Feedback
Table Of Contents
Configuring Settings on the Cisco Unified Wireless IP Phone 7925G
Accessing Network and Phone Settings
Configuring Network Profile Settings
Guidelines for Editing Settings in the Network Profile
Changing Network Configuration Settings
Configuring an Alternate TFTP Server
Changing the Cisco Discovery Protocol Settings
Configuring Wireless Settings for the Network Profile
Accessing the WLAN Configuration Menu
Changing WLAN Configuration Settings
Configuring the Security Certificate on the Phone
Changing the USB Configuration
Configuring Settings on the Cisco Unified Wireless IP Phone 7925G
This chapter describes the available configuration settings on the Cisco Unified Wireless IP Phone 7925G. It contains the following sections:
•
Accessing Network and Phone Settings
•
•
•
Accessing Network and Phone Settings
You can view and change many network configuration options and phone settings for the Cisco Unified Wireless IP Phone 7925G by using the Settings menu.
Note
To access the Settings menu, follow these steps:
Procedure
Step 1
on the Navigation button for
(Settings).
Step 2
•
•
•
•
•
•
Note
Step 3
•
•
Step 4
, you must press ** # on the keypad.
When the menu is unlocked,
displays.
Related Topics
•
•
•
Configuring Network Profile Settings
On the Cisco Unified Wireless IP Phone 7925G, you can configure four network profiles for a specific WLAN. Users who travel between company locations, can have separate network profiles for each WLAN location. You can set up profiles with the local SSID, WLAN settings, and authentication information for each location.
Note
These sections provide information about configuring network profiles:
•
•
Accessing a Network Profile
To view or configure the Network Profile menu on a Cisco Unified Wireless IP Phone 7925G, follow these steps.
Procedure
Step 1
Step 2
•
•
The Network Config list is locked
Step 3
Step 4
•
•
•
Step 5
Step 6
Step 7
appears by enabled profiles. You can enable from 1 to 4 profiles.
Changing the Profile Name
You can change the default name of the network profile to one that is more meaningful to the user, such as, "Headquarters" or "Branch office." You can change the name before or after you have made changes to the network profile.
To rename the profile, follow these steps.
Procedure
Step 1
Step 2
Step 3
Step 4
Step 5
See Guidelines for Editing Settings in the Network Profile.
Step 6
Guidelines for Editing Settings in the Network Profile
When you edit the Network Profile, you can enter characters, numbers, and special characters from the phone keypad. Use the numeric keys on the keypad to enter the number or the assigned characters. Each press moves to another character choice. Use the following guidelines when entering values:
•
•
•
•
to enter a space between characters.
•
to enter a dot between numbers.
•
–
to enter * - / = \ : ;
–
–
to enter # ? ( ) [ ] { }
–
to enter ! @ < > $ % ^ &
•
•
Related Topics
•
•
•
Changing Network Configuration Settings
After accessing a network profile, you can use Table 5-1 for descriptions and reference information for network profile settings.
Table 5-1 Network Configuration Settings
DHCP Server
IP address of the DHCP server from which the phone obtains its IP address
MAC Address
Unique MAC address of the phone
Display only, cannot configure
Host Name
Unique host name that the DHCP server assigned to the phone
Display only, cannot configure
DHCP Enabled
Yes—Allows the Dynamic Host Configuration Protocol (DHCP) to obtain an IP address for the phone
No—Disables the use of DHCP. You must configure the static settings for the phone
IP Address
Internet Protocol (IP) address of the phone
Subnet Mask
Subnet mask used by the phone
Default Router 1
Primary gateway used by the phone
Domain Name
Name of the Domain Name System (DNS) domain in which the phone resides
DNS Server 1
Primary DNS server used by the phone
DNS Server 2
Optional backup DNS server used by the phone
Alternate TFTP
Yes—This option assigns an alternative Trivial File Transfer Protocol (TFTP) server
No—This option uses the TFTP server assigned by DHCP
TFTP Server 1
IP address for the primary TFTP server used by the phone. If you set Alternate TFTP option to Yes, you must enter a non-zero value for this option
TFTP Server 2
Optional backup TFTP server the phone uses if the primary TFTP server is not available
Load Server
IP address for the server where the phone receives firmware updates
Cisco Unified Communications Manager Administration Guide.
CDP Enabled
Enables or disables Cisco Discovery Protocol (CDP) for the phone in Cisco Unified Communications Manager Administration
Changing the Cisco Discovery Protocol Settings
Cisco Unified Communications Manager Administration Guide.
Erase Configuration
Deletes the phone configuration and sets to factory defaults
Handset Only Mode
Yes—Indicates that the speakerphone is disabled on the phone
No—Indicates that the speakerphone is enabled on the phone
Specific Configuration Options for the Cisco Unified Wireless IP Phone 7925G, page 7-13
Configuring DHCP Settings
The Cisco Unified IP Phones enable DHCP, by default, to automatically assign IP addresses to devices when you connect them to the network. If you do not use DHCP in your network, then you must disable DHCP and manually enter the network configuration information. For more information, see "Interacting with the Dynamic Host Configuration Protocol Server" section on page 2-15.
Use these guidelines when manually configuring the IP settings:
•
•
Note
Disabling DHCP
To disable DHCP on the phone and manually configure IP settings, follow these steps:
Procedure
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Step 8
You must enter the other required static fields. See Table 5-2 for descriptions of these fields.
For information about entering values, see the "Guidelines for Editing Settings in the Network Profile" section.
Table 5-2 Static Settings When DHCP is Disabled
IP Address
IP address, the unique identifier assigned by the system administrator for the phone.
Subnet Mask
Used to partition the IP address into a network identifier and host identifier so TCP/IP can distinguish between them.
Default Router 1
Identifies the gateway that provides connectivity to the IP network beyond the subnet to which the phone belongs.
Domain Name
Identifies the Domain Name System (DNS) domain in which the phone resides.
DNS Server 1
DNS Server 2
If the system is configured to use host names for servers instead of IP addresses, identify the primary and secondary DNS server to resolve host names.
Alternate TFTP server
Identifies whether you are using an alternate TFTP server. See Configuring an Alternate TFTP Server.
TFTP Server 1
Identifies the TFTP server that the phone uses to obtain configuration files.
Configuring an Alternate TFTP Server
If you use DHCP to direct the Cisco Unified Wireless IP Phone 7925Gs to a TFTP server, you can also assign an alternative TFTP server to some phones instead of the one assigned by DHCP.To assign an alternate TFTP server to a phone, follow these steps:
Procedure
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
See Table 5-2 for descriptions of these fields.
For information about entering values, see the "Guidelines for Editing Settings in the Network Profile" section.
Step 8
Changing the Cisco Discovery Protocol Settings
Some network devices do not use Cisco Discovery Protocol (CDP).
To change whether the phone transmits CDP packets and settings associated with CDP, follow these steps in Cisco Unified Communications Manager Administration:
Procedure
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Erasing the Configuration
You can erase the network profile configuration and return to the default settings.
To erase the configuration, follow these steps:
Procedure
Step 1
Step 2
Step 3
Step 4
Step 5
Related Topics
•
Configuring Wireless Settings for the Network Profile
The WLAN Configuration menu contains settings that the phone uses to authenticate with an access point. These settings include the SSIDs, authentication type, and encryption data that the phone uses.
This section includes these topics for configuring wireless settings:
•
•
Accessing the WLAN Configuration Menu
To access the WLAN Configuration menu options on a Cisco Unified Wireless IP Phone 7925G, follow these steps:
Procedure
Step 1
Step 2
Step 3
Step 4
Step 5
For descriptions of the settings, see Table 5-3.
Step 6
Changing WLAN Configuration Settings
After accessing the WLAN settings, use Table 5-3 for descriptions and reference information for these settings.
Table 5-3 WLAN Configuration Settings
SSID
Unique identifier for accessing wireless access points
Security Mode
The type of authentication that the phone uses to access the WLAN. Options are:
•
•
•
•
•
•
•
•
UserName
User name for the wireless network (up to 32 characters)
Password
Password for the wireless network (up to 32 characters)
802.11 Mode
The wireless signal standard used in the WLAN. Options are:
•
•
•
•
•
Call Power Save Mode
The type of power saving mode used in the WLAN. Options are:
•
•
Networking Protocols Used with Cisco Unified Wireless IP Phones, page 2-9
Scan Mode
Auto—Scans when on a call or when the strength signal (RSSI) is low.
Continuous—Scans continuously even when it is not in a call.
Single AP—Never scans except when the basic service set (BSS) is lost.
Related Topics
•
•
•
Changing Phone Settings
The Phone Settings menu enables configuration of individual phones with ring tones or volume levels, display settings, keypad settings, and home page settings.
Note
To access the Phone Settings menu options on a Cisco Unified Wireless IP Phone 7925G, follow these steps:
Procedure
Step 1
Step 2
Step 3
Step 4
For descriptions of the settings, see Table 5-4. For specific instructions to change these settings, refer to "Using Phone Settings," in the Cisco Unified Wireless IP Phone7925G Guide.
Related Topics
•
•
•
Configuring the Security Certificate on the Phone
Security features establish and maintain authenticated communication streams between the phone and the Cisco Unified Communications Manager server, and digitally sign files before they are delivered.
A Locally Significant Certificate (LSC) installs on phones after you perform the necessary tasks that are associated with the Certificate Authority Proxy Function (CAPF). You can use Cisco Unified Communications Manager Administration to configure an LSC, as described in Cisco Unified Communications Manager Security Guide.
Alternatively, you can initiate the installation of an LSC from the Security Configuration menu on the phone. This menu also lets you update or remove an LSC.
Before you do so, ensure that the appropriate Cisco Unified Communications Manager and the CAPF security configurations are complete:
•
•
•
Refer to Cisco Unified Communications Manager Security Guide for more information. For more information about the security features, see the "Understanding Security Features for Cisco Unified IP Phones" section on page 1-8.
Depending on how you have configured the CAPF, this procedure installs an LSC, updates an existing LSC, or removes an existing LSC.
To configure an LSC on the phone, perform the following steps.
Procedure
Step 1
Step 2
Step 3
Step 4
The phone prompts for an authentication string.
Step 5
The phone begins to install, update, or remove the LSC, depending on how the CAPF was configured. During the procedure, a series of messages appears in the LSC option field in the Security Configuration menu so that you can monitor progress. When the procedure completes successfully, the phone will display Installed or Not Installed.
The LSC install, update, or removal process can take a long time to complete. You can stop the process at any time by pressing the Stop softkey from the Security Configuration menu. (Settings must be unlocked before you can press this softkey.)
When the phone successfully completes the installation procedure, it displays "Success." If the phone displays, "Failed," the authorization string may be incorrect or the phone may not enabled for upgrading. Refer to error messages generated by the CAPF and take appropriate actions.
You can verify that an LSC is installed on the phone by choosing SETTINGS > System Configuration > Security. LSC displays Installed.
Related Topic
•
Changing the USB Configuration
When using the USB cable to configure a phone, you might need to change the USB configuration. The phone has a default USB IP address of 192.168.1.100 that you can use with the USB connection to the PC. If you need to change the USB port configuration, these options are available:
•
•
To view or configure the USB port configuration on a Cisco Unified Wireless IP Phone 7925G, follow these steps:
Procedure
Step 1
Step 2
Step 3
Step 4
•
•
Note
Do not perform the following steps if DHCP is enabled.Step 5
Step 6
Step 7
Step 8
Step 9
Step 10
Step 11
Step 12
Related Topics
•
•
•
