Step 2 |
show inventory [raw] [entity Enter theshowinventory command to retrieve and display information about all of the Cisco products installed in the networking device that are assigned a PID, VID, and SN. If a Cisco entity is not assigned a PID, that entity is not retrieved or displayed.
Example: Router# show inventory NAME: “Chassis”, DESCR: “12008/GRP chassis” PID: GSR8/40 , VID: V01, SN: 63915640 NAME: “slot 0”, DESCR: “GRP” PID: GRP-B , VID: V01, SN: CAB021300R5 NAME: “slot 1”, DESCR: “4 port ATM OC3 multimode” PID: 4OC3/ATM-MM-SC , VID: V01, SN: CAB04036GT1 NAME: “slot 3”, DESCR: “4 port 0C3 POS multimode” PID: LC-4OC3/POS-MM , VID: V01, SN: CAB014900GU NAME: “slot 5”, DESCR: “1 port Gigabit Ethernet” PID: GE-GBIC-SC-B , VID: V01, SN: CAB034251NX NAME: “slot 7”, DESCR: “GRP” PID: GRP-B , VID: V01, SN: CAB0428AN4O NAME: “slot 16”, DESCR: “GSR 12008 Clock Scheduler Card” PID: GSR8-CSC/ALRM , VID: V01, SN: CAB0429AUYH NAME: “sfslot 1”, DESCR: “GSR 12008 Switch Fabric Card” PID: GSR8-SFC , VID: V01, SN: CAB0428ALOS NAME: “sfslot 2”, DESCR: “GSR 12008 Switch Fabric Card” PID: GSR8-SFC , VID: V01, SN: CAB0429AU0M NAME: “sfslot 3”, DESCR: “GSR 12008 Switch Fabric Card” PID: GSR8-SFC , VID: V01, SN: CAB0429ARD7 NAME: “PSslot 1”, DESCR: “GSR 12008 AC Power Supply” PID: FWR-GSR8-AC-B , VID: V01, SN: CAB041999CW Enter theshowinventorycommand with an entity argument value to display the UDI information for a specific type of Cisco entity installed in the networking device. In this example, a list of Cisco entities that match the sfslot argument string is displayed.
Example: Router# show inventory sfslot NAME: “sfslot 1”, DESCR: “GSR 12008 Switch Fabric Card” PID: GSR8-SFC , VID: V01, SN: CAB0428ALOS NAME: “sfslot 2”, DESCR: “GSR 12008 Switch Fabric Card” PID: GSR8-SFC , VID: V01, SN: CAB0429AU0M NAME: “sfslot 3”, DESCR: “GSR 12008 Switch Fabric Card” PID: GSR8-SFC , VID: V01, SN: CAB0429ARD7 You can request even more specific UDI information using theshowinventorycommand with an entity argument value that is enclosed in quotation marks. In this example, only the details for the entity that exactly matches the sfslot 1 argument string are displayed.
Example: Router# show inventory “sfslot 1” NAME: “sfslot 1”, DESCR: “GSR 12008 Switch Fabric Card” PID: GSR8-SFC , VID: V01, SN: CAB0428ALOS For diagnostic purposes, theshowinventorycommand can be used with the raw keyword to display every RFC 2737 entity including those without a PID, UDI, or other physical identification.
Note |
The raw keyword option is primarily intended for troubleshooting problems with the showinventory command itself. |
Example: Router# show inventory raw NAME: “Chassis”, DESCR: “12008/GRP chassis” PID: , VID: V01, SN: 63915640 NAME: “slot 0”, DESCR: “GRP” PID: , VID: V01, SN: CAB021300R5 NAME: “slot 1”, DESCR: “4 port ATM OC3 multimode” PID: 4OC3/ATM-MM-SC , VID: V01, SN: CAB04036GT1 NAME: “slot 3”, DESCR: “4 port 0C3 POS multimode” PID: LC-4OC3/POS-MM , VID: V01, SN: CAB014900GU Enter theshowinventorycommand with the raw keyword and an entity argument value to display the UDI information for the Cisco entities that are installed in the networking device and that match the argument string, even if they do not contain an assigned PID.
Example: Router# show inventory raw slot NAME: “slot 0”, DESCR: “GRP” PID: , VID: V01, SN: CAB021300R5 NAME: “slot 1”, DESCR: “4 port ATM OC3 multimode” PID: 4OC3/ATM-MM-SC , VID: V01, SN: CAB04036GT1 NAME: “slot 3”, DESCR: “4 port 0C3 POS multimode” PID: LC-4OC3/POS-MM , VID: V01, SN: CAB014900GU |