hw-module profile packet-loss-alert
To enable log message alerts for traffic-impacting NPU interrupts, use the hw-module profile packet-loss-alert command in the XR Config mode.
hw-module profile packet-loss-alert { 3Min | | 5Min }
Syntax Description
3Min |
Specifies a 3 minute duration of packet loss to begin generating log messages. There are atleast 10 error interrupts per minute. |
5Min |
Specifies a 5 minute duration of packet loss to begin generating log messages. There are atleast 10 error interrupts per minute. |
Command Default
This feature is disabled by default.
Command Modes
XR Config mode
Command History
Release | Modification |
---|---|
Release 24.1.1 |
This command was introduced |
Usage Guidelines
Only line cards and routers with the Q100, Q200, P100 or G100 based Silicon One ASIC support this feature
Task ID
Task ID | Operation |
---|---|
profile | read, write |
Example
Execute the hw-module profile packet-loss-alert command to enable system log alerts for packet loss:
Router# configure
Router(config)# hw-module profile packet-loss-alert 3Min
Router(config)# commit