Step 1 |
UCS-A#
scope
org
org-name
|
Enters
organization mode for the specified organization. To enter the root
organization mode, type
/
as the
org-name
.
|
Step 2 |
UCS-A /org #
scope
ep-log-policy sel
|
Enters
organization endpoint log policy mode and scopes the SEL policy.
|
Step 3 |
(Optional) UCS-A
/org/ep-log-policy #
set
description
description
|
(Optional)
Provides a
description for the policy.
Note
|
If your
description includes spaces, special characters, or punctuation, begin and end
your description with quotation marks. The quotation marks will not appear in
the description field of any
show
command output.
|
|
Step 4 |
UCS-A
/org/ep-log-policy #
set backup
action
[log-full] [on-change-of-association] [on-clear] [timer] [none]
|
Specifies an
action or actions that will trigger a backup operation.
|
Step 5 |
UCS-A
/org/ep-log-policy #
set backup
clear-on-backup {no |
yes}
|
Specifies
whether to clear the system event log after a backup operation occurs.
|
Step 6 |
UCS-A
/org/ep-log-policy #
set backup
destination
URL
|
Specifies the
protocol, user, password, remote hostname, and remote path for the backup
operation. Depending on the protocol used, specify the URL using one of the
following syntaxes:
-
ftp://
username@hostname
/
path
-
scp://
username
@
hostname
/
path
-
sftp://
username
@
hostname
/
path
-
tftp://
hostname
:
port-num
/
path
Note
|
You can also
specify the backup destination by using the
set
backup hostname
,
set
backup password
,
set
backup protocol
,
set
backup remote-path
,
set
backup user
commands, or by using the
set
backup destination
command. Use either method to specify the backup
destination.
|
|
Step 7 |
UCS-A
/org/ep-log-policy #
set backup
format {ascii |
binary}
|
Specifies the
format for the backup file.
|
Step 8 |
UCS-A
/org/ep-log-policy #
set backup
hostname {hostname |
ip-addr}
|
Specifies the
hostname or IP address of the remote server.
|
Step 9 |
UCS-A
/org/ep-log-policy #
set backup
interval {1-hour |
2-hours |
4-hours |
8-hours |
24-hours |
never}
|
Specifies the
time interval for the automatic backup operation. Specifying the
never
keyword means that automatic backups will not be made.
|
Step 10 |
UCS-A
/org/ep-log-policy #
set backup
password
password
|
Specifies the
password for the username. This step does not apply if the TFTP protocol is
used.
|
Step 11 |
UCS-A
/org/ep-log-policy #
set backup
protocol {ftp |
scp
|
sftp
|
tftp}
|
Specifies the
protocol to use when communicating with the remote server.
|
Step 12 |
UCS-A
/org/ep-log-policy #
set backup
remote-path
path
|
Specifies the
path on the remote server where the backup file is to be saved.
|
Step 13 |
UCS-A
/org/ep-log-policy #
set backup
user
username
|
Specifies the
username the system should use to log in to the remote server. This step does
not apply if the TFTP protocol is used.
|
Step 14 |
UCS-A
/org/ep-log-policy #
commit-buffer
|
|