Index

Contents

* - 4 - A - B - C - D - E - F - H - I - L - M - N - O - P - R - S - T - U - V - W - X

Index

*

*** 1

4

4GE SSM 1 2

A

AAA
authentication 1 2 3 4
authorization 1
messages 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
server 1 2 3 4 5 6 7 8 9
ABR
without backbone area 1
access denied
URL 1
access lists
See ACLs 1
access permittedUDP
access permittedTCP
access permitted 1
access requestedTCP
access requested 1
access-list command
deny-flow-max optionaccess-list deny-flow-max command 1
interval option 1
omitting 1
access-list commandaccess-list commandaccess-list commandaccess-list command
to permit traffic on UDP port 53 1
to permit traffic on UDP port 53access-list command 1 2 3
ACLs
ACL_ID 1 2
compilation out of memory 1
configuration error 1
crypto map 1
deny 1
deny-flows 1
empty ACL downloaded 1
failed check 1
logging matches 1
no ACL configured 1
packet denied 1
parsing error 1
peer context ID 1
peer context IDaccess-list commandaccess-list commandaccess-list command
to permit traffic on UDP port 53 1
peer IP address not set 1
proxy ID mismatch 1
SoftNP error 1 2
split tunneling policy 1
unsupported format 1
WebVPN
ACL ID not found 1
parse error 1 2 3
user authorization failure 1
address translation slots 1
no more available 1
no more available address translation slots, no more available 1
anchor count negative 1
area border router
See ABR 1
ARP packet mismatch 1
ARP poisoning attackattacks
ARP poisoning 1
ARP spoofing attack 1
asymmetric routing 1
attacks
ARP spoofing 1 2
DoS 1
spoofing 1 2 3
suspicious e-mail address pattern 1
Auth from IP address/port to IP address/port failed 1
Auth start for user 1
Authen Session End 1
authentication
failed 1
request 1
request succeeds 1
response 1
authorization
command 1
user 1
user denied 1
Auto Update URL unreachable 1

B

backup server list
downloadedEasy VPN Remote
backup server list
errorEasy VPN Remote
backup server list
bridge table
full 1
broadcast, invalid source address 1
built H245 connection 1

C

cannot specify PAT host 1
certificate data could not be verified 1
classes, logging
message class variables 1
types 1
clear command
local-host option 1
config commandconfig commandconfig command 1
configuration
erase 1
replication
beginning 1
failed 1
status changed 1 2
configure commandconfigure commandconfigure command 1
connection limit exceeded 1 2
connection limit exceededTCP
connection limit exceeded 1 2
CTIQBE
connection object pre-allocation 1
unsupported version 1

D

deny
inbound from outside 1
inbound ICMP 1
inbound UDP 1
inbound UDP due to query/response 1
IP from address to address 1
IP spoof 1
self route 1
TCP (no connection) 1
device pass through
disabledEasy VPN Remote
device pass through
enabledEasy VPN Remote
device pass through
DNS HINFO request attackattacks
DNS HINFO request 1
DNS query or response is denied 1
DNS request for all records attackattacks
DNS request for all records 1
DNS server too slow 1
DNS zone transfer attackattacks
DNS zone transfer 1
DNS zone transfer from high port attackattacks
DNS zone transfer from high port 1
DoS attackattacks
DoS 1 2 3

E

Easy VPN Remote
SUA
disabled 1
embryonic limit exceeded 1

F

failover
bad cable 1
block allocation failed 1
cable communication failed 1
cable not connected 1
cable status 1
configuration replication 1
configuration replication failed 1
continuous failovers 1 2
failover active command 1
failover command message dropped 1
incompatible software on mate 1
interface link down 1
LAN interface down 1
license mismatch with mate 1
lost communications with mate 1
mate card configuration mismatch 1
mate has different chassis 1
mate may be disabled 1
operational mode mismatch with mate 1
peer LAN link down 1
replication interrupted 1
show failover command 1 2
standby unit failed to sync 1
stateful error 1
stateful failover 1 2 3 4 5 6 7 8
VPN failover
buffer error 1
client being disabled 1
CTCP flow handle error 1
failed to allocate chunk 1
failed to initialize 1
memory allocation error 1
non-block message not sent 1
registration failure 1
SDI node secret file failed to synchronize 1
standby unit received corrupted message from active unit 1
state update message failure 1
timer error 1
trustpoint certification failure 1
trustpoint name not found 1
unable to add to message queue 1
version control block failure 1
failover command 1
active option 1
active optionfailover command
active optionfailover command
failover commandfailover command 1
failover messages 1 2 3 4
failover messagestesting
interface 1
filter allow command 1
filter command
allow optionfilter command
allow option 1
Flood Defender 1
floodguard commandfloodguard commandfloodguard command 1
flow control error 1
fragmented ICMP traffic attackattacks
fragmented ICMP traffic 1
FTP
data connection failed 1

H

H.225 1
H.245 connection
foreign addressH.245H.245 1
H.323
unsupported packet version 1
H.323H.323
back-connection, preallocated 1
handle not allocated 1
hello packet with duplicate router IDOSPF
hello packet with duplicate router ID 1
host limit 1
host move 1
hostile event 1
hostile eventhostile event
firewall circumventedhostile eventhostile event 1
HTTPS process limit 1

I

ICMP
packet deniedconduit command
permit ICMP option 1
packet denieddropping echo request 1
IDB initializatrionOSPF
IDB initializatrion 1
inbound TCP connection denied 1
inspect ESMTP command 1
insufficient memory
error caused by 1 2
interface
virtualinterface
PPP virtualvirtual interfacePPP virtual interface 1
zero bandwidthbandwidth
reported as zero 1
Internet phone, detecting use ofdetecting use of Internet phone 1
invalid character replaced in e-mail address 1
invalid source addresses 1
IP address
DHCP client 1
DHCP server 1
IP fragment attackattacks
IP fragment 1
IP fragments overlap attackattacks
IP fragments overlap 1
IP impossible packet attackattacks
IP impossible packet 1
IP route counter decrement failure 1
IP routing table
attackattacks
IP routing table 1 2
creation error 1
limit exceeded 1
limit warning 1
OSPF inconsistencyOSPF
IP routing table inconsistency 1
ip verify reverse-path command 1
ip verify reverse-path commandip verify reverse-path command 1
IPSec
connection entries 1
connections 1 2 3 4 5 6 7 8 9 10 11 12
failure 1
cTCP tunnel 1
encryption 1
fragmentation policy ignored 1
negotiation 1
over UDP 1 2
overTCP 1
packet triggered IKE 1
proposal
SA 1
unsupported 1
protocol 1
proxy mismatch 1
rekeying duration 1 2 3
request rejected 1
SA 1 2 3 4 5 6 7
proposal 1 2
tunnels 1 2 3 4 5 6 7 8 9 10 11

L

L2TP
tunnel 1
land attackattacks
land 1
large ICMP traffic attackattacks
large ICMP traffic 1
Leaving ALLOW mode, URL Server 1
link state advertisement
See LSA 1
link status Up or Down 1
load balancing cluster
disconnectedEasy VPN Remote
load balancing cluster
redirectedEasy VPN Remote
load balancing cluster
logging
classes
types 1
loopback network, invalid source address 1
lost failover communications with mate 1
LSA
default with wrong maskOSPF
LSA
invalid typeOSPF
LSA

M

MAC address mismatch 1
man in the middle attackattacks
man in the middle 1
memory
block depleted 1
corruptionOSPF
checksum error 1
insufficientinsufficient memory 1
leakLSA
not foundOSPF
lowlow memorylow memory
failed operation 1
message block alloc failed 1
messages
Mail Guard 1
SSH 1
stateful failover 1 2 3 4 5 6 7 8 9
variables used in 1
messages, logging
classes
list of 1
Microsoft Point-to-Point Encryption
See MPPE 1
MPPE
encryption policy setup 1
MS-CHAPMS-CHAP
authentication 1

N

nat command 1
no associated connection within connection tableTCP
no associated connection in table 1
no translation group foundpacket
not matched outbound NAT rules 1

O

OSPF
ABR without backbone area 1
configuration change 1
database request from unknown neighborOSPF
database description from unknown neighborOSPF
invalid packet 1
neighbor state changed 1
network range area changed 1
packet of invalid length 1
out of address translation slots! 1
outbound deny commandoutbound deny command 1

P

packet
denied 1 2 3 4
PAT
address 1 2 3
global address 1
host unspecified 1
pdb index error 1
ping of death attackattacks
ping of death 1
PPTP
packet out of sequence 1
tunnel 1 2
XGRE packet 1
preallocate H323 UDP back connection 1
privilege level, changed 1 2
proxied RPC request attackattacks
proxied RPC request 1

R

RADIUS authentication 1
RCMD, back connection failed 1
reload commandreload commandreload command 1 2
request discardedUDP
request discardedTCP
request discarded 1
router ID allocation failureOSPF
router ID allocation failure 1
rsh commandrsh commandrsh command 1

S

security
breach 1
context
added 1
context cannot be determined 1
removed 1
self route 1
SETUP message 1
Severity level 4
ASA-4-447001 1
show command
blocks optionshow command
blocks option 1
failover option 1 2 3
local-host option 1
outbound optionshow command
outbound option 1
static optionshow command
static option 1
static optionshow static command 1
version option 1
shuns 1
SIP connection 1
skinny connection 1
SMTP 1
software version mismatch 1
split network entry duplicateEasy VPN Remote
split network entry duplicate 1
spoofing attackattacks
spoofing 1 2 3 4
SSH 1
SSM 4GE 1 2
statd buffer overflow attackattacks
statd buffer overflow 1
stateful failover 1 2 3 4 5
SUA
disabledEasy VPN Remote
SUA
enabledEasy VPN Remote
SUA
SYN
attackattacks
SYN 1
SYNSYN
flag 1
system log messages
classes 1

T

TCP
connections 1
translation creation failedUDP
translation creation failedICMP
TCP FIN only flags attackattacks
TCP FIN only flags 1
TCP NULL flags attackattacks
TCP NULL flags 1
TCP state-bypass connection creation 1
TCP state-bypass connection teardown 1
TCP SYN+FIN flags attackattacks
TCP SYN+FIN flags 1
timeout uauth commandtimeout uauth command 1
timeouts, recommended values 1
too many connections on staticconnection limit exceeded 1
tunnel, PPTP 1

U

UDP
bomb attackattacks
UDP bomb 1
chargen DoS attackattacks
UDP chargen DoS 1
connections 1
messages 1
packet 1
snork attackattacks
UDP snork 1
unsupported application 1
URL
buffer block space 1
filtering, disabledweb requests, unfiltered 1
Server 1
user authentication
disabledEasy VPN Remote
user authentication
enabledEasy VPN Remote
user authentication
error 1
user logged out 1
username
created 1
deleted 1

V

variables
in messages 1
in messagesmessages
variables used in 1
list of 1
virtual linksOSPF
virtual linksrouter-ID resetOSPF
router-id resetOSPF
vpdn group command 1
VPN
peer limit 1
tunnel 1
VPN failover
client being disabled 1
CTCP flow handle error 1
failed to allocate chunk 1
failed to initialize 1
memory allocation error 1
non-block message not sent 1
registration failure 1
SDI node secret file failed to synchronize 1
standby unit received corrupted message from active unit 1
state update message failure 1
timer error 1
trustpoint certification failure 1
trustpoint name not found 1
unable to add to message queue 1
version control block failure 1

W

Websense server 1 2
write command 1
erase option 1
standby command 1
standby option 1
write commandwrite command 1
write erase commandwrite erase command 1

X

XAUTH enabledEasy VPN Remote
XAUTH enabled 1
XGRE, packet with invalid protocol field 1