- Preface
- Cisco CRS Carrier Routing System 16-Slot Line Card Chassis Enhanced Router Overview
- Power Systems
- Cooling System
- Switch Fabric
- Line Cards and Physical Layer Interface Modules
- Route Processor
- Single-Chassis System Summary
- Control Plane
- Cisco CRS Carrier Routing System 16-Slot Line Card Chassis Enhanced Router Specifications
- Product IDs
Product IDs
This appendix provides information about the product structure, product IDs, and hardware compatibility. It contains:
The table lists system components, their product IDs (the part numbers to use to order the component), and descriptions.
Note
In the following tables, an equals sign (=) at the end of the product ID indicates that the component can be ordered as a spare. For those components, be sure to include the equals sign as part of the product ID. In the following tables, an equals sign (=) at the end of the product ID indicates that the component can be ordered as a spare. For those components, be sure to include the equals sign as part of the product ID.
NoteAlthough this appendix provides product IDs for routing system components, the Cisco online ordering and pricing tool has the most up-to-date information on the routing system and product IDs: Although this appendix provides product IDs for routing system components, the Cisco online ordering and pricing tool has the most up-to-date information on the routing system and product IDs:
http://www.cisco.com.
CCO login is required. Enter a search term such as “CRS” to view a list of components.
Chassis Product IDs
Table B-1 lists the PIDs for the Cisco CRS Carrier Routing System 16-Slot Line Card Chassis Enhanced router and its components.
CRS Hardware Compatibility
|
|
|
|
|---|---|---|
CRS 16 slot line card chassis for CRS-16/S-B |
||
|
|
||
S123 switch fabric cards for CRS-1 40G system S123 switch fabric cards for CRS-3 140G system |
||
S13 switch fabric cards for CRS-1 40G system S13 switch fabric cards for CRS-3 140G system |
||
|
|
||
Performance route processor (6GB memory) |
||
Additional route processor for the system (optional) |
||
| To order DRP cards separately, use the following IDs (both cards are required for DRP operation): |
||
|
|
||
CRS modular power AC kit for CRS-16/S-BAC power shelf for CRS-16/S-B |
||
CRS modular power DC kit for CRS-16/S-BDC power shelf for CRS-16/S-B |
||
|
|
||
|
|
||
|
|
||
| For detailed specifications for Cisco CRS-1 routing system PLIMs, RPs and other components refer to the data sheet on: |
||
| For additional information on Cisco CRS outing system SPA interface processor (SIP) and shared port adapters (SPAs), see Cisco CRS SIP and SPA Hardware Installation Guide . |
||
Table B-2 lists the compatibility of 40G CRS, 140G CRS, and 400G CRS fabric, forwarding, and line card components for the LCC system.
NoteA router with a mix of 40G, 140G, and 400G fabric cards is not a supported mode of operation. Such a mode is temporarily allowed only during the upgrade process. A router with a mix of 40G, 140G, and 400G fabric cards is not a supported mode of operation. Such a mode is temporarily allowed only during the upgrade process.
Feedback