ポータルを使用した VNF および VM のリカバリ
ESC ポータルを使用して VNF と VM の手動回復を実行できるようになりました。
手順
ステップ 1 |
[展開(Deployments)] を選択します。 |
ステップ 2 |
エラー状態の展開を選択します。 VM レベルのリカバリでは、[VNFの表示(View VNFs)] ページからエラー状態の VM を選択します。 |
ステップ 3 |
[VNFの回復(Recover VNF)] または [VNFのモニタと回復(Monitor + Recover VNF)] をクリックします。 |
ステップ 4 |
[OK] をクリックして確定します。 |
ステップ 5 |
[リカバリアクション(Recovery Action)]ドロップダウンからリカバリアクションを選択し、[OK] をクリックします。 次のリカバリアクションを使用できます。
リカバリオプションの詳細については、リカバリポリシーを参照してください。 |
重要なポイント
-
設定可能な手動回復は、実行中のトランザクション動作をサポートしていません。したがって、設定可能な手動回復中にフェールオーバーが発生すると、手動回復は事前定義されたリカバリアクションで再開されます。
-
展開の移行では、デフォルトのリカバリポリシーを使用します。LCS ベースのリカバリでは、VM/VNF 手動回復のリカバリアクションは提供されません。