end
Exits the current configuration mode and returns to the Exec mode.
Product
All
Privilege
Security Administrator, Administrator
Syntax
end
Usage Guidelines
Use this command to return to the Exec mode.
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
Creates Global eNB and enters eNBG Group configuration mode.
Exec > Global Configuration > LTE Policy > eNB Group Service Configuration
configure > lte-policy > enbid-list enbid_list_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(enbid-list)#
Exits the current configuration mode and returns to the Exec mode.
All
Security Administrator, Administrator
end
Use this command to return to the Exec mode.
Exits the current mode and returns to the parent configuration mode.
All
Security Administrator, Administrator
exit
Use this command to return to the parent configuration mode.
the discrete eNB IDs
.
MME
Administrator
Exec > Global Configuration > LTE Policy Configuration > eNBID List
configure > lte-policy > enbid-list
Entering the above command sequence results in the following prompt:
[local]host_name(enbid-list)#
[ no ] enb-id discrete_eNB_id
Disables the configuration of discrete eNB IDs.
Specifies the discrete eNB IDs. discrete_eNB_id must be a Hexadecimal number between 0x1 and 0xFFFFFFF.
Range of discrete eNB IDs.
.
MME
Administrator
Exec > Global Configuration > LTE Policy Configuration > eNBID List
configure > lte-policy > enbid-list
Entering the above command sequence results in the following prompt:
[local]host_name(enbid-list)#
[ no ] enb-id-range from starting_eNB_id to ending_eNB_id
Disables the configuration of discrete eNB IDs.
Specifies the range of discrete eNB IDs.
Specifies the starting eNB ID in the range in Hexadecimal. starting_eNB_id must be a Hexadecimal number between 0x1 and 0xFFFFFFF.
Specifies the last eNB ID in the range in Hexadecimal. ending_eNB_id must be a Hexadecimal number between 0x1 and 0xFFFFFFF.