Cisco ACI vPod のゲートウェイ IP アドレスの変更
Cisco Application Centric Infrastructure(ACI) Virtual Pod(vPod) のゲートウェイ IP アドレスを変更するには、仮想スパイン(vSpine)および仮想リーフ(vLeaf)ノードのクリーン再起動を実行する必要があります。また、Cisco ACI vPod の Cisco ACI Virtual Edge 仮想マシン(VM)を再起動します。そうしないと、vSpine と vLeaf でゲートウェイ IP アドレスが更新されません。
始める前に
手順
ステップ 1 |
ゲートウェイ デバイスで、新しいゲートウェイ IP アドレスを設定します。 |
ステップ 2 |
Cisco Application Policy Infrastructure Controller(APIC)の設定で、ゲートウェイ IP アドレスを変更します。 |
ステップ 3 |
vSpine および vLeaf ノードのクリーン再起動を実行します。 または、vSpine および vLeaf ノードの使用を停止し、それから使用を再開することもできます。 |
ステップ 4 |
Cisco ACI vPod のすべての Cisco ACI Virtual Edge VM を再起動します。 |
ステップ 5 |
ゲートウェイ デバイスから古いゲートウェイ IP アドレスを削除します。 |