Informationen zu Sicherheit und Leistung
Lesen Sie die folgenden Sicherheitshinweise, bevor Sie das IP-Telefon installieren oder verwenden.
Warning |
WICHTIGE SICHERHEITSHINWEISE Dieses Warnsymbol bedeutet Gefahr. Sie befinden sich in einer Situation, die zu Verletzungen führen kann. Machen Sie sich vor der Arbeit mit Geräten mit den Gefahren elektrischer Schaltungen und den üblichen Verfahren zur Vorbeugung von Unfällen vertraut. Suchen Sie mit der am Ende jeder Warnung angegebenen Hinweisnummer nach der jeweiligen Übersetzung in den Sicherheitshinweisen, die diesem Gerät beiliegt. Hinweis 1071 BEWAHREN SIE DIESE HINWEISE GUT AUF. |
Um die Übersetzungen der Warnungen in dieser Publikation zu lesen, sehen Sie unter der Hinweisnummer in Informationen zu Konformität und Sicherheit - Cisco schnurlos IP-Telefon 882x-Serie unter folgender URL nach:http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/cuipph/882x/english/RCSI/RCSI-0266-book.pdf
Warning |
Lesen Sie die Installationsanweisungen, bevor Sie das System verwenden, installieren oder an die Stromversorgung anschließen. Hinweis 1004 |
Warning |
Bei Stromausfall oder -unterbrechung funktionieren der VoIP-Dienst (Voice over IP) und der Notrufdienst nicht. Nach Wiederherstellung der Stromversorgung müssen Sie das Gerät möglicherweise zurücksetzen oder neu konfigurieren, um VoIP und den Notrufdienst wieder verwenden zu können. In Deutschland lautet die Nummer für den Notruf 112. Ihnen muss die Notrufnummer in Ihrem Land bekannt sein. Hinweis 361 |
Warning |
Bei der Entsorgung dieses Produkts müssen alle nationalen Gesetze und Bestimmungen beachtet werden. Hinweis 1040 |
Warning |
Der Stecker muss jederzeit aus der Steckdose gezogen werden können, um die Stromversorgung zu unterbrechen. Hinweis 1019 |
Sicherheitsrichtlinien
Die folgenden Sicherheitsrichtlinien beziehen sich auf die Verwendung von Cisco schnurlos IP-Telefon 8821 und 8821-EX in bestimmten Umgebungen:
-
Verwenden Sie dieses Produkt nicht als primäres Kommunikationstool in Krankenhäusern, da es ein nicht geregeltes Frequenzband verwenden kann, das anfällig für Störungen von anderen Geräten ist.
-
Die Verwendung von drahtlosen Geräten in Krankenhäusern unterliegt den jeweiligen Vorschriften des Krankenhauses.
-
Die Verwendung von Mobilgeräten an gefährlichen Standorten ist durch die Einschränkungen begrenzt, die von Sicherheitsdirektor dieser Umgebung festgelegt werden.
-
Die Verwendung von drahtlosen Geräten in Flugzeugen unterliegt der Federal Aviation Administration (FAA).
Sicherheitshinweise zur Batterie
Die Sicherheitshinweise zur Batterie gelten für Batterien, die für Cisco schnurlos IP-Telefon 8821 und 8821-EX zugelassen sind.
Warning |
Wenn die Batterie nicht vorschriftsmäßig ausgetauscht wird, besteht Explosionsgefahr. Ersetzen Sie die Batterie nur durch denselben oder einen äquivalenten Typ, der vom Hersteller empfohlen wird. Entsorgen Sie gebrauchte Batterien gemäß den Anweisungen des Herstellers. Hinweis 1015 |
Warning |
Berühren Sie die Brücke der Metallkontakte auf der Batterie nicht. Das unbeabsichtigte Entladen der Batterien kann schwere Verbrennungen verursachen. Hinweis 341 |
Warning |
Explosionsgefahr: Laden Sie die Telefonbatterie nicht in einer potenziell explosionsfähigen Umgebung. Hinweis 431 |
Warning |
Lithium-Ionen-Akkus haben eine begrenzte Lebensdauer. Jeder Lithium-Ionen-Akku, der Anzeichen von Schäden (einschließlich Aufquellen) anzeigt, sollte umgehend entsorgt werden. |
Vorsicht |
|
Wenden Sie sich bezüglich einer neuen Batterie an Ihren örtlichen Händler. Verwenden Sie ausschließlich Batterien, die über eine Teilenummer von Cisco verfügen.
- Batterie
-
CP-BATT-8821=
Verwenden Sie nur den Akku von Cisco, der mit Ihrem Telefon kompatibel ist. Um ein Netzteil zu bestellen, wenden Sie sich an Ihren Händler vor Ort. Die Teilenummer finden Sie in der Liste der Teilenummern von Cisco.
- Argentinien
-
CP-PWR-8821-AR=
- Australien
-
CP-PWR-8821-AU=
- Brasilien
-
CP-PWR-8821-BZ=
- Europa
-
CP-PWR-8821-CE=
- Korea
-
CP-PWR-8821-KR=
- Japan
-
CP-PWR-8821-JP=
- Schweiz
-
CP-PWR-8821-SW=
- Nordamerika
-
CP-PWR-8821-NA=
- Großbritannien und Nordirland
-
CP-PWR-8821-UK=
Hinweis |
Die Batterie und das Netzteil sind nicht im Lieferumfang des Telefons enthalten. Wenn Sie eine Batterie oder ein Netzteil bestellen möchten, wenden Sie sich an Ihren örtlichen Händler. |
Gefährliche Umgebungen
Cisco Wireless IP Phone 8821-EX ist ein für die ATEX Klasse I Zone 2 und CSA Klasse I Division 2/Zone 2 zertifiziertes Gerät. Dies bedeutet, dass das Telefon in Umgebungen verwendet werden kann, in denen das Auftreten einer explosionsfähigen Gasatmosphäre unter normalen Betriebsbedingungen unwahrscheinlich ist und dieser Fall nur selten und für einen kurzen Zeitraum eintritt.
Warning |
Explosionsgefahr – Laden Sie die Telefonbatterie nicht in einer potenziell explosionsfähigen Atmosphäre. Hinweis 431 |
Warning |
Explosionsgefahr – Der Austausch von Komponenten kann die Eignung für Klasse 1, Division 2/Zone 2 beeinträchtigen. Hinweis 1083 |
Stromausfall
Die Möglichkeit des Zugriffs auf Notrufdienste über das Telefon hängt davon ab, ob der WLAN-Zugangspunkt mit Strom versorgt wird. Bei einem Stromausfall können Notrufnummern erst nach Wiederherstellung der Stromzufuhr gewählt werden. Bei einer Unterbrechung der Stromversorgung oder bei einem Stromausfall müssen Sie das Gerät möglicherweise zurücksetzen oder neu konfigurieren, um Notrufnummern wählen zu können.
Zulassungen
Die Funkfrequenz dieses Telefons ist gemäß den Bestimmungen eines bestimmten Regulierungsbereichs konfiguriert. Wenn Sie das Telefon außerhalb des jeweiligen Geltungsbereichs einsetzen, funktioniert es nicht ordnungsgemäß, und Sie verstoßen möglicherweise gegen örtliche Gesetze oder Bestimmungen.
Umgebungen im Gesundheitswesen
Dieses Produkt ist kein medizinisches Gerät und verwendet ein nicht lizenziertes Frequenzband, das anfällig für Störungen durch andere Geräte oder Komponenten ist.
Externe Geräte verwenden
Die folgenden Informationen beziehen sich auf die Verwendung des drahtlosen Telefons mit externen Geräten.
Cisco empfiehlt, ausschließlich qualitativ hochwertige externe Komponenten (z. B. Headsets) zu verwenden, die gegen unerwünschte Hochfrequenz- (HF) und Niederfrequenzsignale (NF) abgeschirmt sind.
Je nach der Qualität dieser Geräte und deren Abstand zu anderen Geräten wie Mobiltelefonen oder Funkgeräten kann trotzdem ein geringes Rauschen auftreten. In diesen Fällen empfiehlt Cisco folgende Maßnahmen:
-
Vergrößern Sie den Abstand zwischen dem externen Gerät und der RF- oder AF-Signalquelle.
-
Verlegen Sie die Anschlusskabel des externen Geräts in einem möglichst großen Abstand zur RF- oder AF-Signalquelle.
-
Verwenden Sie für das externe Gerät abgeschirmte Kabel oder Kabel mit hochwertiger Abschirmung und hochwertigen Anschlusssteckern.
-
Kürzen Sie das Anschlusskabel des externen Geräts.
-
Führen Sie die Kabel des externen Geräts durch einen Ferritkern oder eine ähnliche Vorrichtung.
Cisco kann keine Garantie in Bezug auf die Leistung des Systems übernehmen, da das Unternehmen keinerlei Einfluss auf die Qualität der verwendeten externen Gerätekomponenten, Kabel und Stecker hat. Das System arbeitet mit angemessener Leistung, wenn geeignete Komponenten mithilfe qualitativ hochwertiger Kabel und Stecker angeschlossen werden.
Vorsicht |
Verwenden Sie in EU-Ländern ausschließlich externe Headsets, die der EU-Richtlinie 89/336/EWG voll entsprechen. |
Verhalten des Telefons bei Netzwerküberlastung
Alles, was zu einer Verschlechterung der Netzwerkleistung führt, kann auch die Audioqualität des Telefons beeinträchtigen. In manchen Fällen kann es sogar zu einem Abbruch des Telefonats kommen. Eine Netzwerküberlastung kann unter anderem von folgenden Aktivitäten verursacht werden:
-
Verwaltungsaufgaben, beispielsweise die Überprüfung von internen Anschlüssen oder der Sicherheit
-
Netzwerkangriffe, beispielsweise ein Denial-of-Service-Angriff
SAR
Dieses Produkt erfüllt den nationalen SAR-Höchstwert von 1,6W/kg. Sie finden die spezifischen maximalen SAR-Werte in Konformitätserklärung. Wenn Sie ein Produkt tragen oder verwenden, während es am Körper getragen wird, verwenden Sie ein genehmigtes Zubehör, beispielsweise ein Holster, oder halten Sie das Produkt 5 mm vom Körper entfernt, um die Einhaltung der HF-Belastungsanforderungen zu erfüllen. Beachten Sie, dass das Produkt auch strahlen kann, wenn kein Anruf aktiv ist. |
Produktetikett
Das Produktetikett befindet sich im Akkufach des Geräts.