Cisco Aironet Access Point Software Configuration Guide for VxWorks - Preface [Cisco Aironet 350 Series]

Table Of Contents

Preface

Audience and Scope

Organization

Conventions

Related Publications

Obtaining Documentation

Cisco.com

Documentation CD-ROM

Ordering Documentation

Documentation Feedback

Obtaining Technical Assistance

Cisco TAC Website

Opening a TAC Case

TAC Case Priority Definitions

Obtaining Additional Publications and Information

Preface

The Cisco Aironet Access Point Software Configuration Guide describes how to configure Cisco Aironet Access Points using the web-based management system. This manual also briefly describes how to use the console-based management system.

The preface contains the following information:

•Audience and Scope

•Organization

•Conventions

•Related Publications

•Obtaining Documentation, page xviii

•Obtaining Technical Assistance, page xix

•Obtaining Additional Publications and Information, page xxi

Audience and Scope

This guide is for the network manager responsible for configuring a wireless network. Before using the material in this guide, you should be familiar with some of the concepts and terminology of Ethernet and wireless local area networking.

The scope of this guide is to provide the information you need to change the configuration of an access point, use the access point management system to browse to other devices on a wireless network, and troubleshoot problems with the access point that might arise.

Organization

This guide is organized into the following chapters:

"Overview," is a functional overview of the access point management system. It describes the features of the management system and the access point's role in a wireless network.

"Using the Management Interfaces," describes how to use the web-based and console-based management interfaces.

"Configuring the Radio and Basic Settings," describes the how to use the web-based management system to configure the access point.

"Configuring VLANs," describes VLANs and how to create and configure them.

"Configuring Filters and Quality of Service," describes Quality of Service (QoS) and provides information about establishing QoS on an access point.

"Configuring Proxy Mobile IP," defines proxy Mobile IP and provides information on configuring this feature on your access point.

"Configuring Other Settings," identifies and describes other access point configuration settings such as notifications and server setup.

"Security Setup,"describes how to set up and enable the access point's security features.

"Network Management," describes how to use the web-based management system to browse to other devices on a wireless network.

"Managing Firmware and Configurations," describes how to update the access point's firmware and use the management system to distribute firmware and configurations to other access points.

"Management System Setup," describes methods of managing the access point other than through the access point management system.

"Special Configurations," describes how to set up the access point in network roles other than as a root unit on a wired LAN, such as in repeater or Hot Standby mode.

"Diagnostics and Troubleshooting," describes how to identify and resolve some of the problems that might arise when you configure an access point running this software release.

"Protocol Filter Lists," lists the protocols you can select for filtering on the management system's Protocol Filters pages.

"Channels, Power Levels, and Antenna Gains," lists the channels supported by the world's regulatory domains.

"Event Log Messages," defines event log error messages and recommends corrective action.

Conventions

This publication uses the following conventions to convey instructions and information:

Command descriptions use these conventions:

•Commands and keywords are in boldface text.

Notes and cautions use the following conventions and symbols:

Note Means reader take note. Notes contain helpful suggestions or references to materials not contained in this manual.

Tip Means the following are useful tips.

Caution Means reader be careful. In this situation, you might do something that could result in equipment damage or loss of data.

Related Publications

The following documents provide more information about access points and related products:

•Quick Start Guide: Cisco Aironet Access Points describes how to attach cables, power on, and assign an IP address and default gateway for the access point.

•Cisco Aironet Access Point Hardware Installation Guide describes the access point's hardware features, its physical and performance characteristics, and how to install the access point.

•Release Notes for Cisco Aironet 340 and 350 Series Access Points and 350 Series Bridges describes features and caveats for access points running firmware release 12.x.

•Cisco Secure Access Control Server for Windows 2000/NT Servers Version 2.6 User Guide provides complete instructions for using Cisco Secure ACS, including steps for configuring Cisco Secure ACS to support access points.

•Quick Start Guide: Cisco Aironet Wireless LAN Adapters describes how to install and configure PC and PCI client adapter cards for use in a wireless LAN.

•Cisco Aironet Wireless LAN Adapter Installation and Configuration Guide provides hardware features, physical and performance characteristics, and installation instructions for PC and PCI Card client adapters. It also provides instructions for installing and using the wireless client adapter utilities.

•Introduction to Mobile IP is a white paper, available on Cisco.com, that provides an explanation of Mobile IP and how it is used in wired networks.

Obtaining Documentation

Cisco provides several ways to obtain documentation, technical assistance, and other technical resources. These sections explain how to obtain technical information from Cisco Systems.

Cisco.com

You can access the most current Cisco documentation on the World Wide Web at this URL:

http://www.cisco.com/univercd/home/home.htm

You can access the Cisco website at this URL:

http://www.cisco.com

International Cisco websites can be accessed from this URL:

http://www.cisco.com/public/countries_languages.shtml

Documentation CD-ROM

Cisco documentation and additional literature are available in a Cisco Documentation CD-ROM package, which may have shipped with your product. The Documentation CD-ROM is updated regularly and may be more current than printed documentation. The CD-ROM package is available as a single unit or through an annual or quarterly subscription.

Registered Cisco.com users can order a single Documentation CD-ROM (product number DOC-CONDOCCD=) through the Cisco Ordering tool:

http://www.cisco.com/en/US/partner/ordering/ordering_place_order_ordering_tool_launch.html

All users can order annual or quarterly subscriptions through the online Subscription Store:

http://www.cisco.com/go/subscription

Ordering Documentation

You can find instructions for ordering documentation at this URL:

http://www.cisco.com/univercd/cc/td/doc/es_inpck/pdi.htm

You can order Cisco documentation in these ways:

•Registered Cisco.com users (Cisco direct customers) can order Cisco product documentation from the Networking Products MarketPlace:

http://www.cisco.com/en/US/partner/ordering/index.shtml

•Nonregistered Cisco.com users can order documentation through a local account representative by calling Cisco Systems Corporate Headquarters (California, USA.) at 408 526-7208 or, elsewhere in North America, by calling 800 553-NETS (6387).

Documentation Feedback

You can submit comments electronically on Cisco.com. On the Cisco Documentation home page, click Feedback at the top of the page.

You can send your comments in e-mail to bug-doc@cisco.com.

You can submit comments by using the response card (if present) behind the front cover of your document or by writing to the following address:

Cisco Systems
Attn: Customer Document Ordering
170 West Tasman Drive
San Jose, CA 95134-9883

We appreciate your comments.

Obtaining Technical Assistance

For all customers, partners, resellers, and distributors who hold valid Cisco service contracts, the Cisco Technical Assistance Center (TAC) provides 24-hour, award-winning technical support services, online and over the phone. Cisco.com features the Cisco TAC website as an online starting point for technical assistance.

Cisco TAC Website

The Cisco TAC website (http://www.cisco.com/tac) provides online documents and tools for troubleshooting and resolving technical issues with Cisco products and technologies. The Cisco TAC website is available 24 hours a day, 365 days a year.

Accessing all the tools on the Cisco TAC website requires a Cisco.com user ID and password. If you have a valid service contract but do not have a login ID or password, register at this URL:

http://tools.cisco.com/RPF/register/register.do

Opening a TAC Case

The online TAC Case Open Tool (http://www.cisco.com/tac/caseopen) is the fastest way to open P3 and P4 cases. (Your network is minimally impaired or you require product information). After you describe your situation, the TAC Case Open Tool automatically recommends resources for an immediate solution. If your issue is not resolved using these recommendations, your case will be assigned to a Cisco TAC engineer.

For P1 or P2 cases (your production network is down or severely degraded) or if you do not have Internet access, contact Cisco TAC by telephone. Cisco TAC engineers are assigned immediately to P1 and P2 cases to help keep your business operations running smoothly.

To open a case by telephone, use one of the following numbers:

Asia-Pacific: +61 2 8446 7411 (Australia: 1 800 805 227)
EMEA: +32 2 704 55 55
USA: 1 800 553-2447

For a complete listing of Cisco TAC contacts, go to this URL:

http://www.cisco.com/warp/public/687/Directory/DirTAC.shtml

TAC Case Priority Definitions

To ensure that all cases are reported in a standard format, Cisco has established case priority definitions.

Priority 1 (P1)—Your network is "down" or there is a critical impact to your business operations. You and Cisco will commit all necessary resources around the clock to resolve the situation.

Priority 2 (P2)—Operation of an existing network is severely degraded, or significant aspects of your business operation are negatively affected by inadequate performance of Cisco products. You and Cisco will commit full-time resources during normal business hours to resolve the situation.

Priority 3 (P3)—Operational performance of your network is impaired, but most business operations remain functional. You and Cisco will commit resources during normal business hours to restore service to satisfactory levels.

Priority 4 (P4)—You require information or assistance with Cisco product capabilities, installation, or configuration. There is little or no effect on your business operations.

Obtaining Additional Publications and Information

Information about Cisco products, technologies, and network solutions is available from various online and printed sources.

•The Cisco Product Catalog describes the networking products offered by Cisco Systems, as well as ordering and customer support services. Access the Cisco Product Catalog at this URL:

http://www.cisco.com/en/US/products/products_catalog_links_launch.html

•Cisco Press publishes a wide range of networking publications. Cisco suggests these titles for new and experienced users: Internetworking Terms and Acronyms Dictionary, Internetworking Technology Handbook, Internetworking Troubleshooting Guide, and the Internetworking Design Guide. For current Cisco Press titles and other information, go to Cisco Press online at this URL:

http://www.ciscopress.com

•Packet magazine is the Cisco quarterly publication that provides the latest networking trends, technology breakthroughs, and Cisco products and solutions to help industry professionals get the most from their networking investment. Included are networking deployment and troubleshooting tips, configuration examples, customer case studies, tutorials and training, certification information, and links to numerous in-depth online resources. You can access Packet magazine at this URL:

http://www.cisco.com/go/packet

•iQ Magazine is the Cisco bimonthly publication that delivers the latest information about Internet business strategies for executives. You can access iQ Magazine at this URL:

http://www.cisco.com/go/iqmagazine

•Internet Protocol Journal is a quarterly journal published by Cisco Systems for engineering professionals involved in designing, developing, and operating public and private internets and intranets. You can access the Internet Protocol Journal at this URL:

http://www.cisco.com/en/US/about/ac123/ac147/about_cisco_the_internet_protocol_journal.html

•Training—Cisco offers world-class networking training. Current offerings in network training are listed at this URL:

http://www.cisco.com/en/US/learning/index.html

	Cisco Aironet Access Point Software Configuration Guide for VxWorks
	Preface
Cisco Aironet Access Point Software Configuration Guide for VxWorks Preface Overview Using the Management Interfaces Configuring the Radio and Basic Settings Configuring VLANs Configuring Filters and Quality of Service Configuring Proxy Mobile IP Configuring Other Settings Security Setup Network Management Managing Firmware and Configurations Management System Setup Special Configurations Diagnostics and Troubleshooting Appendix A - Protocol Filter Lists Appendix B - Channels, Power Levels, and Antenna Gains Appendix C - Event Log Messages Index	Download this chapter Preface Download the complete book Cisco Aironet Access Point Software Configuration Guide (PDF - 5 MB) Feedback Table Of Contents Preface Audience and Scope Organization Conventions Related Publications Obtaining Documentation Cisco.com Documentation CD-ROM Ordering Documentation Documentation Feedback Obtaining Technical Assistance Cisco TAC Website Opening a TAC Case TAC Case Priority Definitions Obtaining Additional Publications and Information Preface The Cisco Aironet Access Point Software Configuration Guide describes how to configure Cisco Aironet Access Points using the web-based management system. This manual also briefly describes how to use the console-based management system. The preface contains the following information: •Audience and Scope •Organization •Conventions •Related Publications •Obtaining Documentation, page xviii •Obtaining Technical Assistance, page xix •Obtaining Additional Publications and Information, page xxi Audience and Scope This guide is for the network manager responsible for configuring a wireless network. Before using the material in this guide, you should be familiar with some of the concepts and terminology of Ethernet and wireless local area networking. The scope of this guide is to provide the information you need to change the configuration of an access point, use the access point management system to browse to other devices on a wireless network, and troubleshoot problems with the access point that might arise. Organization This guide is organized into the following chapters: "Overview," is a functional overview of the access point management system. It describes the features of the management system and the access point's role in a wireless network. "Using the Management Interfaces," describes how to use the web-based and console-based management interfaces. "Configuring the Radio and Basic Settings," describes the how to use the web-based management system to configure the access point. "Configuring VLANs," describes VLANs and how to create and configure them. "Configuring Filters and Quality of Service," describes Quality of Service (QoS) and provides information about establishing QoS on an access point. "Configuring Proxy Mobile IP," defines proxy Mobile IP and provides information on configuring this feature on your access point. "Configuring Other Settings," identifies and describes other access point configuration settings such as notifications and server setup. "Security Setup,"describes how to set up and enable the access point's security features. "Network Management," describes how to use the web-based management system to browse to other devices on a wireless network. "Managing Firmware and Configurations," describes how to update the access point's firmware and use the management system to distribute firmware and configurations to other access points. "Management System Setup," describes methods of managing the access point other than through the access point management system. "Special Configurations," describes how to set up the access point in network roles other than as a root unit on a wired LAN, such as in repeater or Hot Standby mode. "Diagnostics and Troubleshooting," describes how to identify and resolve some of the problems that might arise when you configure an access point running this software release. "Protocol Filter Lists," lists the protocols you can select for filtering on the management system's Protocol Filters pages. "Channels, Power Levels, and Antenna Gains," lists the channels supported by the world's regulatory domains. "Event Log Messages," defines event log error messages and recommends corrective action. Conventions This publication uses the following conventions to convey instructions and information: Command descriptions use these conventions: •Commands and keywords are in boldface text. Notes and cautions use the following conventions and symbols: Note Means reader take note. Notes contain helpful suggestions or references to materials not contained in this manual. Tip Means the following are useful tips. Caution Means reader be careful. In this situation, you might do something that could result in equipment damage or loss of data. Related Publications The following documents provide more information about access points and related products: •Quick Start Guide: Cisco Aironet Access Points describes how to attach cables, power on, and assign an IP address and default gateway for the access point. •Cisco Aironet Access Point Hardware Installation Guide describes the access point's hardware features, its physical and performance characteristics, and how to install the access point. •Release Notes for Cisco Aironet 340 and 350 Series Access Points and 350 Series Bridges describes features and caveats for access points running firmware release 12.x. •Cisco Secure Access Control Server for Windows 2000/NT Servers Version 2.6 User Guide provides complete instructions for using Cisco Secure ACS, including steps for configuring Cisco Secure ACS to support access points. •Quick Start Guide: Cisco Aironet Wireless LAN Adapters describes how to install and configure PC and PCI client adapter cards for use in a wireless LAN. •Cisco Aironet Wireless LAN Adapter Installation and Configuration Guide provides hardware features, physical and performance characteristics, and installation instructions for PC and PCI Card client adapters. It also provides instructions for installing and using the wireless client adapter utilities. •Introduction to Mobile IP is a white paper, available on Cisco.com, that provides an explanation of Mobile IP and how it is used in wired networks. Obtaining Documentation Cisco provides several ways to obtain documentation, technical assistance, and other technical resources. These sections explain how to obtain technical information from Cisco Systems. Cisco.com You can access the most current Cisco documentation on the World Wide Web at this URL: http://www.cisco.com/univercd/home/home.htm You can access the Cisco website at this URL: http://www.cisco.com International Cisco websites can be accessed from this URL: http://www.cisco.com/public/countries_languages.shtml Documentation CD-ROM Cisco documentation and additional literature are available in a Cisco Documentation CD-ROM package, which may have shipped with your product. The Documentation CD-ROM is updated regularly and may be more current than printed documentation. The CD-ROM package is available as a single unit or through an annual or quarterly subscription. Registered Cisco.com users can order a single Documentation CD-ROM (product number DOC-CONDOCCD=) through the Cisco Ordering tool: http://www.cisco.com/en/US/partner/ordering/ordering_place_order_ordering_tool_launch.html All users can order annual or quarterly subscriptions through the online Subscription Store: http://www.cisco.com/go/subscription Ordering Documentation You can find instructions for ordering documentation at this URL: http://www.cisco.com/univercd/cc/td/doc/es_inpck/pdi.htm You can order Cisco documentation in these ways: •Registered Cisco.com users (Cisco direct customers) can order Cisco product documentation from the Networking Products MarketPlace: http://www.cisco.com/en/US/partner/ordering/index.shtml •Nonregistered Cisco.com users can order documentation through a local account representative by calling Cisco Systems Corporate Headquarters (California, USA.) at 408 526-7208 or, elsewhere in North America, by calling 800 553-NETS (6387). Documentation Feedback You can submit comments electronically on Cisco.com. On the Cisco Documentation home page, click Feedback at the top of the page. You can send your comments in e-mail to bug-doc@cisco.com. You can submit comments by using the response card (if present) behind the front cover of your document or by writing to the following address: Cisco Systems Attn: Customer Document Ordering 170 West Tasman Drive San Jose, CA 95134-9883 We appreciate your comments. Obtaining Technical Assistance For all customers, partners, resellers, and distributors who hold valid Cisco service contracts, the Cisco Technical Assistance Center (TAC) provides 24-hour, award-winning technical support services, online and over the phone. Cisco.com features the Cisco TAC website as an online starting point for technical assistance. Cisco TAC Website The Cisco TAC website (http://www.cisco.com/tac) provides online documents and tools for troubleshooting and resolving technical issues with Cisco products and technologies. The Cisco TAC website is available 24 hours a day, 365 days a year. Accessing all the tools on the Cisco TAC website requires a Cisco.com user ID and password. If you have a valid service contract but do not have a login ID or password, register at this URL: http://tools.cisco.com/RPF/register/register.do Opening a TAC Case The online TAC Case Open Tool (http://www.cisco.com/tac/caseopen) is the fastest way to open P3 and P4 cases. (Your network is minimally impaired or you require product information). After you describe your situation, the TAC Case Open Tool automatically recommends resources for an immediate solution. If your issue is not resolved using these recommendations, your case will be assigned to a Cisco TAC engineer. For P1 or P2 cases (your production network is down or severely degraded) or if you do not have Internet access, contact Cisco TAC by telephone. Cisco TAC engineers are assigned immediately to P1 and P2 cases to help keep your business operations running smoothly. To open a case by telephone, use one of the following numbers: Asia-Pacific: +61 2 8446 7411 (Australia: 1 800 805 227) EMEA: +32 2 704 55 55 USA: 1 800 553-2447 For a complete listing of Cisco TAC contacts, go to this URL: http://www.cisco.com/warp/public/687/Directory/DirTAC.shtml TAC Case Priority Definitions To ensure that all cases are reported in a standard format, Cisco has established case priority definitions. Priority 1 (P1)—Your network is "down" or there is a critical impact to your business operations. You and Cisco will commit all necessary resources around the clock to resolve the situation. Priority 2 (P2)—Operation of an existing network is severely degraded, or significant aspects of your business operation are negatively affected by inadequate performance of Cisco products. You and Cisco will commit full-time resources during normal business hours to resolve the situation. Priority 3 (P3)—Operational performance of your network is impaired, but most business operations remain functional. You and Cisco will commit resources during normal business hours to restore service to satisfactory levels. Priority 4 (P4)—You require information or assistance with Cisco product capabilities, installation, or configuration. There is little or no effect on your business operations. Obtaining Additional Publications and Information Information about Cisco products, technologies, and network solutions is available from various online and printed sources. •The Cisco Product Catalog describes the networking products offered by Cisco Systems, as well as ordering and customer support services. Access the Cisco Product Catalog at this URL: http://www.cisco.com/en/US/products/products_catalog_links_launch.html •Cisco Press publishes a wide range of networking publications. Cisco suggests these titles for new and experienced users: Internetworking Terms and Acronyms Dictionary, Internetworking Technology Handbook, Internetworking Troubleshooting Guide, and the Internetworking Design Guide. For current Cisco Press titles and other information, go to Cisco Press online at this URL: http://www.ciscopress.com •Packet magazine is the Cisco quarterly publication that provides the latest networking trends, technology breakthroughs, and Cisco products and solutions to help industry professionals get the most from their networking investment. Included are networking deployment and troubleshooting tips, configuration examples, customer case studies, tutorials and training, certification information, and links to numerous in-depth online resources. You can access Packet magazine at this URL: http://www.cisco.com/go/packet •iQ Magazine is the Cisco bimonthly publication that delivers the latest information about Internet business strategies for executives. You can access iQ Magazine at this URL: http://www.cisco.com/go/iqmagazine •Internet Protocol Journal is a quarterly journal published by Cisco Systems for engineering professionals involved in designing, developing, and operating public and private internets and intranets. You can access the Internet Protocol Journal at this URL: http://www.cisco.com/en/US/about/ac123/ac147/about_cisco_the_internet_protocol_journal.html •Training—Cisco offers world-class networking training. Current offerings in network training are listed at this URL: http://www.cisco.com/en/US/learning/index.html
	Terms & Conditions \| Privacy Statement \| Cookie Policy \| Trademarks