エンド ユーザ設定の概要
サービス プロファイルや機能グループテンプレートなどのユーザ設定を使用して、LDAP ディレクトリ同期によってエンドユーザに共通設定を適用することができます。LDAP ディレクトリ同期が行われると、設定された設定がすべての同期されたユーザに適用されます。
(注) |
この章では、IM and Presence Service に適用されるユーザ設定について説明します。ボイスメールや会議などの UC サービスを含む全般的な UC ユーザ設定については、Cisco Unified Communications Manager システム設定ガイドの「エンド ユーザの設定」セクションを参照してください。この設定は、LDAP の同期の一部として適用することができます。 |
サービス プロファイル
サービス プロファイルには、ユニファイド コミュニケーション(UC)サービスの設定が含まれます。異なるユーザ グループ毎に異なるサービスを設定することができるため、各グループのユーザは、業務に合わせて設定された適切なサービスを利用することができます。エンド ユーザが IM and Presence Service を利用することができるには、IM and Presence Service を含めるサービス プロファイルを構成します。
エンド ユーザにサービス プロファイルを適用するには、次の方法を使用します。
-
LDAP 同期されたユーザ向け:LDAP ディレクトリからエンド ユーザをインポートした場合、サービス プロファイルを機能グループ テンプレートに割り当てることができ、その機能グループ テンプレートをエンド ユーザに適用することができます。テンプレートの設定は、すべての同期されるユーザに適用されます。
-
アクティブなローカル ユーザ(非 LDAP ユーザ)の場合:多数のユーザに一度に設定を適用するには、一括管理ツールを使用して、csv ファイルまたはスプレッドシート経由で、サービス プロファイルの設定を適用します。一括管理ツールの使用方法の詳細は、http://www.cisco.com/c/en/us/support/unified-communications/unified-communications-manager-callmanager/products-maintenance-guides-list.htmlを参照してください。
あるいは、ユーザ設定を、各ユーザー毎に手動で設定することもできます。
機能グループ テンプレートの概要
機能グループ テンプレートは、LDAP ディレクトリ同期を介してエンド ユーザのグループに対して、即座に共通設定を適用する際に役立ちます。たとえば、機能グループ テンプレートを使用して、エンド ユーザに対して IM and Presence Serviceを有効にすることができます。これは、IM and Presence Service が有効にされたプロファイルをテンプレートに適用することで実行可能です。LDAP ディレクトリの同期に機能グループ テンプレートを適用すると、同期が実行される際に、テンプレートからの設定(設定されたサービス プロファイルおよびユーザ プロファイル設定を含む) が、すべての同期対象のユーザに適用されます。
機能グループ テンプレート設定には、機能グループ テンプレートに割り当てられる次のプロファイルが含まれます。
-
ユーザプロファイル: 一般的な電話機と電話回線の設定のセットが含まれています。共通の電話回線の設定を割り当てるユニバーサル回線テンプレートと、共通の電話回線の設定を割り当てるユニバーサルデバイステンプレートを使用して、ユーザプロファイルを設定する必要があります。これらのテンプレートは、セルフプロビジョニングを設定しているユーザが自分の電話機を設定するのをサポートします。
-
サービス プロファイル:IM and Presence Service、ディレクトリ、ボイスメールなど、一般的な UC サービスが含まれます。