Interface RX Utilization

Interface RX Utilization

This alarm monitors receiving traffic information and is triggered when interface RX utilization is outside the range you specify. To configure this alarm, do the following:

Procedure

Step 1

In the main window, click Crosswork Cloud Traffic Analysis icon > Configure > Policies.

Step 2

Click Add Policy.

Step 3

Enter a policy name in the Name field.

Step 4

Under Triggers, click Add Rules.

Step 5

Click Interface RX Utilization.

Step 6

Click Next.

Step 7

By default, the rule is enabled. Toggle the switch to DISABLED if you do not want to activate the rule yet.

Step 8

Use the slider to indicate utilization ranges that will trigger this alarm. Crosswork Cloud will send a notification if utilization is within the range indicated by the color red and ALARM text.

Step 9

Under the Severity drop-down list, select the severity level you want defined for this alarm.

Step 10

Make any other necessary interface and endpoint notification configurations, then click Save.