The output of the show mpls config
command:
Device# show mpls config
5.42.42.43:
path_id : 0
ilm : 136000
nhlfe : 16:
lbr : 5.42.42.42
age : 6.980000028 { 5.42.42.42 5.42.42.43 }
path_id : 1
ilm : 136001
nhlfe : 18:
lbr : 5.42.42.42
age : 6.970000026 { 5.42.42.42 5.42.42.43 }
The output of the show fluidity mpo statistics
command:
Device# show fluidity mpo statistics (on Mesh End)
table-size 2:
MAC address : 40:36:5A:15:C8:50 8C:89:A5:83:EB:71
Tx-1 : 0 208
Tx-2 : 0 208
Rx-Accept-1 : 178 0
Rx-Accept-2 : 30 0
Rx-Drop-1 : 30 0
Rx-Drop-2 : 178 0
Lost-1-only : 0 0
Lost : 0 0
Device# show fluidity mpo statistics (on Mobile Primary unit)
table-size 2:
MAC address : 40:36:5A:15:C8:50 8C:89:A5:83:EB:71
Tx-1 : 208 0
Tx-2 : 208 0
Rx-Accept-1 : 0 182
Rx-Accept-2 : 0 26
Rx-Drop-1 : 0 26
Rx-Drop-2 : 0 182
Lost-1-only : 0 0
Lost : 0 0
MAC address: Source L2 address of the external network device which is sending packets.
Tx-1 and Tx-2: These counters represent, respectively, the number of packets transmitted on the primary path and secondary paths (cumulative
sum for all available secondary paths, that is path IDs 1 to 3).
Rx-Accept-1 and Rx-Accept-2: These counters represent, respectively, the number of packets received and dropped in the de-duplication process either on
the primary path or secondary paths.
Lost-1-only: Number of packets received and accepted in the de- duplication process on the secondary paths but not on the primary path.
Lost: The cumulative number of packets lost on both primary path and secondary paths.
The output of the show fluidity network
command:
Device# show fluidity network (on Mesh End and Mobile Primary)
unit 5.21.201.60 infrastructure meshend primary
vehicles 4 total_mobiles 5
infrastructure 1 backbone 0 meshend 5.21.201.60
Vehicle ID : + 85313616
Path : 0
Infrastr.ID : 5.21.201.60
Via : R1
Mobile ID : 5.21.200.80
Via : R2
H/O seq : 5710
H/O age : 36.597
#M: 2
Primary ID : 5.21.200.80
Secondary IDs : 5.21.201.204
Vehicle ID : + 85313616
Path : 1
Infrastr.ID : 5.21.201.60
Via : R2
Mobile ID : 5.21.201.204
Via : R2
H/O seq : 5711
H/O age : 5.909
#M: 2
Primary ID : 5.21.200.80
Secondary IDs : 5.21.201.204
![](https://www.cisco.com/content/dam/en/us/td/i/templates/note.gif)
Note
|
Intermediate nodes (MP and mobile secondaries) have only a subset of paths.
MPO path ID 0: primary path, others: redundant paths.
|
The output of the show eng-stats
command:
Device# show eng-stats (on mobile primary unit)
....
Fluidity role : primary
vehicle id : 0
static : 3.21.201.60 [FC:58:9A:15:C7:D2]
mobile : 4.21.200.80 [FC:58:9A:15:B9:13]
snr : 42
rssi : -54
dop : 40
chan : 132/40
handoff: 21.518258794
time : 2
Current:
ho_seq: 7 pending: false age: 21.518303221 primary: 5.21.200.80
[0] - <3.21.201.60 - 4.21.200.80> status SUCCESS seq 6 id 0 age 59.469266332 rssi 42
[1] - <4.21.201.60 - 4.21.201.204> status SUCCESS seq 7 id 1 age 21.518317752 rssi 41
last primary: <3.21.201.60 - 4.21.200.80>
free ids: 7 6 5 4 3 2
current missing path mask: 1111110
HO Table
static : 3.21.201.60 [FC:58:9A:15:C7:D2]
mobile : 4.21.200.80 [FC:58:9A:15:B9:13]
rssi : 42
dop : 40
chan : 132/40
updated : 74
skip : 0
static : 4.21.201.60 [FC:58:9A:15:C7:D3]
mobile : 4.21.201.204 [FC:58:9A:15:E4:D3]
rssi : 41
dop : 40
chan : 100/40
updated : 18
skip : 0
rssi_delta : 6 3
threshold : 35