Cisco Catalyst 9130AX 系列存取點
意見本產品是Catalyst 9100系列接入點的一部分。檢視其他Catalyst 9100支援內容>
支援的型號：
- Cisco Catalyst 9130AXE存取點
- Cisco Catalyst 9130AXI存取點
-
熱門搜尋結果
重要資料
客戶也檢視了
近期資安公告
- 08-May-2024
- 05-Oct-2023
- 29-Sep-2023
-
資料表和產品資訊
-
資安公告
-
Applicable to Multiple Models
- Field Notice: FN74109 - Access Point Image Corruption During CAPWAP Upgrade May Result in Boot Failure - Software Upgrade Recommended
- Field Notice: FN72258 - Some C9130AXI and C9130AXE APs Fail to Join Controllers That Run AireOS Released Earlier Than July 2021 - Software Upgrade Recommended
- Field Notice: FN72424 - Later Versions of Some Wi-Fi 6 Access Points Fail to Join the WLAN Controller - Software Upgrade Recommended
欄位聲明
-
-
版本和相容性
-
參考
- Detailed Channels and Maximum Power Settings for Cisco Catalyst 9130AXE Indoor Access Points, Release 17.3.6 (ZIP - 71 MB)
- Detailed Channels and Maximum Power Settings for Cisco Catalyst 9130AXI Indoor Access Points, Release 17.3.6 (XLSX - 35 MB)
- Detailed Channels and Maximum Power Settings for Cisco Catalyst 9130AXE Indoor Access Points, Release 17.9.2 (XLSX - 244 MB)
- Detailed Channels and Maximum Power Settings for Cisco Catalyst 9130AXI Indoor Access Points, Release 17.9.2 (XLSX - 39 MB)
- Detailed Channels and Maximum Power Settings for Cisco Catalyst 9130AXE Indoor Access Points, Release 17.6.1 (XLSX - 244 MB)
- Detailed Channels and Maximum Power Settings for Cisco Catalyst 9130AXI Indoor Access Points, Release 17.6.1 (XLSX - 39 MB)
技術參考
-
設計
-
安裝與升級
- 將 Catalyst 9100 存取點轉換成嵌入式無線控制器
安裝和升級技術筆記
-
設定
-
Applicable to Multiple Models
- 排除COS AP故障
- 配置RRM以延遲通道外掃描並禁用通道外監視
配置示例和技術筆記
-
-
維護與營運
-
疑難排解
- Fastlane+ FAQ (PDF - 184 KB)
Support FAQ
-
Applicable to Multiple Models
- 建議使用的 AireOS 無線 LAN 控制器版本
- 在Catalyst 9800無線控制器上以監聽器模式設定存取點
- 預設網關IP地址指向無線客戶端的ARP響應
- 非思科（第三方）天線的Cisco TAC支援宣告
疑難排解技術筆記
-
登入即可查看可下載的項目。
-
