Debug Commands

connectorctl enabledebug

This command enables the debug mode for the Cisco Spaces: Connector.

Parameters

None.

connectorctl enabledebug

Usage Guidelines


[cmxadmin@cmxnew ~]$ connectorctl enabledebug
Please enter a Valid MAC Address [Format: xx:xx:xx:xx:xx:xx]: 00:0c:xx:xx:xx:xx
Please choose a debug level [Default: MESSAGE] [MESSAGE]: 
Debug enabled successfully: MESSAGE$

connectorctl viewdebuglogs

This command displays the debugs logs.

Parameters

None.

connectorctl viewdebuglogs

Usage Guidelines


[cmxadminQcmxadmin ~]$ connectorctl viewdebuglogs
Please enter the mac address:: 00:0c:xx:xx:xx:xx
2019-11-21 23:15:55 [nioEventLoopGroup-6-1] INFO com.cisco.cmx.nmsp.protomapping.MappingEngine - tenantld: "427"
macAddress: "00: 0c :xx: xx: xx : xx"
controllerlpAddress: "10.22.244.28"
messageld: 15
measurementNotification {
    tenantld: "427"
    tenantld: "427"
    macAddress: "00:0c:xx:xx:xx:xx"
    controllerlpAddress: "10.22.244.28"
    deviceCategory {
        deviceClass: TAGS_2
    }
    transmitPower {
        value: 19
    }
    apRssiMeasurements {
        entries {
            apMacAddress: "08 :cc: xx : xx : xx :xx"
            rssi: -29
            timestamp: 278

connectorctl disabledebug

This command disables the debug mode for the Cisco Spaces: Connector.

Parameters

None.

connectorctl disabledebug

Usage Guidelines


[cmxadmin@cmxnew ~]$ connectorctl disabledebug
Please enter a Valid MAC Address [Format: xx:xx:xx:xx:xx:xx]: 00:0c:xx:xx:xx:xx
Please choose a debug level [Default: MESSAGE] [MESSAGE]: 
Debug disabled successfully: MESSAGE$