Troubleshooting Deployment Errors From APIC
When deploying tenant policies you have configured in a Cisco ACI Multi-Site schema, you may receive errors or issues may occur. To troubleshoot these errors and issues follow these steps.
Procedure
Step 1 |
If you receive an APIC error after clicking DEPLOY TO SITES, correct any problems and try to deploy the schema/template again. For example, errors can be of two kinds:
|
Step 2 |
If the schema is deployed successfully, but traffic does not flow, perform the following steps:
|
Step 3 |
If you find no errors, the problem may be with APIC, switches, the IPN or the WAN. |