Table of Contents
Release Notes for Cisco ASR 901 Series Aggregation Services Router for CiscoIOSRelease15.3(2)S2
Determining the Software Version
New Hardware Features in Release 15.3(2)S2
New Software Features in Release 15.3(2)S2
Modified Software Features in Release 15.3(2)S2
Release Notes for Cisco ASR 901 Series Aggregation Services Router for Cisco IOS Release 15.3(2)S2
This release notes is for the Cisco ASR 901 Series Aggregation Services Router for Cisco IOS Release 15.3(2)S2 and contains the following sections:
Introduction
The Cisco ASR 901 Series Aggregation Services Router is a cell-site access platform specifically designed to aggregate and transport mixed-generation radio access network (RAN) traffic. The router is used at the cell site edge as a part of a 2G, 3G, or 4G RAN.
The Cisco ASR 901 router helps enable a variety of RAN solutions by extending IP connectivity to devices using Global System for Mobile Communications (GSM), General Packet Radio Service (GPRS), Node Bs using High Speed Packet Access (HSPA) or Long Term Evolution (LTE), base transceiver stations (BTSs) using Enhanced Data Rates for GSM Evolution (EDGE), Code Division Multiple Access (CDMA), CDMA-2000, EVDO, or WiMAX, and other cell-site equipment.
It transparently and efficiently transports cell-site voice, data, and signaling traffic over IP using traditional T1 and E1 circuits, as well as alternative backhaul networks such as Carrier Ethernet and DSL, Ethernet in the First Mile (EFM), and WiMAX. It also supports standards-based Internet Engineering Task Force (IETF) Internet protocols over the RAN transport network, including those standardized at the Third-Generation Partnership Project (3GPP) for IP RAN transport. Custom designed for the cell site, the Cisco ASR 901 router features a small form factor, extended operating temperature, and cell-site DC input voltages.
Table 1 lists the Cisco ASR 901 router model versions.
Note Some of the Cisco ASR 901 models have port based licensing. For more details, see the Licensing chapter in Cisco ASR 901 Series Aggregation Services Router Software Configuration Guide.
System Specifications
Table 2 lists the supported system configurations for the Cisco ASR 901 router:
Memory Details
Table 2 lists the memory available for Cisco ASR 901 router.
New and Changed Information
- New Hardware Features in Release 15.3(2)S2
- New Software Features in Release 15.3(2)S2
- Modified Software Features in Release 15.3(2)S2
New Hardware Features in Release 15.3(2)S2
There are no new hardware features in Cisco IOS Release 15.3(2)S2.
New Software Features in Release 15.3(2)S2
There are no new software features in Cisco IOS Release 15.3(2)S2.
Modified Software Features in Release 15.3(2)S2
There are no modified features in Cisco IOS Release 15.3(2)S2.
Supported Hardware
Table 3 and Table 4 shows the SFP modules supported on the Cisco ASR 901 routers:
Table 3 SFPs Supported on the Cisco ASR 901 1G and 10G Routers for 1G Mode
Table 4 SFPs Supported on the Cisco ASR 901 10G Router for 10G Mode
Note For information on how to configure SFPs, see the Cisco ASR 901 Series Aggregation Services Router Software Configuration Guide.
Caveats
Caveats describe unexpected behavior in Cisco IOS software releases. Severity 1 caveats are the most serious caveats, severity 2 caveats are less serious, and severity 3 caveats are the least serious of these three severity levels. Only select severity 3 caveats are listed.
This section contains the following topics:
Using Bug Toolkit
The Caveats section only includes the bug ID and a short description of the bug. For details on the symptoms, conditions, and workaround for a particular bug you must use the Bug ToolKit. This section explains how to use the bug toolkit and has the following topics:
Search Bugs
This section explains how to use the Bug ToolKit to search for a specific bug.
Step 1 Go to http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl .
You are prompted to log into Cisco.com. After successful login, the Bug Toolkit page opens.
Step 2 Click Launch Bug Toolkit .
Step 3 To search for a specific bug, enter the bug ID in the Search for Bug ID field and click Go in the Search Bugs tab.
To search for bugs in a specific release, enter the following search criteria:
- Select Product Category—Select Routers .
- Select Products—Select the required product from the list. For example, to view bugs for Cisco ASR 901, choose Cisco ASR 901 Series Aggregation Services Router from the list.
- Software Version—Choose the required Cisco IOS version from the drop-down lists. For example, to view the list of outstanding and resolved bugs in Cisco IOS Release 15.3(2)S, choose 15.3 from the first drop-down list, 2 from the second drop-down list, and S from the third drop-down list.
- Search for Keyword(s)—Separate search phrases with boolean expressions (AND, NOT, OR) to search within the bug title and details.
- Advanced Options—You can either perform a search using the default search criteria or define custom criteria for an advanced search. To customize the advanced search, select Use custom settings for severity, status, and others and provide the following information:
– Severity—Select the severity level.
– Status—Select Open , Fixed , or Terminated .
Select Open to view all the open bugs. To filter the open bugs, clear the Open check box and select the appropriate sub-options that appear below the Open check box. The sub-options are New, Held, More, Open, Waiting, Assigned, Forwarded, Postponed, Submitted, and Information Required. For example, if you want to view only new bugs in Cisco IOS Release 15.3(2)S, select New .
Select Fixed to view fixed bugs. To filter fixed bugs, clear the Fixed check box and select the appropriate sub-options that appear below the Fixed check box. The sub-options are Resolved or Verified .
Select Terminated to view terminated bugs. To filter terminated bugs, clear the Terminated check box and select the appropriate sub-options that appear below the terminated check box. The sub-options are Closed , Junked , and Unreproducible . Select multiple options as required.
– Advanced—Select the Show only bugs containing bug details check box to view only those bugs that contain detailed information, such as symptoms and workarounds.
– Modified Date—Select this option if you want to filter bugs based on the date on which the bugs were last modified.
– Results Displayed Per Page—Select the appropriate option from the list to restrict the number of results that appear per page.
Step 4 Click Search . The Bug Toolkit displays the list of bugs based on the specified search criteria.
Save Bugs
This section explains how to use Bug ToolKit to save the bugs retrieved by your search in a specific release.
Step 1 Perform a search.
Repeat Step 1 through Step 3 in the “Search Bugs” section.Step 2 Select the check boxes next to the bug you want to save in the Search Results page and click Save Checked .
The Save Bug Settings area appears under the Search Bugs tab.
Step 3 Specify group settings in the Place in Group field.
Existing groups have their group notification options already set. If you select an existing group, go to Step 5.
Step 4 Specify the following email update (group notification) options.
- No emailed updates—Select if you do not want to receive email updates.
- Yes, email updates to—Enter your email address.
– On a schedule—Specify the frequency of email delivery.
The Bug ToolKit saves the selected bugs in the specified group.
Save Search
This section explains how to use Bug ToolKit to save your search after searching for the bugs in a specific release.
Step 1 Perform a search.
Repeat Step 1 through Step 3 in the “Search Bugs” section.Step 2 Click Save Search in the Search Results page to save your search with the specified criteria.
The Save Search Settings area appears under the My Notifications tab.
Step 3 Enter a name for your search in the Search Name field.
Step 4 Specify group settings in the Place in Group field.
Existing groups have their group notification options already set. If you select an existing group, go to Step 6.
Step 5 Specify the following email update (group notification) options.
- No emailed updates—Select if you do not want to receive email updates.
- Yes, email updates to—Enter your email address.
– On a schedule—Specify the frequency of email delivery.
The Bug ToolKit saves your search in the specified group.
Retrieve Saved Search or Bugs
This section explains how to use Bug ToolKit to retrieve a saved search or bugs.
Step 1 Go to http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl and click Launch Bug Toolkit .
You are prompted to log into Cisco.com.
Step 2 Click My Notifications tab.
My Notifications tab displays the Group Name, Summary, and Actions.Step 3 Click the group in the Group Name column. The group contains saved search and bugs.
Step 4 Retrieve saved search or bugs.
- Click the saved search name to display the Search Results page.
- Click the saved bug to display details or hover your mouse pointer over the Info link.
The My Notifications tab also provides option to delete bug, delete search, delete group, edit group notifications (in the Actions column), move selected saved search or bugs to different group, and to export saved bugs in all the groups to a spreadsheet.
Export to Spreadsheet
The Bug ToolKit provides the following options to export bugs to a spreadsheet:
- Click Export All to Spreadsheet link in the Search Results page under the Search Bugs tab. Specify file name and folder name to save the spreadsheet. All the bugs retrieved by the search is exported.
- Click Export All to Spreadsheet link in the My Notifications tab. Specify file name and folder name to save the spreadsheet. All the saved bugs in all the groups is exported.
If you are unable to export the spreadsheet, log into the Technical Support Website at
http://www.cisco.com/cisco/web/support/index.html for more information or call Cisco TAC (1-800-553-2447).Open Caveats
This section provides information about the open caveats for the Cisco ASR 901 router running Cisco IOS Release 15.3(2)S2.
Resolved Caveats
This section provides information about the resolved caveats for the Cisco ASR 901 router running Cisco IOS Release 15.3(2)S2.
Troubleshooting
The following sections describe troubleshooting commands you can use with the Cisco ASR 901 Series Aggregation Services Router.
Collecting Data for Router Issues
To collect data for reporting router issues, issue the following command:
Collecting Data for ROMMON Issues
To collect data for ROMMON issues, issue the following command while in the EXEC mode:
Note If you contact Cisco support for assistance, we recommend that you provide any crashinfo files stored in flash memory. For more information about crashinfo files, see http://www.cisco.com/en/US/products/hw/routers/ps167/products_tech_note09186a00800a6743.shtml.
Related Documentation
Documents related to the Cisco ASR 901 Series Aggregation Services Router include the following:
- Cisco ASR 901 Series Aggregation Services Router Hardware Installation Guide
- Cisco ASR 901 Series Aggregation Services Router Software Configuration Guide
- Regulatory Compliance and Safety Information for Cisco ASR 901 Series Aggregation Services Routers
- Cisco ASR 901 Series Aggregation Services Router Series MIB Specifications Guide
To access the related documentation on Cisco.com, go to:
http://www.cisco.com/en/US/partner/products/ps12077/tsd_products_support_series_home.html
Services and Support
For information on obtaining documentation, obtaining support, providing documentation feedback, security guidelines, and also recommended aliases and general Cisco documents, see the monthly What’s New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks . Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R)
Release Notes for Cisco ASR 901 Aggregation Series Router for Cisco IOS Release 15.3(2)S2