チェックリストのテスト名
|
テストの説明
|
システム - CPU 数の確認(SYSTEM - CHECK CPU COUNT)
|
プライマリ サーバとセカンダリ サーバの両方の CPU 数を確認します。
両方のサーバの CPU 数は要件を満たす必要があります。
|
システム - ディスク IOPS の確認(SYSTEM - CHECK DISK IOPS)
|
プライマリ サーバとセカンダリ サーバの両方のディスク速度を確認します。
必要な最小ディスク速度は 200 Mbps です。
|
システム - RAM サイズの確認(SYSTEM - CHECK RAM SIZE)
|
プライマリ サーバとセカンダリ サーバの両方の RAM サイズを確認します。
両方のサーバの RAM サイズが要件を満たしている必要があります。
|
システム - システム ディスク サイズ(SYSTEM - CHECK DISK SIZE)
|
プライマリ サーバとセカンダリ サーバの両方のディスク サイズを確認します。
両方のサーバのディスク サイズが要件を満たしている必要があります。
|
システム - サーバへの ping 確認(SYSTEM - CHECK SERVER PING REACHABILITY)
|
プライマリ サーバが ping を介してセカンダリ サーバに到達できることを確認します。
|
システム - OS 互換性の確認(SYSTEM - CHECK OS COMPATABILITY)
|
プライマリ サーバとセカンダリ サーバの OS バージョンが同じであることを確認します。
|
システム - ヘルス モニタのステータス(SYSTEM - HEALTH MONITOR STATUS)
|
ヘルス モニタ プロセスがプライマリ サーバとセカンダリ サーバの両方で実行されているかどうかを確認します。
|
ネットワーク - ネットワーク インターフェイスの帯域幅確認(NETWORK - CHECK NETWORK INTERFACE BANDWIDTH)
|
インターフェイス eth0 の速度がプライマリ サーバとセカンダリ サーバの両方で推奨されている 100 Mbps に一致していることを確認します。
このテストでは、プライマリ サーバとセカンダリ サーバ間でのデータ送信によるネットワーク帯域幅の測定は行いません。
|
ネットワーク - データベース ポートの開閉についてファイアウォールの確認(NETWORK - CHECK FIREWALL FOR DATABASE PORT ACCESSIBILITY)
|
データベース ポート 1522 がシステム ファイアウォールで開いていることを確認します。
このポートが無効になっていると、テストは iptables リストで 1522 の権限を付与します。
|
データベース - オンラインステータスの確認(DATABASE - CHECK ONLINE STATUS)
|
データベース ファイルのステータスがオンラインになっており、プライマリ サーバとセカンダリ サーバの両方でアクセス可能であることを確認します。
|
データベース - メモリ ターゲットの確認(DATABASE - CHECK MEMORY TARGET)
|
HA セットアップの 「/dev/shm」データベース メモリ ターゲット サイズを確認します。
|
データベース - リスナーのステータス(DATABASE - LISTENER STATUS)
|
データベースのリスナーがプライマリ サーバとセカンダリ サーバの両方で稼働中であることを確認します。
障害が発生した場合、テストはリスナーを起動し、ステータスを報告しようとします。
|
データベース - リスナー設定ファイルの破損確認(DATABASE - CHECK LISTENER CONFIG CORRUPTION)
|
すべてのデータベース インスタンスがデータベース リスナー設定ファイル「listener.ora」の下にあることを確認します。
|
データベース - TNS 設定ファイルの破損確認(DATABASE - CHECK TNS CONFIG CORRUPTION)
|
データベース TNS リスナーの設定ファイル「tnsnames.ora」の下にすべての「WCS」インスタンスが存在していることを確認します。
|
データベース - TNS 到達可能性のステータス(DATABASE - TNS REACHABILITY STATUS)
|
プライマリ サーバとセカンダリ サーバの両方で TNSPING が成功していることを確認します。
|