

Vendor ID 8164

VSA Type 153

SN-Disconnect-Reason

This attribute indicates the reason the user was disconnected from service.

Syntax Enumerated Integer. Supports the following value(s):

Not-Defined = 0
Admin-Disconnect = 1
Remote-Disconnect = 2
Local-Disconnect = 3
Disc-No-Resource = 4
Disc-Excd-Service-Limit = 5
PPP-LCP-Neg-Failed = 6
PPP-LCP-No-Response = 7
PPP-LCP-Loopback = 8
PPP-LCP-Max-Retry = 9
PPP-Echo-Failed = 10
PPP-Auth-Failed = 11
PPP-Auth-Failed-No-AAA-Resp = 12
PPP-Auth-No-Response = 13
PPP-Auth-Max-Retry = 14
Invalid-AAA-Attr = 15
Failed-User-Filter = 16
Failed-Provide-Service = 17
Invalid-IP-Address-AAA = 18
Invalid-IP-Pool-AAA = 19
PPP-IPCP-Neg-Failed = 20
PPP-IPCP-No-Response = 21
PPP-IPCP-Max-Retry = 22
PPP-No-Rem-IP-Address = 23
Inactivity-Timeout = 24
Session-Timeout = 25
Max-Data-Excd = 26
Invalid-IP-Source-Address = 27
MSID-Auth-Failed = 28
MSID-Auth-Failed-No-AAA-Resp = 29
A11-Max-Retry = 30
A11-Lifetime-Expired = 31
A11-Message-Integrity-Failure = 32
PPP-lcp-remote-disc = 33
Session-setup-timeout = 34
PPP-keepalive-failure = 35
Flow-add-failed = 36
Call-type-detection-failed = 37
Wrong-ipcp-params = 38
MIP-remote-dereg = 39
MIP-lifetime-expiry = 40
MIP-proto-error = 41
MIP-auth-failure = 42
MIP-reg-timeout = 43
Invalid-dest-context = 44
Source-context-removed = 45
Destination-context-removed = 46
Req-service-addr-unavailable = 47
Demux-mgr-failed = 48
Internal-error = 49
AAA-context-removed = 50
invalid-service-type = 51
mip-relay-req-failed = 52
mip-rcvd-relay-failure = 53
ppp-restart-inter-pdsn-handoff = 54
gre-key-mismatch = 55
invalid_tunnel_context = 56
no_peer_lns_address = 57
failed_tunnel_connect = 58
l2tp-tunnel-disconnect-remote = 59
l2tp-tunnel-timeout = 60
l2tp-protocol-error-remote = 61
l2tp-protocol-error-local = 62
l2tp-auth-failed-remote = 63
l2tp-auth-failed-local = 64
l2tp-try-another-lns-from-remote = 65
l2tp-no-resource-local = 66
l2tp-no-resource-remote = 67
l2tp-tunnel-disconnect-local = 68
l2tp-admin-disconnect_remote = 69
l2tpmgr-reached-max-capacity = 70
MIP-reg-revocation = 71
path-failure = 72
dhcp-relay-ip-validation-failed = 73
gtp-unknown-pdp-addr-or-pdp-type = 74
gtp-all-dynamic-pdp-addr-occupied = 75
gtp-no-memory-is-available = 76
dhcp-relay-static-ip-addr-not-allowed = 77
dhcp-no-ip-addr-allocated = 78
dhcp-ip-addr-allocation-tmr-exp = 79
dhcp-ip-validation-failed = 80
dhcp-static-addr-not-allowed = 81
dhcp-ip-addr-not-available-at-present = 82
dhcp-lease-expired = 83
lpool-ip-validation-failed = 84
lpool-static-ip-addr-not-allowed = 85
static-ip-validation-failed = 86
static-ip-addr-not-present = 87
static-ip-addr-not-allowed = 88
radius-ip-validation-failed = 89
radius-ip-addr-not-provided = 90
invalid-ip-addr-from-sgsn = 91
no-more-sessions-in-aaa = 92
ggsn-aaa-auth-req-failed = 93
conflict-in-ip-addr-assignment = 94
apn-removed = 95
credits-used-bytes-in = 96
credits-used-bytes-out = 97
credits-used-bytes-total = 98
prepaid-failed = 99
l2tp-ipsec-tunnel-failure = 100
l2tp-ipsec-tunnel-disconnected = 101
mip-ipsec-sa-inactive = 102
Long-Duration-Timeout = 103
proxy-mip-registration-failure = 104
proxy-mip-binding-update = 105
proxy-mip-inter-pdsn-handoff-require-ip-address = 106
proxy-mip-inter-pdsn-handoff-mismatched-address = 107
Local-purge = 108
failed-update-handoff = 109
closed_rp-handoff-complete = 110
closed_rp-duplicate-session = 111
closed_rp-handoff-session-not-found = 112
closed_rp-handoff-failed = 113
pcf-monitor-keep-alive-failed = 114
call-internal-reject = 115
call-restarted = 116
a11-mn-ha-auth-failure = 117
a11-badly-formed = 118
a11-t-bit-not-set = 119
a11-unsupported-vendor-id = 120
a11-mismatched-id = 121
mipha-dup-home-addr-req = 122
mipha-dup-imsi-session = 123
ha-unreachable = 124
IPSP-addr-in-use = 125
mipfa-dup-home-addr-req = 126
mipha-ip-pool-busyout = 127
inter-pdsn-handoff = 128
active-to-dormant = 129
ppp-renegotiation = 130
active-start-param-change = 131
tarrif-boundary = 132
a11-disconnect-no-active-stop = 133
nw-reachability-failed-reject = 134
nw-reachability-failed-redirect = 135
container-max-exceeded = 136
static-addr-not-allowed-in-apn = 137
static-addr-required-by-radius = 138
static-addr-not-allowed-by-radius = 139
mip-registration-dropped = 140
counter-rollover = 141
constructed-nai-auth-fail = 142
inter-pdsn-service-optimize-handoff-disabled = 143
gre-key-collision = 144
inter-pdsn-service-optimize-handoff-triggered = 145
intra-pdsn-handoff-triggered = 146
delayed-abort-timer-expired = 147
Admin-AAA-disconnect = 148
Admin-AAA-disconnect-handoff = 149
PPP-IPV6CP-Neg-Failed = 150
PPP-IPV6CP-No-Response = 151
PPP-IPV6CP-Max-Retry = 152
PPP-Restart-Invalid-source-IPV4-address = 153
a11-disconnect-handoff-no-active-stop = 154
call-restarted-inter-pdsn-handoff = 155
call-restarted-ppp-termination = 156
mipfa-resource-conflict = 157
failed-auth-with-charging-svc = 158
mipha-dup-imsi-session-purge = 159
mipha-rev-pending-newcall = 160
volume-quota-reached = 161
duration-quota-reached = 162
gtp-user-authentication-failed = 163
MIP-reg-revocation-no-lcp-term = 164
MIP-private-ip-no-rev-tunnel = 165
Invalid-Prepaid-AAA-attr-in-auth-response = 166
mipha-prepaid-reset-dynamic-newcall = 167
gre-flow-control-timeout = 168
mip-paaa-bc-query-not-found = 169
mipha-dynamic-ip-addr-not-available = 170
a11-mismatched-id-on-handoff = 171
a11-badly-formed-on-handoff = 172
a11-unsupported-vendor-id-on-handoff = 173
a11-t-bit-not-set-on-handoff = 174
MIP-reg-revocation-i-bit-on = 175
A11-RRQ-Deny-Max-Count = 176
Dormant-Transition-During-Session-Setup = 177
PPP-Rem-Reneg-Disc-Always-Cfg = 178
PPP-Rem-Reneg-Disc-NAI-MSID-Mismatch = 179
mipha-subscriber-ipsec-tunnel-down = 180
mipha-subscriber-ipsec-tunnel-failed = 181
mipha-subscriber-ipsecmgr-death = 182
flow-is-deactivated = 183
ecsv2-license-exceeded = 184
IPSG-Auth-Failed = 185
driver-initiated = 186
ims-authorization-failed = 187
service-instance-released = 188
flow-released = 189
ppp-renego-no-ha-addr = 190
intra-pdsn-handoff = 191
overload-disconnect = 192
css-service-not-found = 193
Auth-Failed = 194
dhcp-client-sent-release = 195
dhcp-client-sent-nak = 196
msid-dhcp-chaddr-mismatch = 197
link-broken = 198
prog-end-timeout = 199
qos-update-wait-timeout = 200
css-synch-cause = 201
Gtp-context-replacement = 202
PDIF-Auth-failed = 203
l2tp-unknown-apn = 204
ms-unexpected-network-reentry = 205
r6-invalid-nai = 206
eap-max-retry-reached = 207
vbm-hoa-session-disconnected = 208
vbm-voa-session-disconnected = 209
in-acl-disconnect-on-violation = 210
eap-msk-lifetime-expiry = 211
eap-msk-lifetime-too-low = 212
mipfa-inter-tech-handoff = 213
r6-max-retry-reached = 214
r6-nwexit-recd = 215
r6-dereg-req-recd = 216
r6-remote-failure = 217
r6r4-protocol-errors = 218
wimax-qos-invalid-aaa-attr = 219
npu-gre-flows-not-available = 220
r4-max-retry-reached = 221
r4-nwexit-recd = 222
r4-dereg-req-recd = 223
r4-remote-failure = 224
ims-authorization-revoked = 225
ims-authorization-released = 226
ims-auth-decision-invalid = 227
mac-addr-validation-failed = 228
excessive-wimax-pd-flows-cfgd = 229
sgsn-canc-loc-sub = 230
sgsn-canc-loc-upd = 231
sgsn-mnr-exp = 232
sgsn-ident-fail = 233
sgsn-sec-fail = 234
sgsn-auth-fail = 235
sgsn-glu-fail = 236
sgsn-imp-det = 237
sgsn-smgr-purge = 238
sgsn-subs-handed-to-peer = 239
sgsn-dns-fail-inter-rau = 240
sgsn-cont-rsp-fail = 241
sgsn-hlr-not-found-for-imsi = 242
sgsn-ms-init-det = 243
sgsn-opr-policy-fail = 244
sgsn-duplicate-context = 245
hss-profile-update-failed = 246
sgsn-no-pdp-activated = 247
asnpc-idle-mode-timeout = 248
asnpc-idle-mode-exit = 249
asnpc-idle-mode-auth-failed = 250
asngw-invalid-qos-configuration = 251
sgsn-dsd-allgprswithdrawn = 252
r6-pmk-key-change-failure = 253
sgsn-illegal-me = 254
sess-termination-timeout = 255
sgsn-sai-fail = 256
sgsn-rnc-removal = 257
sgsn-rai-removal = 258
sgsn-init-deact = 259
ggsn-init-deact = 260
hlr-init-deact = 261
ms-init-deact = 262
sgsn-detach-init-deact = 263
sgsn-rab-rel-init-deact = 264
sgsn-iu-rel-init-deact = 265
sgsn-gtpu-path-failure = 266
sgsn-gtpc-path-failure = 267
sgsn-local-handoff-init-deact = 268
sgsn-remote-handoff-init-deact = 269
sgsn-gtp-no-resource = 270
sgsn-rnc-no-resource = 271
sgsn-odb-init-deact = 272
sgsn-invalid-ti = 273
sgsn-actv-rejected-due-to-rnc = 274
sgsn-apn-restrict-vio = 275
sgsn-actv-rejected-by-sgsn = 276
sgsn-abnormal-deact = 277
sgsn-actv-rejected-by-ggsn = 278
sgsn-err-ind = 279
asngw-non-anchor-prohibited = 280
asngw-im-entry-prohibited = 281
session-idle-mode-entry-timeout = 282
session-idle-mode-exit-timeout = 283
asnpc-ms-power-down-nwexit = 284
asnpc-r4-nwexit-recd = 285
sgsn-iu-rel-before-call-est = 286
ikev2-subscriber-ipsecmgr-death = 287
All-dynamic-pool-addr-occupied = 288
mip6ha-ip-addr-not-available = 289
bs-monitor-keep-alive-failed = 290
sgsn-att-in-reg-state = 291
sgsn-inbound-srns-in-reg-state = 292
dt-ggsn-tun-reestablish-failed = 293
sgsn-unknown-pdp = 294
sgsn-pdp-auth-failure = 295
sgsn-duplicate-pdp-context = 296
sgsn-no-rsp-from-ggsn = 297
sgsn-failure-rsp-from-ggsn = 298
sgsn-apn-unknown = 299
sgsn-pdp-status-mismatch = 300
sgsn-attach-on-attch-init-abort = 301
sgsn-iu-rel-in-israu-init-abort = 302
sgsn-smgr-init-abort = 303
sgsn-mm-ctx-cleanup-init-abort = 304
sgsn-unknown-abort = 305
sgsn-guard-timeout-abort = 306
vpn-bounce-dhcpip-validate-req = 307
mipv6-id-mismatch = 308
aaa-session-id-not-found = 309
x1-max-retry-reached = 310
x1-nwexit-recd = 311
x1-dereg-req-recd = 312
x1-remote-failure = 313
x1x2-protocol-errors = 314
x2-max-retry-reached = 315
x2-nwexit-recd = 316
x2-dereg-req-recd = 317
x2-remote-failure = 318
x1-pmk-key-change-failure = 319
sa-rekeying-failure = 320
sess-sleep-mode-entry-timeout = 321
phsgw-non-anchor-prohibited = 322
asnpc-pc-relocation-failed = 323
asnpc-pc-relocation = 324
auth_policy_mismatch = 325
sa-lifetime-expiry = 326
asnpc-del-ms-entry-recd = 327
phspc-sleep-mode-timeout = 328
phspc-sleep-mode-exit = 329
phspc-sleep-mode-auth-failed = 330
phspc-ms-power-down-nwexit = 331
phspc-x2-nwexit-recd = 332
invalid-nat-config = 333
asngw-tid-entry-not-found = 334
No-NAT-IP-Address = 335
excessive-phs-pd-flows-cfgd = 336
phsgw-invalid-qos-configuration = 337
Interim-Update = 338
sgsn-attach-abrt-rad-lost = 339
sgsn-inbnd-irau-abrt-rad-lost = 340
ike-keepalive-failed = 341
sgsn-attach-abrt-ms-suspend = 342
sgsn-inbnd-irau-abrt-ms-suspend = 343
duplicate-session-detected = 344
sgsn-xid-response-failure = 345
sgsn-nse-cleanup = 346
sgsn-gtp-req-failure = 347
sgsn-imsi-mismatch = 348
sgsn-bvc-blocked = 349
sgsn-attach-on-inbound-irau = 350
sgsn-attach-on-outbound-irau = 351
sgsn-incorrect-state = 352
sgsn-t3350-expiry = 353
sgsn-page-timer-expiry = 354
phsgw-tid-entry-not-found = 355
phspc-del-ms-entry-recd = 356
sgsn-pdp-local-purge = 357
phs-invalid-nai = 358
session-sleep-mode-exit-timeout = 359
sgsn-offload-phase2 = 360
phs-thirdparty-auth-fail = 361
remote-error-notify = 362
no-response = 363
PDG-Auth-failed = 364
mme-s1AP-send-failed = 365
mme-egtpc-connection-failed = 366
mme-egtpc-create-session-failed = 367
mme-authentication-failure = 368
mme-ue-detach = 369
mme-mme-detach = 370
mme-hss-detach = 371
mme-pgw-detach = 372
mme-sub-validation-failure = 373
mme-hss-connection-failure = 374
mme-hss-user-unknown = 375
dhcp-lease-mismatch-detected = 376
nemo-link-layer-down = 377
eapol-max-retry-reached = 378
sgsn-offload-phase3 = 379
mbms-bearer-service-disconnect = 380
disconnect-on-violation-odb = 381
disconn-on-violation-focs-odb = 382
CSCF-REG-Admin-disconnect = 383
CSCF-REG-User-disconnect = 384
CSCF-REG-Inactivity-timeout = 385
CSCF-REG-Network-disconnect = 386
CSCF-Call-Admin-disconnect = 387
CSCF-CAll-User-disconnect = 388
CSCF-CALL-Local-disconnect = 389
CSCF-CALL-No-Resource = 390
CSCF-CALL-No-Respone = 391
CSCF-CALL-Inactivity-timeout = 392
CSCF-CALL-Media-Auth-Failure = 393
CSCF-REG-No-Resource = 394
ms-unexpected-idle-mode-entry = 395
re-auth-failed = 396
sgsn-pdp-nse-cleanup = 397
sgsn-mm-ctxt-gtp-no-resource = 398
unknown-apn = 399
gtpc-path-failure = 400
gtpu-path-failure = 401
actv-rejected-by-sgsn = 402
sgsn-pdp-gprs-camel-release = 403
sgsn-check-imei-failure = 404
sgsn-sndcp-init-deact = 405
sgsn-pdp-inactivity-timeout = 406
sfw-policy-removed-mid-session = 407
FNG-Auth-failed = 408
ha-stale-key-disconnect = 409
No-IPV6-address-for-subscriber = 410
prefix-registration-failure = 411
disconnect-from-policy-server = 412
s6b-auth-failed = 413
gtpc-err-ind = 414
gtpu-err-ind = 415
invalid-pdn-type = 416
aaa-auth-req-failed = 417
apn-denied-no-subscription = 418
Sgw-context-replacement = 419
dup-static-ip-addr-req = 420
apn-restrict-violation = 421
invalid-wapn = 422
ttg-nsapi-allocation-failed = 423
mandatory-gtp-ie-missing = 424
aaa-unreachable = 425
asngw-service-flow-deletion = 426
CT-PMIP-RRQ-NVSE-Value-Change = 427
tcp-read-failed = 428
tcp-write-failed = 429
ssl-handshake-failed = 430
ssl-renegotiate-failed = 431
ssl-bad-message = 432
ssl-alert-received = 433
ssl-disconnect = 434
ssl-migration = 435
sgsn-ard-failure = 436
sgsn-camel-release = 437
sgsn-egtpc-connection-failed = 438
sgsn-egtpc-create-sess-failed = 439
sgsn-hss-detach = 440
sgsn-hss-connection-failure = 441
sgsn-pgw-detach = 442
sgsn-s5-s8-no-support-for-apn = 443
sgsn-no-rab-for-gbr-bearer = 444
sgsn-sgw-selection-failure = 445
sgsn-pgw-selection-failure = 446
Hotlining-Status-Change = 447
ggsn-no-rsp-from-sgsn = 448
diameter-protocol-error = 449
diameter-request-timeout = 450
operator-policy = 451
spr-connection-timeout = 452
mipha-dup-wimax-session = 453
invalid-version-attr = 454
sgsn-zone-code-failure = 455
invalid-qci = 456
no_rules = 457
sgsn-rnc-no-dual-pdp-init-deact = 458
mme-init-ctxt-setup-failure = 459
mme-driver-initiated = 460
mme-s1ap-connection-down = 461
mme-s1ap-reset-recd = 462
mme-s6a-response-timeout = 463
mme-s13-response-timeout = 464
mme-Illegal-equipment = 465
mme-unexpected-attach = 466
mme-sgw-selection-failure = 467
mme-pgw-selection-failure = 468
mme-reselection-to-sgsn = 469
mme-relocation-to-sgsn = 470
mme-reselection-to-mme = 471
mme-relocation-to-mme = 472
mme-tau-attach-collision = 473
mme-old-sgsn-resolution-failure = 474
mme-old-mme-resolution-failure = 475
mme-reloc-ho-notify-timeout = 476
mme-reloc-ho-req-ack-timeout = 477
mme-create-session-timeout = 478
mme-create-session-failure = 479
mme-s11-path-failure = 480
mme-policy-no-ue-irat = 481
mme-x2-handover-failed = 482
mme-attach-restrict = 483
mme-reloc-to-non-3GPP = 484
mme-no-response-from-ue = 485
mme-sgw-relocation-failed = 486
mme-implicit-detach = 487
sgsn-detach-notify = 488
emergency-inactivity-timeout = 489
policy-initiated-release = 490
gy-result-code-system-failure = 491
mme-zone-code-validation-failed = 492
sgsn-pgw-init-deact = 493
s6b-ip-validation-failed = 494
sgsn-failure-rsp-from-sgw = 495
tcp-remote-close = 496
tcp-reset-received = 497
tcp-socket-error = 498
ptmsi-signature-mismatch = 499
camel-invalid-configuration = 500
4Gto3G-context-replacement = 501
mme-isr-sgsn-init-detach = 502
sgsn-isr-addl-ptmsi-rai = 503
sgsn-sgw-dbr-cause-isr-deact = 504
sgsn-isr-mme-init-detach = 505
mme-sgw-dbr-cause-isr-deact = 506
sgsn-ptmsi-crunch = 507
3Gto4G-context-replacement = 508
mme-no-eps-bearers-activated = 509
intra-ggsn-handoff = 510
WSG-Auth-failed = 511
Gtp-non-existent-pdp-context = 512
sgsn-cancel-loc-inital-attach = 513
Local-fallback-timeout = 514
sgsn-nrspca-actv-rej-by-sgsn = 515
sgsn-nrspca-actv-rej-by-ms = 516
ims-authorization-config-delete = 517
sgsn-no-ptmsi-signature = 518
pgw-sel-dns-server-nt-reachable = 519
pgw-sel-dns-no-resource-records = 520
pgw-sel-dns-no-service-params = 521
ePDG-Auth-failed = 522
ePDG-pgw-sel-failure-initial = 523
ePDG-pgw-sel-failure-handoff = 524
sgsn-ho-sgw-reloc-collision = 525
ePDG-dbr-from-pgw = 526
ePDG-gtpc-abort-session = 527
ePDG-gtpu-abort-session = 528
ePDG-gtpu-error-ind = 529
ePDG-pgw-not-reachable = 530
ePDG-reject-from-pgw = 531
ipsg-session-replacement = 532
ePDG-rel-due-to-handoff = 533
mme-foreign-plmn-guti-rejected = 534
sgsn-dsd-allepswithdrawn = 535
NAT-Pool-BusyOut-Or-Pend-Delete = 536
Invalid-APN = 537
srvcc-ps-to-cs-handover = 538
henbgw-mme-s1ap-reset-recd = 539
henbgw-henb-s1ap-reset-recd = 540
henbgw-ue_sess-mme-conn-down = 541
henbgw-ue-sess-henb-conn-down = 542
henbgw-handoff-complete = 543
henbgw-handover-failed = 544
henbgw-mme-error-indication = 545
henbgw-henb-error-indication = 546
henbgw-henb-initiated-release = 547
henbgw-mme-initiated-release = 548
henbgw-duplicate-session = 549
Transport-mismatch-with-PGW = 550
icsr-ipsec-chkpt-failed = 551
sgsn-dbr-cause-isr-deact-detach = 552
unexpected-scenario = 553
icsr-delete-standby = 554
epdg-local-pgw-res-failed = 555
sgsn-iovui-negotiation-failure = 556
henbgw-gw2henb-inv-mmeues1apid = 557
henbgw-gw2mme-inv-mmeues1apid = 558
henbgw-henb-sess-henb-conn-down = 559
henbgw-nw-path-unavailable = 560
pgw-transaction-timeout = 561
samog-multi-dev-pgw-sel-failure = 562
samog-multi-dev-demux-failure = 563
mme-pgw-restarted = 564
samog-session-replacement = 565
authorization-failed = 566
mm-apn-congestion-control = 567
samog-pgw-init-detach = 568
samog-ggsn-init-detach = 569
samog-pgw-rejected = 570
samog-ggsn-rejected = 571
samog-pgw-no-response = 572
samog-ggsn-no-response = 573
samog-gtpc-path-failure = 574
samog-gtpu-path-failure = 575
samog-gtpu-err-ind = 576
samog-mandatory-ie-missing = 577
samog-mandatory-ie-incorrect = 578
samog-ip-alloc-failed = 579
samog-default-gw-not-found = 580
samog-dns-unreachable = 581
samog-dns-no-resource-records = 582
samog-dns-no-service-params = 583
samog-internal-error = 584
handoff-pcf-restriction = 585
graceful-cleanup-on-audit-fail = 586
ue-ctxt-normal-del-ntsr-ddn = 587
session-auto-delete = 588
mme-qos-pgw-upgrade-reject = 589
path-failure-s5 = 590
path-failure-s11 = 591
path-failure-s4 = 592
gtpu-path-failure-s5u = 593
gtpu-path-failure-s1u = 594
gtpu-path-failure-s4u = 595
gtpu-path-failure-s12u = 596
gtpu-err-ind-s5u = 597
gtpu-err-ind-s1u = 598
gtpu-err-ind-s4u = 599
gtpu-err-ind-s12u = 600
diameter-network-too-busy = 601
diameter-network-failure = 602
diameter-roaming-not-allowed = 603
diameter-rat-disallowed = 604
diameter-no-subscription = 605
pcc-data-mismatch = 606
mme-embms-call_setup-timeout = 607
mme-embms-normal-disconnect = 608
mme-embms-sctp-down = 609
disconnect-from-charging-server = 610
disconnect-irat-fail-hi-missing = 611
apn-not-supported-in-plmn-rat = 612
ue-pcscf-reselect-not-supported = 613
newer-session-detected = 614
mme-guti_realloc_failed-detach = 615
mme-pcscf-rest-detach = 616
Reject-ho-old-tun-path-failure = 617
gx-vapn-selection-failed = 618
dup-static-ipv6-addr-req = 619
mip-path-failure = 620
apn-congestion = 621
ue-redirected = 622
ePDG-s2b-access-denied = 623
ePDG-s2b-network-failure = 624
ePDG-s2b-msg-failure = 625
ePDG-s2b-rat-disallowed = 626
ePDG-roaming-mandatory = 627
gtpv2-peer-context-not-found = 628
SaMOG-access-switch-timeout = 629
decrypt-fail-count-exceeded = 630
emergency-idle-timeout = 631
gtpu-path-failure-s11u = 632
gtpu-err-ind-s11u = 633
mme-gtpu-path-failure-s11u = 634
mme-gtpu-err-ind-s11u = 635
ePDG-pcscf-restoration = 636
samog-lbo-user-logout = 637
sx-req-rej = 638
sx-cntxt-not-found = 639
sx-mand-ie-missing = 640
sx-cond-ie-missing = 641
sx-msg-invalid-length = 642
sx-mand-ie-incorrect = 643
sx-invld-fwd-policy = 644
sx-invld-fteid-alloc-opt = 645
sx-no-establshd-sx-association = 646
sx-no-response = 647
sx-no-resource = 648
sx-fteid-ipaddr-type-mismatch = 649
sx-invalid-response = 650
user-plane-info-not-available = 651
user-plane-info-mismatch = 652
ikev2-req-rate-exceeded = 653
mme-decor-call-rerouted = 654
mme-decor-call-rejected = 655
origin-state-id-change = 656
mme-ducon-path-update-failed = 657
diam-no-non-3gpp-subscription = 658
diameter-user-unknown = 659
diameter-illegal-equipment = 660
epdg-invalid-imei = 661
sx-path-failure = 662
sxfail-opr-revert-info = 663
sxfail-opr-get-usagereport = 664
sxfail-opr-create-rulebase-pdr = 665
sxfail-opr-remove-pdr = 666
gtp-remote-data-teid-invalid = 667
smp-fp-tep-oper-failure = 668
smp-fp-ambr-oper-failure = 669
smp-fp-brr-stream-oper-failure = 670
smp-fp-brr-strm-chrgng-op-fail = 671
smp-fp-itc-bw-oper-failure = 672
smp-fp-strm-chrg-oper-failure = 673
vpp-next-hop-failure = 674
graceful-cleanup-up-audit-fail = 675
sx-max-trans-threshold-reached = 676
sx-db-ub-collision = 677
sx-failure-ntsr = 678
graceful-term-up-self-protectn = 679

Length 4

Type 26

Vendor ID 8164

VSA Type 3

SN-DNS-Proxy-Intercept-List

This attribute is used to specify the list name which contains the rules to intercept and redirect DNS requires received from mobile. This attribute can be configured using either local subscriber template or returned from Access-Accept.

Syntax String

Length 1-253

Type 26

Vendor ID 8164

VSA Type 214

SN-DNS-Proxy-Use-Subscr-Addr

This attribute is used to convey whether to use the subscriber's address as the source address for DNS Proxy.

Syntax Enumerated Integer. Supports the following value(s):

Disable = 0
Enable = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 25

SN-Dynamic-Addr-Alloc-Ind-Flag

This attribute indicates whether the IP address is allocated statically or dynamically from SGW perspective.

Syntax Opaque Value

Length 1

Type 26

Vendor ID 8164

VSA Type 141

SN-Ecs-Data-Volume

Compound attribute indicating downlink and uplink octet usage for a PDP context per rating group.

Type 26

Vendor ID 8164

VSA Type 176

Syntax Compound. Contains the following sub-attribute(s).

Rating-Group-Id

Rating Group Id in a PDP context.

Syntax Unsigned Integer

Length 4

Type 1

GPRS-Uplink

Uplink octet usage for a PDP context per rating group.

Syntax Unsigned Integer

Length 4

Type 2

GPRS-Downlink

Downlink octet usage for a PDP context per rating group.

Syntax Unsigned Integer

Length 4

Type 3

SN-Enable-QoS-Renegotiation

This attribute configures the enabling of dynamic QoS renegotiation.

Syntax Enumerated Integer. Supports the following value(s):

No = 0
Yes = 1

Length 1-128

Type 26

Vendor ID 8164

VSA Type 304

SN-Firewall-Enabled

Firewall for subscriber enabled.

Syntax Enumerated Integer. Supports the following value(s):

False = 0
True = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 198

SN-Firewall-Policy

This attribute contains the firewall policy name.

Syntax String

Length 1-63

Type 26

Vendor ID 8164

VSA Type 239

SN-FMC-Location

This attribute contains the MAC address and CDMA location information.

Syntax String

Length 1-247

Type 26

Vendor ID 8164

VSA Type 171

SN-GGSN-Address

The control plane IP address of the GGSN that handles one or more media component(s) of an IMS session.

Syntax IPv4 Address

Length 4

Type 26

Vendor ID 8164

VSA Type 264

SN-GGSN-MIP-Required

This attribute specifies if MIP is required for the GGSN subscriber.

Syntax Enumerated Integer. Supports the following value(s):

Disabled = 0
Enabled = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 68

SN-Gratuitous-ARP-Aggressive

This attribute specifies whether to generate a gratuitous ARP message whenever a MIP handoff or re-registration occurs. A non-zero of this attribute also configures the mode of operation when sending the gratuitous ARP, although only one mode (Aggressive) is supported at this time.

Syntax Enumerated Integer. Supports the following value(s):

Disabled = 0
Enabled = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 54

SN-GTP-Version

This attribute indicates the version of GTP the subscriber is using.

Syntax Enumerated Integer. Supports the following value(s):

GTP_VERSION_0 = 0
GTP_VERSION_1 = 1
GTP_VERSION_2 = 2

Length 4

Type 26

Vendor ID 8164

VSA Type 62

SN-Handoff-Indicator

This attribute indicates whether the Accounting Interim is sent because of the interim or not.

Syntax Enumerated Integer. Supports the following value(s):

Active-Handoff = 0
Location-Update = 1

Length 1

Type 26

Vendor ID 8164

VSA Type 310

SN-HA-Send-DNS-Address

Syntax Enumerated Integer. Supports the following value(s):

Disabled = 0
Enabled = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 47

SN-Home-Behavior

This attribute specifies the configuration for the behavior bits settings for a home subscriber in an APN.

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 8164

VSA Type 119

SN-Home-Profile

This attribute specifies the configuration for the profile bits settings for a home subscriber in an APN.

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 8164

VSA Type 109

SN-Home-Sub-Use-GGSN

This attribute configures GGSN to accept GGSN's charging characteristics for home subscribers defined for the APN.

Syntax Enumerated Integer. Supports the following value(s):

Deny = 0
Accept = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 106

Syntax Opaque Value

Length 1-8

Type 26

Vendor ID 8164

VSA Type 252

SN-Inactivity-Time

This attribute contains the inactivity time duration for a subscriber session under long time duration timer configuration.

Syntax Integer

Length 4

Type 26

Vendor ID 8164

VSA Type 232

SN-Internal-SM-Index

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 8164

VSA Type 122

SN-IP-Alloc-Method

This attribute specifies the method for allocating an IP address. This feature only applies to the GGSN service.

Syntax Enumerated Integer. Supports the following value(s):

Alloc_Local_Pool = 0
Alloc_Dhcp_Client = 1
Alloc_Radius = 2
Alloc_No_Alloc = 3
Alloc_Static_Alloc = 4
Alloc_Dhcp_Relay = 5

Length 4

Type 26

Vendor ID 8164

VSA Type 53

SN-IP-Filter-In

This attribute specifies the IP input filter rules to determine whether the traffic should undergo DPI processing.

Syntax String

Length 1-253

Type 26

Vendor ID 8164

VSA Type 10

SN-IP-Filter-Out

This attribute specifies the IP output filter rules to determine whether the traffic should undergo DPI processing.

Syntax String

Length 1-253

Type 26

Vendor ID 8164

VSA Type 11

SN-IP-Header-Compression

Specifies the IP header compression method to use.

Syntax Enumerated Integer. Supports the following value(s):

None = 0
VJ = 1
ROHC = 2
VJ_ROHC = 3

Length 4

Type 26

Vendor ID 8164

VSA Type 150

SN-IP-Hide-Service-Address

This attribute prevents subscribers from using traceroute to discover the public domain network addresses configured on HA and other services on the system.

Syntax Enumerated Integer. Supports the following value(s):

No = 0
Yes = 1

No = 0
Yes = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 14

SN-IP-Source-Violate-No-Acct

This attribute excludes the Source Violated IP packets and byte counts when reporting the Octet and Packet count in an accounting message.

Syntax Enumerated Integer. Supports the following value(s):

Disabled = 0
Enabled = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 196

SN-IP-Src-Validation-Drop-Limit

Maximum number of packet drops entertained before disconnecting the session for source violated packets for the session.

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 8164

VSA Type 110

SN-IPv6-Alloc-Method

This attribute specifies the method for allocating an IPv6 address. This feature only applies to the GGSN service.

Syntax Enumerated Integer. Supports the following value(s):

Alloc_Local_Pool = 0
Alloc_Dhcp_Client = 1
Alloc_No_Alloc = 2
Alloc_Static_Alloc = 3

Length 1

Type 26

Vendor ID 8164

VSA Type 314

SN-IPv6-DNS-Proxy

IPV6 DNS proxy enabled or disabled setting for the session.

Syntax Enumerated Integer. Supports the following value(s):

Disabled = 0
Enabled = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 126

SN-IPv6-Egress-Filtering

This attribute enables egress filtering to make sure that packets being sent to the mobile device have an interface ID that matches that of the mobile device. This feature is meant to protect the Mobile from receiving unwanted packets from the Internet.

Syntax Enumerated Integer. Supports the following value(s):

Disabled = 0
Enabled = 1

no-local-alloc-validate = 0
local-alloc = 1
local-alloc-validate = 2

Detection = 1
Disconnection = 2
Dormant-Only-Disconnection = 3
Dormant-Only-Detection = 4

Length 4

Type 26

Vendor ID 8164

VSA Type 45

SN-Long-Duration-Notification

SN-Long-Duration-Notification.

Syntax Enumerated Integer. Supports the following value(s):

Suppress = 0
Send = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 253

SN-Long-Duration-Timeout

This attribute is used to detect and if necessary disconnect sessions connected to the PDSN. This attribute configures the time period, in seconds, before either alerting the administrator or disconnecting the subscriber.

Syntax Integer

Length 4

Type 26

Vendor ID 8164

VSA Type 44

SN-Max-Sec-Contexts-Per-Subs

Maximum secondary PDP contexts per subscriber.

Syntax Unsigned Integer

Length 2

Type 26

Vendor ID 8164

VSA Type 290

SN-Mediation-Acct-Rsp-Action

When this attribute is set to None, there is no action taken while waiting for a response for the accounting start message from the Mediation Accounting server. When this attribute is set to No-Early-PDUs the system buffers all packets from the user (uplink) until a response for the accounting start message is received from the Mediation Accounting server. When set to Delay_GTP_Response, the system does not send a GTP create PDP response to the GGSN until a response for the accounting start message is received from the Mediation Accounting server. If the attribute is not present in Access-Accept message or if the attribute value is invalid, the value "None" is assumed.

Syntax Enumerated Integer. Supports the following value(s):

None = 0
No_Early_PDUs = 1
Delay_GTP_Response = 2

Length 4

Type 26

Vendor ID 8164

VSA Type 105

SN-Mediation-Enabled

This attribute indicates whether the Mediation Accounting configuration is enabled or disabled for GGSN.

Syntax Enumerated Integer. Supports the following value(s):

Disabled = 0
Enabled = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 123

SN-Mediation-No-Interims

This attribute is used to disable or enable Mediation Interim Accounting Records for the session.

Syntax Enumerated Integer. Supports the following value(s):

Disabled = 0
Enabled = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 146

SN-Mediation-VPN-Name

This attribute specifies the Mediation Context name for the session.

Syntax String

Length 1-128

Type 26

Vendor ID 8164

VSA Type 104

SN-Min-Compress-Size

This attribute specifies the minimum size (in octets) a data packet can have in order to be compressed.

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 8164

VSA Type 23

SN-MIP-AAA-Assign-Addr

This attribute specifies if the PDSN/FA will allow AAA to assign the home address. The default is to not allow AAA to assign the home address.

Syntax Enumerated Integer. Supports the following value(s):

Disabled = 0
Enabled = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 50

SN-MIP-ANCID

Accounting correlation ID created by IPGW, received by VBM and HBM.

Syntax Opaque Value

Length 12

Type 26

Vendor ID 8164

VSA Type 166

SN-MIP-Dual-Anchor

Enable/disable dual-anchor service for a subscriber.

Syntax Enumerated Integer. Supports the following value(s):

Disabled = 0
Enabled = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 165

SN-MIP-HA-Assignment-Table

MIP-HA Assignment Table name. When this is received in an Access-Accept message, the system uses this local table to get the HA Address.

Syntax String

Length 1-253

Type 26

Vendor ID 8164

VSA Type 154

SN-MIP-Match-AAA-Assign-Addr

This attribute specifies if the PDSN/FA will enforce that a non-zero AAA-specified home address must match the home address present in the MIP RRQ from the mobile node, and disconnect the subscriber session if a match is not present. The default is not to force the addresses to match.

Syntax Enumerated Integer. Supports the following value(s):

Disabled = 0
Enabled = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 51

SN-MIP-MIN-Reg-Lifetime-Realm

This attribute configures the minimum MIP registration lifetime for a subscriber/realm.

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 8164

VSA Type 12

SN-MIP-Reg-Lifetime-Realm

This attribute configures the maximum MIP registration lifetime for a subscriber/realm.

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 8164

VSA Type 175

SN-MIP-Send-Ancid

This attribute enables/disables sending ANCID from FA to HA in MIP RRQ.

Syntax Enumerated Integer. Supports the following value(s):

Disabled = 0
Enabled = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 163

SN-MIP-Send-Correlation-Info

This attribute enables/disables sending of correlation-id from FA to HA in MIP RRQ.

Syntax Enumerated Integer. Supports the following value(s):

Disabled = 0
NVSE_Starent = 1
NVSE_CUstom1 = 2
NVSE_Custom2 = 3

Length 4

Type 26

Vendor ID 8164

VSA Type 188

SN-MIP-Send-Host-Config

This attribute is used to enable/disable Host Config Extension in MIP RRQ.

Type 26

Syntax Enumerated Integer. Supports the following value(s):

Disabled = 0
Enabled = 1

Length 1

Vendor ID 8164

VSA Type 311

SN-MIP-Send-Imsi

AAA attribute to enable/disable sending IMSI from FA to HA in MIP RRQ.

Syntax Enumerated Integer. Supports the following value(s):

Disabled = 0
NVSE_Starent = 1
NVSE_Custom1 = 2
NVSE_Custom2 = 3

Length 4

Type 26

Vendor ID 8164

VSA Type 164

SN-MIP-Send-Term-Verification

This attribute specifies whether the PDSN/FA should send the Terminal Verification Normal Vendor/Organization Specific Extension (NVSE) in the Mobile IP RRQ message to the HA. The default is not to send the Terminal Verification NVSE.

Syntax Enumerated Integer. Supports the following value(s):

Disabled = 0
NVSE_Custom1 = 1
NVSE_Custom2 = 2
NVSE_Starent = 3

Length 4

Type 26

Vendor ID 8164

VSA Type 48

SN-MN-HA-Hash-Algorithm

This attribute contains the hash algorithm to use for MN-HA authentication.

Syntax Enumerated Integer. Supports the following value(s):

MD5 = 1
MD5-RFC2002 = 2
HMAC-MD5 = 3

Length 4

Type 26

Vendor ID 8164

VSA Type 99

SN-MN-HA-Timestamp-Tolerance

This attribute indicates the duration of timestamp tolerance, in seconds, to use for MN-HA authentication.

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 8164

VSA Type 30

SN-Mode

Robust Header Compression (ROHC) Mode. Reliable mode means each ROHC control needs to be Acknowledged. Optimistic mode is a modified version to reduce the number of control messages and bandwidth consumption. Unidirectional assumes a one way link without any Feedback from the decompressor.

Syntax Enumerated Integer. Supports the following value(s):

Reliable = 0
Optimistic = 1
Unidirectional = 2

Length 4

Type 26

Vendor ID 8164

VSA Type 151

SN-MS-ISDN

SN-MS-ISDN.

Syntax Opaque Value

Length 1-9

Type 26

Vendor ID 8164

VSA Type 248

SN-NAI-Construction-Domain

This attribute specifies the domain name to use when constructing the NAI.

Syntax String

Length 1-247

Type 26

Vendor ID 8164

VSA Type 37

SN-NAT-IP-Address

This attribute includes the NAT (public) IP address used for the call.

Syntax IPv4 Address

Length 4

Type 26

Vendor ID 8164

VSA Type 297

SN-Node-Functionality

This attribute includes the functionality identifier of the IMS node where the cause code was generated.

Syntax Enumerated Integer. Supports the following value(s):

S-CSCF = 0
P-CSCF = 1
I-CSCF = 2

Length 4

Type 26

Vendor ID 8164

VSA Type 268

SN-NPU-Qos-Priority

This attribute configures inter-subscriber priority queueing based on class of service offered. Gold has the highest priority and Best_effort the lowest priority. From_DSCP means the priority queueing will be done based on the DSCP marking that the incoming subscriber packet carries.

Syntax Enumerated Integer. Supports the following value(s):

Best_Effort = 0
Bronze = 1
Silver = 2
Gold = 3
From_DSCP = 4

Length 4

Type 26

Vendor ID 8164

VSA Type 98

SN-Ntk-Initiated-Ctx-Ind-Flag

Indicates whether the GGSN call is a network initiated PDP Context.

Syntax Opaque Value

Length 1

Type 26

Vendor ID 8164

VSA Type 142

SN-Ntk-Session-Disconnect-Flag

SN-Ntk-Session-Disconnect-Flag.

Syntax Enumerated Integer. Supports the following value(s):

Session-Disconnect = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 143

SN-Nw-Reachability-Server-Name

This attribute specifies the name of the Network Reachability Detection Server.

Syntax String

Length 1-16

Type 26

Vendor ID 8164

VSA Type 65

SN-Originating-IOI

This attribute holds the Inter Operator Identifier for the originating network in the home network of the originating end user.

Syntax String

Length 1-253

Type 26

Vendor ID 8164

VSA Type 261

SN-Overload-Disc-Connect-Time

This attribute provides inactivity time for session to become candidate for disconnection during overload.

Syntax Uint32

Type 26

Vendor ID 8164

VSA Type 233

SN-Overload-Disc-Inact-Time

This attribute provides inactivity time for session to become candidate for disconnection during overload.

Syntax Uint32

Type 26

Vendor ID 8164

VSA Type 234

SN-Overload-Disconnect

This attribute enables (if one) and disables the overload-disconnect feature for a subscriber.

Syntax Uint32

Type 26

Vendor ID 8164

VSA Type 235

SN-PDG-TTG-Required

TTG mode of operation Required for PDG.

Syntax Enumerated Integer. Supports the following value(s):

No = 0
Yes = 1

Length 1

Type 26

Vendor ID 8164

VSA Type 299

SN-PDIF-MIP-Release-TIA

PDIF mobile IP release TIA.

Syntax Enumerated Integer. Supports the following value(s):

No = 0
Yes = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 172

SN-PDIF-MIP-Required

PDIF mobile IP required.

Syntax Enumerated Integer. Supports the following value(s):

No = 0
Yes = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 170

SN-PDIF-MIP-Simple-IP-Fallback

PDIF mobile IP simple IP fallback.

Syntax Enumerated Integer. Supports the following value(s):

No = 0
Yes = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 173

SN-PDSN-Correlation-Id

Correlation ID received from PDSN to HA.

Syntax Opaque Value

Length 8

Type 26

Vendor ID 8164

VSA Type 189

SN-PDSN-Handoff-Req-IP-Addr

This attribute specifies if the PDSN should reject and terminate the subscriber session when the proposed address in IPCP by the mobile does not match the existing address in the PDSN. The default (Disabled) is not to reject these sessions.

Syntax Enumerated Integer. Supports the following value(s):

Disabled = 0
Enabled = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 46

SN-PDSN-NAS-Id

NAS Identifier received from PDSN to HA

Syntax String

Length 1-253

Type 26

Vendor ID 8164

VSA Type 190

SN-PDSN-NAS-IP-Address

NAS IP address received from PDSN to HA.

Syntax IPv4 Address

Length 4

Type 26

Vendor ID 8164

VSA Type 191

SN-Permit-User-Mcast-PDUs

Specifies whether or not to let the subscriber discard multicast PDUs.

Syntax Enumerated Integer. Supports the following value(s):

disabled = 0
enabled = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 134

SN-PPP-Accept-Peer-v6Ifid

This attribute indicates the acceptance of the interface ID provided by peer during PPP IPv6CP if the ID is valid. The default is disabled.

Syntax Enumerated Integer. Supports the following value(s):

Disabled = 0
Enabled = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 95

SN-PPP-Always-On-Vse

SN-PPP-Always-On-Vse.

Syntax Enumerated Integer. Supports the following value(s):

Disabled = 0
Enabled = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 130

SN-PPP-Data-Compression-Mode

This attribute indicates the PPP data compression mode to use for the PPP session when PPP data compression is used.

Syntax Enumerated Integer. Supports the following value(s):

Normal = 0
Stateless = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 19

SN-PPP-Data-Compression

This attribute indicates the PPP data compression algorithm to use for the PPP session. The attribute value is a bit field, and many algorithms can be specified to indicate that one of these may be chosen by the user.

Syntax Enumerated Integer. Supports the following value(s):

None = 0
Stac-LZS = 1
MPPC = 2
Deflate = 4

Length 4

Type 26

Vendor ID 8164

VSA Type 9

SN-PPP-Keepalive

This attribute indicates the interval for the PPP keepalive, in seconds.

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 8164

VSA Type 16

SN-PPP-NW-Layer-IPv4

This attribute indicates the PPP IPCP negotiation for IPv4. The default is enabled.

Syntax Enumerated Integer. Supports the following value(s):

Disabled = 0
Enabled = 1
Passive = 2

Length 4

Type 26

Vendor ID 8164

VSA Type 92

SN-PPP-NW-Layer-IPv6

This attribute indicates the PPP IPv6CP negotiation for IPv6. The default is enabled.

Syntax Enumerated Integer. Supports the following value(s):

Disabled = 0
Enabled = 1
Passive = 2

Length 4

Type 26

Vendor ID 8164

VSA Type 93

SN-PPP-Outbound-Password

This attribute indicates the password to be used when the user side of the PPP connection requires authentication.

Syntax String

Length 1-253

Type 26

Vendor ID 8164

VSA Type 15

SN-PPP-Outbound-Username

This attribute indicates the username to be used when the user side of the PPP connection requires authentication.

Syntax String

Length 1-253

Type 26

Vendor ID 8164

VSA Type 61

SN-PPP-Progress-Code

This attribute provides information about the "state" of the PPP connection, when the connection was terminated.

Syntax Enumerated Integer. Supports the following value(s):

Not-Defined = 0
Call-Lcp-Down = 10
Call-Disconnecting = 20
Call-Ppp-Renegotiating = 30
Call-Arrived = 40
Call-Pdg-Tcp-Connecting = 45
Call-Pdg-Ssl-Connecting = 46
Call-Lcp-Up = 50
Call-Authenticating = 60
Call-Bcmcs-Authenticating = 70
Call-Authenticated = 80
Call-Tunnel-Connecting = 85
Call-Ipcp-Up = 90
Call-Imsa-Authorizing = 95
Call-Imsa-Authorized = 97
Call-MBMS-UE-Authorizing = 98
Call-MBMS-Bearer-Authorizing = 99
Call-Simple-IP-Connected = 100
Call-Mobile-IP-Connected = 110
Call-Tunnel-Connected = 115
Call-Pdp-Type-IP-Connected = 120
Call-Pdp-Type-IPv6-Connected = 125
Call-Pdp-Type-PPP-Connected = 130
Call-GTP-Connecting = 131
Call-GTP-Connected = 132
Call-Proxy-Mobile-IP-Connected = 140
Call-Pdg-Ssl-Connected = 141
Call-Pdg-Connected = 142
Call-Ipsg-Connected = 145
Call-Bcmcs-Connected = 150
Call-MBMS-UE-Connected = 155
Call-MBMS-Bearer-Connected = 156
Call-Pending-Addr-From-DHCP = 160
Call-Got-Addr-From-DHCP = 170
Call-HA-IPSEC-Tunnel-Connecting = 180
Call-HA-IPSEC-Connected = 190
Call-ASN-Non-Anchor-Connected = 200
Call-ASNPC-Connected = 210 Call-Mobile-IPv6-Connected = 220
Call-PMIPv6-Connected = 221
Call-PHSPC-Connected = 230
Call-GTP-IPv4-Connected = 235
Call-GTP-IPv6-Connected = 236
Call-GTP-IPv4-IPv6-Connected = 237
Call-SGW-Connected = 245
Call-MME-Attached = 246
Call-Auth-Only-Connected = 247

Length 4

Type 26

Vendor ID 8164

VSA Type 4

SN-PPP-Reneg-Disc

PPP remote reneg disconnect policy

Type 26

Syntax Enumerated Integer. Supports the following value(s):

Never = 0
Always = 1
NAI_Prefix_MSID_Mismatch = 2

Length 4

Vendor ID 8164

VSA Type 187

SN-Prepaid-Compressed-Count

This attribute indicates if a Pre-paid subscriber's byte usage should be counted on the basis of compressed or uncompressed byte data over the subscriber's PPP connection to the system. If not present, the default is to count uncompressed byte data.

Syntax Enumerated Integer. Supports the following value(s):

Uncompressed = 0
Compressed = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 31

SN-Prepaid-Final-Duration-Alg

For prepaid, final duration is calculated based on the algorithm specified by the value of this attribute.

Syntax Enumerated Integer. Supports the following value(s):

current_time = 0
last-user-layer3-activity-time = 1
last-airlink-activity-time = 2
last-airlink-activity-time-last-reported = 3

Length 4

Type 26

Vendor ID 8164

VSA Type 135

SN-Prepaid-Inbound-Octets

In an Access-Accept, this indicates how many additional inbound (bytes delivered to the subscriber) byte credits should be granted to the subscriber. In an Accounting- Request, this indicates how many total inbound byte credits have been granted to the subscriber. When this attribute is not present in the Access-Accept, then pre-paid usage checking is disabled on an inbound octet basis.

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 8164

VSA Type 32

SN-Prepaid-Outbound-Octets

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 8164

VSA Type 33

SN-Prepaid-Preference

This attribute specifies whether prepaid is volume based or duration based.

Syntax Enumerated Integer. Supports the following value(s):

prepaid_duration = 0
prepaid_volume = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 129

SN-Prepaid-Timeout

This attribute indicates how much time may elapse before a new request for more pre-paid credits is issued. If the specified time has elapsed since the prior grant of credits was received from the RADIUS server, then a new request for credits is issued. This attribute is primarily used to periodically update the subscriber of new credits issued since the subscriber was connected. Note that credit requests will still be made on behalf of the subscriber when the subscriber drops down to the low watermark of credits (or zero if there is no low watermark). The presence or absence of this attribute does not affect that mechanism in any way. However, this timer is re-set whenever any grant of credits is received on behalf of the subscriber, regardless of why the grant of credits was requested.

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 8164

VSA Type 35

SN-Prepaid

Prepaid

Syntax Enumerated Integer. Supports the following value(s):

no_prepaid = 0
custom_prepaid = 1
standard_prepaid = 2
wimax_prepaid = 4

Disabled = 0
Enabled = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 52

SN-Pseudonym-Username

This attribute contains the pseudonym user name generated by AAA server.

Syntax Opaque Value

Length 1-256

Type 26

Vendor ID 8164

VSA Type 305

SN-QoS-Background-Class

This attribute defines the QOS Background Traffic Class.

Syntax Opaque Value

Length 28

Type 26

Vendor ID 8164

VSA Type 91

SN-QoS-Class-Background-PHB

Quality of Service DSCP classification value.

Syntax Enumerated Integer. Supports the following value(s):

Best-Effort = 0
Pass-Through = 1
AF11 = 10
AF12 = 12
AF13 = 14
AF21 = 18
AF22 = 20
AF23 = 22
AF31 = 26
AF32 = 28
AF33 = 30
AF41 = 34
AF42 = 36
AF43 = 38
EF = 46

Length 4

Type 26

Vendor ID 8164

VSA Type 113

SN-QoS-Class-Conversational-PHB

Quality of Service DSCP classification value.

Syntax Enumerated Integer. Supports the following value(s):

Best-Effort = 0
Pass-Through = 1
AF11 = 10
AF12 = 12
AF13 = 14
AF21 = 18
AF22 = 20
AF23 = 22
AF31 = 26
AF32 = 28
AF33 = 30
AF41 = 34
AF42 = 36
AF43 = 38
EF = 46

Length 4

Type 26

Vendor ID 8164

VSA Type 111

SN-QoS-Class-Interactive-1-PHB

Interactive-1 class PHB value.

Syntax Enumerated Integer. Supports the following value(s):

Best-Effort = 0
Pass-Through = 1
AF11 = 10
AF12 = 12
AF13 = 14
AF21 = 18
AF22 = 20
AF23 = 22
AF31 = 26
AF32 = 28
AF33 = 30
AF41 = 34
AF42 = 36
AF43 = 38
EF = 46

Length 4

Type 26

Vendor ID 8164

VSA Type 114

SN-QoS-Class-Interactive-2-PHB

Interactive-2 class PHB.

Syntax Enumerated Integer. Supports the following value(s):

Best-Effort = 0
Pass-Through = 1
AF11 = 10
AF12 = 12
AF13 = 14
AF21 = 18
AF22 = 20
AF23 = 22
AF31 = 26
AF32 = 28
AF33 = 30
AF41 = 34
AF42 = 36
AF43 = 38
EF = 46

Length 4

Type 26

Vendor ID 8164

VSA Type 115

SN-QoS-Class-Interactive-3-PHB

Interactive-3 class PHB.

Syntax Enumerated Integer. Supports the following value(s):

Best-Effort = 0
Pass-Through = 1
AF11 = 10
AF12 = 12
AF13 = 14
AF21 = 18
AF22 = 20
AF23 = 22
AF31 = 26
AF32 = 28
AF33 = 30
AF41 = 34
AF42 = 36
AF43 = 38
EF = 46

Length 4

Type 26

Vendor ID 8164

VSA Type 116

SN-QoS-Class-Streaming-PHB

Quality of Service DSCP classification value.

Syntax Enumerated Integer. Supports the following value(s):

Best-Effort = 0
Pass-Through = 1
AF11 = 10
AF12 = 12
AF13 = 14
AF21 = 18
AF22 = 20
AF23 = 22
AF31 = 26
AF32 = 28
AF33 = 30
AF41 = 34
AF42 = 36
AF43 = 38
EF = 46

Length 4

Type 26

Vendor ID 8164

VSA Type 112

SN-QoS-Conversation-Class

This attribute defines the QOS Conversation Traffic Class.

Syntax Opaque Value

Length 28

Type 26

Vendor ID 8164

VSA Type 86

This attribute enables/disables Traffic Policing/Shaping in downlink direction.

Syntax Enumerated Integer. Supports the following value(s):

Disabled = 0
Policing = 1
Shaping = 2

Length 4

Type 26

Vendor ID 8164

VSA Type 73

SN-QoS-Tp-Uplk

This attribute enables/disables Traffic Policing/Shaping in uplink direction.

Syntax Enumerated Integer. Supports the following value(s):

Disabled = 0
Policing = 1
Shaping = 2

Length 4

Type 26

Vendor ID 8164

VSA Type 79

SN-QoS-Traffic-Policy

This compound attribute simplifies sending QoS values for Traffic Class, Direction, Burst-Size, Committed-Data-Rate, Peak-Data-Rate, Exceed-Action, and Violate-Action from the RADIUS server. When the SN-QoS-Traffic-Policy attribute is sent along with Acct-Session-ID attribute, the system matches the particular PDP context, and applies the new policy and retains the policy with the subscriber profile for future use. The next time the system sends a CoA request with a new policy and a different Acct-Session-ID for the same subscriber, the previously received policy is also applied to the matching PDP context along with the new policy.

VSA Type 162

SN-Radius-Returned-Username

This attribute is used to prefer RADIUS returned user name over constructed user name in the accounting messages.

Type 26

Syntax Enumerated Integer. Supports the following value(s):

No = 0
Yes = 1

Length 4

Vendor ID 8164

VSA Type 236

SN-Re-CHAP-Interval

The Periodic CHAP authentication interval for PPP, in seconds.

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 8164

VSA Type 7

SN-Roaming-Behavior

This attribute specifies the configuration for the behavior bits settings for a roaming subscriber in an APN.

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 8164

VSA Type 121

SN-Roaming-Profile

This attribute specifies the configuration for the profile bits settings for a roaming subscriber in an APN.

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 8164

VSA Type 118

SN-Roaming-Sub-Use-GGSN

This attribute configures GGSN to accept GGSN's charging characteristics for roaming subscribers defined for the APN.

Syntax Enumerated Integer. Supports the following value(s):

Deny = 0
Accept = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 108

SN-ROHC-Flow-Marking-Mode

Configure ROHC compression for marked flows only.

Type 26

Syntax Enumerated Integer. Supports the following value(s):

False = 0
True = 1

Length 4

Vendor ID 8164

VSA Type 195

SN-ROHC-Profile-Name

Specifies the ROHC profile to use for the subscriber.

Type 26

Syntax String

Length 1-64

Vendor ID 8164

VSA Type 238

SN-Role-Of-Node

This attribute denotes the role of the CSCF.

Syntax Enumerated Integer. Supports the following value(s):

Originating_Role = 0
Terminating_Role = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 256

SN-Routing-Area-Id

For GGSN calls this indicates the Routing Area ID of the subscriber.

Syntax Opaque Value

Length 3

Type 26

Vendor ID 8164

VSA Type 249

SN-Rulebase

When the session is active charging enabled, Rulebase name will specify one of the pre-configured ECSv2 rulebases in active charging subsystem.

Syntax String

Length 1-64

Type 26

Vendor ID 8164

VSA Type 250

This attribute indicates the service type that the user is accessing.

Syntax Enumerated Integer. Supports the following value(s):

None = 0
PDSN = 1
Management = 2
HA = 3
GGSN = 4
LNS = 5
IPSG = 6
CSCF = 7
ASNGW = 8
PDIF = 9
STANDALONE_FA = 10
SGSN = 11
PHSGW = 12
EPDG = 13
MIPV6HA = 14
PGW = 15
SGW = 16
FNG = 17
MSEG = 18
HNBGW = 19
BNG = 20
WSG = 21
SAMOG = 22

Length 4

Type 26

Vendor ID 8164

VSA Type 24

SN-Session-Id

This attribute contains Call-ID of the SIP session.

Syntax String

Length 0-160

Type 26

Vendor ID 8164

VSA Type 257

SN-Simultaneous-SIP-MIP

This attribute indicates if a PDSN Subscriber can simultaneously be given Simple IP and Mobile IP service.

Syntax Enumerated Integer. Supports the following value(s):

Disabled = 0
Enabled = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 22

SN-SIP-Method

This attribute identifies the SIP-method for which acct request is sent.

Syntax String

Length 0-32

Type 26

Vendor ID 8164

VSA Type 254

SN-SIP-Request-Time-Stamp

This attribute specifies the time of initial SIP request.

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 8164

VSA Type 258

SN-SIP-Response-Time-Stamp

This attribute specifies the time of response to initial SIP request.

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 8164

VSA Type 259

SN-Software-Version

Specifies the software version. Includes the major version number, minor version number, and build number.

Type 26

Syntax String

Length 1-32

Vendor ID 8164

VSA Type 288

SN-Subs-Acc-Flow-Traffic-Valid

Specifies the subscriber account flow traffic is valid.

Type 26

Syntax Enumerated Integer. Supports the following value(s):

Disable = 0
Enable = 1

Length 4

Vendor ID 8164

VSA Type 225

SN-Subscriber-Accounting

This attribute specifically enables or disables subscriber accounting. Note that if enabled, subscriber accounting still needs to be enabled in the subscriber's AAA context for accounting to be performed.

Syntax Enumerated Integer. Supports the following value(s):

None = 0
Radius = 1
GTPP = 2

Length 4

Type 26

Vendor ID 8164

VSA Type 64

SN-Subscriber-Acct-Interim

This attribute specifies if accounting INTERIM messages are enabled for the subscriber. Note that accounting must also be globally enabled for the subscriber (SN-Subscriber-Accounting), and enabled for the subscriber's AAA context (along with a specific INTERIM interval), if accounting INTERIM messages are to be sent.

Syntax Enumerated Integer. Supports the following value(s):

Normal = 0
Suppress = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 70

SN-Subscriber-Acct-Mode

Specifies the subscriber accounting mode.

Syntax Enumerated Integer. Supports the following value(s):

flow-based-auxilliary = 0
flow-based-all = 1
flow-based-none = 2
session-based = 3
main-a10-only = 4

Length 4

Type 26

Vendor ID 8164

VSA Type 192

SN-Subscriber-Acct-Rsp-Action

When this attribute is set to None, there is no action taken while waiting for a response for the accounting start message from the RADIUS server. When this attribute is set to No-Early-PDUs the system buffers all packets from the user (uplink) until a response for the accounting start message is received from the RADIUS server. When set to Delay_GTP_Response, the system does not send a GTP create response to the GGSN until a response for the accounting start message is received from the RADIUS server.

Syntax Enumerated Integer. Supports the following value(s):

None = 0
No_Early_PDUs = 1
Delay_GTP_Response = 2

Length 4

Type 26

Vendor ID 8164

VSA Type 100

SN-Subscriber-Acct-Start

This attribute specifies if accounting START messages are enabled for the subscriber. Note that accounting must also be globally enabled for the subscriber (SN-Subscriber-Accounting), and enabled for the subscriber's AAA context, if accounting START messages are to be sent.

Syntax Enumerated Integer. Supports the following value(s):

Normal = 0
Suppress = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 69

SN-Subscriber-Acct-Stop

This attribute specifies if accounting STOP messages are enabled for the subscriber. Note that accounting must also be globally enabled for the subscriber (SN-Subscriber-Accounting), and enabled for the subscriber's AAA context, if accounting STOP messages are to be sent.

Syntax Enumerated Integer. Supports the following value(s):

Normal = 0
Suppress = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 71

SN-Subscriber-Class

Customer-specific attribute to support specific subscriber billing behavior.

Syntax Enumerated Integer. Supports the following value(s):

Normal_Subscriber = 0
Ting_100 = 1
Ting_500 = 2
Ting_Buddy = 3
Ting_Star = 4
Ting_Nolimit_SMS = 5
Kids_Locator = 6
Ting_2000 = 7
Handicapped_Welfare = 8
Reserved = 9

Length 4

Type 26

Vendor ID 8164

VSA Type 219

SN-Subscriber-Dormant-Activity

This attribute specifies whether to treat dormant packets routed to the mobile as activity for idle timeout purposes. The default is Enabled. Disabled means dormant packets routed to the mobile is not treated as activity for idle timeout purposes.

Syntax Enumerated Integer. Supports the following value(s):

Disabled = 0
Enabled = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 66

SN-Subscriber-IP-Hdr-Neg-Mode

This attribute specifies whether to wait (detect) for IP header compression to be requested by the mobile before responding, or not to wait (force). Force is the default.

Syntax Enumerated Integer. Supports the following value(s):

Force = 0
Detect = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 67

SN-Subscriber-IP-TOS-Copy

This attribute controls the copying of the IP TOS octet value from IPv4 datagrams to the IP header in tunnel encapsulation.

Syntax Enumerated Integer. Supports the following value(s):

None = 0
Access-Tunnel = 1
Data-Tunnel = 2
Both = 3

Length 4

Type 26

Vendor ID 8164

VSA Type 85

SN-Subscriber-Nexthop-Address

This attribute specifies the nexthop gateway address to be returned by AAA on a per subscriber basis.

Syntax IPv4 Address

Length 4

Type 26

Vendor ID 8164

VSA Type 127

SN-Subscriber-No-Interims

This is a GGSN specific attribute. When set to 0 (disabled) interim accounting is generated. When set to 1 (enabled) interim accounting generation is disabled.

Syntax Enumerated Integer. Supports the following value(s):

Disabled = 0
Enabled = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 133

SN-Subscriber-Permission

This attribute indicates the services allowed to be delivered to the subscriber. The attribute value is a bit field, and many algorithms can be specified to indicate that one of these may be chosen by the user.

Syntax Enumerated Integer. Supports the following value(s):

None = 0
Simple-IP = 1
Mobile-IP = 2
Simple-IP-Mobile-IP = 3
HA-Mobile-IP = 4
Simple-IP-HA-Mobile-IP = 5
Mobile-IP-HA-Mobile-IP = 6
SIP-MIP-HA-MIP = 7
GGSN-PDP-TYPE-IP = 0x08
GGSN-PDP-TYPE-PPP = 0x10
Network-Mobility = 0x20
FA-HA-NEMO = 0x26
Pmipv6-interception = 0x40
HA-Mobile-Pmipv6 = 0x44
FA-HA-Mobile-Pmipv6 = 0x46
All = 0x7F

Length 4

Type 26

Vendor ID 8164

VSA Type 20

SN-Subscriber-Template-Name

RADIUS returned subscriber template.

Type 26

Syntax String

Length 1-127

Vendor ID 8164

VSA Type 158

SN-Subs-IMSA-Service-Name

IMS authorization service name.

Type 26

Syntax String

Length 1-128

Vendor ID 8164

VSA Type 159

SN-Subs-VJ-Slotid-Cmp-Neg-Mode

Enable/Disable slot ID compression in either direction when using VJ compression.

Type 26

Syntax Enumerated Integer. Supports the following value(s):

None = 0
Receive = 1
Transmit = 2
Both = 3

Length 4

Vendor ID 8164

VSA Type 221

SN-Terminating-IOI

This attribute holds the Inter Operator Identifier for the originating network in the home network of the terminating end user.

Syntax String

Length 1-253

Type 26

Vendor ID 8164

VSA Type 262

SN-Tp-Dnlk-Burst-Size

This attribute specifies the Traffic Policing downlink burst size in bytes.

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 8164

VSA Type 76

SN-Tp-Dnlk-Committed-Data-Rate

This attribute specifies the Traffic Policing downlink committed data rate in bps.

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 8164

VSA Type 74

SN-Tp-Dnlk-Exceed-Action

This attribute specifies the action to take on Traffic Policing downlink packets that exceed the committed-data-rate but do not violate the peak-data-rate.

Syntax Enumerated Integer. Supports the following value(s):

Transmit = 0
Drop = 1
Lower-IP-Precedence = 2
Buffer = 3
Transmit-On-Buffer-Full = 4

Length 4

Type 26

Vendor ID 8164

VSA Type 77

SN-Tp-Dnlk-Peak-Data-Rate

This attribute specifies the Traffic Policing downlink peak data rate in bps.

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 8164

VSA Type 75

SN-Tp-Dnlk-Violate-Action

This attribute specifies the action to take on Traffic Policing downlink packets that exceed both the committed-data-rate and the peak-data-rate.

Syntax Enumerated Integer. Supports the following value(s):

Transmit = 0
Drop = 1
Lower-IP-Precedence = 2
Buffer = 3
Transmit-On-Buffer-Full = 4

Length 4

Type 26

Vendor ID 8164

VSA Type 78

SN-TPO-Policy

This attribute contains the TPO policy name.

Syntax String

Length 1-63

Type 26

Vendor ID 8164

VSA Type 308

SN-Tp-Uplk-Burst-Size

This attribute specifies the Traffic Policing uplink burst size in bytes.

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 8164

VSA Type 82

SN-Tp-Uplk-Committed-Data-Rate

This attribute specifies the Traffic Policing uplink committed data rate in bps.

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 8164

VSA Type 80

SN-Tp-Uplk-Exceed-Action

This attribute specifies the action to take on Traffic Policing uplink packets that exceed the committed-data-rate but do not violate the peak-data-rate.

Syntax Enumerated Integer. Supports the following value(s):

Transmit = 0
Drop = 1
Lower-IP-Precedence = 2
Buffer = 3
Transmit-On-Buffer-Full = 4

Length 4

Type 26

Vendor ID 8164

VSA Type 83

SN-Tp-Uplk-Peak-Data-Rate

This attribute specifies the Traffic Policing Uplink Peak Data Rate in bps.

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 8164

VSA Type 81

SN-Tp-Uplk-Violate-Action

This attribute specifies the action to take on Traffic Policing uplink packets that exceed both the committed-data-rate and the peak-data-rate.

Syntax Enumerated Integer. Supports the following value(s):

Transmit = 0
Drop = 1
Lower-IP-Precedence = 2
Buffer = 3
Transmit-On-Buffer-Full = 4

Length 4

Type 26

Vendor ID 8164

VSA Type 84

SN-Traffic-Group

This attribute is used to assign a tag to an FA or a group of FAs, so that traffic policy can be enforced based on the tag value.

Syntax Unsigned Integer

Length 2

Type 26

Vendor ID 8164

VSA Type 161

SN-TrafficSelector-Class

The ipsec traffic selector class.

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 8164

VSA Type 307

SN-Transparent-Data

This attribute is used by RADIUS to provide Global Title information for the GGSN to use in CDRs and Quota Auth.

Syntax Opaque Value

Length 1-247

Type 26

Vendor ID 8164

VSA Type 247

SN-Tun-Addr-Policy

Describes IP address validation policy for non L2TP tunneled calls.

Syntax Enumerated Integer. Supports the following value(s):

no-local-alloc-validate = 0
local-alloc = 1
local-alloc-validate = 2

Length 4

Type 26

Vendor ID 8164

VSA Type 156

SN-Tunnel-Gn

Used to enable/disable Gn interface from PDG/TTG to GGSN.

Syntax Enumerated Integer. Supports the following value(s):

Disabled = 0
Enabled = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 174

SN-Tunnel-ISAKMP-Crypto-Map

This attribute specifies the system-defined crypto map to use for the subscriber's Mobile-IP connection, when IPSec is used to protect the Mobile-IP connection. This attribute is salt-encrypted.

Syntax String

Length 1-128

Type 26

Vendor ID 8164

VSA Type 38

SN-Tunnel-ISAKMP-Secret

This attribute specifies the secret to use for IKE.

Syntax String

Length 1-128

Type 26

Vendor ID 8164

VSA Type 39

SN-Tunnel-Load-Balancing

This attribute specifies the load-balancing algorithm to use when tunneling is employed.

Syntax Enumerated Integer. Supports the following value(s):

random = 1
balanced = 2
prioritized = 3

Length 4

Type 26

Vendor ID 8164

VSA Type 27

SN-Tunnel-Password

This attribute contains a secret for tunneling usage. Currently this is only used for L2TP. It is recommended that you use the Tunnel-Password attribute if your RADIUS server supports salt-encryption of attributes.

Syntax Opaque Value

Length 1-240

Type 26

Vendor ID 8164

VSA Type 26

SN-Unclassify-List-Name

Unclassify List Name.

Syntax String

Length 1-32

Type 26

Vendor ID 8164

VSA Type 132

SN-User-Privilege

This attribute specifies the user privilege.

Syntax Enumerated Integer. Supports the following value(s):

Administrative = 6
NAS_Prompt = 7
Inspector = 19650516
Security_Admin = 19660618

Length 4

Type 26

Vendor ID 8164

VSA Type 313

SN-Virtual-APN-Name

This attribute contains the virtual APN name.

Syntax Opaque Value

Length 1-64

Type 26

Vendor ID 8164

VSA Type 94

SN-Visiting-Behavior

This attribute specifies the configuration for the behavior bits settings for a visiting subscriber in an APN.

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 8164

VSA Type 120

SN-Visiting-Profile

This attribute specifies the configuration for the profile bits settings for a visiting subscriber in an APN.

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 8164

VSA Type 117

SN-Visiting-Sub-Use-GGSN

This attribute configures GGSN to accept GGSN's charging characteristics for visiting subscribers defined for the APN.

Syntax Enumerated Integer. Supports the following value(s):

Deny = 0
Accept = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 107

SN-Voice-Push-List-Name

SN-Voice-Push-List-Name.

Syntax String

Length 1-32

Type 26

Vendor ID 8164

VSA Type 131

SN-VPN-ID

This attribute contains the Destination VPN of the user, specified by a 32-bit identifier.

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 8164

VSA Type 1

SN-VPN-Name

This attribute contains the name of the user's Destination VPN.

Syntax String

Length 1-253

Type 26

Vendor ID 8164

VSA Type 2

SN-VRF-Name

This attribute specifies the IP VRF context to distinguish the RADIUS accounting feeds per enterprise.

Syntax String

Length 1-63

Type 26

Vendor ID 8164

VSA Type 242

SN-WiMAX-Auth-Only

Specifies whether the call is established for Authentication Mode Only.

Syntax Enumerated Integer. Supports the following value(s):

Disabled = 0
Enabled = 1

Length 1

Type 26

Vendor ID 8164

VSA Type 306

SN-WLAN-AP-Identifier

This attribute contains the access point identifier for WLAN UE. This attribute comprises LAC and CI digits separated by an underscore. This AP identifier may include Access point MAC address or MAC/SSID. This attribute is received in Acct-Start / Acct-Interim message from WLC.

Syntax Opaque Value

Length 1-48

Type 26

Vendor ID 8164

VSA Type 319

SN-WLAN-UE-Identifier

This attribute contains the identifier for WLAN UE, i.e. device's MAC address in Calling-Station-Id attribute format according to RFC 3580 (MAC address in ASCII format (upper case only), with octet values separated by a "-"). Example: "00-10-A4-23-19-C0". This attribute is received in Acct-Start / Acct-Interim message from WLC.

Syntax Opaque Value

Length 1-17

Type 26

Vendor ID 8164

VSA Type 320

SN-WSG-MIP-Release-TIA

WSG Mobile IP Release TIA

Syntax Enumerated Integer. Supports the following value(s):

No = 0
Yes = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 317

SN-WSG-MIP-Required

This attribute indicates whether or not the WSG Mobile IP is required.

Syntax Enumerated Integer. Supports the following value(s):

No = 0
Yes = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 316

SN-WSG-MIP-Simple-IP-Fallback

WSG Mobile IP Simple IP Fallback

Syntax Enumerated Integer. Supports the following value(s):

No = 0
Yes = 1

Length 4

Type 26

Vendor ID 8164

VSA Type 318

Terminal-Capability

Opaque one byte value received from customer RADIUS server in Access Request. Used in custom dictionary.

Syntax Opaque Value

Length 1

Type 26

Vendor ID 5535

VSA Type 219

Termination-Action

Indicates what action the NAS should take when the service is completed. AAAMgr passes this attribute to SessMgr only for ASN-GW calls. The combination of Session-Timeout and Termination-Action attributes received in Access-Accept or Access-Challenge determines how NAS should interpret it.

Syntax Enumerated Integer. Supports the following value(s):

Default = 0
RADIUS-Request = 1

Length 4

Type 29

Vendor ID N/A

VSA Type N/A

Tunnel-Assignment-ID

This attribute indicates the tunnel to which the session is to be assigned.

Syntax Opaque Value

Length 1-252

Type 82

Vendor ID N/A

VSA Type N/A

Tunnel-Client-Auth-ID

This attribute contains the name of the client for the purposes of tunnel authentication.

Syntax Opaque Value

Length 1-252

Type 90

Vendor ID N/A

VSA Type N/A

Tunnel-Client-Endpoint

This attribute is an identifier of the Tunnel client. When Tunnel-Medium-Type = IPv4, then this attribute is in the form of an IP address string in "dotted-decimal" notation.

Syntax Opaque Value

Length 1-250

Type 66

Vendor ID N/A

VSA Type N/A

Tunnel-Medium-Type

This attribute indicates the protocol medium over which the tunneling protocol runs. It is used to describe the format of the attributes Tunnel-Client-Endpoint and Tunnel-Server-Endpoint.

Syntax Enumerated Integer. Supports the following value(s):

IPv4 = 1
IPv6 = 2
NSAP = 3
HDLC = 4
BBN-1822 = 5
IEEE-802 = 6
E-163 = 7
E-164 = 8
F-69 = 9
X-121 = 10
IPX = 11
Appletalk = 12
Decnet-IV = 13
Banyan-Vines = 14
E-164-NSAP-Subaddress = 15

PPTP = 1
L2F = 2
L2TP = 3
ATMP = 4
VTP = 5
AH = 6
IP-IP = 7
MIN-IP-IP = 8
ESP = 9
GRE = 10
DVS = 11
MIP = 12
VLAN = 13
GN = 14
UDP = 15

Length 4

Type 26

Vendor ID 24757

VSA Type 39

WiMAX-Beginning-Of-Session

This attribute indicates whether the session is new or a continuation of previous flow.

Syntax Enumerated Integer. Supports the following value(s):

False = 0
True = 1

Length 4

Type 26

Vendor ID 24757

VSA Type 22

WiMAX-BS-ID

Uniquely identifies an NAP and a base station within that NAP. The first three octets representing the NAP operator identifier, and the next three the Base Station ID.

Syntax Opaque Value

Length 6-12

Type 26

Vendor ID 24757

VSA Type 46

WiMAX-Capability

This compound attribute identifies the supported WiMAX capabilities.

Type 26

Vendor ID 24757

VSA Type 1

Syntax Compound. Contains the following sub-attribute(s).

WiMAX-Release

Specifies WiMAX release of the sender.

Syntax String

Length 4

Type 1

Accounting-Capabilities

Describes accounting capabilities supported for the session.

Syntax Enumerated Integer. Supports the following value(s):

None = 0x00
IP-Session-Based = 0x01
Flow-Based = 0x02
IP-Session-And-Flow-Based = 0x03

Length 1

Type 2

Hotlining-Capabilities

Supported hotline capabilities.

Syntax Enumerated Integer. Supports the following value(s):

Not-Supported = 0x00
Hotline-Profile-Id = 0x01
NAS-Filter = 0x02
HTTP-Redirection = 0x04
Profile-Id-based-and-HTTP-Redirection-Rule-based = 0x05
IP-Redirection = 0x08

Length 1

Type 3

Idle-Mode-Notification-Capabilities

Describes idle mode notification capabilities.

Syntax Enumerated Integer. Supports the following value(s):

Not-Supported = 0x00
Supported = 0x01

Length 1

Type 4

ROHC-Support

Describes ROHC capability support for the session

Syntax Enumerated Integer. Supports the following value(s):

Not-Supported = 0x00
Supported = 0x01

Type 26

Vendor ID 24757

VSA Type 44

WiMAX-IP-Technology

Indicates the type of WiMAX session being used.

Syntax Enumerated Integer. Supports the following value(s):

SIP = 1
PMIP4 = 2
CMIP4 = 3
CMIP6 = 4
Ethernet-CS = 5
PMIP6 = 6

Length 4

Type 26

Vendor ID 24757

VSA Type 23

WiMAX-NAP-ID

Uniquely identifies the Network Access Provider.

Syntax String

Length 3

Type 26

Vendor ID 24757

VSA Type 45

WiMAX-NSP-ID

Uniquely identifies the Network Service Provider.

Syntax Opaque Value

Length 3

Type 26

Vendor ID 24757

VSA Type 57

WiMAX-Packet-Flow-Descriptor

This compound attribute describes a packet flow. A packet flow may describe uni-directional flow and bi-directional flow. The packet flow descriptor may be pre-provisioned. A packet flow descriptor references one or two QoS specifications.

Type 26

Vendor ID 24757

VSA Type 28

Syntax Compound. Contains the following sub-attribute(s).

Length 4-1400

PDF-ID

Used to match all records from the same Packet Data Flow.

Syntax Unsigned Integer

Length 2

Type 1

SDF-ID

Used to match all PDFs from the same Service Data Flow.

Syntax Unsigned Integer

Length 2

Type 2

Service-Profile-ID

Identifies a pre-configured Flow Descriptor at the NAS.

Syntax Unsigned Integer

Length 4

Type 3

Direction

Direction of the PDF.

Syntax Enumerated Integer. Supports the following value(s):

Uplink = 1
Downlink = 2
Bi-Directional = 3

Length 1

Type 4

Activation-Trigger

Specifies the trigger to be used for the activation of Service Flow.

Syntax Enumerated Integer. Supports the following value(s):

Provisioned = 0x01
Admit = 0x02
Provisioned-Admit = 0x03
Activate = 0x04
Provisioned-Activate = 0x05
Admit-Activate = 0x06
Provisioned-Admit-Activate = 0x07 Dynamic = 0x08 Dynamic-Admit = 0x0a Dynamic-Activate = 0x0c Dynamic-Admit-Activate = 0x0e

Length 1

Type 5

Transport-Type

Type of transport (IP, Ethernet).

Syntax Enumerated Integer. Supports the following value(s):

IPv4-CS = 1
IPv6-CS = 2
Ethernet = 3

Length 1

Type 6

Uplink-QoS-ID

Identifier of the QoS Descriptor for Uplink or Bidirection.

Syntax Unsigned Integer

Length 1

Type 7

Downlink-QoS-ID

Identifier of the QoS Descriptor for Downlink.

Syntax Unsigned Integer

Length 1

Type 8

Uplink-Classifier

Classifier to match for traffic flowing in Uplink Direction.

Syntax String

Length 1-240

Type 9

Downlink-Classifier

Classifier to match for traffic flowing in Downlink Direction.

Syntax String

Length 1-240

Type 10

WiMAX-Packet-Flow-Descriptor-V2

Describes a Unidirectional or Bidirectional Packet Flow Descriptor Version 2. This attribute is also accepted in CoA request message to be used in a currently active subscriber session.

Length 4-1400

Type 26

Vendor ID 24757

VSA Type 84

Syntax Compound. Contains the following sub-attribute(s).

PDF-ID

Used to match all records from the same Packet Data Flow.

Syntax Unsigned integer

Length 2

Type 1

SDF-ID

Used to match all PDFs from the same Service Data Flow.

Syntax Unsigned integer

Length 2

Type 2

Service-Profile-ID

Identifies a pre-configured Flow Descriptor at the NAS.

Syntax Unsigned integer

Length 4

Type 3

Direction

Direction of the PDF.

Syntax Enumerated integer. Supported values are:

Uplink = 1
Downlink = 2
Bi-Directional = 3

Length 1

Type 4

Activation-Trigger

Specifies the trigger to be used for the activation of Service Flow.

Syntax Enumerated integer. Supported values are:

Provisioned = 0x01
Admit = 0x02
Activate = 0x04
Dynamic = 0x08

Length 1

Type 5

Transport-Type

Type of transport (IP, Ethernet).

Syntax Enumerated integer. Supported values are:

IPv4-CS = 1
IPv6-CS = 2
Ethernet = 3

Length 1

Type 6

Uplink-QoS-ID

Identifier of the QoS Descriptor for Uplink or Bidirection.

Syntax Unsigned integer

Length 1

Type 7

Downlink-QoS-ID

Identifier of the QoS Descriptor for Downlink.

Syntax Unsigned integer

Length 1

Type 8

WiMAX-Packet-Flow-Classifier

Describes Packet Flow Classifiers.

Type 9

Syntax Contains the following sub-attributes:

Classifier-ID

WiMAX Classifier ID.

Syntax Unsigned integer

Length 1

Type 1

Priority

WiMAX Classifier Priority.

Syntax Unsigned integer

Length 1

Type 2

Protocol

WiMAX Classifier Protocol, i.e TCP/UDP.

Syntax In StarOS 10.0 and earlier: Enumerated integer. Supported values are:

ICMP = 1
TCP = 6
UDP = 17

In StarOS 10.2 and later: Unsigned integer.

Length 1

Type 3

Direction

Direction of the PDF.

Syntax Enumerated integer. Supported values are:

Uplink = 1
Downlink = 2
Bi-Directional = 3

Length 4

Type 5

Inverted

WiMAX Classifier Inverted.

Syntax Enumerated integer. Supported values are:

FALSE = 0
TRUE = 1

Length 1

Type 6

Assigned

WiMAX Classifier Assigned.

Syntax Enumerated integer. Supported values are:

Src_Assigned = 1
Dest_Assigned = 2
Src_Dest_Assigned = 3

Length 1

Type 7

Destination-Specification

Identifies WiMAX classifier rule params for destination specification.

Syntax Contains the following sub-attribute(s):

Type 6

IP-Address

This attribute contains source/destination address.

Syntax IPv4 address

Length 4

Type 1

IP-Address-Range

WiMAX Packet Classifier IP Address Range.

Syntax Opaque value

Length 8

Type 2

IP-Address-Mask

WiMAX Packet Classifier IP Address Mask.

Syntax Opaque value

Length 5

Type 3

Port

WiMAX Packet Classifier Port.

Syntax Unsigned integer

Length 2

Type 4

Port-Range

WiMAX Packet Classifier Port Range.

Syntax Unsigned integer

Length 4

Type 5

Inverted

WiMAX Classifier Inverted.

Syntax Enumerated integer. Supported values are:

FALSE = 0
TRUE = 1

Length 1

Type 6

Assigned

WiMAX Classifier Assigned.

Syntax Enumerated integer. Supported values are:

Src_Assigned = 1
Dest_Assigned = 2
Src_Dest_Assigned = 3

Length 1

Type 7

IP-TOS-DSCP-Range-And-Mask

WiMAX Classifier WiMAX-IP-TOS-DSCP-Range-And-Mask.

Syntax Opaque value

Length 1-3

Type 7

Action

WiMAX Classifier Action.

Syntax Enumerated integer. Supported values are:

Reserved = 0
Permit = 1
Deny = 2

Length 1

Type 8

Paging-Preference

WiMAX Paging Preference.

Syntax Enumerated integer. Supported values are:

FALSE = 0
TRUE = 1

Length 1

Type 10

WiMAX-PDF-ID

The value of this attribute matches all records from the same packet data flow. PDFID is assigned by the CSN and remains constant through all handover scenarios.

Syntax Unsigned Integer

Length 2

Type 26

Vendor ID 24757

VSA Type 26

WiMAX-PPAC

The Prepaid-Accounting-Capability (PPAC) attribute is sent in the Access-Request message by a prepaid capable ASNGW, and is used to describe the prepaid capabilities of the ASNGW. The absence of this attribute indicates that the client is not capable of prepaid accounting and the session should not use prepaid accounting.

Type 26

Vendor ID 24757

VSA Type 35

Syntax Compound. Contains the following sub-attribute(s).

Available-In-Client

The optional Available-In-Client subtype, generated by the PPC, indicates the metering capabilities of the NAS and is be bitmap encoded.

Syntax Enumerated Integer. Supports the following value(s):

Supported_None = 0
Supported_Volume = 1
Supported_Duration = 2
Supported_Volume_And_Duration = 3
Supported_Tariff_Switch = 64
Supported_Volume_And_Duration_And_Tariff_Switch = 67

Length 4

Type 1

WiMAX-PPAQ

Prepaid Quota, used for charging, report usage, and request quota. This attribute specifies the characteristics for pre-paid accounting of the volume and/or duration of a packet data session. It should be present in all on-line RADIUS Access-Request and on-line RADIUS Access-Accept messages and may be included in other RADIUS Access-Accept messages. In Authorize-Only Access-Request messages, it is used for one-time charging, report usage and the request for further quota. In an Access-Accept message it is used in order to allocate the (initial and subsequent) quotas.

Reason for initiating online quota update operation. This should be present in the Authorize-Only RADIUS Access-Request message. It indicates the reason for initiating the on-line quota update operation. Update reasons 6, 7, 8, and 9 indicate that the associated resources are released at the client side, and that therefore the PPS should not allocate a new quota in the RADIUS Access-Accept message.

Syntax Enumerated Integer. Supports the following value(s):

Pre-Initialization = 1
Initial-Request = 2
Threshold-Reached = 3
Quota-Reached = 4
TITSU-Approaching = 5
Remote-Forced-Disconnect = 6
Client-Service-Termination = 7
Access-Service-Terminated = 8
Service-Not-Established = 9
One-Time-Charging = 10

Length 1

Type 8

Pre-Paid-Server

PrePaid server IP address. This optional subtype indicates the address IPv4 of the serving PPS. If present, the Home RADIUS server uses this address to route the message to the serving PPS. The attribute may be sent by the Home RADIUS server. Multiple instances of this subtype may be present in a single PPAQ. If present in the incoming RADIUS Access-Accept message, the ASNGW should send this attribute back without modifying it in the subsequent RADIUS Access-Request message.

Syntax IPv4 Address

Length 4

Type 9

Service-ID

This value is a string that uniquely describes the service instance to which prepaid metering should be applied.

Syntax Opaque Value

Length 1-246

Type 10

Rating-Group-ID

Rating-Group-ID for which the WiMAX PPAQ is allocated or reported.

Syntax Unsigned Integer

Length 4

Type 11

Termination-Action

Describes action to take when PPS does not grant additional quota.

Syntax Enumerated Integer. Supports the following value(s):

Reserved = 0
Terminate = 1
Request-more-quota = 2
Redirect/Filter = 3

Length 1

Type 12

WiMAX-Prepaid-Indicator

Indicates that this session was associated with a prepaid user (online accounting).

Syntax Enumerated Integer. Supports the following value(s):

Offline = 0
Online = 1

Length 1

Type 26

Vendor ID 24757

VSA Type 25

WiMAX-Prepaid-Tariff-Switch

Attribute to indicate Tariff-Switch-Interval / Time-Interval-After-Tariff-Switch-Update by the PPS and Volume-Used-After-Tariff-Switch by the PPC.

Length 6-700

QoS-ID

Unique ID for the QoS specification in the packet

Syntax Unsigned Integer

Length 1

Type 1

Global-Service-Class-Name

Specifies global service class name as defined in IEEE802.16e.

Syntax String

Length 6

Type 2

Service-Class-Name

Specifies service class name as defined in IEEE802.16e.

Syntax String

Length 2-127

Type 3

Schedule-Type

Specifies the uplink granted scheduling type.

Syntax Enumerated Integer. Supports the following value(s):

Best-Effort = 2
nrtPS = 3
rtPS = 4
Extended-rtPS = 5
UGS = 6

Length 1

Type 4

Traffic-Priority

Specifies the priority assigned to a service flow.

Syntax Unsigned Integer

Length 1

Type 5

Maximum-Sustained-Traffic-Rate

Specifies peak information rate of the service in bits/second.

Syntax Unsigned Integer

Length 4

Type 6

Specifies the application type, used as a hint in admission decisions.

Syntax Enumerated Integer. Supports the following value(s):

VoIP = 1
Robust-Browser = 2
Secure-Browser/VPN = 3
Streaming-Video-On-Demand = 4
Streaming-Live-TV = 5
Music-Photo-Download = 6
Multi-Player-Gaming = 7
Location-Based-Services = 8
Text-Audio-Books-With-Graphics = 9
Video-Conversation = 10
Message = 11
Control = 12
Data = 13

Length 2

Type 26

Vendor ID 24757

VSA Type 27

WiMAX-Session-Continue

The value of this attribute matches all records from the same packet data flow. SDFID is assigned by the CSN and remains constant through all handover scenarios.

Syntax Enumerated Integer. Supports the following value(s):

False = 0
True = 1

Length 4

Type 26

Vendor ID 24757

VSA Type 21

WiMAX-Session-Term-Capability

WiMAX session term capability. This attribute is included in a RADIUS Access-Request message to the RADIUS server and indicates whether or not the NAS supports Dynamic Authorization.

Syntax Enumerated Integer. Supports the following value(s):

Only_Dynamic_Auth_Extn_to_Radius = 0x00000001
Only_Reg_Revocation_in_MIP = 0x00000002
Both_Dynamic_Auth_And_Reg_Revocation_in_MIP = 0x00000003

Length 4

Type 26

Vendor ID 24757

VSA Type 36

Win-Call-Id

Customer-specific attribute used in custom dictionary. Contains opaque 1 byte value received from customer RADIUS server in access request.

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 5535

VSA Type 205

Win-Service-Name

Opaque value value received from customer RADIUS server in Access Request. Used in custom dictionary.

Syntax String

Length 0-256

Type 26

Vendor ID 5535

VSA Type 206

WSType

Opaque one byte value received from customer RADIUS server in Access Request.

Syntax Unsigned Integer

Length 4

Type 26

Vendor ID 5535

VSA Type 197

Bias-Free Language

Results

Chapter: RADIUS Dictionaries and Attribute Definitions

RADIUS Dictionaries and Attribute Definitions

RADIUS Dictionaries

Dictionary Types

RADIUS Attribute Notes

RFC 2868 Tunneling Attributes

RADIUS AVP Definitions

3GPP2-835-Release-Indicator

3GPP2-Acct-Session-Time

3GPP2-Active-Time-Corrected

3GPP2-Active-Time

3GPP2-Airlink-Record-Type

3GPP2-Airlink-Sequence-Number

3GPP2-Air-QOS

3GPP2-Allowed-Diffserv

Flags

Max-Class

RT-Marking

3GPP2-Allowed-Persistent-TFTs

3GPP2-Alternate-Billing-ID

3GPP2-Always-On

3GPP2-Auth-Flow-Profile-Id

Profile-Id-Forward

Profile-Id-Reverse

Profile-Id-Bi-Direction

3GPP2-Bad-PPP-Frame-Count

3GPP2-BCMCS-Auth-Parameters

BAK-Sequence-Number

Timestamp

Auth-Signature

3GPP2-BCMCS-BSN-Session-Info

Flow-Id

Mcast-IP-Addr

Mcast-Port

Header-Compression-Algorithm

CID-Type-Attribute

MAX-CID

Compression-Profile

MAX-Header-Size

MRRU

Content-Server-Source-IP-Address

Content-Server-Source-IPv6-Address

3GPP2-BCMCS-Capability

BCMCS-Protocol-Revision

3GPP2-BCMCS-Common-Session-Info

Flow-ID

Program-Start-Time

Program-End-Time

Program-Allowed-Registration-Time

Auth-Required-Flag

3GPP2-BCMCS-Flow-ID

3GPP2-BCMCS-Flow-Transmit-Time

3GPP2-BCMCS-Mcast-IP-Addr

3GPP2-BCMCS-Mcast-Port

3GPP2-BCMCS-Reason-Code

3GPP2-BCMCS-RN-Session-Info

Flow-ID

BCMCS-Encryption-Mechanism-Attribute

BCMCS-BAK-ID-Attribute

BCMCS-BAK

BCMCS-BAK-Expire-Time

BCMCS-Session-Bandwidth-attribute

3GPP2-Beginning-Session

3GPP2-BSID

3GPP2-Carrier-ID

3GPP2-Comp-Tunnel-Indicator

3GPP2-Container

3GPP2-Correlation-Id-Long

3GPP2-Correlation-Id-Old

3GPP2-Correlation-Id

3GPP2-DCCH-Frame-Size

3GPP2-Diff-Service-Class-Option

3GPP2-Disconnect-Reason

3GPP2-DNS-Server-IP-Address

Primary-DNS-Server-IP

Secondary-DNS-Server-IP

Flag