Glossary


A
 
AAA
Authentication, Authorization, and Accounting. Network security services that provide the primary framework to set up access control on a router or access server. AAA is an architectural framework and modular means of configuring three independent, but closely related security functions in a consistent manner. It is flexible, scalable, and supports multiple authentication methods.


B
 
BCM
Broadcom.


C
 
CCIE
Cisco Certified Internetwork Expert. The CCIE program offers various CCIE certification in lab testing centers worldwide. This certification gives you an excellent opportunity to demonstrate your technical expertise, and can serve as an alternative to other CCIE designations toward fulfilling Cisco partner requirements.
CDE
Classification and Distribution Engine.
CDMA
Code Division Multiple Access. An access technology that combines each phone call with a code that only one cellular phone extracts from the air.
CLI
Command Line Interface. An interface that uses commands entered on a command line to configure and maintain network elements. You use the CLI to access the Cisco IOS software.
CP
CSG2 Control Processor.
CPLD
Complex Programmable Logic Device.
CSG2
Content Services Gateway - version 2.


D
 
DDR
Double Data Rate (RAM).


E
 
ECC
Error-Correcting Code. Memory that corrects errors on the fly.
EOBC
Ethernet Out of Band Channel.
ETSI
European Telecommunications Standards Institute. The European Telecommunications Standards Institute (ETSI) is an independent, non-profit organization, whose mission is to produce telecommunications standards for today and for the future. ETSI is officially responsible for standardization of Information and Communication Technologies ( ICT) within Europe. These technologies include telecommunications, broadcasting, and related areas, such as intelligent transportation and medical electronics.


F
 
FIFO
First In First Out.
FPGA
Field Programmable Gate Array.
FUR
Field-Upgradeable ROMMON.


G
 
GGSN
Gateway GPRS Support Node. A wireless gateway that allows mobile cell phone users to access the public data network.
GPRS
General Packet Radio Service. A service designed for GSM networks. GPRS is standardized by the European Telecommunications Standards Institute ( ETSI). Cisco Systems' GPRS solution enables mobile wireless service providers to supply their mobile subscribers with packet data services. A GPRS network has two essential elements: Serving GPRS Support Node ( SGSN) and Gateway GPRS Support Node ( GGSN).


H
 
HA
Home Agent. The Home Agent maintains mobile user registrations and tunnels packets destined for the mobile to the PDSN/FA (Packet Data Serving Node/Foreign Agent). It supports reverse tunneling, and can securely tunnel packets to the PDSN using IPSec. Broadcast packets are not tunneled. Additionally, the HA performs dynamic home address assignment for the mobile. Home address assignment can be from address pools configured locally, through either DHCP server access, or from the AAA (Authentication, Authorization, and Accounting) server
HSRP
Hot Standby Router Protocol. A Cisco routing protocol for fault-tolerant IP routing that enables a set of routers to work together to present the appearance of a single virtual router to the hosts on a LAN; used in environments where critical applications are running and fault-tolerant networks have been designed.


I
 
ICMP
Internet Control Message Protocol. A protocol that supports packets containing error, control, and informational messages.
ICT
Information and Communication Technologies. Through its core activities, working groups, and regional nodes, successfully served as a multi-stakeholder mechanism to facilitate and promote collaborative initiatives at the regional, subregional, and national levels and to mobilize new public and private resources to support information and communication technologies-for-development programs and projects. The ICT Task Force facilitated the pooling of relevant experience of both developed and developing countries and the sharing of lessons learned in introducing and promoting ICT.
IOS or Cisco IOS
Cisco Internet Operating System. Cisco system software that provides common functionality, scalability, and security for all products under the CiscoFusion architecture. Cisco IOS allows centralized, integrated, and automated installation and management of internetworks, while ensuring support for a wide variety of protocols, media, services, and platforms.
IPSec
Internet Protocol Security. IPSec is the network layer crypto platform for Cisco's security platforms (Cisco IOS Software, PIX, and so on). Originally described in RFCs 1825-1829, which are now obsolete, IPSec is currently discussed in a number of documents presented by the IETF IP Security Working Group. IPSec currently supports IP version 4 unicast packets. IPv6 and multicast support is coming later.
IPSec has the following strengths over current Cisco crypto offerings:

Multivendor: Since the IPSec framework is standardized, customers are not locked into any specific vendor's product. You will find IPSec on routers, firewalls, and client desktops (Windows, Mac, and so on).

Scalability: IPSec was designed with large enterprises in mind and therefore, it has "built-in" key management.

IXP
Intel IXP2800 Network Processor.


M
 
MIB
Management Information Base.
MSFC2
Multilayer Switch Feature Card 2. The Multilayer Switch Feature Card 2 quadruples the control plane and software forwarding performance of a Multilayer Switch Feature Card. The Multilayer Switch Feature Card 2 adds the following enhancements to the features already offered by the Multilayer Switch Feature Card:

Four times the control plane and forwarding performance of the MSFC

Support for Error-Correcting Code (ECC) DRAM with option to upgrade to 256 or 512 MB

Full Internet routing-table support

Support for 1000 terminated virtual LANs (VLANs)

Field-replaceable unit for Supervisor Engine 1A already equipped with MSFC

Enhanced Web Cache Control Protocol Version 2 (WCCPv2) and Cisco IOS server load balancing (SLB) performance

Enhanced multicast performance

MWAM
Multi-processor Wan Application Module.
MWG
Mobile Wireless Group.


N
 
NE
Network Element. A single piece of telecommunications equipment used to perform a function or service integral to the underlying network.
NTP
Network Time Protocol. NTP is a utility for synchronizing system clocks over the network, providing a precise time base for networked workstations and servers. In the NTP model, a hierarchy of primary and secondary servers pass timekeeping information by way of the Internet to cross-check and correct errors arising from equipment or propagation failures.


P
 
PDSN
Packet Data Serving Node. A node that provides the primary wireless mobile data access to the Internet and intranets using the CDMA2000 Radio Access Network environment.
PPC
Power PC.


Q
 
QoS
Quality of Service. Measure of performance for a transmission system that reflects its transmission quality and service availability.


R
 
RCAL
Remote CLI And Logging.
RCP
Route Processor Redundancy.
ROMMON
ROM-monitor. The ROM-monitor is a ROM-based program that is involved at power-up or reset, or when a fatal exception error occurs. The switch enters ROMMON mode if the switch does not find a valid software image, if the NVRAM configuration is corrupted, or if the configuration register is set to enter ROMMON mode. From the ROMMON mode, you can load a software image manually from Flash memory, from a network server file, or from bootflash. You can also enter ROMMON mode by restarting the switch and pressing Ctrl-C during the first five seconds of startup. When you enter ROMMON mode, the prompt changes to rommon 1>. Use the ? command to see the available ROMMON commands.
RPR+
Route Processor Redundancy Plus. A redundant processor module that contains the CPU, system software, and most of the memory components that are used in a router. Sometimes called a supervisory processor. The RPR+ has the following additional benefits over an RPR: reduced switchover time, installed module are not reloaded, allows OIR (On-line Insertion and Removal) for maintenance, synchronization of OIR events, and manual user-initiated switchover using the redundancy force-switchover command.


S
 
SAMI
Service Application Module for IP.
SANOS
Linux based Storage Area Network Operation System .
SEEPROM
Serial Electrically Erasable Programmable Read Only Memory.
SLB
Server Load Balancing. The Server Load Balancing feature is a Cisco IOS-based solution that provides server load balancing. This feature allows you to define a virtual server that represents a cluster of real servers, known as a server farm. When a client initiates a connection to the virtual server, the IOS SLB load balances the connection to a chosen real server, depending on the configured load balance algorithm or predictor.
SNMP
Simple Network Management Protocol. A common method by which network management applications can query a management agent using a supported management information base.
SP
Switch Processor.
SSA
Super Santa Ana Asic.
SSG
Service Selection Gateway. A Cisco product that provides flexible service selection, connectivity to multiple networks, and RADIUS proxy capability.
SSO
Stateful Switch Over.
SUP
Supervisor.
Supervisor
Hardware complex/card responsible for controlling and managing the system.
SVCLC
SerViCe Line Card.


T
 
TCB
Transmission Control Block or Transaction Control Block. It remembers incoming and outgoing requests, providing reliable retransmission of proxied requests and returning the best final response or responses back upstream. One transaction encompasses the received request, the request or requests (if forked) forwarded downstream, responses received from downstream hosts, and the best response returned upstream.
TP
CSG2 Traffic Processor.


U
 
UDP
User Datagram Protocol. A layer 4 IP protocol that provides for exchange of datagrams without acknowledgements or guaranteed delivery.


V
 
VLAN
Virtual Local Area Network.


W
 
WCCPv2
Web Cache Control Protocol Version 2. The Web Cache Communication Protocol (WCCP) feature allows you to use a Cisco Cache Engine to handle web traffic, reducing transmission costs and downloading time. This traffic includes user requests to view pages and graphics on World Wide Web servers, whether internal or external to your network, and the replies to those requests. When you request a page from a web server (located in the Internet), the router sends the request to a cache engine. If the cache engine has a copy of the requested page in storage, the cache engine sends you that page. Otherwise, the cache engine retrieves the requested page and the objects on that page from the web server, stores a copy of the page and its objects, and forwards the page and objects to you.

WCCP transparently redirects Hypertext Transfer Protocol (HTTP) requests from the intended server to a cache engine. You do not know that the page came from the cache engine rather than the originally requested web server.

WCCP v2 now contains the following new features:

Multiple router support

Improved security

Faster throughput

Redirection of multiple TCP port-destined traffic

Load distributing applications capability

Client IP addressing transparency