ハイ アベイラビリティ ログイン プロファイル
ハイ アベイラビリティ ログイン プロファイルに関する重要事項
-
この項のハイ アベイラビリティ ログイン プロファイル テーブルを使用して、プレゼンス冗長グループのクライアント再ログインの上限値と下限値を設定できます。 を選択して、クライアント ログインの上限値と下限値を設定します。
を選択し、[サービス(Service)] メニューから [Cisco Server Recovery Manager] -
ハイ アベイラビリティ クライアント ログイン プロファイルは、単一クラスタの展開でのみ適用されます。複数のクラスタが存在する場合、ハイ アベイラビリティ クライアント ログイン プロファイルには、冗長グループの上位および下位のクライアントの再ログイン値を設定することはできません。複数のクラスタ展開でハイ アベイラビリティ クライアント ログイン プロファイルを検出するには、さらにテストを実行する必要があります。
-
Cisco XCP ルータサービスに対してデバッグロギングが有効になっている場合は、IM and プレゼンスサービスに対して現在サポートされているロギングレベルの CPU 使用率の増加と減少が予想されます。
-
ここに示すテーブルに基づいてプレゼンス冗長グループのクライアント再ログインの上限と下限を設定することで、展開のパフォーマンスの問題および高 CPU スパイクを回避できます。
-
各 IM and Presence Service ノードのメモリ サイズおよび各ハイ アベイラビリティ展開タイプ(アクティブ/アクティブまたはアクティブ/スタンバイ)用にハイ アベイラビリティ ログイン プロファイルを提供します。
-
ハイ アベイラビリティ ログイン プロファイル テーブルは、次の入力に基づいて計算されます。
-
クライアント再ログインの下限は、Server Recovery Manager のサービス パラメータ「重要なサービス停止遅延(Critical Service Down Delay)」に基づいており、デフォルトは 90 秒です。重要なサービス停止遅延(Critical Service Down Delay)が変更されると、下限も必ず変わります。
-
アクティブ/スタンバイ展開のプレゼンス冗長グループ内のユーザ合計数、またはアクティブ/アクティブ展開のユーザが最も多いノード。
-
-
プレゼンス冗長グループ内の両方のノードで、クライアント再ログインの上限値と下限値を設定する必要があります。プレゼンス冗長グループの両方のノードでこれらの値をすべて手動で設定する必要があります。
-
クライアント再ログインの上限値と下限値は、プレゼンス冗長グループの各ノードで同じである必要があります。
-
ユーザを再平衡化する場合は、ハイ アベイラビリティ ログイン プロファイル テーブルに基づくクライアント再ログインの上限値と下限値を再設定する必要があります。
ハイ アベイラビリティ ログイン プロファイル テーブルの使用
ハイ アベイラビリティ ログイン プロファイル テーブルを使用して、次の値を取得します。
- [クライアント再ログインの下限(Client Re-Login Lower Limit)] サービス パラメータ値
- [クライアント再ログインの上限(Client Re-Login Upper Limit)] サービス パラメータ値
手順
ステップ 1 |
仮想ハードウェア設定およびハイ アベイラビリティ展開タイプに基づいてプロファイル テーブルを選択します。 |
ステップ 2 |
プロファイル テーブルで、展開内のユーザ数を選択します(最も近い値に切り上げ)。アクティブ/スタンバイ展開を使用している場合、ユーザが最も多いノードを使用します。 |
ステップ 3 |
プレゼンス冗長グループの [ユーザ数(Number of Users)] の値に基づいて、プロファイル テーブル内の対応する再試行の下限値と上限値を取得します。 |
ステップ 4 |
IM and Presence Service の再試行の下限値と上限値を設定します。 を選択し、[サービス(Service)] メニューから [Cisco Server Recovery Manager] を選択して、 |
ステップ 5 |
メニューから [Cisco Server Recovery Manager] を選択して [重要なサービス停止(Critical Service Down Delay)] の値を確認します。デフォルト値は 90 秒です。再試行下限値はこの値に設定してください。 を選択し、[サービス(Service)] |
高可用性 ログイン設定の例
例 1:ユーザ数 15,000 のフル UC プロファイル - アクティブ/アクティブ展開
プレゼンス冗長グループ内のユーザが 3,000 人で、あるノードに 2,000 人、2 台目のノードに 1,000 人のユーザがいます。非平衡型のアクティブ/アクティブ展開の場合、シスコはユーザが最も多いノード(この場合は、2,000 人のユーザが割り当てられているノード)を使用することを推奨します。ユーザ数 15,000 のフル米国(4 vCPU 8 GB)アクティブ/アクティブ プロファイルを使用して、次の再試行の下限値と上限値を取得します。
アクティブ ユーザの予想数 |
再試行下限値 |
再試行上限値 |
2000 |
120 |
253 |
(注) |
再試行上限値は、フェールオーバー発生後にすべてのクライアントがバックアップ ノードにログインするまでのおおよその時間(秒)です。 |
(注) |
120 の下限値は、[重要なサービス停止遅延(Critical Service Down Delay)] サービス パラメータが 120 に設定されていることを前提としています。 |
例 2:ユーザ数 5000 のフル UC プロファイル - アクティブ/アクティブ展開
プレゼンス冗長グループ内の各ノードに 4,700 人のユーザがいます。シスコは、最も近い値に切り上げ、ユーザ数 5,000 のフル米国(4 vCPU 8 GB)アクティブ/アクティブ プロファイルを使用して、ユーザ数 5,000 に基づいて、再試行の下限値と上限値を取得することを推奨します。
アクティブ ユーザの予想数 |
再試行下限値 |
再試行上限値 |
5,000 |
120 |
953 |