Sample Configuration
The following is only a sample configuration file provided solely for your reference. You must create and modify your own configuration file according to the specific needs of your deployment.
----- snip -----
active-charging service acs
bandwidth-policy BWP
flow limit-for-bandwidth id 1 group-id 2
flow limit-for-bandwidth id 2 group-id 3
flow limit-for-bandwidth id 100 group-id 100
group-id 2 direction uplink peak-data-rate 256000 peak-burst-size 1000 violate-action discard
group-id 2 direction downlink peak-data-rate 200000 peak-burst-size 1000 violate-action discard
group-id 3 direction downlink peak-data-rate 256000 peak-burst-size 1000 violate-action discard
group-id 4 direction uplink peak-data-rate 300000 peak-burst-size 1200 violate-action lower-ip-precedence
group-id 100 direction downlink peak-data-rate-kbps 4294967295 peak-burst-size 4294967295 violate-action discard
ruledef L3_SERVER
ip server-ip-address = 2.2.2.2/32
tcp either-port = 80
#exit
ruledef L4_PORT
tcp either-port = 80
udp either-port = 80
multi-line-or all-lines
#exit
ruledef L7_HTTP
http host contains 2.2.2.2
multi-line-or all-lines
#exit
ruledef http-pkts
http any-match = TRUE
#exit
ruledef http-port
tcp either-port = 80
rule-application routing
#exit
ruledef ip-any-rule
ip any-match = TRUE
#exit
urr-list urrs
rating-group 10 urr-id 5
#exit
charging-action starent
content-id 10
billing-action egcdr
#exit
rulebase default
#exit
credit-control group default
pending-traffic-treatment noquota buffer
pending-traffic-treatment quota-exhausted pass
usage-reporting quotas-to-report based-on-grant
rulebase starent
billing-records egcdr
dynamic-rule order first-if-tied
action priority 5 ruledef http-pkts charging-action standard
action priority 10 ruledef L7_HTTP charging-action starent
action priority 20 ruledef L4_PORT charging-action starent
action priority 100 ruledef L3_SERVER charging-action starent
action priority 10000 ruledef ip-any-rule charging-action starent
route priority 1 ruledef http-port analyzer http
egcdr threshold interval 1000
bandwidth default-policy BWP
#exit
traffic-optimization-policy default
#exit
#exit
context ingress
interface N3_interface
ip address 1.1.2.1 1.1.2.2
ipv6 address abc0:0:0:cb::1/64 secondary
#exit
interface N3_interface_LOGICAL loopback
ip address 1.1.2.1 1.1.2.2
#exit
interface N3_interface_LOGICAL2 loopback
ip address 1.1.2.1 1.1.2.2
#exit
interface N4U_interface
ip address 1.1.2.1 1.1.2.2
ipv6 address abc0:0:0:cd::1/64 secondary
ipv6 address abc0:0:0:ca::1/64 secondary
#exit
interface N4U_interface_LOGICAL loopback
ip address 1.1.2.1 1.1.2.2
#exit
interface N4_interface
ip address 1.1.2.1 1.1.2.2
ipv6 address abc0:0:0:cc::1/64 secondary
#exit
interface N4_interface_LOGICAL loopback
ip address 1.1.2.1 1.1.2.2
#exit
subscriber default
exit
aaa group default
#exit
gtpp group default
#exit
gtpu-service N3-GNB1
bind ipv4-address 1.1.1.1
exit
gtpu-service N3-GNB2
bind ipv4-address 1.1.2.1
exit
gtpu-service control_gtpu
bind ipv4-address 1.1.2.1
exit
sx-service N4
instance-type userplane
bind ipv4-address 1.1.2.1
sx-protocol heartbeat interval 3600
sx-protocol heartbeat max-retransmissions 1
sx-protocol association reattempt-timeout 30
exit
user-plane-service user-plane-service
associate gtpu-service N3-GNB1 upf-ingress
associate gtpu-service control_gtpu cp-tunnel
associate sx-service N4
associate fast-path service
associate control-plane-group default
load-control capacity 900
exit
user-plane-service user-plane-service1
exit
ip route 1.1.2.1 1.1.2.2 1.1.2.3 N4_interface
ip route 1.1.2.1 1.1.2.2 1.1.2.3 N4_interface
ip route 1.1.2.1 1.1.2.2 1.1.2.3 N3_interface
ip route 1.1.2.1 1.1.2.2 1.1.2.3 N3_interface
ip route 1.1.2.1 1.1.2.2 1.1.2.3 N4_interface
ip route 1.1.2.1 1.1.2.2 1.1.2.3 N3_interface
ip route 1.1.2.1 1.1.2.2 1.1.2.3 N4_interface
ip route 1.1.2.1 1.1.2.2 1.1.2.3 N3_interface
#exit
context egress
interface N6_interface
ip address 1.1.2.1 1.1.2.2
ipv6 address abc0:0:0:cf::1/64 secondary
#exit
subscriber default
exit
apn starent.com
pdp-type ipv4 ipv6
selection-mode subscribed sent-by-ms chosen-by-sgsn
gtpp group default accounting-context egress
ip context-name egress
active-charging rulebase starent
exit
aaa group default
#exit
gtpp group default
gtpp attribute local-record-sequence-number
gtpp dictionary custom24
gtpp egcdr service-data-flow threshold interval 60
gtpp egcdr service-data-flow threshold volume downlink 13000
gtpp egcdr service-data-flow threshold volume uplink 17000
gtpp egcdr service-data-flow threshold volume total 22222
#exit
ipv6 route 2:2:2:2::/64 next-hop abc0::ab:1c:2ff:def9:1ad interface N6_interface
ip route 1.1.2.1 1.1.2.2 1.1.2.3 N6_interface
ip route 1.1.2.1 1.1.2.2 1.1.2.3 N6_interface
ipv6 route 2:2:2:2::/64 next-hop abc0::ab:1c:2ff:def9:1ab interface N6_interface
ip route 1.1.2.1 1.1.2.2 1.1.2.3 N6_interface
#exit
control-plane-group default
sx-association initiated-by-cp
peer-node-id ipv4-address 1.1.1.1 interface n4
#exit
user-plane-group default
#exit
port ethernet 1/11
no shutdown
vlan 203
no shutdown
bind interface N4U_interface ingress
#exit
vlan 204
no shutdown
bind interface N4_interface ingress
#exit
vlan 205
no shutdown
bind interface N3_interface ingress
#exit
vlan 206
no shutdown
#exit
vlan 207
no shutdown
bind interface N6_interface egress
#exit
#exit
end
Feedback