Cisco Unified Communications Manager のインストール後の作業
手順
コマンドまたはアクション | 目的 | |
---|---|---|
ステップ 1 |
リリース ノートおよびリリースに付属している Readme ファイルを読みます。 |
リリース ノートは、次の URL からダウンロードできます。リリースおよび任意の COP ファイルの要件の特徴を理解してください。 |
ステップ 2 |
インストール後には、アプリケーション ユーザーのパスワードをリセットすることを推奨します。 |
|
ステップ 3 |
Cisco Unified Real-Time Monitoring Tool(RTMT)を使用して、Unified Communications Manager と IM and Presence Service をリアルタイムでモニタできます。 |
|
ステップ 4 |
カーネル クラッシュがあれば、kerneldump ユーティリティから、クラッシュの収集およびクラッシュをダンプするメカニズムを利用できます。 |
|
ステップ 5 |
システムおよびデバイスに必要なライセンスがあることを確認します。 |
|
ステップ 6 |
定期的にバックアップを行うことを推奨します。自動バックアップをセットアップすることも、任意の時点でバックアップを起動することもできます。 |
|
ステップ 7 |
オプション。デフォルトのロケールは英語です。別のロケールを使用する場合は、ダウンロードしてインストールします。 |
|
ステップ 8 |
既知の不具合を修正する、または Unified Communications Manager に含まれていない、使用したいカスタム デバイスのタイプに対するサポートを有効にするには、インストール後に COP ファイルをインストールする必要があります。 |
|
ステップ 9 |
ダイヤル プランをインストールするには、次のタスクを完了します。 |
北米番号計画(デフォルト)以外の北米のダイヤル プランを使用する場合は、ダウンロードしてインストールする必要があります。 |
ステップ 10 |
オプション。システムでセキュリティを有効にする場合、Cisco CTL クライアントをインストールし、混合モードを有効にします。 |
|
ステップ 11 |
オプション。Cisco Prime Collaboration 保証などのネットワーク管理システムを使用している場合は、Simple Network Management Protocol を有効にします。 |
|
ステップ 12 |
Cisco Unified Communications Manager 仮想マシン(VM)設定でゲスト OS バージョンに変更するため。 |
|
ステップ 13 |
[HTTP リファラー/ホスト ヘッダーでホストの信頼できるリスト(Trusted List of Hosts in HTTP Referer/Host Header)] を設定し、Cisco Unified CM 管理の [エンタープライズ パラメータ(Enterprise Parameters)] ページでパブリック IP アドレスまたは DNS エイリアスを追加していることを確認してください。 |
この構成は、ネットワーク トポロジに、クラスタ内の個々のノードのプライベート IP アドレスとともに外部インターフェイス用に設定されたパブリック IP アドレスがある場合に必要です。それから Unified CM は、Unified CM へのアクセスを許可する前に、最初に Unified CM クラスタで設定されたサーバーを使用して、ホスト ヘッダーに存在する IP アドレスまたはホスト名を検証します。また、Unified CM へのアクセスに使用される DNS エイリアスを、ホストの信頼済みリスト設定で設定する必要があります。たとえば、サーバーが cm1.example.local であり、phone.example.local を使用してサーバーにアクセスする場合、phone.example.local をホストの信頼済みリスト設定に追加する必要があります。 プライベート IP アドレスを使用するプライベート ネットワークから、Cisco Unified CM の管理ユーザー インターフェイスに移動し、[システム(System)] > [エンタープライズ パラメータ(Enterprise Parameters)] を選択して、使用する外部 IP アドレスまたは DNS エイリアスを設定します。 このアクティティの実行後には、すべての Web ページが正しくロードされるように Cisco Tomcat サービスを再起動する必要があります。 |
アプリケーションユーザパスワードのリセット
インストール時に、すべてのアプリケーションユーザパスワードに、インストール時に入力したデフォルトのアプリケーションユーザパスワードが設定されます。 インストール後にこれらすべてのパスワードをリセットすることをお勧めします。
手順
ステップ 1 |
Cisco Unified CM Administration から、 を選択します。 |
ステップ 2 |
[検索(Find)] をクリックします。 |
ステップ 3 |
アプリケーションユーザをクリックします。 |
ステップ 4 |
新しいパスワードを パスワード と パスワードの確認 フィールドに入力します。 |
ステップ 5 |
[保存(Save)] をクリックします。 |
ステップ 6 |
各アプリケーション ユーザに対してこの手順を繰り返します。 |
リアルタイム監視ツールのインストール
この手順を使用して Cisco Unified Real-Time Monitoring Tool (RTMT) をインストールします。 RTMT を使用して、Unified Communications Manager と IM and Presence Service をリアルタイムで監視できます。
始める前に
-
Unified RTMT を Windows OS プラットフォームで実行するには、少なくとも 128 MB のメモリが必要です。Windows/Linux OS プラットフォームでツールを実行するには、少なくとも 300 MB のディスク領域が必要です。
(注)
Linux Unified RTMT プラグイン CcmServRtmtPlugin.binは、RHEL 5、RHEL 6 以上の Linux マシンにインストールできます。 RHEL 4 マシンにインストールする場合は、glibc(OS ライブラリ)のバージョンが 2.4.x 以上であることを確認してください。 glibc バージョンが 2.3.x 以前の場合、基盤となる JRE のインストールが失敗します。
- 現在の Unified RTMT Download は、Unified Communications Manager または Cisco Unity Connection の以前のリリースをサポートしています。 Unified Communications Manager のリリースは、 Unified RTMT のバージョンが異なるコンピュータ(Unified Communications Manager リリースごとに 1 個のバージョン)にインストールする必要があります。 インストールする Unified RTMT バージョンが、モニタ対象の製品と互換性があることを確認します。 使用している Unified RTMT バージョンがモニタ対象のサーバーと互換性がない場合、互換性のあるバージョンをダウンロードするように求められます。
- コンピュータでは、実行する Unified RTMT の最後のインスタンスに基づいて、IP アドレスや Unified RTMT フレーム サイズなどのユーザ設定を保存します。
(注) |
標準監査ユーザと Standard CCM Super Users の権限を持つ管理者だけが Unified RTMT 機能にアクセスできます。 これらの権限のないアプリケーションユーザーが Unified RTMT にログインした場合、コール制御検出(CCD)や Service Advertisement Framework(SAF)などの機能の一部は期待どおりに機能しません。 |
(注) |
Linux ワークステーションでは、ルート アクセスを使用して RTMT を実行します。 そうしない場合、最初に RTMT をインストールするときに、アプリケーションが起動しません。 |
-
現在の Unified RTMT では、JRE を実行する必要があります。 システムに JRE がインストールされていることを確認します(Java 1.8)。
手順
ステップ 1 |
設定の管理インターフェイスの [プラグイン(Plug-ins)]ウィンドウに移動します。
|
||||||||
ステップ 2 |
[検索(Find)] をクリックします。 |
||||||||
ステップ 3 |
Microsoft Windows オペレーティング システムを実行しているクライアントで Unified RTMT をインストールするには、[Real-Time Monitoring Tool - Windows] の [ダウンロード(Download)]リンクをクリックします。 Linux オペレーティング システムを実行しているクライアントで Unified RTMT をインストールするには、[Real-Time Monitoring Tool - Linux] の [ダウンロード(Download)]リンクをクリックします。
|
||||||||
ステップ 4 |
クライアント上の優先ロケーションに実行可能ファイルをダウンロードします。 |
||||||||
ステップ 5 |
Windows バージョンをインストールするには、デスクトップ上に表示される Unified RTMT アイコンをダブルクリックするか、ファイルをダウンロードしたディレクトリを見つけて Unified RTMT インストール ファイルを実行します。 抽出プロセスが開始されます。 |
||||||||
ステップ 6 |
Linux バージョンをインストールするには、ファイルに実行権限があることを確認します。たとえば、コマンドchmod +x CcmServRtmtPlugin.bin(大文字と小文字を区別)を入力します。 |
||||||||
ステップ 7 |
Unified RTMT のようこそウィンドウが表示されたら、[次へ(Next)]をクリックします。 |
||||||||
ステップ 8 |
ライセンス契約書を承認するには、[使用許諾契約書の条項に同意します(I accept the terms of the license agreement)]をクリックし、[次へ(Next)]をクリックします。 |
||||||||
ステップ 9 |
Unified RTMT のインストール画面にプロンプト表示されるように、システムから実行可能な Java 仮想マシンの絶対パスを選択します(JRE インストール済みディレクトリからの java.exe、これは最新バージョン 1.8 です)。 |
||||||||
ステップ 10 |
Unified RTMT をインストールする場所を選択します。 デフォルトの場所を使用しない場合は、[参照(Browse)]をクリックして別の場所に移動します。 [次へ(Next)]をクリックします。 |
||||||||
ステップ 11 |
インストールを開始するには、[次へ(Next)]をクリックします。 [セットアップ ステータス(Setup Status)]ウィンドウが表示されます。 |
||||||||
ステップ 12 |
インストールを完了するには、[完了(Finish)]をクリックします。 |
(注) |
Real-Time Monitoring Tool の使用方法の詳細については、『 Cisco Unified Real-Time Monitoring Tool アドミニストレーションガイド』を参照してください。 |
Kerneldump ユーティリティの有効化
次の手順を利用して Kerneldump ユーティリティをイネーブル化します。 カーネル クラッシュが発生した場合、ユーティリティは、クラッシュの収集とダンプのメカニズムを提供します。 ローカル サーバまたは外部サーバにコアをダンプするユーティリティを設定できます。
手順
ステップ 1 |
コマンドライン インターフェイスにログインします。 |
ステップ 2 |
次のいずれかを実行します。
|
ステップ 3 |
サーバをリブートします。 |
ライセンスをインストール
必要なライセンスを取得していることを確認してください。
Unified Communications Manager の要件
Cisco Smart Software Manager または Cisco Smart Software Manager サテライトを使用して、Unified Communications Manager のライセンスを管理します。 ライセンスの取得方法の詳細については、 Cisco Unified Communications Manager システム設定ガイドの "Smart Software Licensing" の章を参照してください。
IM and Presence Service の要件
IM and Presence Service は、サーバーライセンスまたはソフトウェア バージョン ライセンスを必要としません。
バックアップを構成する
定期的にバックアップを実行することをお勧めします。 ディザスタ リカバリ システム(DRS)を使用して、クラスタ内のすべてのサーバのデータを完全にバックアップできます。 自動バックアップをセットアップすることも、任意の時点でバックアップを起動することもできます。
手動バックアップを開始するか、バックアップスケジュールを設定することができます。 詳細については、『『Administration Guide for Cisco Unified Communications Manager』』の「システムのバックアップ」の章を参照してください。
ロケールのインストール
Unified Communications Manager と IM and Presence Service を設定して複数の言語をサポートすることができます。 インストール可能なサポート言語の数に制限はありません。
Cisco は、Unified Communications Manager ロケール インストーラのロケール固有のバージョンと IM and Presence Service ロケールインストーラを www.cisco.com で提供しています。 このロケール インストーラはシステム管理者がインストールします。このインストーラを使用すると、ユーザーがサポートされているインターフェイスを使用するときに、選択した翻訳済みテキストまたはトーン(使用可能な場合)を表示または受信できます。
Unified Communications Manager または IM & Presence Service のアップグレードの場合、すべてのアップグレードと移行が完了した後で、ロケールをインストールする必要があります。 アップグレードの場合、デフォルトでインストールされる米国英語を除き、使用しているすべてのロケールを再インストールする必要があります。 Unified Communications Manager ノードまたは IM and Presence Service ノードのメジャーマイナーバージョン番号に一致するロケールの最新バージョンをインストールします。
クラスタのすべてのノードに Unified Communications Manager をインストールし、データベースをセットアップした後で、ロケールをインストールします。 IM and Presence Service ノードに特定のロケールをインストールする場合、最初に Unified Communications Manager クラスタの同じ国の Unified Communications Manager ロケールファイルをインストールする必要があります。
ソフトウェアのアップグレードが完了したら、次のセクションの情報を使用して、Unified Communications Manager ノードと IM and Presence Service ノードにロケールをインストールします。
ユーザ ロケール
ユーザ ロケール ファイルは、特定の言語と国に関する言語情報が含まれます。 ユーザ ロケール ファイルは、ユーザが選択したロケールの電話機表示用の翻訳済みテキストとボイス プロンプト(使用可能な場合)、ユーザ アプリケーション、および Web ページを提供します。 これらのファイル名の表記は、次のとおりです。
-
cm-locale-language-country-version.cop (Unified Communications Manager)
-
ps-locale-language_country-version.cop(IM and Presence Service)
ネットワーク ロケール
ネットワーク ロケール ファイルは、電話トーン、アナンシエータ、ゲートウェイ トーンなど、さまざまなネットワーク項目の国固有のファイルを提供します。 複合ネットワーク ロケール ファイル名の表記は、次のとおりです。
-
cm-locale-combinednetworklocale-version.cop (Unified Communications Manager)
1 つのロケール インストーラに複数のネットワーク ロケールが組み合されている場合があります。
ロケール ファイルは、ソフトウェア アップグレードをインストールする場合と同じプロセスを使用して、ローカル ソースまたはリモート ソースからインストールできます。 クラスタの各ノードに、複数のロケール ファイルをインストールできます。 クラスタ内のすべてのノードをリブートしないと、変更は有効になりません。 クラスターのすべてのノードにすべてのロケールをインストールするまでは、ノードを再起動しないことを強く推奨します。 通常の業務時間後にノードをリブートして、コール処理の中断を最小限にとどめてください。
新しいロケールをインストールする
この手順を使用して、Unified Communications Manager または IM and Presence Service に新しいロケールをインストールします。 両方の製品にロケールをインストールする場合、次の順序ですべてのクラスターノードにロケールをインストールします。
-
Unified Communications Manager パブリッシャノード
-
Unified Communications Manager サブスクライバ ノード
-
IM and Presence データベース パブリッシャ ノード
-
IM and Presence サブスクライバノード
始める前に
新しいロケールをインストールする前に、すべてのクラスタノードで Unified Communications Manager または IM and Presence Service のインストールまたはアップグレードが完了していることを確認してください。
手順
ステップ 1 |
cisco.com でお使いのリリースのロケールインストーラーを検索します。
|
ステップ 2 |
お使いのリリースのロケール インストーラを、SFTP をサポートするサーバにダウンロードします。 |
ステップ 3 |
管理者アカウントを使用して Cisco Unified OS Administration にログインします。 |
ステップ 4 |
を選択します。 |
ステップ 5 |
[ソフトウェアインストール/アップグレード(Software Installation/Upgrade)] ウィンドウで、次のフィールドを入力します。
|
ステップ 6 |
[次へ(Next)]をクリックします。 |
ステップ 7 |
サーバにロケールをダウンロードしてインストールします。 |
ステップ 8 |
サーバを再起動します。 更新はサーバの再起動後に有効になります。 |
ステップ 9 |
すべての Unified Communications Manager および IM and Presence Service クラスタノードで順番にこの手順を繰り返します。 |
(注) |
すべてのクラスターノードに新しいロケールがインストールされるまで、エンドユーザのユーザロケールをリセットしないでください。 Unified Communications Manager と IM and Presence Service の両方のロケールをインストールする場合、ユーザーのロケールをリセットする前に、両方の製品のロケールをインストールする必要があります。 IM and Presence Service のロケールインストールが完了する前にエンドユーザーが電話言語をリセットした場合などの問題が発生した場合、セルフケアポータルを使用して電話言語を英語にリセットするようにユーザーに依頼します。 ロケールのインストールが完了したら、ユーザは電話の言語をリセットすることができます。または、一括管理を使用して、ロケールを適切な言語に一括で同期できます。 |
次のタスク
すべてのクラスター ノードのロケールのインストールが完了したら、エンド ユーザは新しいユーザ ロケールの使用を開始できます。
エラー メッセージ
ロケール インストーラをアクティベーションするときに発生する可能性のあるメッセージの説明については、次の表を参照してください。 エラーが発生した場合は、インストール ログにあるメッセージを表示できます。
メッセージ |
説明 |
---|---|
[LOCALE] File not found: <language>_<country>_user_locale.csv, the user locale has not been added to the database. |
このエラーは、システムがデータベースに追加するユーザロケール情報を含む CSV ファイルを見つけられない場合に発生します。 これはビルドプロセスでのエラーを示します。 |
[LOCALE] File not found: <country>_network_locale.csv, the network locale has not been added to the database. |
このエラーは、システムがデータベースに追加するネットワークロケール情報を含む CSV ファイルを見つけられない場合に発生します。 これはビルドプロセスでのエラーを示します。 |
[LOCALE] Communications Manager CSV file installer installdb is not present or not executable. |
このエラーは、 Unified Communications Manager アプリケーション installdb が必要であるために発生します。CSV ファイルに含まれる情報を読み取り、 Unified Communications Manager データベースに正しく適用します。 このアプリケーションが見つからない場合、Unified Communications Manager と一緒にインストールされていない(可能性は非常に低い)か、削除されているか(可能性が高い)、ノードに Unified Communications Manager がインストールされていない(可能性が最も高い)のいずれかです。 ロケールのインストールが終了します。データベースに保持される正確なレコードがなくてもロケールは機能しないためです。 |
[LOCALE] Could not create /usr/local/cm/application_locale /cmservices/ipma/com/cisco/ipma /client/locales/maDialogs_<ll>_<CC>.properties.Checksum. [LOCALE] Could not create /usr/local/cm/application_locale/cmservices/ ipma/com/cisco/ipma/client/locales/maMessages_ <ll>_<CC>.properties.Checksum. [LOCALE] Could not create /usr/local/cm/application_locale/cmservices/ ipma/com/cisco/ipma/client/locales/maGlobalUI_ <ll>_<CC>.properties.Checksum. [LOCALE] /usr/local/cm/ application_locale/cmservices/ipma/LocaleMasterVersion.txt.Checksum を作成できませんでした。 |
これらのエラーは、システムがチェックサム ファイルの作成に失敗した場合に発生します。原因としては、Java 実行ファイルの /usr/local/thirdparty/java/j2sdk/jre/bin/java が存在しない、Java アーカイブ ファイルの /usr/local/cm/jar/cmutil.jar が存在しないか損傷している、Java クラスの com.cisco.ccm.util.Zipper が存在しないか損傷していることなどが考えられます。 これらのエラーが発生する場合でも、Cisco Unified Communications Manager Assistant を除いてロケールは引き続き正常に動作します。この場合、Cisco Unified Communications Manager Assistant では、ローカライズされた Cisco Unified Communications Manager Assistant ファイルの変化を検出できません。 |
[LOCALE] UnifiedCMAssistant ロケール情報を更新するための /usr/local/cm/Application_locale/cmservices/ipma/LocaleMaster Version.txt が見つかりませんでした。 |
このエラーは、ファイルが正しい場所で見つからない場合に発生します。これは、ビルドプロセスのエラーが原因である可能性が高いです。 |
[LOCALE] Addition of <RPM-file-name> to the Unified Communications Manager database has failed! |
このエラーは、ロケールのインストール時に発生した障害の総計により発生します。終了状態を示します。 |
COP ファイルのインストールのガイドライン
インストールによっては、インストール後に COP ファイルをインストールして既知の欠陥を修正したり、Unified Communications Manager に同梱されていないカスタムデバイスタイプのサポートを有効にする必要があります。
COP ファイルをインストールする必要がある場合は、これらのガイドラインに従ってください。
-
クラスター内の各ノードに適切な COP ファイルをインストールしてください。 クラスタの各ノードに新しいソフトウェアをインストールする前に、データベースをセットアップした後に、このタスクを実行します。
-
COP ファイルをインストールしたら、ノードを再起動する必要があります。
-
Unified Communications Manager および/または IM and Presence Service を再起動して、COP ファイルのインストール中に行われた設定の変更がデータベースに書き込まれるようにします。
COP ファイルのインストール
北米番号プラン (システムのデフォルト) 以外の事前に構築されたダイヤルプランを使用する場合は、ダイヤルプランと共に COP ファイルをインストールする必要があります。
手順
ステップ 1 |
Unified Communications Manager のパブリッシャ ノードで、この手順を開始します。 Cisco Unified Communications OS 管理で、 を選択します。 |
ステップ 2 |
[ソース(Source)] フィールドで、[リモート ファイル システム(Remote File System)] を選択します。 |
ステップ 3 |
[ソフトウェアのインストール/アップグレード(Software Installation/Upgrade)]ウィンドウで、フィールドを設定します。 フィールドとその設定オプションの詳細については、「関連項目」を参照してください。 |
ステップ 4 |
[次へ(Next)]をクリックします。 |
ステップ 5 |
[オプション/アップグレード(Options/Upgrades)] ドロップダウンリストで、[DP COP] ファイルを選択して、[次へ(Next)] をクリックします。 |
ステップ 6 |
[チェックサム(Checksum)] ウィンドウが表示されたら、そのチェックサムの値をダウンロードしたファイルのチェックサムの値と比較検証します。 |
ステップ 7 |
[次へ(Next)] をクリックして、ソフトウェア アップグレードに進みます。 |
ステップ 8 |
[インストール(Install)]をクリックします。 |
ステップ 9 |
[終了(Finish)]をクリックします。 |
ステップ 10 |
Unified Communications Manager サブスクライバ ノードで、この手順を繰り返します。 クラスタ内の全ノードに COP ファイルをインストールする必要があります。 |
次のタスク
システムにダイヤルプランを適用するには、 事前作成済みダイヤル プランのインストール。
事前作成済みダイヤル プランのインストール
クラスタの始まりに、それぞれの Unified Communications Manager ノードに国内の番号計画をインストールします。 Unified Communications Manager publisher ノードから始めます。
(注) |
北米以外の国の国内番号計画をインストールする場合にのみ、この手順を完了します(システムのデフォルトは北米)。 |
始める前に
事前に構築されたダイヤルプランを含む COP ファイルをインストールします。 詳細については、COP ファイルのインストールを参照してください。
手順
ステップ 1 |
Cisco Unified Communications Manager Administration で、 を選択します。 |
ステップ 2 |
検索条件を入力して [検索(Find)] をクリックします。 |
ステップ 3 |
インストールするダイヤル プランのバージョンを [利用可能なバージョン(Available Version)] ドロップダウンリストから選択します。 |
ステップ 4 |
[インストール(Install)]をクリックします。 |
ステップ 5 |
クラスターのサブスクライバ ノードごとにこの手順を繰り返します。 |
次のタスク
Cisco CallManager サービスを再起動します
新しいダイヤル プランをインストールした場合、Cisco CallManager サービスを再起動する必要があります。
手順
ステップ 1 |
Cisco Unified Serviceability インターフェイスで、 を選択します。 |
ステップ 2 |
[サーバ(Servers)]ドロップダウンリストから、Cisco Unified Communications Manager サーバを選択します。 |
ステップ 3 |
Cisco CallManager サービスに対応するラジオ ボタンをクリックします。 |
ステップ 4 |
再起動(Restart)をクリックします。 |
セキュリティの有効化
システムのセキュリティを有効にする場合は、Cisco CTL クライアントをインストールし、混合モードを有効にする必要があります。
ウィンドウから、Cisco Unified CM Administration で、CTL インストール ファイルをダウンロードできます。混合モードが有効になると、システムは、認証に証明書信頼リスト(CTL)ファイルを使用します。CTL ファイルには、サーバごとのサーバ証明書、公開キー、シリアル番号、署名、発行者名、サブジェクト名、サーバ機能、DNS 名、および IP アドレスが含まれています。
CTL クライアントをインストールし、システムで混合モードを有効にする方法の詳細については、『Cisco Unified Communications Manager のセキュリティガイダンス』を参照してください。
簡易ネットワーク管理プロトコルを設定する
Cisco Prime Collaboration などのネットワーク管理システムを使用している場合は、Simple Network Management Protocol を有効にします。
始める前に
お使いのシステムは 10 件を超える同時実行のクエリを許可していません。 最大で 8 つのトラップ宛先を推奨します。これ以上の値は CPU パフォーマンスに影響を与えます。 この要件は、使用する OVA テンプレートに関係なく、すべてのインストールに適用されます。
手順
ステップ 1 |
SNMP NMS をインストールして設定します。 |
ステップ 2 |
[ コントロールセンター - ネットワークサービス ] ウィンドウで、システムが SNMP サービスを開始していることを確認します。 |
ステップ 3 |
Unified Communications Manager:[サービスのアクティベーション] ウィンドウで、Cisco CallManager SNMP サービスを有効にします。 Cisco Unity Connection のみ: Connection SNMP エージェント サービスは自動的にアクティベートされます。 |
ステップ 4 |
SNMP V1/V2c を使用している場合、コミュニティ文字列を設定します。 |
ステップ 5 |
あなたがSNMP V3 を使用している場合、SNMP ユーザを設定します。 |
ステップ 6 |
トラップまたはインフォームの通知先を設定します。 |
ステップ 7 |
MIB2 システムグループのシステム連絡先と場所を設定します。 |
ステップ 8 |
CISCO-SYSLOG-MIB のトラップ設定を設定します。 |
ステップ 9 |
Unified Communications Manager のみ:CISCO-CCM-MIB のトラップ設定を行います。 |
ステップ 10 |
プライマリエージェントサービスを再起動します。 |
ステップ 11 |
NMS で、 Unified Communications Manager トラップパラメータを設定します。 |
仮想マシン構成の仕様の変更
以下の手順を使用して、Unified Communications Manager 仮想マシン (VM) 設定でゲスト OS バージョンに変更します。
手順
ステップ 1 |
仮想マシンをシャットダウンします。 |
||||
ステップ 2 |
必要に応じて vSphere 経由で仮想マシンの構成を変更します。 ゲスト OS と VM ハードウェアの互換性レベルを更新できます。
|
||||
ステップ 3 |
仮想マシンの電源をオンにします。
|