This page enables you to add users to the system, remove users from the system, and assign user capabilities.

Administrator Authenticated by:

• Default Authentication (Global Password)
• Local List Only (Individual Passwords)
• Authentication Server Only
• Authentication Server if not found in Local List

You are required to define at least one server and check Use for Admin Authentication on the Server Manager screen if you select either Authentication Server Only or Authentication Server if not found in Local List.

If you choose Local List Only or Authentication Server if not found in Local List, you must first go to the Local User List section on the bottom of the screen, enter the user information, and click Apply to add each entry. If you don't proceed in this order, you cannot access the access point as one of the users.

Default Authentication (Global Password)

Default Authentication Password

If you chose Default Authentication in the Administrator Authenticated by field above, you must determine the authentication password to use as the default. Using this authentication, the username is skipped, and only a password is entered. The Default Authentication Password is the same as the Enable password in IOS.

Note: When you enter a password, the following six characters are not allowed: ?, ", $, [, and +.

Confirm Authentication Password

Re-enter this default password for confirmation.

Local User List (Individual Passwords)

User List

Any assigned users are displayed in the Local User List. You must add user information and click Apply on this portion of the screen before selecting the Local List Only or Authentication Server Only options in the Administrator Authentication By section at the top of the screen. If you want to delete a user, highlight the name in the User List and click Delete.

Username

Enter a username for the new user.

Password

Enter a password for the new user.

Note: When you enter a password, the following six characters are not allowed: ?, ", $, [, and +.

Confirm Password

Reenter the password.

Capability Settings

Click to select read-only or read-write capabilities. Only the following pages are available to users with Read-Only capabilities:

• Home (ap_home.htm)
• Network Map (ap_network-map.htm)
• Association (ap_assoc.htm)
• Network Interfaces Summary (ap_network-if.htm)
• System Software Summary (ap_system-sw.htm)
• Event Log (ap_event-log.htm)