Cisco ONS SONET TL1 Command Quick Reference Guide, Release 9.8
Cisco ONS 15454, Cisco ONS 15454 M2, and Cisco ONS 15454 M6
Note The terms "Unidirectional Path Switched Ring" and "UPSR" may appear in Cisco literature. These terms do not refer to using Cisco ONS 15xxx products in a unidirectional path switched ring configuration. Rather, these terms, as well as "Path Protected Mesh Network" and "PPMN," refer generally to Cisco's path protection feature, which may be used in any topological network configuration. Cisco does not recommend using its path protection feature in any particular topological network configuration.
This guide lists TL1 commands and autonomous messages by category. It includes basic descriptions and input and output formats supported by the Cisco ONS 15454, Cisco ONS 15454 M2, and Cisco ONS 15454 M6. Refer to the Cisco ONS SONET TL1 Command Guide for a complete description of TL1 commands.
TL1 commands conform to the following syntax: a:b:c:d:e: ...z; where: "a" is the Command Code. "b" is the Target Identifier (TID). "c" is the Access Identifier (AID) or the User Identifier (UID). "d" is the Correlation Tag (CTAG). "e: ...z;" are other positions required for various commands. The TID, AID, and CTAG route and control the TL1 command. Other parameters provide additional information required to complete the action requested by the command.
Exercises the algorithm for switching from a working facility to a protection facility without actually performing a switch.
RTRV-<MOD_RING>:[<TID>]:[<AID>]:<CTAG>[::::];
Retrieves the BLSR information of the NE.
Output format:
SID DATE TIME M CTAG COMPLD "[<AID>]::[RINGID=<RINGID>],[NODEID=<NODEID>],[MODE=<MODE>], [RVRTV=<RVRTV>],[RVTM=<RVTM>],[SRVRTV=<SRVRTV>],[SRVTM=<SRVTM>], [EASTWORK=<EASTWORK>],[WESTWORK=<WESTWORK>],[EASTPROT=<EASTPROT>], [WESTPROT=<WESTPROT>]" ;
RTRV-TRC-<OCN_BLSR>:[<TID>]:<AID>:<CTAG>[::::];
Retrieves the valid J1 expected trace string, received trace string, trace mode, C2 byte, and STS bandwidth of the OC-N port if the port has a BLSR.
Output format:
SID DATE TIME M CTAG COMPLD "<AID>::[LEVEL=<LEVEL>],[EXPTRC=<EXPTRC>],[INCTRC=<INCTRC>], [TRCMODE=<TRCMODE>],[C2=<C2>]" ;
Deletes a cross-connection between STS or VT paths.
ED-CRS-<PATH>:[<TID>]:<SRC>,<DST>:<CTAG>::[<CCT>]:[ADD=<ADD>], [REMOVE=<REMOVE>],[CKTID=<CKTID>],[CMDMDE=<CMDMDE>]:[<PST>[,<SST>]]; Edits the state of an STS or VT cross-connection.
Adds the automatic optical node setup application attributes.
OPR-APC:[<TID>]::<CTAG>[::::];
Permits the APC application inside the NE to force regulation of the optical power to the entire DWDM ring.
OPR-LASER-OTS:[<TID>]:<AID>:<CTAG>;
Instructs a laser to be switched on.
OPR-PROTNSW-OCH:[<TID>]:<AID>:<CTAG>::<SW>;
Performs a protection switch on the trunk port of a TXPP_MR_2.5G card (protect version only).
OPR-PROTNSW-OTS:[<TID>]:<AID>:<CTAG>::<SW>;
Performs a protection switch on the trunk port of TXPP_MR_2.5G, MXPP_MR_2.5G, Optical Protection Unit, and OTU2-XP cards.
OPR-SLV-WDMANS:[<TID>]:<AID>:<CTAG>;
Invokes the calculation of the expected span loss verification.
OPR-WDMANS:[<TID>]::<CTAG>;
Operates the AONS application inside the NE to force a recalculation of the value to be assigned to all variable optical attenuators (VOA) representing the optical path inside the node.
Retrieves the configuration parameter of a DWDM client.
Output format:
SID DATE TIME M CTAG COMPLD "<AIDUNIONID>,<AIDTYPE>:,,[<ROLE>],[<STATUS>]:[NAME=<NAME>],[LBCL=<LBCL>], [OPT=<OPT>],[OPR=<OPR>],[FREQ=<FREQ>],[LOSSB=<LOSSB>]:<PSTPSTQ>,[<SST>]" ;
Retrieves Y-cable protection on client facilities.
Output format:
SID DATE TIME M CTAG COMPLD "<AIDUNIONID>,<AIDUNIONID1>::[PROTTYPE=<PROTTYPE>],[PROTID=<PROTID>], [RVRTV=<RVRTV>],[RVTM=<RVTM>],[PSDIRN=<PSDIRN>]" ;
RTRV-FFP-OCH:[<TID>]:<AID>:<CTAG>[::::];
Retrieves the protection group information for the TXP_MR_2.5G and TXPP_MR_2.5G trunk port.
Output format:
SID DATE TIME M CTAG COMPLD "<WORK>,<PROTECT>::[PROTTYPE=<PROTTYPE>],[PROTID=<PROTID>], [RVRTV=<RVRTV>],[RVTM=<RVTM>],[PSDIRN=<PSDIRN>],[VRGRDTM=<VRGRDTM>], [DTGRDTM=<DTGRDTM>],[RCGRDTM=<RCGRDTM>],[OPOTYPE=<OPOTYPE>]" ;
RTRV-FFP-OTS:[<TID>]:<AID>:<CTAG>[::::];
Retrieves the Y-cable or splitter protection group information for the OTU2-XP card.
Output format:
SID DATE TIME M CTAG COMPLD "<WORK>,<PROTECT>::[PROTTYPE=<PROTTYPE>],[PROTID=<PROTID>],[RVRTV=<RVRTV>],[RVTM=<RVTM>,[,PSDIRN=<PSDIRN>]"
SID DATE TIME M CTAG COMPLD "<AID>::REMOTEID=<REMOTEID>,LOCALPORT=<LOCALPORT>, REMOTEIP=<REMOTEIP>,[HELLO=<HELLO>],[HELLOMIN=<HELLOMIN>], [HELLOMAX=<HELLOMAX>],[DEAD=<DEAD>],[DEADMIN=<DEADMIN>], [DEADMAX=<DEADMAX>],[OPSTATE=<OPSTATE>]:[<PST>[,<SST>]] ;
RTRV-LMP-TLINK:[<TID>]:<SRC>:<CTAG>;
Retrieves an LMP TE link.
Output format:
SID DATE TIME M CTAG COMPLD "<SRC>::[REMOTEID=<REMOTEID>],[DWDM=<DWDM>],[REMOTETE=<REMOTETE>], [MUXCAP=<MUXCAP>],[OPSTATE=<OPSTATE>]:[<PST>[,<SST>]]" ;
RTRV-LMP-DLINK:[<TID>]:<SRC>:<CTAG>;
Retrieves an LMP data link.
Output format:
SID DATE TIME M CTAG COMPLD "<AID>::[LINKTYPE=<LINKTYPE>],[REMOTEID=<REMOTEID>],[TELINK=<TELINK>], [OPSTATE=<OPSTATE>]" ;
RTRV-LNK:[<TID>]::<CTAG>;
Retrieves all the optical links created in the NE.
Output format:
SID DATE TIME M CTAG COMPLD "<FROM>,<TO>::[OLNKT=<OLNKT>],[CTYPE=<CTYPE>],[RDIRN=<RDIRN>], [BAND=<BAND>],[WLEN=<WLEN>]:<PST_PSTQ>,[<SST>]" ;
Retrieves any optical link associated with the entered AIDs or AID range.
Output format:
SID DATE TIME M CTAG COMPLD "<FROM>,<TO>::[OLNKT=<OPTICALLINKTYPE>],[CTYPE=<CREATIONTYPE>], [RDIRN=<RDIRN>],[BAND=<BAND>],[WLEN=<WLEN>]:<PST_PSTQ>,[<SST>]" ;
Retrieves all the MAC addresses stored in the card.
RTRV-NE-APC:[<TID>]:[<AID>]:<CTAG>;
Retrieves the APC application ports that are involved in node setup regulation.
Output format:
SID DATE TIME M CTAG COMPLD "<AID>,<MOD>::[MODIFDAT=<MODIFDAT>],[MODIFTM=<MODIFTM>], [CHECKDAT=<CHECKDAT>],[CHECKTM=<CHECKTM>]" ;
RTRV-NE-WDMANS:[<TID>]::<CTAG>;
Retrieves the optical node setup (WDMANS) application ports involved in node setup regulation.
Output format:
SID DATE TIME M CTAG COMPLD "[<AID>],<AIDTYPE>::[REGULATED=<REGULATED>],[PARAM=<PARAM>]" ;
RTRV-OCH:[<TID>]:<AID>:<CTAG>;
Retrieves the attributes (service parameters) and state of an OCH facility.
Output format:
SID DATE TIME M CTAG COMPLD "<AID>:[<ROLE>],[<STATUS>]:[<OPTICALPORTTYPE>],[<POWER>],[<EXPWLEN>], [<ACTWLEN>],[<ILOSS>],[<VOAMODE>],[<VOAATTN>],[<VOAPWR>],[<VOAREFATTN>], [<VOAREFPWR>],[<REFOPWR>],[<CALOPWR>],[<CHPOWER>],[<CHPOWERFLG>], [<ADDOPWR>],[<PORTNAME>],[<GCC>],[<GCCRATE>],[<DWRAP>],[<FEC>], [<PAYLOADMAP>],[<LBCLCURR>],[<OPTCURR>],[<OPRCURR>],[<OSFBER>],[<OSDBER>], [<SOAK>],[<SOAKLEFT>],[<LOSSB>],[<PEERID>],[<REGENNAME>],[<PORTMODE>], [<ODUTRANSMODE>],[<ERRORDECORRELATOR>],[<FCS>],[<PROACTPROTECTION>], [<TRIGGERTH>],[<REVERTTH>],[<TRIGWINDOW>],[<RVRTWINDOW>],[<OVRCLK>], [<MDLTFMT>],[<RXWLEN>]:<PST>,[<SST>]" ;
RTRV-OCHCC:[<TID>]:<AID>:<CTAG>;
Retrieves the OCH client connection provisioning information.
Output format:
SID DATE TIME M CTAG COMPLD "<AID>::[PAYLOAD=<PAYLOAD>],[CTKID=<CTKID>]:<PSTPSTQ>" ;
RTRV-OCHNC:[<TID>]:<AID>:<CTAG>[::::];
Retrieves the OCH wavelength connection provisioning information.
Output format:
SID DATE TIME M CTAG COMPLD "<SRC>,<DST>:<WCT>:[CKTID=<CKTID>]::<PSTPSTQ>" ;
RTRV-OMS:[<TID>]:<AID>:<CTAG>;
Retrieves the attributes (service parameters) and state of an OMS facility.
Output format:
SID DATE TIME M CTAG COMPLD "<AID>::RDIRN=<RDIRN>,OPTYPE=<OPTICALPORTTYPE>,[OPWR=<POWER>], EXPBAND=<EXPBAND>,[ACTBAND=<ACTBAND>],[ILOSS=<ILOSS>], [VOAMODE=<VOAMODE>],[VOAATTN=<VOAATTN>],[VOAPWR=<VOAPWR>], [VOAREFATTN=<VOAREFATTN>],[VOAREFPWR=<VOAREFPWR>], [REFOPWR=<REFOPWR>],[CALOPWR=<CALOPWR>],[CHPOWER=<CHPOWER>], [NAME=<NAME>]:<PST_PSTQ>,[<SSTQ>]" ;
RTRV-OPM:[<TID>]:[<AID>]:<CTAG>[::::];
Retrieves the optical power monitoring (OPM) parameters present at the OCH layer in a reconfigurable optical add/drop mode (ROADM) node.
Output format:
SID DATE TIME M CTAG COMPLD "<AID>::[POWEROUT=<POWEROUT>],[POWERADD=<POWERADD>], [POWERPT=<POWERPT>]" ;
RTRV-OSC:[<TID>]:<AID>:<CTAG>;
Retrieves all of the OSC information of the NE.
Output format:
SID DATE TIME M CTAG COMPLD "<AID>::[RINGID=<RINGID>],[NODEID=<NODEID>],[EAST=<EAST>],[WEST=<WEST>]" ;
RTRV-OTS:[<TID>]:<AID>:<CTAG>;
Retrieves the attributes (service parameters) and state of an OTS facility.
Output format:
SID DATE TIME M CTAG COMPLD "<AID>:,,[<ROLE>],[<STATUS>]:<OPTICALPORTTYPE>,[<POWER>],[<OSCPWR>],[<ILOSS>], [<VOAMODE>],[<VOAATTN>],[<VOAPWR>],[<VOAREFATTN>],[<VOAREFPWR>], [<OSRI>],[<AMPLMODE>],[<AMPLMODEFLG>],[<CHPOWER>],[<CHPOWERFLG>], [<GAIN>],[<EXPGAIN>],[<EXPGAINFLG>],[<REFOPWR>],[<OFFSET>],[<REFTILT>], [<REFTILTFLG>],[<CALTILT>],[<ASEOPWR>],[<DCULOSS>],[<AWGST>],[<HEATST>], [<NAME>],[<SOAK>],[<SOAKLEFT>],[<WRKCHANNELS>],[<RATIO>],[<RAMAN_STATUS>], [<RAMAN_QUALITY>],[<TIME>],[<DATE>],[<RAMAN_RESTORE_FC>],[<TIME_FC>], [<DATE_FC>],[<FG>],[<CG>]:<PST>,[<SST>]";
RTRV-PATH-OCH:[<TID>]:<AID>:<CTAG>;
Retrieves the OCH path inside a node.
Output format:
SID DATE TIME M CTAG COMPLD "<AID>:[WLEN],[PATH]:" ;
RTRV-PROTNSW-OCH:[<TID>]:<AID>:<CTAG>;
Retrieves the protection switch status of a TXPP_MR_2.5G card.
Output format:
SID DATE TIME M CTAG COMPLD "<AID>:<SW>,<SWTYPE>" ;
RTRV-PROTNSW-OTS:[<TID>]:<AID>:<CTAG>;
Retrieves the protection switch status of a TXPP_MR_2.5G card or OTU2-XP card in splitter mode.
Output format:
SID DATE TIME M CTAG COMPLD "<AID>:<SW>,<SWTYPE>"
;
RTRV-RAMAN:[<TID>]:<AID>:<CTAG>;
Retrieves the attributes of a Raman measure.
Output format:
SID DATE TIME M CTAG COMPLD "<AID>:<MEAS_INDEX>:<MINRAMANLEV>,<MAXRAMANLEV>,<DATE>,<TIME>" ;
RTRV-SLV-WDMANS:[<TID>]:<AID>:<CTAG>;
Retrieves the options provisionable by the ED-SLV-WDMANS command.
Output format:
SID DATE TIME M CTAG COMPLD "<AID>:[<ROLE>]:[<HIGHSLVEXP>],[<LOWSLVEXP>],[<SLVACT>],[<RESOLUTION>], [<TYPE>]:" ;
Retrieves the sent trace string, expected trace string, received trace string, trace mode, and the trace level for the SONET J0 Section, the TTI PATH, and the SECTION monitoring levels of the DWDM facility.
Output format:
SID DATE TIME M CTAG COMPLD "<CHANNEL>,<MOD>::[TRCLEVEL=<TRCLEVEL>],[EXPTRC=<EXPTRC>],[TRC=<TRC>], [INCTRC=<INCTRC>],[TRCMODE=<TRCMODE>],[TRCFORMAT=<TRCFORMAT>]" ;
RTRV-WDMANS:[<TID>]:<AID>:<CTAG>;
Retrieves the AONS application attributes.
Output format:
SID DATE TIME "<AID>:[<WLEN>]:[<VOAATTN>],[<VOAATTNFLG>],[<POWEROSC>],[<POWEROSCFLG>], [<NTWTYPE>],[<NTWTYPEFLG>],[<CHLOSS>],[<CHLOSSFLG>],[<GAIN>],[<GAINFLG>], [<TILT>],[<TILTFLG>],[<CHPWR>],[<CHPWRFLG>],[<AMPLMODE>],[<AMPLMODEFLG>], [<RATIO>],[<RATIOFLG>],[<OSCLOSS>],[<OSCLOSSFLG>],[<OPTICALNODETYPE>], [<DITHER>],[<DITHERFLG>],[<TOTALPWR>],[<TOTALPWRFLG>],[<HIGHSLVEXP>], [<HIGHSLVEXPFLG>],[<LOWSLVEXP>],[<LOWSLVEXPFLG>],[<LASTRUNDAT>]: [<LASTRUNTM>]" ;
RTRV-WDMSIDE:[<TID>]:<AID>:<CTAG>[::::];
Retrieves the WDM side and defines its attributes.
Output format:
SID DATE TIME M CTAG COMPLD "<AID>::LINEIN=<LINEIN>,LINEOUT=<LINEOUT>,[OCS=<OSC>][:]" ;
RTRV-WLEN:[<TID>]:<AID>:<CTAG>;
Retrieves the wavelength provisioning information.
Output format:
SID DATE TIME M CTAG COMPLD "<AID>:<CCT>:[SIZE=<SIZE>],[CKTID=<CKTID>],[TOSIDE=<TOSIDE>],[SRC=<SRC>], [DST=<DST>]:<PST_PSTQ>,[<SSTQ>]" ;
Edits the attributes for a specific slot in the NE. Modifies a shelf role from node control (NC) to shelf control (SC) on an NE configured in multishelf mode.
SID DATE TIME M CTAG COMPLD "<AID>,[<AIDTYPE>]:[<NTFCNCDE>],<TYPEREP>,[<SRVEFF>],[<OCRDAT>], [<OCRTM>],,,[<DESC>]" ;
RTRV-EQPT:[<TID>]:<AID>:<CTAG>[::::];
Retrieves the data parameters and state parameters associated with an equipment unit. Also retrieves shelf parameters.
Output format:
SID DATE TIME M CTAG COMPLD "<AID>:<AIDTYPE>,<EQUIP>,[<ROLE>],[<STATUS>]:[<PROTID>],[<PRTYPE>],[<RVRTV>], [<RVTM>],[<CARDNAME>],[<IOSCFG>],[<CARDMODE>],[<PEERID>],[<REGENNAME>], [<PEERNAME>],[<TRANSMODE>],[<RETIME>],[<SHELFROLE>],[<FRPROLE>], [<FRPSTATE>],[<FRPHOLDOFFTIME>],[<ADMINCVLAN>],[<ADMINSVLAN>], [<CFMSTATE>],[<CCTIMER>],[<SWITCHWITHCRCALARM>],[<CRCTHR>], [<CRCPOLLINTRVL>],[<CRCSOAKCOUNT>]:<PST>,[<SST>]" ;
Retrieves an Ethernet connection between two or more Ethernet connection endpoints within the Ethernet facilities.
Output format:
SID DATE TIME M CTAG COMPLD "<SRC>,<DST>:<ECT>:[CKTID=<CKTID>]:<PSTPSTQ>,[<SSTQ>]" ;
RTRV-ETH:[<TID>]:<AID>:<CTAG>[:::];
Retrieves the front-end port information of an Ethernet card.
Output format:
SID DATE TIME M CTAG COMPLD "<AID>::[LINKSTATE=<LINKSTATE>],[MTU=<MTU>],[FLOWCTRL=<FLOWCTRL>], [DUPLEX=<DUPLEX>],[SPEED=<SPEED>],[FLOW=<FLOW>],[EXPDUPLEX=<EXPDUPLEX>], [EXPSPEED=<EXPSPEED>],[VLANCOS=<VLANCOS>],[IPTOS=<IPTOS>], [OPTICS=<OPTICS>],[NAME=<NAME>],[SUPPRESS=<suppress>],[SOAK=<SOAK>], [SOAKLEFT=<SOAKLEFT>],[SELECTIVEAUTO=<SELECTIVEAUTO>],[LITIMER=<LITIMER>]:<PST_PSTQ>,[<SSTQ>]" ;
RTRV-L2-ETH:[<TID>]:<AID>:<CTAG>[:::];
Retrieves the Layer 2 port information of the Ethernet card.
Output format:
SID DATE TIME M CTAG COMPLD "<AID>::[<NIMODE>],[<MACLEARNING>],[<INGRESSCOS>],[<ETHERCETYPE>], [<ETHERSTYPE>],[<ALWMACADDR>],[<INHMACADDR>],[<BPDU>],[<BRIDGESTATE>], [<ACTBRIDGESTATE>],[<QNQMODE>],[<TRNSPSVLAN>],[<NAME>],[<IGMPROUTER>], [<AISACTION>],[<PROTACTION>],[CLRCRCALM>]:"
;
RTRV-MCAST:[<TID>]:<AID>:<CTAG>::[::];
Retrieves the multicast VLAN registration attributes.
Output format:
SID DATE TIME M CTAG COMPLD "<AID>::[<MVRSTATE>],[<MVRSVLAN>],[<MVRSTARTIP>],[<MVRIPRANGE>], [<IGMPONCVLAN>]:" ;
Downloads a new software package from the location specified by the FTP URL. Performs backup/restore on the database and archives the auditlog.
REPT EVT FXFR
Reports the FTP software download status of the start, completion, and completed percentage.
Output format:
SID DATE TIME A ATAG REPT EVT FXFR "<FILENAME>,<FXFR_STATUS>,[<FXFR_RSLT>],[<PRCNT_XFRD>]" ;
REPT EVT IOSCFG
Reports the status of copying the IOS configuration file when the COPY-IOSCFG command is issued.
Output format:
SID DATE TIME A ATAG REPT EVT IOSCFG "<AID>:<SRC>,<DEST>,<STATUS>,[<RESULT>]" ;
Log
Table 12 Log
ALW-MSG-DBCHG:[<TID>]::<CTAG>[::,,];
Enables REPT DBCHG.
INH-MSG-DBCHG:[<TID>]::<CTAG>[::,,];
Disables REPT DBCHG.
REPT DBCHG
Reports any changes on the NE that result from certain TL1 commands or an external event.
Output format:
SID DATE TIME A ATAG REPT DBCHG "TIME=<TIME>,DATE=<DATE>,[SOURCE=<SOURCE>],[USERID=<USERID>], DBCHGSEQ=<DBCHGSEQ>:<COMMAND>:<AID>:::<PSTPSTQ>,<SST>" ;
RTRV-AUDIT-LOG:[<TID>]::<CTAG>;
Retrieves the contents of the audit log stored in the NE.
Output format:
SID DATE TIME M CTAG COMPLD "<ENTRYNUM>,<OCRDAT>,<OCRTM>,<TASKID>,<TXSTATUS>,<DESCRIPTION>"
;
RTRV-LOG:[<TID>]::<CTAG>::<LOGNM>;
Retrieves the alarm log of the NE.
Output format:
SID DATE TIME M CTAG COMPLD "<AID>,<ALMNUMBER>:CURRENT=<CURRENT>,[PREVIOUS=<PREVIOUS>], <CONDITION>,<SRVEFF>,[TIME=<OCRTIME>],[DATE=<OCRDAT>]:<ALMDESCR>" ;
Network
Table 13 Network
RTRV-MAP-NETWORK:[<TID>]::<CTAG>;
Retrieves all the NE attributes which are reachable from the gateway network element (GNE).
Output format:
SID DATE TIME M CTAG COMPLD "<IPADDR>,<NODENAME>,<PRODUCT>" ;
RTRV-NE-IPMAP:[<TID>]:[<AID>]:<CTAG>;
Retrieves the IP address and node name of the NEs that have the data communication channel (DCC) connection with this NE.
Output format:
SID DATE TIME M CTAG COMPLD "<AID>:<IPADDR>,<NODENAME>" ;
Retrieves the attributes associated with an STS or VT path.
Output format:
SID DATE TIME M CTAG COMPLD "<AID>::[LEVEL=<LEVEL>],[SFBER=<SFBER>],[SDBER=<SDBER>],[RVRTV=<RVRTV>], [RVTM=<RVTM>],[SWPDIP=<SWPDIP>],[HOLDOFFTIMER=<HOLDOFFTIMER>], [EXPTRC=<EXPTRC>],[TRC=<TRC>],[INCTRC=<INCTRC>],[TRCMODE=<TRCMODE>], [TRCFORMAT =<TRCFORMAT>],[TACC=<TACC>],[TAPTYPE=<TAPTYPE>], [UPSRPTHSTATE=<UPSRPTHSTATE>],[C2=<C>], [BLSRPTHSTATE=<BLSRPTHSTATE>]:<PSTPSTQ>,[<SSTQ>]" ;
RTRV-STS:[<TID>]:<AID>:<CTAG>;
Retrieves the attributes associated with an STS path based on the granularity level of NE-specific STSs.
Output format:
SID DATE TIME M CTAG COMPLD "<AID>::[LEVEL=<LEVEL>],[SFBER=<SFBER>],[SDBER=<SDBER>],[RVRTV=<RVRTV>], [RVTM=<RVTM>],[SWPDIP=<SWPDIP>],[HOLDOFFTIMER=<HOLDOFFTIMER>], [EXPTRC=<EXPTRC>],[TRC=<TRC>],[INCTRC=<INCTRC>],[TRCMODE=<TRCMODE>], [TACC=<TACC>],[TAPTYPE=<TAPTYPE>],[UPSRPTHSTATE=<UPSRPTHSTATE>], [C2=<C>],[BLSRPTHSTATE=<BLSRPTHSTATE>]:<PST_PSTQ>,[<SSTQ>]" ;
Performance
Table 15 Performance
ALW-PMREPT-ALL:[<TID>]::<CTAG>;
Resumes the processing of all inhibited performance monitoring (PM) reports.
Schedules/reschedules the NE to report the performance monitoring data for a line facility or for an STS/VT path periodically, using an automatic REPT PM message.
Deletes the IEEE 802.1Q tunneling (QinQ) relationship between the CE-VLAN and the S-VLAN for Gigabit Ethernet uniport provisioning associated to an L2 Ethernet port.
Provisions the payload (or signal) type of facility.
ED-EFM:[<TID>]:<AID>:<CTAG>:::[EFMSTATE=<EFMSTATE>],[EFMMODE=<EFMMODE>], [MAXPDUS=<MAXPDUS>],[MAXIDLINTRVL=<MAXIDLINTRVL>], [RMTTMOUT=<RMTTMOUT>],[LNKMNTR=<LNKMNTR>],[OPRLNKMNTR= <OPRLNKMNTR>],[EF=<EF>],[EFTH=<EFTHRSLD>],[EFP=<EFP>],[EFPTH=<EFPTH>], [EFS=<EFS>],[EFSTH=<EFSTH>]; Edits the ethernet OAM parameters on the front end port of the fast (10/100 Mbps) ethernet card.
Modifies the IEEE 802.1Q tunneling (QinQ) relationship between the customer CE-VLAN and the S-VLAN for Gigabit Ethernet uniport provisioning associated to an L2 Ethernet port.
Enters a new IEEE 802.1Q tunneling (QinQ) relationship between the CE-VLAN and S-VLAN for Gigabit Ethernet uniport provisioning associated to an L2 Ethernet port.
Retrieves the attributes related with the fibre channel (FC) port (ONS 15454, ONS 15454 M2, and ONS 15454 M6).
Output format:
SID DATE TIME M CTAG COMPLD "<AID>:,,[<ROLE>],[<STATUS>]:LINKRATE=<LINKRATE>,LINKSTATE=<LINKSTATE>, [LINKRCVRY=<LINKRCVRY>],[DISTEXTN=<DISTEXTN>], [LINKCREDITS=<LINKCREDITS>],[MFS=<MFS>],[ENCAP=<ENCAP>],[NAME=<NAME>], [SOAK=<SOAK>],[SOAKLEFT=<SOAKLEFT>],[FREQ=<FREQ>],[LOSSB=<LOSSB>]: <PST_PSTQ>,[<SST>]"
;
RTRV-<MOD1FICONPAYLOAD>:[<TID>]:<AID>:<CTAG>;
Retrieves the fibre-channel-specific settings for ports which have been configured to carry FICON traffic (ONS 15454, ONS 15454 M2, and ONS 15454 M6).
Output format:
SID DATE TIME M CTAG COMPLD "<AID>:,,[<ROLE>],[<STATUS>]:[LINKRATE=<LINKRATE>],[LINKSTATE=<LINKSTATE>], [LINKRCVRY=<LINKRCVRY>],[DISTEXTN=<DISTEXTN>], [LINKCREDITS=<LINKCREDITS>],[MFS=<MFS>],[ENCAP=<ENCAP>],[NAME=<NAME>], [SOAK=<SOAK>],[SOAKLEFT=<SOAKLEFT>],[FREQ=<FREQ>],[LOSSB=<LOSSB>]: <PST_PSTQ>,<SST>" ;
RTRV-<OCN_TYPE>:[<TID>]:<AID>:<CTAG>[::::];
Retrieves the attributes and state of an OC-N facility.
Output format:
SID DATE TIME M CTAG COMPLD "<AID>:,,[<ROLE>],[<STATUS>]:[DCC=<DCC>],[AREA=<AREA>],[TMGREF=<TMGREF>], [SYNCMSG=<SYNCMSG>],[SENDDUS=<SENDDUS>],[PJMON=<PJMON>], [SFBER=<SFBER>],[SDBER=<SDBER>],[MODE=<MODE>],[WVLEN=<WVLEN>], [RINGID=<RINGID>],[BLSRTYPE=<BLSRTYPE>],[MUX=<MUX>],[UNIC=<UNIC>], [CCID=<CCID>],[NBRIX=<NBRIX>],[SOAK=<SOAK>],[SOAKLEFT=<SOAKLEFT>], [SSMRCV=<SSMRCV>],[OSPF=<OSPF>],[LDCC=<LDCC>],[NAME=<NAME>], [LBCL=<LBCL>],[OPT=<OPT>],[OPR=<OPR>],[EXPTRC=<EXPTRC>],[TRC=<TRC>], [TRCMODE=<TRCMODE>],[TRCFORMAT=<TRCFORMAT>],[ADMSSM=<ADMSSM>], [SENDDUSFF=<SENDDUSFF>],[AISONLPBK=<AISONLPBK>],[FREQ=<FREQ>], [LOSSB=<LOSSB>],[FOREIGNFEND=<FOREIGNFEND>], [FOREIGNIPADDRESS=<FOREIGNIPADDRESS>],:<PSTPSTQ>,[<SSTQ>]" ;
RTRV-10GIGE:[<TID>]:<AID>:<CTAG>[::::];
Retrieves the 10 Gigabit per second specific parameters for the port (ONS 15454, ONS 15454 M2, and ONS 15454 M6).
Output format:
SID DATE TIME M CTAG COMPLD "<AID>:,,[<ROLE>],[<STATUS>]:[NAME=<NAME>],[MACADDR=<MACADDR>], [LBCL=<LBCL>],[OPT=<OPT>],[OPR=<OPR>],[FREQ=<FREQ>],[LOSSB=<LOSSB>]: <PSTPSTQ>,[<SST>]" ;
RTRV-ALS:[<TID>]:<AID>:<CTAG>[::::];
Retrieves the ALS attributes of an OC-N facility and all facilities that support the ALS feature.
Output format:
SID DATE TIME M CTAG COMPLD "<AID>,[<AIDTYPE>]:[<ALSMODE>],[<ALSRCINT>],[<ALSRCPW>],[<LSRSTAT>],[<OSRI>]"
;
RTRV-COS-ETH:[<TID>]:<AID>:<CTAG>[::::];
Retrieves the egress parameters of a CoS table associated to an L2 Ethernet port.
Output format:
SID DATE TIME M CTAG COMPLD "<AID>::[QOSENABLED=<QOSENABLED>],[BW0=<BWO>], [WEIGHT0=<WEIGHT0>],[BW1=<BW1>],[WEIGHT1=<WEIGHT1>],[BW2=<BW2>], [WEIGHT2=<WEIGHT2>],[BW3=<BW3>],[WEIGHT3=<WEIGHT3>],[BW4=<BW4>], [WEIGHT4=<WEIGHT4>],[BW5=<BW5>],[WEIGHT5=<WEIGHT5>],[BW6=<BW6>], [WEIGHT6=<WEIGHT6>],[BW7=<BW7>],[WEIGHT7=<WEIGHT7>][:]" ;
RTRV-DS1:[<TID>]:<DS1AID>:<CTAG>[::::];
Retrieves the test access attributes on a DS-1 layer of DS3XM card (ONS 15454, ONS 15454 M2, and ONS 15454 M6).
Output format:
SID DATE TIME M CTAG COMPLD "<DS1AID>::[TACC=<TACC>],[TAPTYPE=<TAPTYPE>],[AISONLPBK=<AISONLPBK>], [MODE=<MODE>],[FMT=<FMT>],[BERTMODE=<BERTMODE>], [BERTPATTERN=<BERTPATTERN>],[BERTERRCOUNT=<BERTERRCOUNT>], [BERTERRRATE=<BERTERRRATE>], [BERTSYNCSTATUS=<BERTSYNCSTATUS>]"
;
RTRV-EC1:[<TID>]:<AID>:<CTAG>[::::];
Retrieves the facility status of an EC-1 port (ONS 15454, ONS 15454 M2, and ONS 15454 M6).
Output format:
SID DATE TIME M CTAG COMPLD "<AID>::[PJMON=<PJMON>],[LBO=<LBO>],[RXEQUAL=<RXEQUAL>],[SOAK=<SOAK>], [SOAKLEFT=<SOAKLEFT>],[SFBER=<SFBER>],[SDBER=<SDBER>],[NAME=<NAME>], [EXPTRC=<EXPTRC>],[TRC=<TRC>],[TRCMODE=<TRCMODE>], [TRCFORMAT=<TRCFORMAT>],[AISONLPBK=<AISONLPBK>]:<PSTPSTQ>,[<SSTQ>]" ;
RTRV-ESCON:[<TID>]:<AID>:<CTAG>;
Retrieves fibre-channel-specific settings for ports that have been configured to carry ESCON traffic (ONS 15454, ONS 15454 M2, and ONS 15454 M6).
Output format:
SID DATE TIME M CTAG COMPLD "<AID>:,,[<ROLE>],[<STATUS>]:[ENCAP=<ENCAP>]" ;
RTRV-FAC:[<TID>]:<SRC>:<CTAG>[::::];
Retrieves the payload type of the facility. Only applicable to a facility with a provisionable type.
Output format:
SID DATE TIME M CTAG COMPLD "<SRC>::PAYLOAD=<PAYLOAD>:<PST_PSTQ>,[<SSTQ>]" ;
RTRV-FSTE:[<TID>]:<AID>:<CTAG>;
Retrieves the front end port information of Fast Ethernet (10/100 Mbps) cards (ONS 15454, ONS 15454 M2, and ONS 15454 M6).
Output format:
SID DATE TIME M CTAG COMPLD "<AID>:[<ROLE>],[<STATUS>]:[<ADMINSTATE>],[<LINKSTATE>],[<MTU>], [<FLOWCTRL>],[<OPTICS>],[<DUPLEX>],[<SPEED>],[<FLOW>],[<EXPDUPLEX>], [<EXPSPEED>],[<VLANCOSTHRESHOLD>],[<IPTOSTHRESHOLD>],[<NAME>], [<SUPPRESS>],[<SOAK>],[<SOAKLEFT>],[<SELECTIVEAUTO>],[<LIENABLE>], [<LITIMER>],[<LBCL>],[<OPT>],[<OPR>],[<FREQ>],[<LOSSB>],[<ACTFLOW>], [<ACTDUPLEX>],[<ACTSPEED>],[<CIR>],[<CBS>],[<EBS>],[<OSC>]:<PST>,[<SST>]" ;
RTRV-G1000:[<TID>]:<AID>:<CTAG>;
Retrieves the G1000-4 facility configuration (ONS 15454, ONS 15454 M2, and ONS 15454 M6).
Output format:
SID DATE TIME M CTAG COMPLD "<AID>::[MFS=<MFS>],[FLOW=<FLOW>],[LAN=<LAN>],[OPTICS=<OPTICS>], [TRANS=<TRANS>],[TPORT=<TPORT>],[LOWMRK=<LOWMRK>], [HIWMRK=<HIWMRK>],[AUTONEG=<AUTONEG>],[ENCAP=<ENCAP>], [NAME=<NAME>],[SOAK=<SOAK>],[SOAKLEFT=<SOAKLEFT>]:<PST_PSTQ>,[<SSTQ>]" ;
RTRV-GFP:[<TID>]:<SRC>:<CTAG>;
Retrieves the GFP port information on the ONS 15454 CE-100T-8, FC_MR-4, CE-MR-10, and CE-1000-4 cards.
Output format:
SID DATE TIME M CTAG COMPLD "<AID>::[FCS=<FCS>],[AUTOTHGFPBUF=<AUTOTHGFPBUF>],[GFPBUF=<GFPBUF>], [FILTER=<FILTER>]" ;
RTRV-GIGE:[<TID>]:<AID>:<CTAG>;
Retrieves the front-end port information for the ONS 15454 ML1000-2 and CE-1000-4 cards.
Output format:
SID DATE TIME M CTAG COMPLD "<AID>:[<ROLE>],[<STATUS>]:[<ADMINSTATE>],[<LINKSTATE>],[<MTU>],[<MFS>], [<FLOW>],[<FLOWCTRL>],[<AUTONEG>],[<HIWMRK>],[<LOWMRK>],[<OPTICS>], [<DUPLEX>],[<SPEED>],[<NAME>],[<MACADDR>],[<LBCL>],[<OPT>],[<OPR>],[<FREQ>], [<LOSSB>],[<SUPPRESS>],[<SOAK>],[<SOAKLEFT>],[<SQUELCH>],[<CIR>],[<CBS>],[<EBS>], [<LIENABLE>],[<LITIMER>],[<ACTFLOW>],[<ACTDUPLEX>],[<ACTSPEED>],[<OSC>], [<ENCAP>],[<PAUSEFRAME>],[<CLNTDST>]:<PST>,[<SST>]" ;
RTRV-L2-ETH:[<TID>]:<AID>:<CTAG>[:::];
Retrieves the Layer 2 port information of the Ethernet card.
Output format:
SID DATE TIME M CTAG COMPLD "<AID>::[<NIMODE>],[<MACLEARNING>],[<INGRESSCOS>],[<ETHERCETYPE>], [<ETHERSTYPE>],[<ALWMACADDR>],[<INHMACADDR>],[<BPDU>],[<BRIDGESTATE>], [<ACTBRIDGESTATE>],[<QNQMODE>],[<TRNSPSVLAN>],[<NAME>],[<IGMPROUTER>], [<AISACTION>],[<PROTACTION>],[<IGMPCVLAN>],[<DLF>],[<DLFTHRES>],[<MCAST>], [<MCASTTHRES>],[<BCAST>],[<BCASTTHRES>]:"
Retrieves the NNI selective S-VLAN-ID table associated to an L2 Ethernet port.
Output format:
SID DATE TIME M CTAG COMPLD "<AID>:<S_VLAN_ID>[::]" ;
RTRV-POS:[<TID>]:<AID>:<CTAG>;
Retrieves the back-end port information for the ML-Series Ethernet cards when the back-end port is working in POS mode.
Output format:
SID DATE TIME M CTAG COMPLD "<AID>::[ADMINSTATE=<ADMINSTATE>],[LINKSTATE=<LINKSTATE>],[MTU=<MTU>], [ENCAP=<ENCAP>],[NAME=<NAME>],[SOAK=<SOAK>],[SOAKLEFT=<SOAKLEFT>]: <PST_PSTQ>,[<SST>]" ;
Retrieves the IEEE 802.1Q tunneling (QinQ) relationship between the CE-VLAN and the S-VLAN for Gigabit Ethernet uniport provisioning associated to an L2 Ethernet port.
Output format:
SID DATE TIME M CTAG COMPLD "<AID>:<FIRSTCEVLANID>,<LASTCEVLANID>,<SVLANID>:RULE=<RULE>[:]" ;
RTRV-T1:[<TID>]:<AID>:<CTAG>[::::];
Retrieves the DS-1 facilities configuration.
Output format:
SID DATE TIME M CTAG COMPLD "<AID>::[LINECDE=<LINECDE>],[FMT=<FMT>],[LBO=<LBO>],[TACC=<TAP>], [TAPTYPE=<TAPTYPE>],[SOAK=<SOAK>],[SOAKLEFT=<SOAKLEFT>],[SFBER=<SFBER>], [SDBER=<SDBER>],[NAME=<NAME>],[SYNCMSG=<SYNCMSG>], [SENDDUS=<SENDDUS>],[RETIME=<RETIME>],[AISONLPBK=<AISONLPBK>], [AISVONAIS=<AISVONAIS>],[AISONLOF=<AISONLOF>],[MODE=<MODE>], [SYNCMAP=<SYNCMAP>],[ADMSSM=<ADMSSM>],[PROVIDESYNC=<PROVIDESYNC>], [VTMAP=<VTMAP>],[INHFELPBK=<INHFELPBK>],[BERTMODE=<BERTMODE>], [BERTPATTERN=<BERTPATTERN>],[BERTERRCOUNT=<BERTERRCOUNT>], [BERTERRRATE=<BERTERRRATE>],[BERTSYNCSTATUS=<BERTSYNCSTATUS>]: <PST>,[<SST>]" ;
RTRV-T3:[<TID>]:<AID>:<CTAG>[::::];
Retrieves the facilities properties of a DS3, DS3I, or DS3 transmux card.
Output format:
SID DATE TIME M CTAG COMPLD "<AID>::[FMT=<FMT>],[LINECDE=<LINECDE>],[LBO=<LBO>], [INHFELPBK=<INHFELPBK>],[TACC=<TAP>],[TAPTYPE=<TAPTYPE>], [SOAK=<SOAK>],[SOAKLEFT=<SOAKLEFT>],[SFBER=<SFBER>],[SDBER=<SDBER>], [NAME=<NAME>],[AISONLPBK=<AISONLPBK>][BERTMODE=<BERTMODE>], [BERTPATTERN=<BERTPATTERN>],[BERTERRCOUNT=<BERTERRCOUNT>], [BERTERRRATE=<BERTERRRATE>],[BERTSYNCSTATUS=<BERTSYNCSTATUS>]: <PST>,[<SST>]" ;
RTRV-VLAN:[<TID>]:<AID>:<CTAG>[::::];
Retrieves a virtual LAN entry from the VLAN database.
Output format:
SID DATE TIME M CTAG COMPLD "<AID>::[NAME=<NAME>],[PROTN=<PROTN>]:" ;
Instructs a SONET NE to release (clear) a SONET line protection switch request.
RTRV-FFP:[<TID>]:<AID>:<CTAG>[::::];
Retrieves all optical 1+1 protection groups.
Output format:
SID DATE TIME M CTAG COMPLD "<WORK>,<PROTECT>:<LEVEL>:[PROTID=<PROTID>],[RVRTV=<RVRTV>], [RVTM=<RVTM>],[PSDIRN=<PSDIRN>],[VRGRDTM=<VRGRDTM>], [DTGRDTM=<DTGRDTM>],[RCGRDTM=<RCGRDTM>],[OPOTYPE=<OPOTYPE>]" ;
RTRV-FFP-<OCN_TYPE>:[<TID>]:<AID>:<CTAG>[::::];
Retrieves the optical facility protection information.
Output format:
SID DATE TIME M CTAG COMPLD "<WORK>,<PROTECT>::[PROTTYPE=<PROTTYPE>],[PROTID=<PROTID>], [RVRTV=<RVRTV>],[RVTM=<RVTM>],[PSDIRN=<PSDIRN>],[VRGRDTM=<VRGRDTM>], [DTGRDTM=<DTGRDTM>],[RCGRDTM=<RCGRDTM>],[OPOTYPE=<OPOTYPE>]" ;
Adds a user account; this command can only be performed by a Superuser.
INH-CONSOLE-PORT:[<TID>]:<AID>:<CTAG>;
Turns off the console port for the ML-Series cards.
INH-MSG-SECU:[<TID>]::<CTAG>[::,,];
Inhibits the REPT EVT SECU and REPT ALM SECU messages.
INH-USER-SECU:[<TID>]::<CTAG>::<UID>;
Disables (without deleting) a user ID, so the user is denied access to the NE.
REPT ALM SECU
Reports the occurrence of an alarmed security event against the NE.
Output format:
SID DATE TIME ** ATAG REPT ALM SECU "<AID>:<NOTIFCODE>,<SECUALMTYPE>" ;
REPT EVT SECU
Reports the occurrence of a non-alarmed security event against the NE.
Output format:
SID DATE TIME A ATAG REPT EVT SECU "<AID>:<DNFIELD>,[<CONDEFF>],,,,,,,:<SECURITY>:<DNFIELD1>" ;
REPT EVT SESSION
Reports a non-alarmed event related to establishing a session with the NE.
Output format:
SID DATE TIME A ATAG REPT EVT SESSION "<AID>:<EXP>,<PCN>" "<WARN>" ;
RTRV-CMD-SECU:[<TID>]:<AID>:<CTAG>;
Retrieves the current command security level of the command specified in the AID field.
Output format:
SID DATE TIME M CTAG COMPLD "<AID>:<CAP>" ;
RTRV-CONSOLE-PORT:[<TID>]:<AID>:<CTAG>;
Retrieves the status of the console port for the ML-Series cards.
Output format:
SID DATE TIME M CTAG COMPLD "<EQPT>:PORT=<PORT>" ;
RTRV-DFLT-SECU:[<TID>]:<AID>:<CTAG>; Retrieves the system-wide default values associated with several security parameters. Output format:
SID DATE TIME M CTAG COMPLD "<NE>:PAGE=<PAGE>,PCND=<PCND>,MXINV=<MXINV>,DURAL=<DURAL>, TMOUT=<TMOUT>,UOUT=<UOUT>,PFRCD=<PFRCD>,POLD=<POLD>,PINT=<PINT>, LOGIN=<LOGIN>,[PRIVLVL=<PRIVLVL>],[PDIF=<PDIF>]" ;
RTRV-USER-SECU:[<TID>]:<UID>:<CTAG>;
Retrieves the security information for a specified user or list of users.
Output format:
SID DATE TIME M CTAG COMPLD "<UID>:,<PRIVILEGE>:LOGGEDIN=<LOGGEDIN>,[NUMSESSIONS=<NUMSESS>], [LOCKEDOUT=<LOCKEDOUT>],[DISABLED=<DISABLED>]" ;
Retrieves and sends the current status of alarm conditions associated with a synchronization facility.
Output format:
SID DATE TIME M CTAG COMPLD "<AID>,[<AIDTYPE>]:<NTFCNCDE>,<CONDTYPE>,<SRVEFF>,[<OCRDAT>], [<OCRTM>],,:[<DESC>]" ;
RTRV-BITS:[<TID>]:<AID>:<CTAG>[::::];
Retrieves the BITS configuration command.
Output format:
SID DATE TIME M CTAG COMPLD "<AID>::[LINECDE=<LINECDE>],[FMT=<FMT>],[LBO=<LBO>],[SYNCMSG=<SYNCMSG>], [AISTHRSHLD=<AISTHRSHLD>],[SABIT=<SABIT>],[IMPEDANCE=<IMPEDANCE>], [BITSFAC=<BITSFAC>],[ADMSSM=<ADMSSM>]:[<PST>]" ;
Initializes the specified card and its associated subsystems.
RTRV-ALMTYPE:[<TID>]::<CTAG>;
Retrieves all system and user-defined alarm types.
Output format:
SID DATE TIME M CTAG COMPLD "<TYPEOFALM>,<ALMTYPE>" ;
RTRV-HDR:[<TID>]::<CTAG>;
Retrieves the header of a TL1 response message.
RTRV-INV:[<TID>]:<AID>:<CTAG>[::::];
Retrieves a listing of the equipment inventory.
Output format:
SID DATE TIME M CTAG COMPLD "<AID>,<AIDTYPE>::[PN=<PN>],[HWREV=<HWREV>],[FWREV=<FWREV>],[SN=<SN>], [CLEI=<CLEI>],[TWL1=<TWL>],[PLUGINVENDORID=<PLUGINVENDORID>], [PLUGINPN=<PLUGINPN>],[PLUGINHWREV=<PLUGINHWREV>], [PLUGINFWREV=<PLUGINFWREV>],[PLUGINSN=<PLUGINSN>], [ILOSSREF=<ILOSSREF>],[PID=<PID>],[VID=<VID>],[FPGA=<FPGA>], [VENDORID=<VENDORID>]"
;
RTRV-NE-APC:[<TID>]:[<AID>]:<CTAG>;
Output format:
SID DATE TIME M CTAG COMPLD "<AID>,<MOD>::[MODIFDAT=<MODIFDAT>],[MODIFTM=<MODIFTM>],[CHECKDAT=<CHECKDAT>],[CHECKTM=<CHECKTM>]"
;
RTRV-NE-GEN:[<TID>]::<CTAG>;
Retrieves the general NE attributes.
Output format:
SID DATE TIME M CTAG COMPLD "[IPADDR=<IPADDR>],[IPMASK=<IPMASK>],[DEFRTR=<DEFRTR>],[IPV6ADDR=<ipv6addr>] ,[IPV6PREFLEN=<ipv6preflen>],[IPV6DEFRTR=<ipv6defrtr>],[IPV6ENABLE=<ipv6enable>], [IIOPPORT=<IIOPPORT>],[NTP=<NTP>],[NAME=<NAME>],[SWVER=<SWVER>], [LOAD=<LOAD>],[PROTSWVER=<PROTSWVER>],[PROTLOAD=<PROTLOAD>], [DEFDESC=<DEFDESC>],[PLATFORM=<PLATFORM>],[SECUMODE=<SECUMODE>], [SUPPRESSIP=<SUPPRESSIP>],[MODE=<MODE>],[MSPUBVLANID=<MSPUBVLANID>], [MSINTLVLANID=<MSINTLVLANID>],[AUTOPM=<AUTOPM>], [SERIALPORTECHO=<SERIALPORTECHO>],[OSIROUTINGMODE=<OSIROUTINGMODE>], [OSIL1BUFSIZE=<OSIL1BUFSIZE>],[OSIL2BUFSIZE=<OSIL2BUFSIZE>], [NET=<NET>] >],[BKUPNTP=<BKUPNTP>];
RTRV-NE-IMGSIGN:[<TID>]:<AID>:<CTAG>[::::];
Retrieves the signature details of a given shelf.
Output format:
SID DATE TIME M CTAG COMPLD "[<AID>],[PKGTYPE=<PKGTYPE>],[IMGTYPE=<IMGTYPE>],[CMNNAME=<CMNNAME>, [ORGUNIT=<ORGUNIT>],[ORGNAME=<ORGNAME>],[CERTSN=<CERTSN>], [HASH=<HASH>],[SIGNALGO=<SIGNALALGO>],[KEYVER=<KEYVER>]" ;
RTRV-NE-PATH:[<TID>]::<CTAG>[::::];
Retrieves the general NE attributes.
Output format:
SID DATE TIME M CTAG COMPLD "[PDIP=<PDIP>],[XCMODE=<XCMODE>]" ;
RTRV-NETYPE:[<TID>]::<CTAG>;
Retrieves the equipment-related information of an NE.
Output format:
SID DATE TIME M CTAG COMPLD "<VENDOR>,<MODEL>,<NETYPE>,<SW_ISSUE>" ;
Retrieves all the attributes provisioned for a VCG.
Output format:
SID DATE TIME M CTAG COMPLD "<SRC>::TYPE=<TYPE>,TXCOUNT=<TXCOUNT>,CCT=<CCT>,[LCAS=<LCAS>], [BUFFERS=<BUFFERS>],[NAME=<NAME>]:<PST>" ;
RTRV-VCG:[<TID>]:<SRC>:<CTAG>[::::];
Retrieves all of the attributes provisioned for a VCG.
Output format:
SID DATE TIME M CTAG COMPLD "<SRC>::TYPE=<TYPE>,TXCOUNT=<TXCOUNT>,CCT=<CCT>,[LCAS=<LCAS>], [BUFFERS=<BUFFERS>],[NAME=<NAME>]:<PST>" ;
Obtaining Documentation and Submitting a Service Request
For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:
Subscribe to the What's New in Cisco Product Documentationas a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS version 2.0.
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R)
y Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental.
Feedback
The terms "Unidirectional Path Switched Ring" and "UPSR" may appear in Cisco literature. These terms do not refer to using Cisco ONS 15xxx products in a unidirectional path switched ring configuration. Rather, these terms, as well as "Path Protected Mesh Network" and "PPMN," refer generally to Cisco's path protection feature, which may be used in any topological network configuration. Cisco does not recommend using its path protection feature in any particular topological network configuration.
