Cisco Wireless LAN Controller System Message Guide 7.0.116.0

APF Messages
AUTOINST Messages
AVL Messages

APF AUTOINST and AVL System Messages

This chapter contains the following topics:

APF Messages

This section contains access point functionality (APF) messages.

Error Message    %APF-3-ACCTREQ_SEND_FAILED: Unable to send Radius Accounting Request 
for STA [hex]:[hex]:[hex]:[hex]:[hex]:[hex]. CallingSTA:[chars], 
CalledSTA:[chars]. [chars].

Explanation Unable to send a Radius Accounting Request.

Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %APF-1-ADDMOBILE_SEND_FAILED: Could not send the LWAPP Add Mobile 
command to the AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex] associated to Rogue AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex]. [chars].

Explanation Could not send the LWAPP Add Mobile command to AP,either due to internal error or due to AP validation failure .

Error Message    %APF-1-ADD_TO_BLACKLIST_FAILED: Unable to create exclusion-list entry 
for mobile [hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Explanation This is security alert. A mobile station was blacklisted but could not be added to the list due to internal error.

Error Message    %APF-6-AES_REQ_REJECT: Rejecting RSN request for unicast AES from 
mobile [hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Explanation Rejected RSN request from mobile, as 80211i security information element validation failed.

Recommended Action Check the WLAN configuration to which mobile is trying to associate. Resolve the configuration conflict.

Error Message    %APF-3-AID_UPDATE_FAILED: Error updating Association ID for REAP AP 
Client[hex]:[hex]:[hex]:[hex]:[hex]:[hex] - AID [int]

Explanation Failed to update Association ID for REAP AP client.

Error Message    %APF-6-AIRSPC_WARP_KCID: WARP KCID: 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Explanation WARP KCID AIRSPC.

Recommended Action No action is required.

Error Message    %APF-1-AP_AUTO_CONTAIN_MISCONFIGURED: Auto-containing misconfigured 
AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex] as per policy.

Explanation Validation of the configuration of the AP against 3rd party Trusted AP policy failed. Auto-containing is misconfigured for AP as per policy.

Error Message    %APF-3-AP_DESCP_EXCEEDED: AP group name or Description should not 
exceed 32 characters

Explanation AP group name or Description can not exceed 32 characters in length.

Recommended Action Please specify AP group name upto 32 characters in length.

Error Message    %APF-3-APF_WIRED_GUEST_CLIENT_CREATE_FAILURE: Unable to create wired 
guest client entry for [hex]:[hex]:[hex]:[hex]:[hex]:[hex].

Explanation Internal system error

Error Message    %APF-3-APF_SITE_WLAN_ENABLE_FAILS: enabling WLANs failed for AP 
[chars]

Explanation Enabling the WLANs on the AP failed.

Recommended Action Delete and re-create the AP group.

Error Message    %APF-3-APF_WIRED_GUEST_EXCLUDED_CLIENT: Received a packet from 
excluded wired guest client [hex]:[hex]:[hex]:[hex]:[hex]:[hex].

Explanation Internal system error

Error Message    %APF-3-APPLY_ACL_POLICY_FAILED: Could not Apply ACL Policy. [chars].

Explanation ACL policy can not be exceed 32 characters in length.

Recommended Action Please specify ACL Policy upto 32 characters in length.

Error Message    %APF-3-APPLY_OVERRIDE_FAILED: Msgdef (APPLY_OVERRIDE_FAILED, APF, 
LOG_ERR, (MSG_TRACEBACK), Could not Apply Override. 
[chars].Mobile:[hex]:[hex]:[hex]:[hex]:[hex]:[hex], SSID: [chars].

Explanation Could not apply wlan policy. Either the associating wlan was deleted or disabled.

Recommended Action Please check the status of associating WLAN.

Error Message    APF-0-APPLY_WLAN_POLICY_FAILED: Could not Apply WLAN Policy on mobile 
%02x:%02x:%02x:%02x:%02x:%02x. %s.

Explanation The system could not apply a WLAN policy on the following mobile.

Error Message    %APF-3-ASSLEN_DIFF_FROM_REASSLEN: Association WPA/RSN IE length [dec] 
is different from Reassociation IE length [dec]

Explanation WPA/RSN IE length in Reassociation request is different from WPA/RSN IE length in Association request.

Error Message    %APF-3-ASSOCREQ: [chars]

Explanation The validation of the capability field from an Association Request failed.

Error Message    %APF-6-ASSOCREQ_PARSE_FAILED: Error parsing Assoc Request from 
STA[hex]:[hex]:[hex]:[hex]:[hex]:[hex] -- IE Type [int], IE Length [int],dataLen 
[int]. [chars].

Explanation Error parsing Assoc Request from STA.

Recommended Action No action is required.

Error Message    %APF-4-ASSOCREQ_PROC_FAILED: Failed to process an association request 
from[hex]:[hex]:[hex]:[hex]:[hex]:[hex]. WLAN:[dec], SSID:[chars]. [chars].

Explanation Processing of association request from a mobile failed. The real reason for failure is specified in the message.

Error Message    %APF-4-ATIM_FRAM_DROP: Ignoring ATIM frame..

Explanation Currently system do not process 802.11 ATIM Frames.

Recommended Action No action is required.

Error Message    %APF-1-AUTH_FAILED: Authentication failure (status [dec]) from 
STA[hex]:[hex]:[hex]:[hex]:[hex]:[hex]. [chars].

Explanation An authentication failure from the STA has occured. Verify the WEP key.

Error Message    %APF-1-AUTHMOBILE_SEND_FAILED: Could not send the LWAPP Authenticate 
Mobile command to rogue AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex]  for mobile 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex]. [chars].

Explanation Could not send the LWAPP Authenticate Mobile command to rogue AP.

Error Message    %APF-3-AUTHMSG_SEND_FAILED: Unable to send Authentication message to 
STA [hex]:[hex]:[hex]:[hex]:[hex]:[hex]. [chars].

Explanation Unable to send an authentication message to a station.

Error Message    %APF-4-AUTO_CONTAIN_AP_NOT_SUPPORTED: Unable to add foreign access 
point[hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Explanation Error message generated during data validation of migrated data.

Recommended Action No action is required.

Error Message    %APF-3-AUTO_CONT_NOT_SUPPORTED: Auto-containment of [chars] is not 
supported. Disabling.

Explanation This msg can be result of data validation done after migration of data to newer software version.

Error Message    %APF-1-AUTO_ENABLE_DOT1XAKM: Auto-enabling 802.1x AKM for WLAN 
'[chars]'

Explanation If no Authentication Key Management is selected then 802.1x AKM selected as a default for WLAN.

Error Message    %APF-1-AUTO_ENABLE_WPA2_AES: Auto-enabling WPA2 AES for WLAN '[chars]'

Explanation If WPA2/RSN is enabled then default the cipher suite to AES, if nothing is selected for WLAN.

Recommended Action No action is required.

Error Message    %APF-1-AUTO_ENABLE_WPA_TKIP: Auto-enabling WPA TKIP for WLAN '[chars]'

Explanation If WPA is enabled then default the cipher suite to TKIP if nothing is selected for WLAN.

Recommended Action No action is required.

Error Message    %APF-2-BAD_PMK_CACHE_ENTRY: Found a bad PMK cache entry for 
Station:[hex]:[hex]:[hex]:[hex]:[hex]:[hex] deleting the entry

Explanation Internal system error

Error Message    %APF-3-BUILD_NETNAME_FAILED: Could not build valid network name -- 
using default

Explanation Could not build valid network name, using default as the network name.

Recommended Action No action is required.

Error Message    %APF-1-CAN_NOT_ASS_WITH_ROGUE_AP: Can not associate with [chars] Rogue 
AP.

Explanation Association failed with a Rogue AP.

Error Message    %APF-3-CCKM_CREATE_PTSKA_FAILED: Could not generate PTK from BTK 
stored. [chars].Mobile:[hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Explanation Could not generate PTK. Invalid unicast encryption policy for mobile station

Error Message    %APF-0-CHANGE_DOT11G_SUPP: 802.11g Support changing from [chars] to 
[chars]. APs will reload.

Explanation 802.11g Support changes. APs will reload.

Error Message    %APF-1-CHANGE_ORPHAN_PKT_IP: Changing orphan packet IP address for 
station[hex]:[hex]:[hex]:[hex]:[hex]:[hex] from [int].[int].[int].[int] 
--->[int].[int].[int].[int]

Explanation The system is changing orphan packet IP address for a station.

Error Message    %APF-1-CHANGE_ROGUE_STATE_FAILED: Can not change state on 
rogue[hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Explanation Can not change state on rogue.

Error Message    %APF-3-CHECK_EXT_SUPP_RATES_FAILED: Could not check extended supported 
rates. [chars]. Length :[dec]. Mobile MAC: [hex]:[hex]:[hex]:[hex]:[hex]:[hex].

Explanation Could not check extended supported rates. Verify data rate on client.

Recommended Action No action is required.

Error Message    %APF-3-CHECK_SUPP_RATES_FAILED: Could not check supported rates. 
[chars]. Length :[dec]. Mobile MAC: [hex]:[hex]:[hex]:[hex]:[hex]:[hex].

Explanation Could not check supported rates. Verify data rate on client.

Recommended Action No action is required.

Error Message    %APF-3-CLEAR_TKN_TABLE_ENTRY_FAILED: Trying to clean an empty token 
entry [dec]!.

Explanation Internal system error

Error Message    %APF-6-CONFIG_FILE_SAVED: Config file '[chars]' saved to flash.

Explanation Config file saved on flash.

Recommended Action No action is required.

Error Message    %APF-1-CONFLICT_IN_ASS_REQ: Conflicting Supported Rates in Association 
Request from[hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Explanation Conflicting Supported Rates in Association Request. Verify data-rate on mobile.

Error Message    %APF-3-CONVERT_HEX_KEY_FAILED: Could not convert Hex Key into Binary 
data. [chars].

Explanation Internal system error

Recommended Action Specify the WEP Hex Key again.

Error Message    %APF-5-COUNTRY_NOT_FOUND: Country '[chars]' not found in country 
database.

Explanation A particular country is not found in country database.

Error Message    %APF-3-CREATE_CCKM_REASS_RESPONSE_IE_FAILED: Could not build the CCKM 
Reassociation response IE.[chars]. Mobile: [hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Explanation Could not build the CCKM Reassociation response IE.

Error Message    %APF-3-CREATE_DOT11i_IE_FAILED: Could not create DOT11i Info element. 
[chars].

Explanation Internal system error

Error Message    %APF-3-CREATE_KCID_INFO_ELEMENT_FAILED: Could not create the KC-ID 
information element. [chars].

Explanation Internal system error

Error Message    %APF-3-CREATE_OVERRIDE_FAILED: Could not Create Override. 
[chars].Mobile:[hex]:[hex]:[hex]:[hex]:[hex]:[hex], SSID: [chars].

Explanation Could not Create Override.

Error Message    %APF-4-CREATE_PMK_CACHE_FAILED: Attempt to insert PMK to the key cache 
failed. [chars].Length: [dec]. Station:[hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Explanation Internal system error

Error Message    %APF-3-CREATE_SITE_WITH_NAME_FAILED: Cannot create site with reserved 
name '[chars]'

Explanation Illegal name for new site.

Recommended Action Re-specify name of new site.

Error Message    %APF-3-CREATE_VLAN_IP_INTERFACE_FAILED: Could not create a virtual IP 
interface for VLAN.[chars].

Explanation Could not create a virtual IP interface for VLAN due to config data conflict.

Explanation Check other WLANs and port config data.

Error Message    %APF-3-CREATE_WARP_ADV_IE_FAILED: Unable to create WARP ADVERTISEMENT 
IE

Explanation Internal system error

Error Message    %APF-3-CREATE_WARP_M_KCID_IE_FAILED: Unable to create WARP M-KCID IE

Explanation Unable to create WARP M-KCID IE.

Error Message    %APF-4-CREATE_WEP_CACHE_FAILED: Attempt to insert WEP key failed. 
[chars]. Recv Length: [dec], Send Length:[dec]. Station: 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex].

Explanation Attempt to insert WEP key failed.

Error Message    %APF-0-DISABLE_IPSEC_WLAN: Disabling Ipsec WLAN (id [dec], SSID 
'[chars]') [chars].

Explanation Disabling an Ipsec WLAN.

Error Message    %APF-3-DISABLE_UNSUPPORTED_FEATURE: Feature: [chars] found enabled, 
which is not supported by the country([chars]) configured. Disabling it.

Explanation A particular feature was found enabled, but is not supported by the country configured. Disabling it.

Error Message    %APF-3-DISABLE_WLAN_FAILED: Unable to disable WLAN [dec].

Explanation Unable to disable WLAN.

Error Message    %APF-1-DISCONECT_MOBILE_DUE_TO_WLAN_SWITCH: Disconnecting mobile 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] due to switch of WLANs from [dec] to [dec]

Explanation Disconnecting a mobile due to switch of WLAN.

Recommended Action This is a debug message only. No action is required.

Error Message    %APF-3-DOT11_AUTH_MODE_SET_FAILED: Could not set the 802.11 
autentication mode. [chars]. Mode: [dec] WLAN:[chars].

Explanation Could not set the 802.11 authentication mode.

Error Message    %APF-0-DOT11G_NOT_PERMITTED: 802.11g not permitted in configured 
country - disabling.

Explanation 802.11g not permitted in configured country - disabling.

Error Message    %APF-6-DOT11N_QOS_DISABLED_NOT_PERMITTED: 802.11n rates requires WMM 
- disabling 11n rates on WLAN

Explanation 802.11n rates requires WMM - disabling 11n rates on WLAN

Error Message    %APF-4-DOT1P_TAGS: Dot1P Tags [chars] for all APs connected to this 
switch

Explanation Dot1P Tags for all APs connected to a switch.

Error Message    %APF-6-DOT1X_REQ_REJECT: Rejecting request for 802.1x on port [dec] 
from mobile[hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Explanation Rejecting request for 802.1x on a port from a mobile.

Recommended Action No action is required.

Error Message    %APF-3-ENABLE_WLAN_FAILED: Unable to enable WLAN [dec].

Explanation Unable to enable WLAN.

Error Message    %APF-3-ENCRYPTPOLICY_NOT_FOUND: Unable to find Encryption Policy for 
Mobile: [hex]:[hex]:[hex]:[hex]:[hex]:[hex]. Traffic Type:[chars], Security 
Method:[chars].

Explanation Unable to find Encryption Policy for a particular mobile station entry.

Error Message    %APF-1-FOREIGNAP_NOT_FOUND: Unable to locate foreign AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex]for [chars].

Explanation Unable to locate foreign AP.

Error Message    %APF-3-GET_CURR_RSSI_FAILED: Could not get mos recent RSSI and its 
timestamp. [chars].

Explanation Could not get most recent RSSI and its timestamp.

Error Message    %APF-3-GET_MULTI_ENC_POL_FAILED: Could not Get Multicast Encryption 
Policy. [chars].WPA2:[dec].

Explanation Could not Get Multicast Encryption Policy.

Error Message    %APF-3-GET_SECURITY_POLICY_FAILED: Could not get security policy. 
[chars]. WLAN: [chars]

Explanation Could not get security policy.

Error Message    %APF-3-GET_TKN_BKT_FAILED: Could not get Token Bucket Entry. [chars].

Explanation Could not get Token Bucket Entry.

Error Message    %APF-6-GUEST_ASSIGNED_IP: Guest User ([chars]) with MAC Address 
([hex]:[hex]:[hex]:[hex]:[hex]:[hex]) assigned IP Address 
([int].[int].[int].[int])

Explanation IP address assigned to guest user.

Recommended Action This is a debug message only. No action is required.

Error Message    %APF-3-GUEST_INIT_FAILED: Could not Create [chars]

Explanation Wired Guest Init failed.

Error Message    %APF-1-HANDOFF_END_RCVD: Handoff end received[chars] (peer Ip: 
[dec].[dec].[dec].[dec], sender:[dec].[dec].[dec].[dec], Role:[dec]) for mobile 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Explanation Handoff end rcvd for a mobile.

Error Message    %APF-4-IGNORE_IDLE_TIMEOUT: Ignoring Idle-Timeout event from the NPU 
for STA [hex]:[hex]:[hex]:[hex]:[hex]:[hex] associated to REAP 
AP[hex]:[hex]:[hex]:[hex]:[hex]:[hex]([int])

Explanation Ignoring Idle-Timeout event from the NPU for STA which is associated to REAP AP.

Error Message    APF-0-INVALID_ACTION_CATEGORY: Could not process 802.11 Action. %s. 
Mobile:%s, Category:%d.

Explanation The system could not process an 802.11 action frame. The system does not support the action category code.

Error Message    %APF-1-INVALID_AUTH_MSG_LEN: Invalid authenticate message length.

Explanation Invalid authenticate message length.

Error Message    %APF-1-INVALID_AUTH_SEQ_NUM: Invalid authentication sequence number.

Explanation Invalid authentication sequence number.

Error Message    %APF-3-INVALID_CAC: Invalid Admission control ([dec]) specified for 
station [hex]:[hex]:[hex]:[hex]:[hex]:[hex] on 
AP[hex]:[hex]:[hex]:[hex]:[hex]:[hex] slotId [dec]

Explanation Invalid Admission control is specified for a station.

Error Message    %APF-3-INVALID_CONF_CHANNEL: Invalid configured channel on AP [chars].

Explanation Invalid configured channel on AP.

Error Message    %APF-3-INVALID_DOT11_ENCRPT_MODE: Invalid 802.11 encryption mode 
([dec]) provided for WLAN [chars]

Explanation Invalid 802.11 encryption mode is provided for WLAN.

Error Message    %APF-1-INVALID_ENC_POL_SET: Invalid encryption policy set for [chars].

Explanation Invalid encryption policy is set.

Error Message    %APF-3-INVALID_ENCRYPT_POLICY: Invalid Encryption Policy ([dec]) set 
for [chars] WLAN.

Explanation Invalid Encryption Policy is set for WLAN.

Error Message    %APF-0-INVALID_FRAME_LEN: Frame length out of bounds: [dec].

Explanation Frame length is out of bounds.

Error Message    %APF-4-INVALID_INFO_ELEMENT_LEN: Invalid SSID Information Element 
length in probe request from [chars].

Explanation Invalid SSID Information Element length in probe request.

Error Message    APF-0-INVALID_IP: AP ip address is not valid. Discarding packet to AP.

Explanation The packet is discarded because the IP address of access point is invalid or zero.

Error Message    %APF-3-INVALID_MAC_FILTER_DMTR_SETTING: Invalid MAC filter delimiter 
setting for mobile [hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Explanation Invalid MAC filter delimiter is set for mobile.

Error Message    %APF-1-INVALID_MOB_STATION_STATE: Invalid mobile station state - 
unable to expire [hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Explanation Invalid mobile station state - unable to expire.

Error Message    %APF-3-INVALID_MTU: Invalid MTU ([int]) Discarding packet to AP 
[dec].[dec]:[dec].[dec] ([dec])

Explanation Could not send packet to AP because the specified MTU is out of allowed range.

Error Message    %APF-4-INVALID_RADIO_CONFIG: Invalid configuration found for [chars] 
radio. [chars].

Explanation Invalid configuration found for a radio.

Error Message    %APF-3-INVALID_RADIO_TYPE: Invalid radio type [dec] received.

Explanation Invalid radio type is received.

Error Message    %APF-6-INVALID_RSN_IE_CAPABILITY: Received an invalid RSN IE 
capability. [chars].

Explanation Received an invalid RSN IE capability.

Recommended Action No action is required.

Error Message    %APF-3-INVALID_SEC_BIT: Invalid security bit [hex] provided for WLAN 
[chars]

Explanation Invalid security bit is provided for WLAN.

Error Message    %APF-3-INVALID_SEC_COMBINATION: Cannot configure export anchor when 
IPv6 is enabled.

Explanation IPv6 and Export Anchors cannot be enabled on a WLAN simultaneously.

Recommended Action Please disable IPv6 if export anchors need to be added to the WLAN configuration.

Error Message    %APF-3-INVALID_SEC_POL: Invalid Security Policy [hex] ([chars])

Explanation Invalid Security Policy.

Error Message    %APF-4-INVALID_STAAPL_IE: Received invalid STA APL IE from STA 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Explanation Received invalid STA APL IE from a STA.

Error Message    %APF-1-INVALID_STATUS_CODE: Invalid status code in authenticate 
message.

Explanation Invalid status code in authenticate message.

Error Message    APF-0-LIST_MAX_IDX_ERR: Unable to delete client entry, index (%d) is 
greater than maximum allowed.

Explanation The system is unable to delete an entry in the client table due to an internal error.

Error Message    %APF-3-LOCALHANDOFF: [chars]

Explanation Internal system error

Error Message    %APF-3-MAKE_CHANGE_DOT11A_FAILED: Attempting to make changes to 
802.11A while active.

Explanation Attempting to make changes to 802.11A while active.

Error Message    %APF-3-MAKE_CHANGE_DOT11B_FAILED: Attempting to make changes to 
802.11B while active.

Explanation Attempting to make changes to 802.11B while active.

Error Message    %APF-6-MIGRATE_CONFIG: Migrating [chars] Config from Version [dec] to 
Version [dec]

Explanation Migrating Config from Version to Version.

Recommended Action No action is required.

Error Message    %APF-1-MM_ANCHOR_DENIED: Anchor denied for mobile: 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex].

Explanation Anchor denied for a mobile.

Error Message    %APF-1-MOBILE_ADD_FAILED: Unable to add mobile 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] to PEM module.

Explanation Policy Enforcement module rejected the request to add the mobile station.

Error Message    %APF-3-MOBILE_ANNOUNCE_CLSN: Announce collision for 
mobile[hex]:[hex]:[hex]:[hex]:[hex]:[hex], deleting.

Explanation Announced collision and delete the mobile.

Error Message    %APF-6-MOBILE_CONF_ON_CTRL: Mobile 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] is not doing CKIP KP,which is configured on 
controller.

Explanation Mobile is not doing CKIP KP, which is configured on controller

Recommended Action No action is required.

Error Message    %APF-6-MOBILE_DOING_CCKM: Mobile [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 
is doing CCKM.

Explanation Mobile is doing CCKM.

Recommended Action No action is required.

Error Message    %APF-6-MOBILE_DOING_CKIP: Mobile [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 
is doing CKIPMMH-MIC, which is not configured on controller.

Explanation Mobile is doing CKIP MMH-MIC, which is not configured on controller

Recommended Action No action is required.

Error Message    %APF-1-MOBILE_ENTRY_CREATE_FAILED: Could not create Mobile Station 
Entry. [chars]. Mobile:[hex]:[hex]:[hex]:[hex]:[hex]:[hex], Type: [chars]. Mobile 
rejected.

Explanation Could not create Mobile Station Entry.

Error Message    %APF-1-MOBILE_ENTRY_NAC_STATE_SET_FAILED: Could not set NAC state for 
Mobile Station Entry. [chars]. Mobile:[hex]:[hex]:[hex]:[hex]:[hex]:[hex].

Explanation Could not set NAC state for mobile.

Error Message    %APF-6-MOBILE_EXCLUDED: Excluded the mobile 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex].

Explanation Set the station on the exclusion list.

Recommended Action No action is required.

Error Message    %APF-1-MOBILE_LOCATION_UPDATE_FAILED: Could not update the mobile 
station location. [chars].AP:[chars]. Port:[dec]. Config:[dec].

Explanation Could not update the mobile station location.

Error Message    %APF-1-MOBILE_NOT_AUTH: Mobile Station has not authenticated.

Explanation Mobile Station has not authenticated.

Error Message    %APF-6-MOBILE_NOT_CONF_ON_CTRL: Mobile 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] is doing CKIP KP,which is not configured on 
controller.

Explanation Mobile is doing CKIP KP, which is not configured on controller.

Recommended Action No action is required.

Error Message    %APF-3-MOBILE_NOT_DOING_CCKM: Mobile entry in cache is not doing CCKM 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Explanation Mobile entry in cache is not doing CCKM.

Error Message    %APF-6-MOBILE_NOT_DOING_CKIP: mobile 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] is not doing CKIPMMH-MIC, which is configured 
on controller.

Explanation mobile is not doing CKIP MMH-MIC, which is configured on controller.

Recommended Action No action is required.

Error Message    %APF-6-MOBILE_NOT_EXCLUDED: Could not exclude the mobile 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex].

Explanation Could not exclude a particular mobile. Either mobile is already in exclusion-list or excluding may be disabled for this specific mobile. Alternatively, the exclusion reason may be disabled.

Recommended Action No action is required.

Error Message    %APF-4-MOBILESTATION_NOT_FOUND: Could not find the mobile 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] in internal database

Explanation Could not find a particular mobile station in internal database

Recommended Action No action is required.

Error Message    %APF-1-MOVED_ADHOC_CLIENT_TO_AUTOCONTAIN: Moved adHoc client [chars] 
to auto-contained state.

Explanation Moved adHoc client to auto-contained state.

Error Message    %APF-1-MOVED_AP_TO_AUTOCONTAIN: Moved AP [chars] to auto-contained 
state.

Explanation Moved AP to auto-contained state.

Error Message    APF-0-MSCB_DB_IDX_INVALID: Client internal database is corrupted. %d 
index is invalid.

Explanation The client internal database has become corrupted.

Error Message    %APF-3-MSCB_DEL_FAILED: Unable to delete the MSCB entry 
([hex]:[hex]:[hex]:[hex]:[hex]:[hex]) from [chars] list.

Explanation Unable to delete the MSCB entry from list.

Error Message    %APF-3-MSGFAC: State change received for an unsupported radio type.

Explanation State change received for an unsupported radio type.

Error Message    %APF-3-NAME_PTR_MISSING: Missing ACL name pointer.

Explanation Missing ACL name pointer.

Error Message    %APF-6-NO_CONFIG_CHANGES: Not saving '[chars]' - no config changes.

Explanation Not saving - no config changes.

Recommended Action No action is required.

Error Message    %APF-1-NOT_ADV_SSID_ON_AP: Not advertising SSID [chars] on AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] due to [chars].

Explanation Not advertising SSID on AP.

Error Message    %APF-4-NOT_ADV_SSID_ON__AP: Not advertising SSID [chars] on AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] due to [chars].

Explanation Not advertising SSID on AP.

Error Message    %APF-1-NOT_ADV_SSID_ON_REAP_AP: Not advertising SSID [chars] on REAP 
AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex] due to [chars].

Explanation Not advertising SSID on REAP AP.

Error Message    %APF-0-NOTIFICATION_TIMER_NOT_CREATED: [chars] Could not create 
Apf-Locp Notification timer...

Explanation Could not create APF-LOCP Notification timer.

Error Message    %APF-4-NOTIFMSG_PROC_FAILED: Failed to process a notification message 
(MsgLen=[int],Tag=[int],TagLen=[int]). [chars].

Explanation Failed to process a notification message.

Error Message    %APF-6-NULL_DATA_IN_ADDTS_REQ: NULL data in ADD TS Request from STA 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] -- dataLen [int]

Explanation NULL data in ADD TS is Request from STA.

Recommended Action No action is required.

Error Message    %APF-4-OLD_ACE_RCL_IE_PRESENT: Old ACE RCL IE is present in mscb for 
station [hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Explanation Old ACE RCL IE is present in mscb for a station.

Error Message    %APF-4-PARSE_BSN_PKT_FAILED: Could not parse Bsn Packet. 
Reason:[chars].

Explanation Could not parse Bsn Packet.

Error Message    %APF-4-PARSE_ETH0VIP_PKT_FAILED: Could not parse Eth0vIP Packet. 
Reason:[chars].

Explanation Could not parse Eth0vIP Packet.

Error Message    %APF-4-PARSE_NPU_PKT_FAILED: Could not parse NPU Packet. 
Reason:[chars].

Explanation Could not parse NPU Packet.

Error Message    %APF-3-PDU_ENCAP_FAILED: Failed to encapsulate a PDU for transmission 
to station[hex]:[hex]:[hex]:[hex]:[hex]:[hex]. [chars].

Explanation Failed to encapsulate a PDU for transmission to station.

Error Message    %APF-4-PKT_LEN_MORE_THAN_MAXDOT11MTU: Packet length [dec] greater than 
max 802.11 MTU

Explanation Packet length is greater than max 802.11 MTU.

Error Message    APF-0-PROBEREQ_PARSE_FAILED: Error parsing Probe Request from 
STA%02x:%02x:%02x:%02x:%02x:%02x -- %s=%u,dataLen %u. %s.

Explanation The STA has sent an error parsing probe request.

Recommended Action None.

Error Message    %APF-4-PROC_ACTION_FAILED: Could not process 802.11 Action. [chars]. 
Mobile:[chars].

Explanation Could not process 802.11 Action.

Error Message    %APF-4-PROC_ASS_RADIUS_RES_FAILED: Could not Process Association after 
RADIUS response.[chars].

Explanation Could not Process Association after RADIUS response.

Error Message    %APF-1-PROC_CLIENT_ASS_RES_FAILED: Could not process client 
association response. [chars].

Explanation The system could not process a client association response.

Error Message    %APF-4-PROC_DOT11_MAC_MGMT_DATA_FAILED: Could not Process 802.11 MAC 
mgmt Data. [chars].

Explanation Could not Process 802.11 MAC mgmt Data.

Error Message    %APF-6-PROCESS_WME_ADDTS_REQ_FAILED: Could not Process the WME ADDTS 
Command. [chars].STA:[hex]:[hex]:[hex]:[hex]:[hex]:[hex] -- IE Tpye:[int]. 
IELength:[int].DataLen: [int]

Explanation Could not Process the WME ADDTS Command.

Recommended Action No action is required.

Error Message    %APF-1-PROC_INSTALL_ORPHAN_IPADD_FAILED: Could not install the Orphan 
Packet IP address. [chars].STA:[hex]:[hex]:[hex]:[hex]:[hex]:[hex]. Orphan 
PktIP:[int].[int].[int].[int]. Framed IP:[int].[int].[int].[int].

Explanation Could not install the Orphan Packet IP address.

Error Message    %APF-1-PROC_MM_RES_FAILED: Could not process MM response. 
[chars].Mobile:[hex]:[hex]:[hex]:[hex]:[hex]:[hex].

Explanation Could not process MM response.

Error Message    %APF-4-PROC_ORPHAN_MSG_DS_FAILED: Could not process frames received 
for unknown mobile from the DS. [chars].

Explanation Could not process frames received for unknown mobile from the DS.

Error Message    %APF-4-PROC_RADIUS__ASS_RES_FAILED: Could not process RADIUS 
association response. [chars].State: [dec] [hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Explanation Could not process RADIUS association response.

Recommended Action No action is required.

Error Message    %APF-1-PROC_RSN_WARP_IE_FAILED: Could not process the RSN and WARP 
IEs. [chars].MobileStation: [hex]:[hex]:[hex]:[hex]:[hex]:[hex], SSID:[chars].

Explanation Could not process the RSN and WARP IEs.

Error Message    %APF-6-PSK_REQ_REJECT: Rejecting request for PSK on port [dec] from 
mobile [hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Explanation Rejecting request for PSK on a port from a mobile.

Recommended Action No action is required.

Error Message    %APF-3-PUT_CHANGE_ON_QUEUE_FAILED: Could not put link state changes on 
the queue. [chars].

Explanation Could not put link state changes on the queue.

Error Message    %APF-3-PWR_TRAP_SEND_FAILURE: Could not send trap for power change 
event on AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Explanation Internal system error

Error Message    %APF-3-QOSLOAD_DEL_FAILED: Unable to remove AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex]([dec]) from QOS load.

Explanation Unable to remove AP from QOS load.

Error Message    %APF-1-QUARANTINE_VLAN: Quarantine VLAN, force it to central switch 
for mobile [hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Explanation Quarantine VLAN, force it to central switch for a mobile.

Error Message    %APF-0-QUEUE_NOT_FOUND: [chars] Queue is not created yet.

Explanation Queue is not created yet.

Error Message    %APF-6-RADIUS_OVERRIDE_DISABLED: Radius overrides disabled, ignoring 
source [int]

Explanation Radius overrides disabled.

Recommended Action No action is required.

Error Message    %APF-4-RCV_ACTION_FRM_WITH_CODE: Received Action frame with code [dec] 
from mobile station [chars]

Explanation Received a Action frame with code from a mobile station.

Recommended Action No action is required.

Error Message    %APF-3-RCV_ASS_RREQ: We've received an Association request - must have 
been an error.

Explanation The system has received an Association request due to an an error.

Error Message    %APF-1-RCV_CORRUPT_PKT: Received a corrupted packet from 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] - DOS?.

Explanation Received a corrupted packet.

Error Message    %APF-4-RCV_INVALID_ACTION_CODE: Received invalid action code [dec] 
from mobile station [chars]

Explanation Received an invalid action code from a mobile station.

Recommended Action No action is required.

Error Message    %APF-3-RCV_INVALID_AP_STATE: Received an invalid state for 
AP[hex]:[hex]:[hex]:[hex]:[hex]:[hex] slot [dec]

Explanation Received an invalid state for AP.

Error Message    %APF-4-RCV_INVALID_ARLDP_PKT: Received invalid ARLDP packet (received 
[dec] bytes, expected[dec]).

Explanation Received an invalid ARLDP packet.

Recommended Action No action is required.

Error Message    %APF-1-RCV_INVALID_DOT1P_PRTY_TAG: Received an invalid 802.1p ([dec]) 
from RADIUS for[hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Explanation Received an invalid 802.1p from RADIUS.

Error Message    %APF-1-RCV_INVALID_DSCP: Received an invalid DSCP ([dec]) from RADIUS 
for[hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Explanation Received an invalid DSCP from RADIUS.

Error Message    %APF-1-RCV_INVALID_MOBILITY_MSG: Received an invalid mobility message 
for[hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Explanation Received an invalid mobility message.

Error Message    %APF-1-RCV_INVALID_QOS_LEVEL: Received an invalid QoS Level ([dec]) 
from RADIUS for[hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Explanation Received an invalid QoS Level from RADIUS.

Error Message    %APF-4-RCV_INVALID_SUPP_RATE: RLDP: received a message with an invalid 
supported rate.

Explanation RLDP: received a message with an invalid supported rate.

Recommended Action No action is required.

Error Message    %APF-1-RCV_MOBILITY_RES: Received Mobility response for mobile 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] as anchor while in the wrong state.

Explanation Received Mobility response for a mobile as anchor while in the wrong state.

Error Message    %APF-4-RCV_PROBE_RESP: We've received a probe response - must have been 
an error.

Explanation We've received a probe response - must have been an error.

Recommended Action No action is required.

Error Message    %APF-3-RCV_UNKNOWN_MSG_TYPE: Unknown message type [dec] received.

Explanation Unknown message type is received.

Error Message    %APF-4-RCV_UNSUPP_MGMT_MSG: Received an unsupported 802.11 management 
messagesubType[dec] from AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Explanation Received an unsupported 802.11 management messagesubType from AP.

Recommended Action No action is required.

Error Message    %APF-3-RCV_UNSUPP_MSG: Rogue Task: Received unsupported message [dec].

Explanation Rogue Task: The System has received an unsupported message.

Error Message    %APF-3-RCV_UNSUPPORTED_MES: Received unsupported message [dec].

Explanation Received an unsupported message.

Error Message    APF-0-RLDP_SCHED_START_FAILED: Unable to start the RLDP Scheduling. 
%s.

Explanation The system is unable to start the RLDP scheduling task.

Error Message    %APF-1-REGISTER_IPADD_ON_MSCB_FAILED: Could not Register IP Add on 
MSCB. [chars]. Address:[hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Explanation Could not register an IP address on MSCB.

Error Message    %APF-1-RETRIEVE_CKIP_ENC_POL_FAILED: Could not retrieve the CKIP 
unicast encryption policy.[chars]. Size: [dec].

Explanation Could not retrieve the CKIP unicast encryption policy.

Error Message    %APF-4-ROGUE_AP_ADD_FAILED: Failed to add the rogue AP [chars]. 
[chars].

Explanation Failed to add a rogue AP. This error may be due to too many rogue APs detected in the system.

Error Message    %APF-1-ROGUE_AP_CONTAIN_FAILED: Unable to contain rogue [chars]. 
[chars].

Explanation Unable to contain a rogue.

Error Message    %APF-1-ROGUE_AP_DEL_FAILED: Rogue AP entry deletion failed.

Explanation A rogue AP entry deletion has failed.

Error Message    %APF-1-ROGUE_CLIENT_CONTAIN_FAILED: Unable to contain rogue client 
[chars]. [chars].

Explanation Unable to contain a rogue client.

Error Message    %APF-1-ROGUE_CLIENT_UPDATE_FAILED: Could not update rogue AP [chars] 
with rogue client [chars]information.

Explanation Could not update a rogue AP with the rogue client information.

Error Message    APF-0-SEM_CREATE_ERR: Could not create semaphore for %s.

Explanation The system is unable to allocate a lock for handling operations on the internal database, which could lead to data corruption. The system may become unstable.

Error Message    %APF-1-SEND_ASSOC_REQ_FAILED: Could not send a Client Association 
request. [chars].

Explanation Could not send an association request.

Error Message    %APF-1-SEND_ASSOC_RESP_FAILED: Could not send a Client Association 
response to [hex]:[hex]:[hex]:[hex]:[hex]:[hex]. [chars].

Explanation The system could not send an association response.

Error Message    %APF-1-SEND_CLIENT_ASS_REQ_FAILED: Could not send client association 
request. [chars].

Explanation Could not send a client association request.

Error Message    %APF-3-SEND_IGMP_QUERY_FAILED: Failed to send IGMP Query for roamed 
mobile [hex]:[hex]:[hex]:[hex]:[hex]:[hex].

Explanation A mobile can roam across subnets while listening to a multicast stream. When it roams across WLCs, the multicast traffic has to reach the WLC that the mobile is attached to. The WLC sends an IGMP query to the mobile, and the WLC has failed to send this IGMP query.

Error Message    %APF-1-SEND_PROBE_REQ_FAILED: Could not send a Client Probe request. 
[chars].

Explanation Could not send a probe request.

Error Message    %APF-1-SEND_PROBE_RESP_FAILED: Could not send a Probe Response. 
[chars].

Explanation Could not send a probe response.

Error Message    %APF-1-SEND_RADIUS_REQ_FAILED: Could not send RADIUS Request. 
[chars].Mobile:[hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Explanation Could not send a RADIUS request.

Error Message    %APF-1-SEND_ROGUE_CLIENT_RADIUS_REQ_FAILED: Could not send Rogue 
Client RADIUS Request. [chars]. Client: to [hex]:[hex]:[hex]:[hex]:[hex]:[hex].

Explanation Could not send a rogue client RADIUS request.

Error Message    %APF-3-SET_AUTH_KEY_MGMT_MODE_FAILED: Could not set the WPA/WPA2 auth 
key management mode.[chars]. Siute: ([hex]). WLAN:[chars]

Explanation Could not set the WPA/WPA2 auth key management mode.

Error Message    %APF-3-SET_DOT11A_RATE_FAILED: Could not set the 802.11A operational 
rate. [chars].

Explanation Could not set the 802.11A operational rate.

Error Message    %APF-3-SET_DOT11B_RATE_FAILED: Could not set the 802.11B operational 
rate. [chars].

Explanation Could not set the 802.11B operational rate.

Recommended Action Verify the operational rate. Only 1,2,5.5,11M are supported

Error Message    %APF-3-SET_DOT11g_SUPP_FAILED: Could not set the 802.11g support. 
[chars].

Explanation Could not set the 802.11g support.

Recommended Action Change the configuration.

Error Message    %APF-3-SET_FAST_ROAM_FAILED: Attempting to enable fast-roaming while 
Pico-Cell mode is enabled!

Explanation The system is attempting to enable fast roaming while the Pico-Cell mode is enabled.

Recommended Action Disable Pico-Cell mode, before enabling fast roaming.

Error Message    %APF-3-SET_MSCB_MIRROR_FAILED: Unable to set mirroring for MSCB.

Explanation Unable to set mirroring for MSCB.

Error Message    %APF-3-SET_PICO_CELL_FAILED: Attempting to enable pico-cell while 
[chars] is enabled.

Explanation Attempting to enable a pico-cell while it is enabled.

Error Message    %APF-3-SET_PICO_CELLV2_FAILED: Attempting to enable pico-cell-V2 while 
[chars] is enabled.

Explanation Attempting to enable a pico-cell-V2 while it is enabled.

Error Message    %APF-1-SET_PSK_AUTH_MODE: Could not set the 802.11i PSK authentication 
mode.[chars]. Length:[int]. WLAN:[chars].

Explanation Could not set the 802.11i PSK authentication mode.

Error Message    %APF-3-SET_RSN_ENABLE_FAILED: Could not Enable the RSN IE. 
[chars].Mode: [dec].WLAN:[chars].

Explanation Could not enable the RSN IE.

Error Message    %APF-3-SET_SSN_ENABLE_FAILED: Could not Enable the SSN IE. [chars]. 
Mode:[dec]. WLAN:[chars].

Explanation Could not enable the SSN IE.

Error Message    %APF-3-SET_VAP_SECURITY_POL_WORD_FAILED: Error Setting Security 
Policy Bit [hex] (Current Policy [hex], Policy Change [hex], mode [int])

Explanation An error has occured while setting the security policy bit.

Error Message    %APF-3-SET_VAP_STATUS_FAILED: Could not Set the Status of Virtual 
Access point Entry.[chars].Static WEP:[int].Dynamic WEP:[int]. WLAN:'[chars]'

Explanation Could not set the status of the virtual access point entry.

Error Message    %APF-3-SET_VPN_AH_MODE_FAILED: Could not set the mode: [dec]. [chars].

Explanation Could not set the VPN AH mode.

Error Message    %APF-3-SET_VPN_AUTH_MODE_FAILED: Could not set the VPN authentication 
mode. [chars].Mode:[dec]. WLAN: [chars].

Explanation Could not set the VPN authentication mode.

Recommended Action Specify the VPN authentication mode again.

Error Message    %APF-3-SET_VPN_ENC_MODE_FAILED: Could not set the VPN Encryption Mode. 
[chars].Mode: [dec].WLAN:[chars].

Explanation Could not set the VPN Encryption Mode.

Recommended Action Please re-specify the VPN Encryption Mode.

Error Message    %APF-3-SET_VPN_IKE_AUTH_MODE_FAILED: Could not set the VPN IKE 
Authentication mode. [chars].Mode:[dec]. WLAN: [chars].

Explanation Could not set the VPN IKE authentication mode.

Error Message    %APF-3-SET_VPN_IKE_PFS_MODE_FAILED: Could not set the VPN IKE PFS 
mode. [chars].

Explanation Could not set the VPN IKE PFS mode.

Recommended Action Please check the reason, and specify the VPN IKE Authentication mode for the AP again.

Error Message    %APF-3-SET_VPN_IKE_PHASE1_MODE_FAILEED: Could not set the VPN IKE 
Phase1 mode. [chars]. Mode:[dec]. WLAN: [chars].

Explanation Could not set the VPN IKE Phase1 mode.

Error Message    %APF-3-SET_VPN_IKE_SHAREDKEY_FAILED: Could not set the VPN IKE 
Pre-shared Key. [chars].Length: [dec]. WLAN: [chars].

Explanation Could not set the VPN IKE Pre-shared Key. Key length can not be more than 128.

Recommended Action Please specify the key again.

Error Message    %APF-3-SET_WPA2_ENC_MODE_FAILED: Could not set the WPA2 encryption 
mode. [chars].Mode:[dec]. WLAN: [chars].

Explanation Could not set the WPA2 encryption mode.

Error Message    %APF-3-SET_WPA_ENC_MODE_FAILED: Could not set the WPA encryption mode. 
[chars]. Mode:[dec]. WLAN: [chars].

Explanation Could not set the WPA encryption mode.

Error Message    %APF-4-SFA_MISMATCH: SFA IE mismatch from 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] - [chars]

Explanation The client does not support the features required for associating to this WLAN.

Recommended Action No action is required.

Error Message    %APF-3-SITE_DELETE_FAILED: Site entry [dec] could not be deleted from 
database.

Explanation A particular site entry could not be deleted from the database.

Error Message    %APF-3-SITE_FAILURE: Cannot find apgroup [chars]

Explanation The system cannot find the database for the AP group.

Recommended Action Delete and re-create the AP group.

Error Message    APF-0-SITE_AP_GROUP_MISCONFIGURED: Cannot find apgroup %s for AP 
%02x:%02x:%02x:%02x:%02x:%02x. Using default-group.

Explanation The apgroup of the access point is not currently configured in this controller.

Recommended Action Assign an access point to the appropriate access point group.

Error Message    %APF-3-SITE_INVALID_VALUE: Invalid value in AP group

Explanation The value in the AP group is invalid.

Recommended Action Delete and re-create the AP group.

Error Message    %APF-3-SITE_NO_AP_GROUP: Cannot find apgroup for AP

Explanation No AP group is set for the AP.

Recommended Action Set the AP group for the AP.

Error Message    %APF-3-SITE_NOT_FOUND: Cannot find AP group

Explanation An internal error has occurred when processing AP group definitions. Groups might not be correctly configured.

Error Message    %APF-3-SITE_NULL_WLAN: Invalid value 0 for WLAN

Explanation WLAN 0 is not valid.

Recommended Action No action is required.

Error Message    %APF-3-SITE_NO_NAME: Site [dec] has no name.

Explanation The site has no name.

Error Message    %APF-0-SITE_OVERRIDE_CONFIG_RESET: Resetting site override config.

Explanation The system is resetting the site override configuration.

Error Message    %APF-3-SOCK_OPER_FAILED: Socket operation [chars] on a socket returned 
failure with error [dec].

Explanation A socket operation on a socket has failed.

Error Message    %APF-1-STA_IPADDR_CONFLICT: Station 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] connected to 
AP[hex]:[hex]:[hex]:[hex]:[hex]:[hex] on port [dec] is attempting to register one 
of our own IP addresses.

Explanation A station connected to AP is attempting to register one of our own IP addresses.

Recommended Action Please reconfigure the IP address of the station.

Error Message    %APF-6-SUP_MOBILE_CLIENTS: Support [dec] mobile clients!

Explanation Support for mobile clients!

Recommended Action No action is required.

Error Message    %APF-6-TKIP_REQ_REJECT: Rejecting RSN request for unicast TKIP from 
mobile [hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Explanation The system is rejecting an RSN request for the unicast TKIP from a mobile.

Recommended Action No action is required.

Error Message    %APF-1-TRUSTED_AP_POL_FAILED: Trusted AP Policy failed for AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] - [chars].

Explanation A trusted AP Policy has failed for the AP.

Error Message    %APF-1-UNABLE_ADD_ROGUE_AP_LRAD_ENTRY: Unable to add Rogue AP Lrad 
entry.

Explanation Unable to add a rogue AP LRAD entry.

Error Message    %APF-1-UNABLE_ADD_ROGUE_CLIENT_ENTRY: Unable to add new rogue Client 
entry [chars]

Explanation Unable to add a new rogue client entry.

Error Message    %APF-1-UNABLE_ADD_ROGUE_CLIENT_LRAD_ENTRY: Unable to add Rogue Client 
Lrad entry.

Explanation Unable to add a rogue client LRAD entry.

Error Message    %APF-3-UNABLE_ALLOC_MEM_OFF_STACK: Unable to allocate memory off the 
stack.

Explanation Unable to allocate memory off the stack.

%APF-3-UNABLE_CREATE_WLAN_FOR_CISCO_AP: Unable to create WLAN [dec] for Cisco AP [chars]

Explanation Unable to create the WLAN for the Cisco AP.

Error Message    %APF-3-UNABLE_TO_ENCAP_DELTS_HDR: Unable to encapsulate DELTS header 
for mobile [hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Explanation Internal system error

Error Message    %APF-3-UNABLE_TO_ENTER_STATE_AP: Unable to properly enter state [dec] 
AP [chars].

Explanation Unable to properly enter the AP state.

Error Message    %APF-3-UNABLE_TO_ENTER_STATE_CLIENT: Unable to properly enter state 
[dec] client [chars].

Explanation Unable to properly enter the client state.

Error Message    %APF-3-UNABLE_TO_EXIT_STATE_AP: Unable to properly exit state [dec] AP 
[chars].

Explanation Unable to properly exit the AP state.

Error Message    %APF-4-UNABLE_TO_FIND_RSCB: Unable to find rscb for station 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Explanation Internal system error

Error Message    %APF-3-UNABLE_TO_INIT_VAP: Unable to initialize VAP [chars].

Explanation Unable to initialize the VAP.

Error Message    %APF-1-UNABLE_TO_KEEP_ROUGE_CONTAIN: Unable to keep rogue 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] in contained state - no available AP to 
contain.

Explanation Unable to keep rogue in a contained state; the system has no available AP to contain the rogue.

Error Message    %APF-1-UNABLE_TO_PERFORM_MAC_AUTH: Unable to perform MAC authorization 
on [chars]

Explanation Unable to perform MAC authorization.

Error Message    %APF-4-UNABLE_TO_SAVE_SUPP_RATES: Unable to save supported rates for 
station [hex]:[hex]:[hex]:[hex]:[hex]:[hex] ([int],[int])

Explanation Unable to save supported rates for a station.

Error Message    %APF-3-UNABLE_TO_UPDATE_ROGUE_CLIENT: Unable to update state [dec] 
Rogue client [chars].

Explanation Unable to update the rogue client state.

Recommended Action No action is required.

Error Message    %APF-3-UNABLE_TO_UPDATE_STATE_ROGUE_AP: Unable to update state [dec] 
Rogue AP [chars].

Explanation Unable to update the rogue AP state.

Error Message    %APF-1-UNABLE_TO_VALIDATE_ROGUE_AP_POL: Unable to validate rogue AP 
policy for [chars].

Explanation Unable to validate the rogue AP policy. The system cannot auto contain the AP.

Error Message    %APF-3-UNKNOWN_RADIO_TYPE: Unknown Radio Type.

Explanation Radio types can only be 802.11a and 802.11bg.

Error Message    %APF-1-UNSUPP_AUTH_ALGO_NUM: Unsupported authentication algorithm 
number ([dec]) from [hex]:[hex]:[hex]:[hex]:[hex]:[hex].

Explanation The system supports only Open Authentication, Cisco-LEAP, and Shared key authentication algorithms.

Recommended Action No action is required.

Error Message    %APF-4-UNSUPPORTED_COUNTRY: Country '[chars]' is set to be 
unsupported.

Explanation A particular country has been set to be unsupported.

Recommended Action No action is required.

Error Message    %APF-3-UNSUPP_RADIO_TYPE: Unsupported Radio Type.

Explanation Radio types can only be 802.11a and 802.11bg.

Error Message    %APF-3-UPDATE_FOREIGN_AP_FAILED: Could not update foreign AP [chars]. 
[chars].

Explanation Could not update the foreign AP.

Error Message    %APF-3-UPDATE_FOREIGN_AP_INTF_FAILED: Could not update foreign AP 
interface [chars]. [chars].

Explanation Could not update the foreign AP interface.

Error Message    %APF-4-UPDATE_MOBILE_LOCATION_FAILED: Could not update the mobile 
station location. [chars].AP:[chars]. Port:[dec]. Config:[dec].

Explanation Could not update the mobile station location.

Error Message    %APF-6-USE_DEFAULT_CIPHER_SUITE: Using default settings for [chars] 
Cipher Suite for mobile [hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Explanation Since either group or pairwise or akm cipher suite was not included in the association request from mobile. Therefore depending on configuration using the WPA1/WPA2 default settings for the mobile.

Recommended Action No action is required.

Error Message    %APF-1-USER_ADD_FAILED: Unable to create username [chars] for 
mobile[hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Explanation Could not create the associated username entry for a mobile due to internal error.

Error Message    %APF-1-USER_DEL_FAILED: Unable to delete username [chars] for mobile 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Explanation Unable to delete username entry for a mobile. Entry not found.

Error Message    %APF-3-VALIDATE_CCKM_REASS_REQ_ELEMENT_FAILED: Could not validate the 
CCKM Reassociation request element.[chars]. 
Mobile:[hex]:[hex]:[hex]:[hex]:[hex]:[hex].

Explanation Validation for CCKM Reassociation request element failed. Check the reason for failure in error message.

Error Message    %APF-3-VALIDATE_DOT11i_AUTH_FAILED: Could not validate the WPA 
security IE.[chars]. Mobile:[hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Explanation Validation for WPA security information element failed. The supported AKM types are CCKM, DOT1X and PSK

Error Message    %APF-3-VALIDATE_DOT11i_CIPHERS_FAILED: Could not validate Dot11i 
security IE. [chars].Mobile:[hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Explanation Validation for Dot11i security IE failed. Received invalid RSN cipher suite or an invalid Unicast/Multicast WPA OUI code.

Recommended Action This is a debug message only. No action is required.

Error Message    %APF-6-VALIDATE_RSN_IE_FAILED: Could not validate RSN information 
element. [chars].Mobile:[hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Explanation Invalid length for RSN information element.

Recommended Action This is a debug message only. No action is required.

Error Message    %APF-1-VALIDATE_TRUSTED_AP_POL_FAILED: Could not validate trusted AP 
Policy. [chars]. Rogue Addr: [hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Explanation Could not validate the configuration of AP against the third party Trusted AP Policy.

Error Message    %APF-4-VAPENTRY_ADD_FAILED: Unable to create VAP profile '[chars]'. 
Could not insert entry into VAP Tree

Explanation Unable to create VAP profile due to internal system error.

Error Message    %APF-3-VAP_STATUS_SET_FAILED: Could not set VAP status. [chars]. WLAN: 
[chars]

Explanation Could not enable wlan. Either pre shared key is missing or WEP key index is invalid or static WEP key index is same as dynamic WEP key index .

Error Message    %APF-6-WARPASSOC_SWITCH_EVENT: WARP switched [chars] for mobile 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex]. 1xInitiateCount: [dec]...

Explanation Wireless ARP has been switched on/off for the client.

Recommended Action This is a debug message only. No action is required.

Error Message    %APF-6-WARP_ENABLE: Enabling WARP...

Explanation Activating WARP.

Recommended Action This is a debug message only. No action is required.

Error Message    %APF-3-WARP_INIT_FAILED: Could not initialize WARP. [chars].

Explanation Failed to initialize WARP.

Recommended Action This is a debug message only. No action is required.

Error Message    %APF-6-WARP_KCID: WARP KCID: [hex]:[hex]:[hex] 
-[hex]:[hex]:[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 
--[hex]:[hex]:[hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Explanation WARP KCID information.

Recommended Action No action is required.

Error Message    %APF-3-WATCHENTRY_CREATE_FAILED: Unable to create watchlist entry for 
key[hex]:[hex]:[hex]:[hex]:[hex]:[hex]. Key type: [chars].

Explanation Internal system error

Error Message    %APF-3-WATCHENTRY_DEL_FAILED: Unable to delete watchlist entry for key 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex]. [chars]

Explanation Internal system error

Error Message    %APF-3-WEP_KEY_SET_FAILED: Could not set the 802.11 WEP key. [chars]. 
WLAN [chars]

Explanation Could not set the WEP key for the WLAN because it is an Invalid 802.11 WEP key.

Recommended Action This is a debug message only. No action is required.

Error Message    APF-0-WGB_ADD_VLAN_CLIENT_FAILURE: %s: Unable to add wired vlan client 
%02x:%02x:%02x:%02x:%02x:%02x Vlan %d WGB %02x:%02x:%02x:%02x:%02x:%02x

Explanation The system has failed to add a wired VLAN client. The interface for the specified VLAN does not exist.

Recommended Action Configure the interface on the controller for the specified VLAN.

Error Message    %APF-3-WGB_ADD_WIRED_CLIENT_FAILURE: Unable to add wired client 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex].WGB [hex]:[hex]:[hex]:[hex]:[hex]:[hex]. 
[chars].

Explanation Failed to add a wired client. WGB data is missing.

Error Message    %APF-3-WGB_DATA_MEM_ALLOC_FAILED: [chars]: Unable to allocate [dec] 
bytes for WGB state.

Explanation Internal system error

Recommended Action Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message    %APF-4-WGB_DELETE_WIRED_CLIENT_FAILURE: [chars]: Unable to delete 
wired client[hex]:[hex]:[hex]:[hex]:[hex]:[hex] from 
WGB[hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Explanation Failed to delete a wired client. The system could not find the wired client entry.

Error Message    %APF-3-WGB_INVALID_CLIENT_DELETE_ATTEMPT: [chars]: Attempted to 
delete a non wgb client as wgb client.

Explanation Internal system error

Error Message    %APF-6-WGB_INVALID_PARAM: [chars]: Internal error, no WGB data.

Explanation Internal system error

Error Message    %APF-3-WGB_INVWLAN: [chars]

Explanation Received an IAPP or mobility message where the WGB MAC and wired client MAC are erroneously the same.

Error Message    %APF-6-WGB_NOT_FOUND: WGB [hex]:[hex]:[hex]:[hex]:[hex]:[hex] not 
found, no update of wired client info 
([hex]:[hex]:[hex]:[hex]:[hex]:[hex][dec].[dec].[dec].[dec]) in WGB table.

Explanation WGB is not found or no entry of a wired client is found in the WGB table.

Recommended Action This is a debug message only. No action is required.

Error Message    %APF-3-WGB_PLUMB: [chars]

Explanation The system has failed to plumb in the driver the WGB wired client's AAA attributes. This is an internal system error.

Error Message    %APF-3-WGB_POLICY: [chars]

Explanation A WGB wired client normally inherits its associated WGB AAA attributes. This operation failed, this is an internal system error.

Error Message    %APF-3-WGB_UNABLE_TO_ADD_WIRED_CLIENT: [chars]: Unable to add wired 
client [hex]:[hex]:[hex]:[hex]:[hex]:[hex]. WGB 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] is either not found, or blacklisted,or is 
being deleted.

Explanation Failed to add wired a client. Either WGB is not found or is already excluded or is being deleted.

Error Message    %APF-3-WGB_UNSUPPORTED_IAPP_PKT: [chars]: IAPP Error! Unsupported 
Pkt/Subtype ([address]:[dec]:[dec])

Explanation Received unsupported IAPP packet type or subtype.

Error Message    %APF-3-WGB_WIRED_CLIENT_CREATE_FAILURE: [chars]: Unable to create WGB 
wired client entry[hex]:[hex]:[hex]:[hex]:[hex]:[hex]!.

Explanation Internal system error

Error Message    %APF-6-WGB_WIRED_CLIENT_ENTRY_NOT_FOUND: WGB 
([hex]:[hex]:[hex]:[hex]:[hex]:[hex]) table,wired client 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] [dec].[dec].[dec].[dec] not found in WGB 
table.

Explanation Wired client not found in WGB table.

Recommended Action This is a debug message only. No action is required.

Error Message    %APF-3-WGB_WIRED_CLIENT_MAC_CONFLICT: [chars]

Explanation Received an IAPP or Mobility message where the WGB MAC and wired client MAC are erroneously the same.

Error Message    %APF-3-WGB_WIRED_CLIENT_MAXED_OUT: Unable to add wired client 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex].WGB [hex]:[hex]:[hex]:[hex]:[hex]:[hex]. 
[chars].

Explanation Failed to add wired client. Either reached maximum limit of wired client or due to internal system error.

Error Message    APF-0-WGB_WIRED_CLIENT_VLAN_OVERRIDE_FAILURE: %s: Unable to Apply VLAN 
Override to WGB wired client %02x:%02x:%02x:%02x:%02x:%02x!. VLAN %d

Explanation The system has failed to apply a VLAN override for the WGB wired client. The interface is not configured.

Error Message    %APF-3-WIRED_CLIENT_MEM_ALLOC_FAILURE: [chars]: Unable to allocate WGB 
wired client structure!

Explanation Internal system error

Recommended Action Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message    %APF-3-WIRED_CLIENT_NAC_FAILURE: [chars]: Unable to NAC OOB for  WGB 
wired client entry[hex]:[hex]:[hex]:[hex]:[hex]:[hex]!.

Explanation Internal system error

Error Message    APF-0-WIRED_GUEST_CREATE_FAILED_ERR: Could not create Mobile Station 
Entry. %s. Mobile:%02x:%02x:%02x:%02x:%02x:%02x, Type: Wired Guest. Mobile 
rejected.

Explanation The system could not create a mobile station entry.

Error Message    APF-0-WIRED_GUEST_CREATE_FAILED_WRN: Could not create Mobile Station 
Entry. %s. Mobile:%02x:%02x:%02x:%02x:%02x:%02x, Type: Wired Guest. Mobile 
rejected.

Explanation The system could not create a mobile station entry.

Error Message    %APF-4-WLAN_NOT_ENABLED: WLAN [chars] was NOT enabled.

Explanation Internal system error

Error Message    %APF-4-WLAN_NOT_SUPP: WLAN [dec] is not supported on Cisco AP [chars].

Explanation WLAN id is not in valid range for a Cisco AP.

Recommended Action No action is required.

Error Message    %APF-3-WLAN_OUT_OF_RANGE: WlanId [dec] is out of range.

Explanation Wlan Id is not in valid range.

Recommended Action Configure wlan id within the specified range.

Error Message    %APF-4-WPS_LESS_THAN_MIN: WPS (Rogue AP Timeout=[dec]) is less than 
(MIN value=[dec]).Setting it to [dec]

Explanation After data upgrade rogue clean up timer is less than a minute. Setting it to minimum rogue clean up timer value.

Recommended Action This is a debug message only. No action is required.

Error Message    %APF-2-BAD_PMK_CACHE_ENTRY: Found a bad PMK cache entry for 
Station:[hex]:[hex]:[hex]:[hex]:[hex]:[hex] deleting the entry

Explanation Internal system error

Error Message    %APF-3-INVALID_SEC_COMBINATION: Cannot configure export anchor when 
IPv6 is enabled.

Explanation IPv6 and Export Anchors cannot be enabled on a WLAN simultaneously.

Recommended Action Please disable IPv6 if export anchors need to be added to the WLAN configuration.

Error Message    %APF-0-NOTIFICATION_TIMER_NOT_CREATED: [chars] Could not create 
Apf-Locp Notification timer...

Explanation Could not create APF-LOCP Notification timer.

Error Message    %APF-3-WIRED_CLIENT_NAC_FAILURE: [chars]: Unable to NAC OOB for  WGB 
wired client entry[hex]:[hex]:[hex]:[hex]:[hex]:[hex]!.

Explanation Internal system error

AUTOINST Messages

This section contaion AutoInstall (AUTOINST) messages.

Error Message    %AUTOINST-3-MSGTAG001: Unable to start Auto Install task.

Explanation The AutoInstall task could not be started.

Error Message    %AUTOINST-3-MSGTAG002: User aborted Auto Install process.

Explanation The user aborted the AutoInstall process.

Recommended Action No action is required.

Error Message    %AUTOINST-3-MSGTAG003: No interfaces could obtain an IP address.

Explanation DHCP was not successful on any of the connected interfaces.

Error Message    %AUTOINST-3-MSGTAG004: Could not write resolve.conf.

Explanation DNS lookups will not work during the AutoInstall process if resolv.conf cannot be created.

AVL Messages

This section contains AVL tree (AVL) messages.

Error Message    %AVL-0-TREE_CORRUPT: AVL Tree [address] is corrupt

Explanation The AVL Tree is corrupt. Internal system error

Recommended Action

Bias-Free Language

Book Title

Cisco Wireless LAN Controller System Message Guide 7.0.116.0

Chapter Title

APF AUTONIST and AVI System Messages

Results

Chapter: APF AUTONIST and AVI System Messages

APF AUTOINST and AVL System Messages

APF Messages

AUTOINST Messages

AVL Messages

Was this Document Helpful?

Contact Cisco