Max Forward (Max. doorschakelen)
|
Hiermee wordt de waarde voor maximaal doorschakelen voor SIP opgegeven.
Voer een van de volgende handelingen uit:
Waardebereik: 1 tot 255
Standaard: 70
|
Max Redirection (Max. omleiding)
|
Hiermee wordt het aantal keren opgegeven dat een uitnodiging kan worden omgeleid om een oneindige lus te voorkomen.
Voer een van de volgende handelingen uit:
Standaard: 5
|
Max. verificatie
|
Hiermee wordt het maximum aantal keren (tussen 0 en 255) opgegeven dat een verzoek kan worden gecontroleerd.
Voer een van de volgende handelingen uit:
Toegestane waarde: 0 tot 255
Standaard: 2
|
SIP User Agent Name (UA-naam (User Agent) voor SIP)
|
Gebruikt bij uitgaande verzoeken.
Voer een van de volgende handelingen uit:
Standaard: $VERSION
Indien deze waarde leeg is, wordt de header niet opgenomen. Macro-uitbreiding van $A naar $D overeenkomend met GPP_A naar
GPP_D toegestaan
|
SIP-servernaam
|
Serverheader gebruikt in antwoorden op inkomende antwoorden.
Voer een van de volgende handelingen uit:
Standaard: $VERSION
|
SIP Reg User Agent Name (UA-naam (User Agent) voor SIP-registratie)
|
Naam van User Agent die moet worden gebruikt in een REGISTER-aanvraag. Als deze naam niet wordt opgegeven, wordt SIP User
Agent Name ook gebruikt voor de REGISTER-aanvraag.
Voer een van de volgende handelingen uit:
-
Voer in het telefoonconfiguratiebestand met XML(cfg.xml) een tekenreeks in de volgende notatie in: <SIP_Reg_User_Agent_Name ua="na">agent name</SIP_Reg_User_Agent_Name>
-
Voer de juiste naam in op de webpagina van de telefoon.
Standaard: leeg
|
SIP Accept Language (SIP-acceptatietaal)
|
Header Accept-Language gebruikt.
Voer een van de volgende handelingen uit:
Er is geen standaardinstelling. Indien deze waarde leeg is, wordt de header niet opgenomen.
|
DTMF Relay MIME-Type
|
MIME-type dat wordt gebruikt in een SIP INFO-bericht om een DTMF-gebeurtenis aan te geven. Dit veld moet overeenkomen met
dat van de serviceprovider.
Voer een van de volgende handelingen uit:
Standaard: application/dtmf-relay
|
Hook Flash MIME Type
|
MIME-type wordt gebruikt in een SIPINFO-bericht om een hookflash-gebeurtenis aan te geven.
Voer een van de volgende handelingen uit:
Standaard:
|
Remove Last Reg (Laatste reg. verwijderen)
|
Hiermee kunt u de laatste registratie verwijderen voordat u een nieuwe registreert als de waarde afwijkt.
Stel dit in op Yes (Ja) om de laatste registratie te verwijderen.
Voer een van de volgende handelingen uit:
Toegestane waarden: Ja of Nee
Standaard: Nee
|
Use Compact Header (Compacte header gebruiken)
|
Indien deze waarde wordt ingesteld op ja, worden op de telefoon SIP-headers in uitgaande SIP-berichten gebruikt. Indien inkomende
SIP-aanvragen normale headers bevatten, worden de inkomende headers op de telefoon vervangen door compacte headers. Indien
deze waarde wordt ingesteld op nee, worden normale SIP-headers gebruikt. Als inkomende SIP-aanvragen compacte headers bevatten,
worden op de telefoon dezelfde compacte headers hergebruikt bij het genereren van het antwoord, ongeacht deze instelling.
Voer een van de volgende handelingen uit:
Toegestane waarden: Ja of Nee
Standaard: Nee
|
Escape Display Name (Weergavenaam bij Escape)
|
Hiermee kunt u de weergavenaam vertrouwelijk houden.
Stel dit in op Yes (Ja) als u wilt dat de tekenreeks (die is geconfigureerd in de weergavenaam) door de IP-telefoon tussen
dubbele aanhalingstekens wordt geplaatst voor uitgaande SIP-berichten.
Voer een van de volgende handelingen uit:
Toegestane waarden: Ja of Nee
Standaard: Ja
|
Talk Package
|
Hiermee wordt ondersteuning van BroadSoft Talk Package ingeschakeld waarmee gebruikers een gesprek kunnen beantwoorden of
hervatten door te klikken op een knop in een externe toepassing.
Voer een van de volgende handelingen uit:
Toegestane waarden: Ja of Nee
Standaard: Nee
|
Hold Package
|
Hiermee wordt ondersteuning van BroadSoft Hold Package ingeschakeld waarmee gebruikers een gesprek in de wacht kunnen zetten
door te klikken op een knop in een externe toepassing.
Voer een van de volgende handelingen uit:
Toegestane waarden: Ja of Nee
Standaard: Nee
|
Conference Package
|
Hiermee wordt ondersteuning van BroadSoft Conference Package ingeschakeld waarmee gebruikers een conferentiegesprek kunnen
starten door te klikken op een knop in een externe toepassing.
Voer een van de volgende handelingen uit:
Toegestane waarden: Ja of Nee
Standaard: Nee
|
RFC 2543 Call Hold (RFC 2543 gesprek in de wacht)
|
Als deze waarde wordt ingesteld op ja, bevat de eenheid c=0.0.0.0-syntaxis in SDP bij het verzenden van een nieuwe SIP INVITE
naar de andere kant om het gesprek in de wacht te zetten. Als deze waarde wordt ingesteld op nee, bevat de eenheid de c=0.0.0.0-syntaxis
niet in de SDP. De eenheid bevat in beide gevallen altijd een a=sendonly-syntaxis in de SDP.
Voer een van de volgende handelingen uit:
Toegestane waarden: Ja of Nee
Standaard: Ja
|
Random REG CID on Reboot (Willekeurig REG CID bij reboot)
|
Indien ingesteld op Ja, gebruikt de telefoon een andere willekeurige gespreks-id voor registratie na de volgende reboot van
de software. Indien ingesteld op Nee, probeert de Cisco IP-telefoon dezelfde oproep-id te gebruiken voor registratie na de
volgende reboot van de software. De Cisco IP-telefoon gebruikt altijd een nieuwe willekeurige gespreks-id voor registratie
na een stroomuitschakeling, ongeacht deze instelling.
Voer een van de volgende handelingen uit:
Standaard: Nee.
|
SIP TCP Port Min (Min. TCP-poort voor SIP)
|
Hiermee wordt het laagste TCP-poortnummer opgegeven dat kan worden gebruikt voor SIP-sessies.
Voer een van de volgende handelingen uit:
Standaard: 5060
|
SIP TCP Port Max (Max. TCP-poort voor SIP)
|
Hiermee wordt het hoogste TCP-poortnummer opgegeven dat kan worden gebruikt voor SIP-sessies.
Voer een van de volgende handelingen uit:
Standaard: 5080
|
Caller ID Header (Header beller-id)
|
Biedt de mogelijkheid om de beller-id van de header PAID-RPID-FROM, PAID-FROM, RPID-PAID-FROM, RPID-FROM of FROM te gebruiken.
Voer een van de volgende handelingen uit:
Toegestane waarden: PAID-RPID-FROM, AID-FROM, RPID-PAID-FROM, RPID-FROM en FROM
Standaard: PAID-RPID-FROM
|
Hold Target Before Refer (Bestemming in de wacht voor doorverbinden)
|
Bepaalt of het gesprekspad voor doorverbinden moet wachten voordat REFER wordt verzonden naar de doorverbonden partij wanneer
u een aangekondigde doorverbonden oproep start (waarbij de doorverbindbestemming heeft geantwoord).
Voer een van de volgende handelingen uit:
Standaard: Nee
|
Dialoogvenster SDP inschakelen
|
Als dit is ingeschakeld en de tekst van de melding te lang is en gefragmenteerd wordt, wordt het dialoogvenster Notify message
xml (Meldingsbericht XML) vereenvoudigd. Session Description Protocol (SDP) wordt niet opgenomen in de XML-inhoud in het dialoogvenster.
Voer een van de volgende handelingen uit:
Toegestane waarden: Ja of Nee
Standaard: Nee
|
Keep Referee When Refer Failed (Doorverbondene houden wanneer doorverbinden mislukt)
|
Indien ingesteld op Ja, wordt de telefoon geconfigureerd voor het onmiddellijk afhandelen van NOTIFY (MELDEN) sipfrag-berichten.
Voer een van de volgende handelingen uit:
Toegestane waarden: Ja of Nee
Standaard: Nee
|
Display Diversion Info (Omleidingsinformatie weergeven)
|
Hiermee wordt de omleidingsinformatie weergegeven die in SIP-berichten op LCD is opgenomen of niet.
Voer een van de volgende handelingen uit:
Toegestane waarden: Ja of Nee
|
Display Anonymous From Header (Anoniem weergeven in koptekst)
|
Geef de beller-id van de koptekst 'Van' in het bericht SIP INVITE (UITNODIGEN) weer, indien ingesteld op Ja, zelfs als het
gesprek een anoniem gesprek is. Wanneer de parameter is ingesteld op Nee, wordt Anonieme beller weergegeven als beller-id.
Voer een van de volgende handelingen uit:
Toegestane waarden: Ja of Nee
Standaard: Nee
|
Sip Accept Encoding (SIP accept-codering)
|
Ondersteunt de gzip-functie voor content-encoding.
Als gzip wordt geselecteerd, bevat de SIP-berichtkop de tekenreeks 'Accept-Encoding: gzip'. De telefoon kan de SIP-berichttekst
verwerken, die is gecodeerd met de gzip-indeling.
Voer een van de volgende handelingen uit:
Toegestane waarden: none en gzip
Standaardwaarde: none (geen)
|
SIP IP-voorkeur
|
Bepaalt of de telefoon IPv4 of IPv6 gebruikt.
Voer een van de volgende handelingen uit:
Toegestane waarden: IPv4/IPv6
Standaard: IPv4.
|
Lokale naam voor koptekst uitschakelen
|
Hiermee wordt de weergavenaam in Directory (Adresboek), Call History (Gespreksgeschiedenis) en in de koptekst To (aan) bepaald
tijdens een uitgaand gesprek.
Voer een van de volgende handelingen uit:
Toegestane waarden: Ja/Nee
Standaard: Nee
|