Debug Commands: 802.11

debug 11k

To configure the debugging of 802.11k settings, use the debug 11k command.

debug 11k { all | detail | errors| events | history | optimization | simulation} { enable | disable}

Syntax Description

all

Configures the debugging of all 802.11k messages.

detail

Configures the debugging of 802.11k details.

errors

Configures the debugging of 802.11k errors.

events

Configures the debugging of all 802.11k events.

history

Configures the debugging of all 802.11k history. The Cisco WLC collects roam history of the client.

optimization

Configures the debugging of 802.11k optimizations. You can view optimization steps of neighbor lists.

simulation

Configures the debugging of 802.11k simulation data. You can view details of client roaming parameters and import them for offline simulation.

enable

Enables the 802.1k debugging.

disable

Disables the 802.1k debugging.

Command Default

None.

Command History

Release Modification
8.3 This command was introduced.

Examples

This example shows how to enable the debugging of 802.11k simulation data: 

(Cisco Controller) >debug 11k simulation enable

Related Commands

config assisted-roaming

config wlan assisted-roaming

show assisted-roaming

debug 11w-pmf

To configure the debugging of 802.11w, use the debug 11w-pmf command.

debug 11w-pmf { all | events| keys} { enable | disable}

Syntax Description

all

Configures the debugging of all 802.11w messages.
keys

Configures the debugging of 802.11w keys.
events

Configures the debugging of 802.11w events.
enable

Enables the debugging of 802.1w options.

disable

Disables the debugging of 802.1w options.

Command Default

None

Command History

Release Modification
7.6 This command was introduced in a release earlier than Release 7.6.

Command History

Release Modification
8.3 This command was introduced.

Examples

The following example shows how to enable the debugging of 802.11w keys:

(Cisco Controller) >debug 11w-pmf keys enable

debug 11v all

To configure the 802.11v debug options, use the debug 11v all command.

debug 11v all { enable | disable}

Syntax Description

enable

Enables all the debug.

disable

Disables all the debug.

Command Default

None

Command History

Release Modification
8.1

This command was introduced.

Command History

Release Modification
8.3 This command was introduced.

Examples

The following example shows how to enable all the debug: 

(Cisco Controller) >debug 11v all enable

debug 11v detail

To configure the 802.11v debug details, use the debug 11v detail command.

debug 11v detail { enable | disable}

Syntax Description

enable

Enables debug details.

disable

Disables debug details.

Command Default

None

Command History

Release Modification
8.1

This command was introduced.

Command History

Release Modification
8.3 This command was introduced.

Examples

The following example shows how to enable 802.11v debug details: 

(Cisco Controller) >debug 11v detail enable

debug 11v error

To configure the 802.11v error debug options, use the debug 11v errors command.

debug 11v errors { enable | disable}

Syntax Description

enable

Enables error debug.

disable

Disables error debug.

Command Default

None

Command History

Release Modification
8.1

This command was introduced.

Command History

Release Modification
8.3 This command was introduced.

Examples

The following example shows how to enable 802.11v error debug: 

(Cisco Controller) >debug 11v error enable

debug 11w-pmf

To configure the debugging of 802.11w, use the debug 11w-pmf command.

debug 11w-pmf { all | events| keys} { enable | disable}

Syntax Description

all

Configures the debugging of all 802.11w messages.
keys

Configures the debugging of 802.11w keys.
events

Configures the debugging of 802.11w events.
enable

Enables the debugging of 802.1w options.

disable

Disables the debugging of 802.1w options.

Command Default

None

Command History

Release Modification
7.6 This command was introduced in a release earlier than Release 7.6.

Command History

Release Modification
8.3 This command was introduced.

Examples

The following example shows how to enable the debugging of 802.11w keys:

(Cisco Controller) >debug 11w-pmf keys enable