Default Priority
|
Default priority to be assigned to an incoming message if no specific priority is defined in the Message Handling Rules table.
Default value is 0.
|
Message Sla Ms
|
Service Level Agreement (SLA) in milliseconds, defines the number of milliseconds that are associated with an incoming event
or message. In case the configured duration times out, the Default Discard Behavior is applied.
Maximum time (in millisec) that a message has in an inbound message handling queue waiting for a worker thread. Configuring
this value avoids processing a message to time out by a remote peer.
Default value is 1500 ms.
|
Inbound Message Queue Size
|
Allows the maximum number of messages in the Inbound Message Queue. When the number of messages exceeds this value, messages
are discarded as defined in the Message Handling Rules and the Default Discard Behavior.
Default value is 1000.
|
Default Instance Rate Limit
|
This parameter is applied to messages that do not have an applicable overload handling rule configured in the Message Handling
Rules table.
Default value is 0.
|
N7 Emergency Message Priority
|
Default priority assigned to messages related to an emergency session.. Emergency message priority is applied when the DNN
matches an emergency DNN configured under PCF Configuration.
Default value is 1.
|
Default Discard Behaviour
|
Default behavior to be applied to an incoming message if no specific priority is defined in the Message Handling Rules table.
Default value is MESSAGE_DROP.
|
Message Handling Rules
|
Defines specific inbound message overload handling rules based on different criteria. For more information, see Table 3 |