end
Exits the current configuration mode and returns to the Exec mode.
Product
All
Privilege
Security Administrator, Administrator
Syntax
end
Usage Guidelines
Use this command to return to the Exec mode.
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
The event report conn Configuration Mode is used to configure Global Mobile Positioning Center (GMPC) event report connection..
Exec > Global Configuration > Context Configuration > Interface Configuration > Event-Report-Conn Configuration
configure > context context_name > interface gmpc_interface_name event-report-conn
Entering the above command sequence results in the following prompt:
[context_name]gmpc_interface_name(event-report-conn)#
Important |
The commands or keywords/variables that are available are dependent on platform type, product version, and installed license(s). |
Exits the current configuration mode and returns to the Exec mode.
All
Security Administrator, Administrator
end
Use this command to return to the Exec mode.
Exits the current mode and returns to the parent configuration mode.
All
Security Administrator, Administrator
exit
Use this command to return to the parent configuration mode.
This command configures the destination IP address for the specific GMPC event report.
SGSN
MME
Security Administrator, Administrator
Exec > Global Configuration > Context Configuration > Event-Report-Conn Configuration
configure > context context_name event-report-conn event_report_conn_name
Entering the above command sequence results in the following prompt:
[local]host_name (config-contxt-event-report-conn)#
gmpc-event-report { dest-addr { ipv4_address | ipv6_address } dest-port port_number | src-addr {ipv4_address | ipv6_address } src-port port_number }
Removes or disassociates the configured event-report-conn name configuration.
Configure GMPC event report destination ip-address.
ipv4_address must be specified using the IPv4 dotted-decimal notation.
ipv6_address must be specified using the IPv6 dotted-decimal notation.
Configures the destination port to bind the GMPC event.
Port number must be an integer from 0 to 65535.
Configures gmpc-event-report source ip-address.
Configures the src-port address to bind the gmpc-event-report-conn.
Port number must be an integer from 0 to 65535.
Use of this configuration command is to create interface between MME/SGSNs and GMPC.
The following command configures the IP parameters for specific GMPC Event Report Connections:
event-report-conn_gmpc-event conn1 gmpc-event-report src-addr 209.165.200.226 src-port 32001
gmpc-event-report dest-addr 209.165.200.226dest-port 32001