Cisco Wireless LAN Controller System Message Guide, Release 7.2

SSHPM Messages
SYSNET Messages
SYSTEM Messages

SSHPM SYSNET and SYSTEM Messages

This chapter contains the following topics:

SSHPM Messages

This section contains Secure Shell Protocol Manager (SSHPM) messages.

Error Message    %SSHPM-6-ADD_CERT_INFO: Adding certificate [chars] added to policy 
manager

Explanation The system is adding a certificate to the policy manager.

Recommended Action No action is required.

Error Message    %SSHPM-3-ADD_VER_CERT_FAILED: Error encountered while adding 
verification certificate [chars]

Explanation An internal error has occurred. An error occurred when adding a verification certificate.

Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %SSHPM-4-AES_AP_ONLY: Cisco APs will not be able to join this 
controller

Explanation This system does not contain Cisco certificates for Cisco APs to join.

Recommended Action No action is required.

Error Message    %SSHPM-4-ALREADY_INIT: [chars] already initialized

Explanation An internal error has occurred A function has been called with invalid parameters.

Error Message    %SSHPM-3-AP_CERT_DECODE_FAILED: Decoded AP certificate has invalid 
names

Explanation An internal error has occurred. The AP certificate has invalid names.

Error Message    %SSHPM-4-AP_CERT_EXPIRED: AP certificate time [chars] - [chars] is not 
valid.

Explanation The AP certificate is not valid because the current time falls outside the certificate's validity interval. The controller time may not be set correctly.

Recommended Action Ensure that the controller time is correct.

Error Message    %SSHPM-3-APPGW_CREATION_FAILED: Unable to create [chars] application 
gateway config

Explanation An internal error has prevented an application gateway configuration from being created.

Error Message    %SSHPM-3-AUTH_GRP_ADD_FAILED: Error adding constraint to xauth 
authorization group

Explanation An internal error has occurred. The system has failed to add the xauth constraint to the authorization group.

Error Message    %SSHPM-3-AUTH_GRP_CREATION_FAILED: Error creating xauth authorization 
group

Explanation An internal error has occurred. The system has failed to create xauth in the authorization group.

Error Message    %SSHPM-3-BAD_CERTLEN: Error reading system certificates - certificate 
is too large

Explanation An internal error has occurred. Insufficient memory has been allocated to hold the certificate. The certificate may be corrupted.

Error Message    %SSHPM-3-BAD_CERT_MAGIC1: Certificate store Magic1 missing

Explanation An internal error has occurred. The certificate store may be corrupted.

Error Message    %SSHPM-3-BAD_CERT_MAGIC2: Certificate store Magic2 missing

Explanation An internal error has occurred. The certificate store may be corrupted.

Error Message    %SSHPM-3-BAD_CERT_SUBJET: Failed to extract Mac Address from AP 
certificate

Explanation An internal error has occurred. The system cannot extract the MAC address from the AP certificate.

Error Message    %SSHPM-3-BAD_CERT_TYPE: Unrecognized system certificate type [dec]

Explanation The system has failed to add a certificate into the certificate table because the certificate type is unknown.

Error Message    %SSHPM-3-BAD_COMMIT_CB: SSHPM Policy commit callback with NULL context 
pointer

Explanation An invalid parameter was received from the policy manager callback function.

Recommended Action No action is required.

Error Message    %SSHPM-2-BAD_DEVICE_ID_CERT: Failed to retrieve MAC address from 
bsnOldDefaultIdCert certificate

Explanation An internal error has occurred. The verification failed for bsnOldDefaultIdCert.

Error Message    %SSHPM-3-BAD_NUM_CERT: Invalid number of certificates found

Explanation An internal error has occurred. The certificate store may be corrupted.

Error Message    %SSHPM-4-BAD_TFTP_IP: Invalid TFTP IP address [chars]

Explanation The system has detected an invalid TFTP IP address string.

Recommended Action Check your configuration and try again.

Error Message    %SSHPM-6-BLD_CERT_DELETED_INFO: Corrected credential index (build CA 
deleted)

Explanation A build CA certificate has been deleted from the credential index.

Recommended Action No action is required.

Error Message    %SSHPM-3-BAD_CERT_NAME: Failed to extract Cert Name from Subject

Explanation An internal error has occurred. The system cannot extract the certificate name from the subject.

Error Message    %SSHPM-3-CA_SERVER_INFO: CA-Server for [chars] not configured on 
system

Explanation A CA-server for multiple certificate applications has not been configured.

Recommended Action No action is required.

Error Message    %SSHPM-6-LSC_CERT_INFO: LSC certificate [chars] not present in system

Explanation LSC certificates either are not present in the system or have not been loaded.

Recommended Action No action is required.

Error Message    %SSHPM-6-LSC_PROV_FAIL: LSC AP Provisioning failed AP MAC: 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] Reason: [chars].

Explanation The LSC AP provisioning has failed.

Error Message    %SSHPM-6-LSC_PROV_FAIL_NO_CACERT: LSC AP Provisioning failed AP MAC: 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] Reason: No LSC CA CERT.

Explanation The LSC AP provisioning has failed.

Explanation Ensure the LSC CA certificate is present on the controller.

Error Message    %SSHPM-6-LSC_PROV_FAIL_SYS_BUSY: LSC AP Provisioning failed AP MAC: 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] Reason: System Busy.

Explanation The LSC AP provisioning request cannot be handled because the controller does not have the resources.

Recommended Action No action is required.

Error Message    %SSHPM-6-LSC_READ_CERT: SSHPM-LSC: [chars]

Explanation The CA key has been read from the stored file.

Recommended Action No action is required.

Error Message    %SSHPM-6-SERVICE_DELETED: Deleting service [chars] on port [int]

Explanation This is a service deletion information message from the indicated service.

Recommended Action No action is required.

Error Message    %SSHPM-3-CA_CERT_TABLE_FULL: Unable to find empty slot in CA 
certificate table

Explanation An internal error has occurred. The CA certificate table is full and it might be corrupted.

Error Message    %SSHPM-3-CA_CERT_TABLE_INVALID: Accessing CA certificate table before 
initialization

Explanation An internal error has occurred. An error has occurred while accessing the certificate table.

Error Message    %SSHPM-0-CARD_NOT_FOUND: Slot [dec] requested but not present!

Explanation An internal error has occurred. The ESM card has not been found in the slot.

Error Message    %SSHPM-6-CERT_COMP_MODE_INFO: Certificate compatibility mode 
automatically set

Explanation The new certificate has not been installed. The certificate compatibility mode is enabled automatically.

Recommended Action No action is required.

Error Message    %SSHPM-3-CERT_CONFIG_UPDATE_FAILED: Error encountered while saving 
certificate configuration

Explanation An internal error has occurred. Writing into nonvolatile storage has failed. The storage may be corrupted.

Error Message    %SSHPM-3-CERT_DIR_TOO_LONG: Certificate directory name too long; 
External Key providers registration failed

Explanation The external key providers registration has failed because the certificate directory name is too long.

Error Message    %SSHPM-3-CERT_LOAD_FAILED: Failed to load [chars] certificate [chars] 
into certificate table

Explanation An internal error has occurred. The system has failed to load a certificate into the certificate table.

Error Message    %SSHPM-0-CERT_NOT_FOUND: Error encountered while initializing policy 
manager. [chars] certificates not found

Explanation An internal error has occurred. The system is unable to load the indicated system certificate.

Recommended Action Contact your technical support representative

Error Message    %SSHPM-3-CERT_REALLOC_FAILED: Memory re-allocation for certificate 
table failed while adding [chars]

Explanation An internal error has occurred. The system has failed to reallocate memory to the enlarged certificate table.

Error Message    %SSHPM-3-CERT_TABLE_INVALID: Accessing certificate table before 
initialization

Explanation An internal error has occurred. An error has occurred while accessing the certificate table.

Error Message    %SSHPM-3-CFG_LOAD_FAILED: Policy manager failed to load configuration

Explanation The SSHPM failed to start because the configuration file cannot be loaded.

Error Message    %SSHPM-3-CM_ALLOCATE_FAILED: Failed to allocate certificate manager 
cache for [chars] certificate

Explanation An internal error has occurred while adding a certificate.

Error Message    %SSHPM-3-CREDENTIAL_FILE_WRITE_FAILED: Cannot write [chars] to file 
[chars]

Explanation An internal error has occurred while writing to a file.

Error Message    %SSHPM-1-CREDENTIAL_NOT_UNIQUE: Credential name [chars] already exists

Explanation The certificate addition has failed because the certificate already exists.

Error Message    %SSHPM-3-CREDENTIAL_STORE_FULL: Certificate addition failed because 
credential store is full

Explanation An internal error has occurred while adding a certificate.

Error Message    %SSHPM-3-DEALLOC_ENTRY_INVALID: Unable to deallocate an invalid policy 
manager [chars] list entry

Explanation An internal error has occurred while deleting an invalid entry.

Error Message    %SSHPM-3-DEALLOC_UNALLOC_LIST_ENTRY: Attempt to deallocate 
unallocated policy manager [chars] free list element

Explanation An internal error has occurred while deallocating an unallocated message free list element.

Error Message    %SSHPM-3-DELETE_ENTRY_INVALID: Unable to delete an invalid policy 
manager [chars] list entry

Explanation An internal error has occurred while deleting an invalid entry.

Error Message    %SSHPM-6-DELETE_INVALID_RULE: Unable to delete rule that has been 
marked with SSH_IPSEC_INVALID_INDEX

Explanation The system received a request to delete a rule that has already been deleted.

Error Message    %SSHPM-3-DELETE_MANUF_CERT: Cannot delete manufacturer certificate 
[chars]

Explanation An attempt was made to delete the manufacturer certificate.

Recommended Action No action is required.

Error Message    %SSHPM-3-DELETE_UNKNOWN_CERT: Error encountered while deleting 
certificate [chars]. Certificate unknown

Explanation An internal error has occurred while deleting an unknown certificate.

Recommended Action No action is required.

Error Message    %SSHPM-3-DERIVE_PUB_KEY_FAILED: Cannot derive public key for [chars] 
SSL certificate

Explanation An internal error has occurred while deriving a public key for the SSL certificate.

Error Message    %SSHPM-3-ENTRY_HASH_NOT_FOUND: Failed to find hash entry for rule 
[hex], raw index = [hex], index = [hex]

Explanation An internal error has occurred while finding a hash entry.

Error Message    %SSHPM-3-FATAL_CB: Policy manager callback: [chars]

Explanation A policy manager callback message was received.

Error Message    %SSHPM-3-FOPEN_FAILED: Error reading file [chars]

Explanation An internal error has occurred while opening a file.

Error Message    %SSHPM-3-FREAD_FAILED: Error reading file [chars]

Explanation An internal error has occurred while reading a file.

Error Message    %SSHPM-3-FREAD_FAILED2: Error reading [chars] file. ([dec] out of 
[dec] bytes read)

Explanation An internal error has occurred. The nonvolatile storage may be corrupted.

Error Message    %SSHPM-3-FREAD_FAILED3: Error reading file. ([dec] out of [dec] bytes 
read)

Explanation An internal error has occurred. The nonvolatile storage may be corrupted.

Error Message    %SSHPM-3-FREAD_KEY_FAILED: Error reading [chars] Key. File system may 
be corrupted

Explanation The system has failed to read a key from the file system.

Error Message    %SSHPM-1-FREE_LIST_ALLOCATED: Policy manager [chars] free list already 
allocated

Explanation An internal error has occurred while attempting to allocate a free list when it is already allocated.

Error Message    %SSHPM-3-FREE_LIST_DEPLETED: Failed to allocate from policy manager 
[chars] free list. List has been depleted

Explanation An internal error has occurred. The policy manager free list is out of elements.

Error Message    %SSHPM-3-FREE_LIST_INVALID: Policy manager [chars] free list is 
invalid

Explanation An internal error has occurred. The policy manager free list may be corrupted.

Error Message    %SSHPM-1-FREE_LIST_NOT_ALLOCATED: Failed to allocate from policy 
manager [chars] free list. List has not been allocated yet

Explanation An internal error has occurred. The system attempted to access the policy manager list, but it has not been allocated yet.

Error Message    %SSHPM-3-FSEEK_FAILED: Error reading file [chars]

Explanation An internal error has occurred while reading a file.

Error Message    %SSHPM-3-FS_READ_CERT_FAILED: Error reading [chars] certificate 
[chars]. File system may be corrupted

Explanation An internal error has occurred while reading a certificate from the file system.

Error Message    %SSHPM-3-FS_READ_CERT_HEADER_FAILED: Unable to read block [dec] 
certificate header [dec] from flash

Explanation An internal error has occurred while reading from flash. The nonvolatile storage may be corrupted.

Error Message    %SSHPM-3-FS_READ_KEY_FAILED: Error reading key file [chars] - file 
system may be corrupted

Explanation The system has failed to read a key from the file system.

Error Message    %SSHPM-3-FS_WRITE_FAILED: Error encountered while saving [chars]

Explanation An internal error has occurred while writing into the nonvolatile storage. The storage may be corrupted.

Error Message    %SSHPM-3-FTPDATA_CONFIGURED: FTPDATA rule already configured

Explanation An internal error has occurred while attempting to enable FTPDATA when it was already enabled.

Error Message    %SSHPM-4-GET_CERT_IDX_FAILED: Cannot find table index for certificate 
[chars]

Explanation An internal error has occurred while attempting to reference a certificate that does not exist.

Error Message    %SSHPM-3-GET_LOCAL_TIME_FAILED: Cannot get system time for [chars] SSL 
certificate

Explanation An internal error has occurred while retrieving the system time for the SSL certificate.

Error Message    %SSHPM-3-HTTP_ADD_BLOCK_FAILED: Failed to add block to HTTP redirect 
config

Explanation An internal error has occurred while configuring the HTTP redirect application gateway.

Error Message    %SSHPM-3-HTTP_ADD_RULE_FAILED: Failed to add http-redir application 
gateway rule

Explanation An internal error has occurred while configuring the HTTP redirect application gateway.

Error Message    %SSHPM-3-HTTP_CONFIGURED: HTTP rule already configured

Explanation An internal error has occurred while attempting to enable HTTP when it is already enabled.

Error Message    %SSHPM-3-HTTP_MODE_GET_FAILED: Failed to retrieve Web management 
allowability information

Explanation An internal error has occurred while retrieving web management allowability information.

Error Message    %SSHPM-3-HTTP_REDIR_BODY_FAILED: Unable to create HTTP redirection 
page body.

Explanation An internal error has occurred while configuring the HTTP redirect application gateway.

Recommended Action Verify virtual interface configuration.

Error Message    %SSHPM-3-HTTP_REDIR_CLAUSE_ADD_FAILED: Failed to add clause to HTTP 
redirect config

Explanation An internal error has occurred while configuring the HTTP redirect application gateway.

Error Message    %SSHPM-3-HTTPS_CONFIGURED: HTTPS rule already configured

Explanation An internal error has occurred while attempting to enable the HTTPS when it is already enabled.

Error Message    %SSHPM-3-HTTPS_MODE_GET_FAILED: Failed to retrieve Secure web 
management allowability information

Explanation An internal error has occurred. The system is unable to retrieve secure web management allowability information.

Error Message    %SSHPM-3-ID_CERT_TABLE_FULL: Cannot find an empty row in ID 
certificate table - table may be corrupted

Explanation The system cannot find an empty row in the certificate table. The certificate table may be corrupted.

Error Message    %SSHPM-3-ID_CERT_TABLE_INVALID: Accessing identity certificate table 
before initialization

Explanation An internal error has occurred while accessing the certificate table.

Error Message    %SSHPM-3-IDX_FILE_CORRUPTED: Credential index file may be corrupted

Explanation An internal error has occurred while adding a certificate.

Error Message    %SSHPM-3-IDX_LST_CREATION_FAILED: Policy rule table cannot be created

Explanation An internal error has prevented SSHPM from initializing.

Error Message    %SSHPM-3-IKE_SA_EXPORT_FAILED: Cannot export IKE SA for peer [chars] 
(status: [dec])

Explanation An internal error has prevented IKE SA for the indicated peer from exporting.

Error Message    %SSHPM-3-IMPORTED_SESSION_DELETE_FAILED: Failed to delete imported SA 
for mobile [int].[int].[int].[int]

Explanation An internal error has occurred while deleting an imported SA for the mobile.

Error Message    %SSHPM-3-IMPORT_ID_CERT_FAILED: Unable to open certificate file to 
save the generated key

Explanation An internal error has occurred while opening a file to save the key.

Error Message    %SSHPM-3-INVALID_CID: Function was called with an invalid credential 
ID

Explanation An internal error has occurred. A function call has an invalid parameter.

Error Message    %SSHPM-3-INVALID_IP: Function called with invalid IP address range. 
src: [hex]:[hex] dst: [hex]:[hex].

Explanation An internal error has occurred. A function was called with invalid parameters.

Error Message    %SSHPM-3-INVALID_IPSEC_PSK: Invalid PSK - not applying IPSEC rule for 
peer [chars]

Explanation The configuration has been aborted because the PSK is invalid.

Recommended Action Verify that the PSK is entered correctly.

Error Message    %SSHPM-3-INVALID_L2TP_INFO: Invalid L2TP PPP signal received for 
[chars]

Explanation An unexpected L2TP PPP signal was received.

Error Message    %SSHPM-3-INVALID_NUM_ELEM_FOR_LIST: Invalid element count requested 
for [chars] free list

Explanation An internal error has occurred. A function has been called with an invalid parameter.

Error Message    %SSHPM-3-INVALID_PEER_IP: An attempt to register peer failed because 
peer address [chars] is not valid

Explanation An internal error has occurred. A function has been called with an invalid parameter.

Error Message    %SSHPM-3-INVALID_PROTO: Function called with invalid protocol [dec]

Explanation An internal error has occurred. A function has been called with invalid parameters.

Error Message    %SSHPM-3-INVALID_REQ_ID: An attempt to register peer [chars] failed 
because function was called with an invalid requester ID [dec]

Explanation An internal error has occurred. A function has been called with an invalid parameter.

Error Message    %SSHPM-3-INVALID_TFTP_SERVER_IP: Invalid TFTP server address [chars]

Explanation The TFTP configuration was aborted because the TFTP server address is invalid.

Recommended Action Check the configuration to ensure the TFTP server IP address is entered correctly.

Error Message    %SSHPM-3-INVALID_UDP_PORT: Cannot add UDP broadcast rule with both 
source and destination port set to zero

Explanation An error occurred when configuring the UDP broadcast rule. Both the source and destination port cannot be zero.

Error Message    %SSHPM-3-IN_WCP_CONFIGURED: Inbound WCP rule already configured

Explanation An internal error has occurred while attempting to enable the WCP when it is already enabled.

Error Message    %SSHPM-1-IP_PARSE_FAILED: Failed to parse IP address [chars] for http 
redirect

Explanation The system has failed to configure the HTTP redirect application gateway.

Recommended Action Verify the configuration to ensure the IP address is entered correctly.

Error Message    %SSHPM-3-IPV4_PASS_RULE_CREATION_FAILED: Failed to create IPv4-PASS 
rule for IP ranges src:[chars],[chars]  dst:[chars],[chars]

Explanation An internal error has occurred while creating a pass rule.

Error Message    %SSHPM-3-KEY_BUF_TOO_SMALL: Private key buffer too small to hold 
private read file [chars]. ([dec] < [dec])

Explanation An internal error has occurred while reading a private key.

Error Message    %SSHPM-3-KEYED_PEM_DECODE_FAILED: Cannot PEM decode [chars]

Explanation The private key structure has failed to parse correctly.

Recommended Action Check your configuration and reinstall the certificate.

Error Message    %SSHPM-3-KEY_READ_FAILED: Cannot read key file [chars]

Explanation An internal error has occurred while reading a private key file.

Error Message    %SSHPM-3-KEY_TYPE_NOT_SUPPORTED: Unsupported key format. Only RSA keys 
are supported

Explanation An error has occurred while handing an AP certificate because it does not use an RSA key.

Error Message    %SSHPM-3-L2TP_ADD_FAILED: Error adding L2TP tunnel

Explanation An internal error has prevented an L2TP tunnel to be added.

Error Message    %SSHPM-3-L2TP_ADD_SESSION_FAILED: Unable to insert an L2TP session to 
SSHPM LNS table

Explanation The system cannot insert a session to the SSHPM LNS table due to an internal error.

Error Message    %SSHPM-3-L2TP_LINK_UPDATE_FAILED: Cannot update PEM state for L2TP 
session [chars], reason [chars]

Explanation An internal error has occurred while updating the PEM state for an L2TP session.

Error Message    %SSHPM-3-L2TP_OPEN_FAILED: L2TP Error. Session [chars] failed to open

Explanation An internal error has occurred. The L2TP session failed to open.

Error Message    %SSHPM-3-L2TP_PPP_FAILURE: L2TP PPP failure for [chars], reason 
[chars]

Explanation An internal error has occurred to L2TP. The connection may go down.

Error Message    %SSHPM-3-L2TP_SESSION_EXISTS: Session already exists in LNS table

Explanation Another session exists in the SSHPM LNS table.

Error Message    %SSHPM-3-L2TP_SESSION_TERMINATED: L2TP session open terminated for 
[chars]

Explanation The L2TP session was terminated because a terminate signal was received.

Recommended Action No action is required.

Error Message    %SSHPM-3-L2TP_SESSION_UPDATE_FAILED: L2TP Error. Unable to update a 
foreign L2TP session

Explanation An internal error has occurred. The L2TP session table may be corrupted.

Error Message    %SSHPM-3-L2TP_STALE_SESSION: L2TP Error. Stale session information 
found

Explanation An internal error has occurred. The L2TP session table may be corrupted.

Error Message    %SSHPM-1-L2TP_XAUTH_NO_SUPPORTED: L2TP with XAUTH is not allowed

Explanation L2TP cannot be configured because L2TP with XAUTH is not allowed.

Recommended Action Disable XAUTH in the configuration.

Error Message    %SSHPM-3-LOCAL_AUTH_CREATION_FAILED: Error creating local 
authentication structure

Explanation An internal error has prevented the creation of a local authentication data structure.

Error Message    %SSHPM-3-LOCK_CERT_TABLE_FAILED: Unable to lock CA certificate table

Explanation An internal error has occurred while verifying the firmware signature.

Error Message    %SSHPM-3-MAC_LOOKUP_FAILED: Unable to find mac address 
[int].[int].[int].[int]

Explanation An internal error has occurred while looking up the MAC address.

Error Message    %SSHPM-3-MALLOC_FAILED: [chars]: unable to allocate memory

Explanation The system has failed to allocate memory. The system resource is low.

Error Message    %SSHPM-3-MALLOC_FOR_CERT_FAILED: Unable to allocate memory for [chars] 
certificate

Explanation The system has failed to allocate memory for a certificate. The system resource is low.

Error Message    %SSHPM-3-MALLOC_FOR_KEY_FAILED: Unable to allocate memory for [chars] 
key

Explanation The system has failed to allocate memory for a key. The system resource is low.

Error Message    %SSHPM-6-MANUF_CERT_INFO: Found Manufacturing-installed device 
certificates

Explanation The system has found manufacturing-installed device certificates.

Recommended Action No action is required.

Error Message    %SSHPM-3-MARSHAL_CFG_FAILED: Failed to marshal [chars] config

Explanation An internal error has occurred while configuring the application gateway.

Error Message    %SSHPM-3-MD_FAILED: Failed to create certificate directory

Explanation An internal error has occurred while creating a directory on nonvolatile memory.

Error Message    %SSHPM-3-MM_POLICY_ADDITION_FAILED: Error setting up inter-switch 
IPsec policy

Explanation An internal error has occurred while adding to the inter-switch IPsec policy.

Error Message    %SSHPM-2-MNM_ADD_FAILED: Failed to add inter-switch IPSec policy

Explanation An internal error has occurred. The system is unable to add the inter-switch IPsec policy.

Recommended Action No action is required.

Error Message    %SSHPM-3-MSG_LST_CREATION_FAILED: Policy manager message queue create 
failed

Explanation SSHPM initialization failed because the message queue failed to create.

Error Message    %SSHPM-3-MSG_Q_CREATION_FAILED: Policy manager failed to allocate 
message queue

Explanation SSHPM failed to start because the message queue failed to create.

Error Message    %SSHPM-3-MSG_RX_FAILED: Failed to receive message from [chars]

Explanation An internal error has occurred while reading from the message queue.

Error Message    %SSHPM-3-MSG_SEND_FAILED: Unable to Queue Message

Explanation An internal error has occurred while sending a system message.

Error Message    %SSHPM-3-MSGTAG829: ERROR: Could not add inbound TRACE ROUTE rule 
(ssh_pm_rule_add failed).

Explanation The system could not add an inbound trace route rule (ssh_pm_rule_add failed).

Error Message    %SSHPM-3-MSGTAG830: ERROR: Could not create inbound TRACE ROUTE rule 
(ssh_pm_rule_create failed).

Explanation The system could not create an inbound trace route rule (ssh_pm_rule_create failed).

Error Message    %SSHPM-2-NETIF_CFG_FAILED: Unable to create [chars] interface

Explanation An internal error has occurred while configuring the interface.

Error Message    %SSHPM-6-NO_3RD_PARTY_CERT_INFO: No 3rd party certificate 
configuration found

Explanation No third-party certificate configuration has been found.

Recommended Action No action is required.

Error Message    %SSHPM-4-NO_BUILD_CERT_INFO: Unable to locate firmware build 
certificate

Explanation A build certificate has not been found.

Recommended Action No action is required.

Error Message    %SSHPM-3-NO_FREE_RULE_IDX: Failed to set up [chars] service - rule 
table is full

Explanation Rules for the indicated service were not configured because of an internal error.

Recommended Action No action is required.

Error Message    %SSHPM-3-NO_KEY_PASSWD: Cannot decrypt private key because password 
not specified

Explanation The system has failed to decrypt a private key.

Recommended Action Check your configuration and reinstall the certificate.

Error Message    %SSHPM-3-NO_LOCAL_IKE_SERVER: No IKE server found for local IP [chars]

Explanation An error has occurred while importing IKE SA because no IKE server can be found.

Error Message    %SSHPM-3-NO_PEER_SSHPM: No SSHPM server found for peer [chars]

Explanation An error has occurred while importing IKE SA because no SSHPM server can be found for the indicated peer.

Error Message    %SSHPM-3-NO_ROOM_FOR_CERT: Insufficient memory allocated to hold 
[chars] certificate

Explanation An internal error has occurred while accessing a certificate.

Error Message    %SSHPM-3-NO_ROOM_FOR_CERT2: Insufficient memory allocated to hold 
[chars] certificate. ([dec] < [dec])

Explanation An internal error has occurred while accessing a certificate.

Error Message    %SSHPM-4-NO_RULE_IDX: No matching rule index for rule [int]

Explanation An internal error has occurred while deleting a rule with the unknown indicated index.

Recommended Action No action is required.

Error Message    %SSHPM-3-NOT_INIT: [chars] not initialized

Explanation An internal error caused a function to fail.

Error Message    %SSHPM-3-NO_VIRT_IP: Virtual interface address is not configured

Explanation An error has occurred while getting the virtual interface address.

Recommended Action Verify the virtual interface configuration.

Error Message    %SSHPM-3-NPU_NOT_RESPONDING: Error: NPU did not respond within [dec] 
seconds - deleting [int].[int].[int].[int]

Explanation An internal error has occurred. The NPU has failed to respond.

Error Message    %SSHPM-2-NPU_VIRT_IP_SET_FAILED: Failed to set virtual IP addr in NPU

Explanation An internal error has occurred while setting the virtual IP address in the NPU.

Error Message    %SSHPM-3-NV_GET_FAILED: Error getting file [chars] from non-volatile 
storage

Explanation An internal error has prevented the indicated file from being read.

Error Message    %SSHPM-3-OUT_WCP_CONFIGURED: Outbound WCP rule already configured

Explanation An internal error has occurred while attempting to enable WCP when it is already enabled.

Error Message    %SSHPM-3-PEM_DECODE_FAILED: Cannot PEM decode [chars] [chars]

Explanation A certificate addition has failed because it cannot be parsed correctly.

Error Message    %SSHPM-3-PEM_ENCODE_FAILED: Cannot encode certificate [chars] in PEM 
format

Explanation An internal error has occurred while encoding a certificate to PEM format.

Error Message    %SSHPM-3-PIPE_CREATION_FAILED: Policy manager failed to create pipe

Explanation SSHPM failed to start because a pipe failed to create.

Error Message    %SSHPM-3-PKCS1_DECODE_PRIVATE_KEY_FAILED: Error importing private key 
for use by [chars] server - PKCS1 decode error

Explanation An internal error has occurred while reading a key.

Error Message    %SSHPM-3-PKCS1_DEC_PRIV_KEY_FAILED2: Error importing private key. 
PKCS1 decode error

Explanation An internal error has occurred while reading a key.

Error Message    %SSHPM-3-PKCS1_ENCODE_PRIVATE_KEY_FAILED: Error exporting private key 
for use by [chars] server - PKCS1 encode error

Explanation An internal error has occurred while adding a certificate.

Error Message    %SSHPM-3-PKCS1_ENCODE_PRIV_KEY_FAILED2: Error exporting private key 
[chars] - PKCS1 encode error

Explanation An internal error has occurred while encoding a private key.

Error Message    %SSHPM-3-PKEY_DECODE_FAILED: Cannot decrypt private key

Explanation The system has failed to decode a private key.

Recommended Action Check the configuration and reinstall the certificate.

Error Message    %SSHPM-3-POLICY_ALLOCATE_FAILED: Failed to allocate policy rule

Explanation An internal error has occurred while allocating a policy entry.

Error Message    %SSHPM-3-POLICY_HASH_ADD_FAILED: Failed to add policy rule to hash 
table

Explanation An internal error has occurred while adding a policy rule to the hash table.

Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %SSHPM-2-POLICY_INIT_FAILED: Unable to complete policy initialization

Explanation An internal error has prevented the main policy manager from initializing the child manager.

Error Message    %SSHPM-3-PRIVATE_KEY_GEN_FAILED: Cannot generate private key for 
[chars] SSL certificate

Explanation An internal error has occurred while generating a private key for an SSL certificate.

Error Message    %SSHPM-3-PUB_KEY_EXTRACT_FAILED: Failed to extract public key from AP 
certificate

Explanation An internal error has occurred. The system cannot extract a public key from the certificate.

Error Message    %SSHPM-3-PUB_KEY_MALLOC_FAILED: Failed to allocate memory for public 
key hash

Explanation An internal error has occurred while allocating memory.

Error Message    %SSHPM-3-RADIUS_CLT_CREATION_FAILED: Failed to create RADIUS client

Explanation An internal error has occurred while creating a RADIUS client.

Error Message    %SSHPM-3-RADIUS_SRV_ADD_FAILED: Error adding RADIUS server to policy 
manager

Explanation An internal error has occurred while adding the RADIUS server to a policy manager.

Error Message    %SSHPM-3-RADIUS_SRV_CREATION_FAILED: Error creating RADIUS server info

Explanation An internal error has occurred while creating RADIUS server information.

Error Message    %SSHPM-3-RADIUS_SRV_INFO_ADD_FAILED: Error adding RADIUS server info

Explanation An internal error has occurred while adding RADIUS server information.

Error Message    %SSHPM-2-RAND_INIT_FAILED: Error encountered while initializing random 
number generator

Explanation An internal error has prevented SSHPM from initializing. Some operation may be affected.

Error Message    %SSHPM-3-RANDOM_CID_FAILED: Failed to construct CID for [chars]. 
Unable to get a random number

Explanation An internal error has occurred while adding a certificate.

Error Message    %SSHPM-3-RAND_STIR_ERR: An internal error has occurred in random stir 
routine

Explanation An internal error caused a cryptographic function to fail.

Error Message    %SSHPM-3-RAND_XOR_ERR: An internal error has occurred in xor-noise 
routine

Explanation An internal error caused a cryptographic function to fail.

Error Message    %SSHPM-3-REGISTRY_ADD_FAILED: Cannot add registry entry for peer 
[chars]

Explanation An internal error has occurred while adding an entry for a peer.

Error Message    %SSHPM-3-REGISTRY_DELETE_FAILED: Failed to delete registry entry for 
[chars] (status: [dec])

Explanation An internal error has occurred while deleting a registry entry.

Error Message    %SSHPM-3-REGISTRY_GET_FAILED: Cannot get registry entry for peer 
[chars]

Explanation An internal error has occurred while retrieving a registry entry for a peer.

Error Message    %SSHPM-3-REGISTRY_MEM_ALLOC_FAILED: Unable to allocate memory for 
policy manager registry

Explanation The system has failed to allocate memory. The system resource is low.

Error Message    %SSHPM-3-REQ_SAVE_FAILED: Unable to open certificate request file to 
save certificate request

Explanation An internal error has occurred while opening a file to save a certificate request.

Error Message    %SSHPM-3-RM_AGGR_GRP_FAILED: Failed to remove aggr-mode group

Explanation An internal error has occurred while removing the aggr-mode group.

Error Message    %SSHPM-3-RM_AGGRPSK_FAILED: Failed to remove aggressive mode PSK

Explanation An internal error has occurred while removing an aggressive mode PSK.

Error Message    %SSHPM-3-RM_GRP_FAILED: Failed to remove group. Handle is NULL

Explanation An internal error has occurred while removing an aggressive mode PSK group.

Error Message    %SSHPM-3-RULE_ADDITION_FAILED: Error adding [chars] rule to policy 
manager

Explanation An internal error has prevented the indicated policy rules from being added to the policy manager.

Error Message    %SSHPM-3-RULE_ADDITION_FAILED2: Error adding [chars] rule to policy 
manager for peer [int].[int].[int].[int]

Explanation An internal error has prevented the indicated policy rules from being added to the policy manager.

Error Message    %SSHPM-3-RULE_CREATION_FAILED: [chars] rule creation failed for peer 
[int].[int].[int].[int]

Explanation An internal error has prevented the indicated policy rules from being created.

Error Message    %SSHPM-3-RULE_CREATION_FAILED2: [chars] rule creation failed for peer 
[chars]

Explanation An internal error has prevented the indicated policy rules from being created.

Error Message    %SSHPM-4-RULELIST_EXISTS: [chars] rule already exists

Explanation An internal error has occurred. The policy manager rule already exists.

Error Message    %SSHPM-3-RULE_MEM_ALLOC_FAILED: Unable to allocate memory for policy 
manager rule

Explanation The system has failed to allocate memory. The system resource is low.

Error Message    %SSHPM-3-RULE_REG_INIT_FAILED: Error encountered while initializing 
policy manager registry

Explanation An internal error has prevented SSHPM from initializing.

Error Message    %SSHPM-3-RULE_SET_IP_FAILED: Error setting IP address 
[int].[int].[int].[int] for [chars] rule

Explanation An internal error has occurred. The system has failed to set the IP address for the policy manager rule.

Error Message    %SSHPM-3-SA_CTX_LST_CREATION_FAILED: Policy manager security 
association context table cannot be created

Explanation An internal error has prevented SSHPM from initializing.

Error Message    %SSHPM-2-SEMA_CREATION_FAILED: Cannot create semaphore [chars]

Explanation An internal error has occurred while creating a semaphore. The controller may have a stability problem.

Error Message    %SSHPM-2-SEMA_GIVE_FAILED: Cannot give semaphore [chars]

Explanation A function failed to give a semaphore. The controller may have a stability problem.

Error Message    %SSHPM-2-SEMA_TAKE_FAILED: Cannot take semaphore [chars]

Explanation A function failed to take a semaphore. The controller may have a stability problem.

Error Message    %SSHPM-6-SERVICE_CREATED: Creating service [chars] on port [int]

Explanation This is a service creation information message from the indicated service.

Recommended Action No action is required.

Error Message    %SSHPM-2-SERVICE_CREATION_FAILED: Unable to create [chars] service

Explanation An internal error has prevented the indicated service from being created.

Error Message    %SSHPM-4-SERVICE_EXISTS: [chars] service already exists

Explanation A function is trying to create a service that already exists.

Error Message    %SSHPM-4-SERVICE_NOT_CREATED: Error initializing [chars] service 
because service not created yet

Explanation An internal error has occurred because the indicated service was not created.

Error Message    %SSHPM-6-SET_APPGW: Setting up application gateway [chars] on port 
[int]

Explanation This is an application gateway setup informational message.

Recommended Action No action is required.

Error Message    %SSHPM-3-SET_APPGW_CFG_FAILED: Failed to add [chars] application 
gateway redirect config

Explanation An internal error has occurred while configuring an application gateway.

Error Message    %SSHPM-3-SET_APPGW_FAILED: Error encountered while setting up 
application gateway [chars]

Explanation An internal error has prevented an application gateway service from being set up.

Error Message    %SSHPM-3-SET_CERT_FROM_TIME_FAILED: Failed to set certificate 
'validity not before' string to '[chars]'

Explanation An internal error has occurred. The system has failed to set the certificate validity string.

Error Message    %SSHPM-3-SET_CERT_UNTIL_TIME_FAILED: Failed to set certificate 
'validity not after' string to '[chars]'

Explanation An internal error has occurred. The system has failed to set the certificate validity string.

Error Message    %SSHPM-3-SKB_GET_INFO_FAILED: Failed to extract information from key

Explanation An error has occurred while decoding a private key.

Error Message    %SSHPM-3-SSC_INVALID: Invalid self-signed Cisco AP certificate

Explanation An AP has presented an invalid self-signed Cisco AP certificate.

Error Message    %SSHPM-6-SSC_NOT_SUPPORTED_INFO: Controller not configured to accept 
self-signed AP certificate

Explanation The controller is not configured to accept a self-signed AP certificate.

Recommended Action No action is required.

Error Message    %SSHPM-4-SSH_ALERT:  [chars] [chars]

Explanation The indicated alert message has been received from the SSH library.

Recommended Action No action is required.

Error Message    %SSHPM-3-SSH_CONFIGURED: SSH rule already configured

Explanation An internal error has occurred while attempting to enable SSH when it is already enabled.

Error Message    %SSHPM-3-SSH_EMERG:  [chars] [chars]

Explanation The indicated emergency message has been received from the SSH library.

Error Message    %SSHPM-3-SSH_ERROR:  [chars] [chars]

Explanation The indicated error message has been received from the SSH library.

Error Message    %SSHPM-6-SSH_LOG_MSG:  [chars] [chars]

Explanation The indicated informational message has been received from the SSH library.

Recommended Action No action is required.

Error Message    %SSHPM-4-SSH_WARNING:  [chars] [chars]

Explanation The indicated warning message has been received from the SSH library.

Recommended Action No action is required.

Error Message    %SSHPM-3-SSL_CERT_MALLOC_FAILED: Cannot allocate memory for [chars] 
SSL certificate

Explanation An internal error has occurred while allocating memory for a certificate.

Error Message    %SSHPM-3-SSL_KEY_MALLOC_FAILED: Cannot allocate memory for [chars] SSL 
key

Explanation An internal error has occurred while allocating memory for a key.

Error Message    %SSHPM-3-STAT_CERT_FAILED: Certificate file [chars] is missing

Explanation An internal error has occurred while reading a certificate file.

Error Message    %SSHPM-3-STAT_KEY_FAILED: Private key file [chars] is missing

Explanation An internal error has occurred while reading a private key file.

Error Message    %SSHPM-3-SYS_TIME_ERROR: Error getting system time for certificate 
validation

Explanation An internal error has occurred. The system cannot get the system time for a certificate validation.

Error Message    %SSHPM-0-TASK_CREATION_FAILED: Failed to create policy manager [chars] 
task

Explanation An internal error has prevented SSHPM from initializing the indicated task.

Error Message    %SSHPM-3-TASK_PRI_SET_FAILED: Error encountered while increasing 
policy manager task priority

Explanation An internal error has prevented a task priority to be adjusted. Some operations may be affected.

Recommended Action No action is required.

Error Message    %SSHPM-3-TELNET_CONFIGURED: Telnet rule already configured

Explanation An internal error has occurred while attempting to enable Telnet access when it is already enabled.

Error Message    %SSHPM-3-TELNET_MODE_GET_FAILED: Failed to retrieve telnet 
allowability information

Explanation An internal error has occurred while retrieving Telnet allowability information.

Error Message    %SSHPM-3-TELNET_OVER_OOB_CONFIGURED: Telnet over OOB rule already 
configured

Explanation An internal error has occurred while attempting to enable Telnet over an OOB port when it is already enabled.

Error Message    %SSHPM-3-TELNET_OVER_SERVICE_PORT_CONFIGURED: Telnet over service 
port rule already configured

Explanation An internal error has occurred while attempting to enable Telnet over a service port when it is already enabled.

Error Message    %SSHPM-3-TIMER_CREATION_FAILED: Failed to create [chars] timer

Explanation An internal error has occurred. A Timer creation has failed. The controller may have a stability problem.

Error Message    %SSHPM-3-TUNNEL_ADD_PEER_FAILED: Cannot add peer [chars] to tunnel

Explanation An internal error has prevented peer information from being added to the tunnel.

Error Message    %SSHPM-3-TUNNEL_CREATION_FAILED: Error creating tunnel for [chars]

Explanation An internal error has occurred. The tunnel creation has failed.

Error Message    %SSHPM-3-TUNNEL_SET_CERT_FAILED: Failed to add CA certificate to 
tunnel for peer [chars]

Explanation An internal error has occurred. The system has failed to add a CA certificate to the tunnel.

Error Message    %SSHPM-3-TUNNEL_SET_LOCAL_IP_FAILED: Error setting tunnel local IP for 
RADIUS server [chars]:[dec]

Explanation An internal error has occurred while setting a tunnel local IP for the RADIUS server.

Error Message    %SSHPM-3-UNAUTHORIZED_CERT_SUBJECT: Unauthorized subject name found in 
AP certificate

Explanation The AP certificate contains an unauthorized subject name. There might be a security breach.

Error Message    %SSHPM-3-UNKNOWN_CA_TYPE: Unrecognized system CA certificate type 
[dec]

Explanation The system has failed to add a CA certificate into a certificate table because the certificate type is unknown.

Error Message    %SSHPM-3-UNKNOWN_CERT_ISSUER: Invalid AP certificate. Issuer unknown

Explanation An AP certificate is invalid because the issuer is unknown.

Error Message    %SSHPM-1-UNKNOWN_CREDENTIAL_STATUS: Unrecognized credential status 
([dec])

Explanation An internal error has occurred while attempting to save credential information with an unrecognized status.

Error Message    %SSHPM-3-UNKNOWN_CREDENTIAL_TYPE: Unrecognized credential type 
([dec])

Explanation An internal error has occurred. A function has been called with invalid parameters.

Error Message    %SSHPM-3-UNKNOWN_WLAN_IP: WLAN IP address is not known - deferring WLAN 
policy initialization

Explanation The system is deferring the WLAN setup because the WLAN IP address is not known.

Recommended Action Verify the configuration to ensure that the IP address is entered correctly.

Error Message    %SSHPM-4-UNLINK_FAILED: Cannot delete file [chars]

Explanation An internal error has occurred. A file deletion has failed.

Error Message    %SSHPM-3-UNSUPPORTED_MSG_TYPE: Unsupported policy manager message 
received (msg type = [dec])

Explanation An internal error has occurred. A message has been received with an unsupported type.

Error Message    %SSHPM-2-VIRT_IF_CREATION_FAILED: Unable to create virtual interface

Explanation An internal error has prevented a virtual interface from being created using a saved configuration.

Recommended Action Verify that the configuration is correct.

Error Message    %SSHPM-3-VIRT_IP_SET_FAILED: Unable to set virtual interface address

Explanation An internal error has prevented a virtual interface from being configured using a saved configuration.

Recommended Action Verify that the configuration is correct.

Error Message    %SSHPM-3-VIRT_NAME_SET_FAILED: Unable to set virtual interface name

Explanation An internal error has prevented a virtual interface from being configured using a saved configuration.

Recommended Action Verify that the configuration is correct.

Error Message    %SSHPM-4-WARNING_CB: Policy manager warning callback: [chars]

Explanation A policy manager warning callback message has been received.

Recommended Action No action is required.

Error Message    %SSHPM-3-X509_CERT_ALLOCATE_FAILED: Error allocating x509 structure 
for [chars]

Explanation An internal error has occurred while adding a certificate.

Error Message    %SSHPM-3-X509_CERT_ALLOCATE_FAILED2: Error allocating x509 structure

Explanation An internal error has occurred while adding a certificate.

Error Message    %SSHPM-3-X509_CERT_DECODE_FAILED: X509 decode failed for [chars]. code 
[dec]

Explanation An internal error has occurred while adding a certificate.

Error Message    %SSHPM-3-X509_CERT_ENCODE_FAILED: X509 encode failed for [chars]

Explanation An internal error has occurred while encoding a certificate to X509.

Error Message    %SSHPM-3-X509_ENCODE_KEY_FAILED: Cannot export private key for file 
[chars]. Status [dec]

Explanation An internal error has occurred while exporting a private key to the correct format.

Error Message    %SSHPM-3-X509_KEY_DECODE_FAILED: X509 private key decode failed for 
certificate [chars]

Explanation An internal error has occurred. A private key import has failed.

SYSNET Messages

This section contains sysnet subsystem (SYSNET) messages.

Error Message    %SYSNET-4-ENCAPTYPE_NOT_PROCESSED: sysnet unable to process packet 
with encap type [int]

Explanation The sysnet protocol demux was not able to handle a packet that it received from the forwarding code.

Error Message    %SYSNET-4-INV_ENCAP_TYPE: Unrecognized Encapsulation type [dec].

Explanation The system has detected an unrecognized encapsulation type. This issue could possibly be due to an incorrect configuration.

Error Message    %SYSNET-4-INV_EXIT_PORT: Invalid exit port - could not resolve exit 
intfNum for vlanId [dec], intfNum [dec] Destination MAC 
[hex].[hex].[hex].[hex].[hex].[hex]

Explanation The system has detected an invalid exit port. The system could not resolve the exit intfNum.

Error Message    %SYSNET-3-INV_IF: Circuit Error - vlan id & intIfNum = 0.

Explanation The system has detected a circuit error. Both the VLAN ID and intIfNum are 0.

Error Message    %SYSNET-3-INV_NOTIFY_TYPE: Unknown Entry Type [dec].

Explanation The system has detected an unknown entry type.

Error Message    %SYSNET-3-INV_REGISTRATION_FN: Invalid Registration Function passed as 
an argument for  PDU notifications.

Explanation An invalid registration function has passed as an argument.

Error Message    %SYSNET-3-MAC_ADDR_NOT_FOUND: MAC address for the interface [dec] not 
found.

Explanation The MAC address for the specified interface on the controller has not been found.

Error Message    %SYSNET-3-MAX_REGISTRATION: Maximum number of notification 
registrations exceeded. Allowed [dec], Current [dec]. Registration Failed for 
[dec].

Explanation Registration has failed because the maximum number of notification registrations has been reached.

Error Message    %SYSNET-3-MBUFF_ALLOC_FAIL: Out of System buffers.

Explanation The system is out of system buffers.

Error Message    %SYSNET-4-NOTIFY_FN_EXISTS: Registration for Type [chars] already 
exists.

Explanation A notification registry for the specified type already exists.

SYSTEM Messages

This section contains system (SYSTEM) messages.

Error Message    %SYSTEM-3-BULK_STORAGE_CONF: Failed to configure a bulk data storage 
media.

Explanation The system has failed to configure bulk data storage media.

Error Message    %SYSTEM-3-CFG_ENC_FAIL: Invalid configuration file encryption key/iv 
len ([int]/[int])

Explanation The system has detected an invalid configuration file encryption key/iv len.

Error Message    %SYSTEM-3-CONFIG_ADD_FAIL: Failed to add all the configuration files 
to a contiguous buffer. Internal system error

Explanation The system has failed to add all the configuration files to a contiguous buffer.

Error Message    %SYSTEM-3-DEC_UPDATE_FAIL: Decrypt Update failed.rc = [dec]

Explanation The decrypt update has failed.

Error Message    %SYSTEM-6-DFLT_CONF_BUILD: Creating default configuration for 
'[chars]'.

Explanation The system is creating a default configuration.

Recommended Action No action is required.

Error Message    %SYSTEM-3-ENC_GET_FAIL: No encryption key configured

Explanation No encryption key has been configured.

Error Message    %SYSTEM-3-ENC_UPDATE_FAIL: Encrypt Update failed. rc =[dec]

Explanation The encrypt update has failed.

Error Message    %SYSTEM-3-FILE_NO_SPACE: Not enough space left for file.Space left 
[int]. File size [int]. File name: [chars]

Explanation Not enough space is left for the file.

Error Message    %SYSTEM-3-FILE_OPEN_FAIL: Failed to open file [chars]..

Explanation The system has failed to open a file.

Error Message    %SYSTEM-3-FILE_READ_FAIL: Failed to read configuration file '[chars]'

Explanation The system has failed to read a configuration file.

Error Message    %SYSTEM-3-FILE_READ_NOCLOSE_FAIL: Failed to read a file. The file may 
not be opened. File name: [chars]. rc = [dec]

Explanation The system has failed to read a file. The file may not be opened.

Error Message    %SYSTEM-3-FILE_WRITE_FAIL: Failed to write to a configuration file. 
File Name: [chars]

Explanation The system has failed to write to a configuration file.

Error Message    %SYSTEM-3-FLASH_CHK_FAIL: File '[chars]' read with invalid checksum 
([hex]), should be ([hex]).Flash file system may be corrupt.

Explanation The flash file system may be corrupt.

Error Message    %SYSTEM-3-FLASH_CRC_FAIL: File read with invalid CRC ([hex]), should 
be ([hex])Flash file system may be corrupt

Explanation The file has been read with an invalid CRC. The flash file system may be corrupt.

Error Message    %SYSTEM-3-INVALID_BUF_LEN: Invalid buffer length [int]. Internal 
system error.

Explanation The system has detected an invalid buffer length.

Error Message    %SYSTEM-6-INVALID_CONF_RMV: Removing invalid configuration file 
'[chars]'.

Explanation The system is removing an invalid configuration file.

Recommended Action No action is required.

Error Message    %SYSTEM-3-INVALID_CONF_VER: Invalid configuration file version [int]

Explanation The system has detected an invalid configuration file version.

Error Message    %SYSTEM-3-INVALID_FILE_COUNT: Invalid file count [dec] or count 
exceeded maximum file entries allowed.

Explanation An invalid file count or a count that exceeded the maximum file entries has been allowed.

Error Message    %SYSTEM-3-INVALID_HMAC: Failed to verify HMAC. Internal system error.

Explanation The system has failed to verify HMAC.

Error Message    %SYSTEM-3-INVALID_MBUFF: Mbuf Index contains NULL tail = [address], 
head = [address],free = [dec]. Shared memory allocation error.

Explanation The system has detected a shared memory allocation error.

Error Message    %SYSTEM-3-INV_BYT_CNT: Size check failed for a system buffer. Internal 
system error

Explanation A size check has failed for a system buffer.

Error Message    %SYSTEM-3-INV_CIPHER_LEN: Invalid cipher text length [int] (should be 
[int]). Internal system error.

Explanation The system has detected an invalid cipher text length.

Error Message    %SYSTEM-3-INV_SW_VER_FORMAT: Invalid software version format.

Explanation The system has detected an invalid software version format. The format must be ver.release.maint.build.

Error Message    %SYSTEM-3-MBUF_ALLOC_FAIL: Cannot allocate new Mbuf.Internal system 
error.

Explanation The system cannot allocate a new Mbuf.

Error Message    %SYSTEM-6-MBUF_ALREADY_FREE: Mbuf already free. mbuf = [address], tail 
= [address], head =[address], i = [dec], free = [dec]

Explanation Mbuf is already free.

Recommended Action No action is required.

Error Message    %SYSTEM-3-MBUFF_ALL_USED: No free Mbufs available. Shared memory 
allocation failed. Internal system error.

Explanation No free Mbufs are available. Shared memory allocation has failed.

Error Message    %SYSTEM-3-MBUFF_BUSY: Mbuf index contains Busy tail = [address], head 
= [address],mbuf = [address], free = [dec]. Shared memory resource busy. Internal 
system error.

Explanation The system is trying to allocate a Mbuf that is already in use. The system is not allocating a buffer.

Error Message    %SYSTEM-3-MBUFF_FATAL_ERR: Shared memory resource corrupted. Internal 
system error.Mbuff free: [dec]. Max Mbuff: [dec].

Explanation The shared memory resource is corrupted.

Error Message    %SYSTEM-3-MBUFF_LOCK_FAIL: Failed to lock on shared memory resource. 
Internal system error.

Explanation The system has failed to lock on a shared memory resource.

Error Message    %SYSTEM-3-MBUFF_NULL_CHK_FAIL: Mbuf slot not NULL. Upper Limit = 
[hex], Lower Limit = [hex], mbuf = [address],tail = [address], head = [address], 
free = [dec]. Shared resource failure. Internal system error.

Explanation The system has detected a shared resource allocation failure.

Error Message    %SYSTEM-3-MBUF_FREE_TWICE: Mbuf freed twice, prev Line [dec], curr 
Line [dec]. Internal system error.

Explanation The Mbuf has been freed twice.

Error Message    %SYSTEM-3-MBUF_RANGE_FAIL: Out of range Mbuf. Upper Limit = [hex], 
Lower Limit = [hex], mbuf = [address]. Internal system error

Explanation The shared memory resource is out of range.

Error Message    %SYSTEM-6-MBUFS_FREE: MbufsFree=[int], Active mbuf table, Dumping 
Mbuff Status

Explanation The system is dumping the Mbuf status.

Recommended Action No action is required.

Error Message    %SYSTEM-3-MEM_ALLOC_FAIL: Failed to allocate memory.

Explanation The system has failed to allocate enough memory.

Error Message    %SYSTEM-3-MSG_SND_FAIL: Failed to send a message to the Print task. 
Unable to Print data.

Explanation The system has failed to send a message to the print task. The system is unable to print data.

Error Message    %SYSTEM-3-NO_CIPHER: No cipher text

Explanation The system has detected no cipher text.

Error Message    %SYSTEM-3-NOTIFY_SAVE_FAIL: Failed to save data for a Non-volatile 
component. Registrar ID: [dec].

Explanation The system has failed to save data for a nonvolatile component.

Error Message    %SYSTEM-3-PASSWD_STORE_ALREADY_REG: Registrar ID [dec]. already 
registered.

Explanation The component could not be registered for password store transcoding.

Error Message    %SYSTEM-3-PASSWD_STORE_INTEGRITY_FAILED: Cannot retrieve secret from 
store -- integrity check failed.

Explanation The system has failed an integrity check. The secret might have been compromised.

Recommended Action Reconfigure the secret for security reasons.

Error Message    %SYSTEM-3-PASSWD_STORE_OUT_BUF_TOO_SMALL: Output buffer too small to 
hold retrieved secret [int] bytes are required, but [int] provided.

Explanation There was an error retrieving the secret from the password store.

Error Message    %SYSTEM-3-PASSWD_STORE_REG_FAILED: Invalide registrar ID [dec].

Explanation The component could not be registered for password store transcoding.

Error Message    %SYSTEM-3-PASSWD_STORE_STORAGE_NOT_INITIALIZED: Store failed because 
storage not initialized.

Explanation An error has occurred while performing the password store operation because the storage is not initialized.

Error Message    %SYSTEM-3-PASSWD_STORE_STORAGE_TYPE_UNKNOWN: Unknown storage type 
[hex].

Explanation An error has occurred while performing the password store operation because the specified storage type is unknown.

Error Message    %SYSTEM-3-PASSWD_STORE_TRANSCODE_FAILED: Error encountered while 
transcoding secret(s) in component ID [dec].

Explanation The secret in the specified component could not be transcoded.

Error Message    %SYSTEM-3-PRINT_NOT_READY: Print Task Not Ready. Unable to print data.

Explanation The print task is not ready. The system is unable to print data.

Error Message    %SYSTEM-0-QUEUE_CREATE_FAIL: Failed to create a  queue. Queue Name: 
'[chars]'

Explanation The system has failed to create a queue.

Error Message    %SYSTEM-3-REGID_FAIL: Registrar ID [dec] already in use. Possible 
memory corruption or trying to register the component twice

Explanation The Registrar ID is already in use. There is possible memory corruption or the system is trying to register the component twice.

Error Message    %SYSTEM-3-REG_MAX_FAIL: Maximum number of registrations exceeded. 
Registrar ID:[dec] could not be registered.

Explanation The maximum number of registrations has been exceeded. The component could not be registered for NVRAM storage.

Error Message    %SYSTEM-3-RESTORE_DFL_CONF_FAIL: Unable to restore default 
configuration.Registrar ID [dec].

Explanation The system is unable to restore the default configuration.

Error Message    %SYSTEM-3-SYSAPI_ERR: System Error : [chars]

Explanation A system error occurred with the following string.

Error Message    %SYSTEM-6-SYSAPI_INFO: System Info : [chars]

Explanation This is a system information message with the following string.

Error Message    %SYSTEM-3-VER_LEN_FAIL: Build version length verification failed.

Explanation The build version length verification has failed.

Error Message    %SYSTEM-3-VOL_SIZE_FAIL: Failed to get size of volume. File: [chars]

Explanation The system has failed to get the size of the volume.

Error Message    %SYSTEM-3-VOL_WRITE_FAIL: Failed to write configuration file into 
flash. File Name: [chars].

Explanation The system has failed to write the configuration file into the flash.

Error Message    %SYSTEM-3-SYSAPI_ERR: System Error : [chars]

Explanation A system error has occurred with the specified string.

Bias-Free Language

Book Title

Cisco Wireless LAN Controller System Message Guide, Release 7.2

Chapter Title

SSHPM SYSNET and SYSTEM Messages

Results

Chapter: SSHPM SYSNET and SYSTEM Messages

SSHPM SYSNET and SYSTEM Messages

SSHPM Messages

SYSNET Messages

SYSTEM Messages

Was this Document Helpful?

Contact Cisco