Regular Zones
You can view all the Regular Zones that are configured on SAN Controller. Choose SAN > Active Zones > Regular Zones tab. The following table describes the fields that appear on this screen.
Field |
Description |
||
---|---|---|---|
Group |
Specifies the name of the fabric. |
||
VSANS |
Specifies the number of VSANS configured on this Zone. |
||
Zone Sets |
Specifies the name of zone set to which the zone belongs. |
||
Zone |
Displays the zone under which this member is present. From Release 12.1.2e, you can click Topology icon next to the Zone name to view Zone Topology. The topology is displayed in Hierarchical Left-Right layout by default. In the topology view, hover on the nodes to see tool tip. Click on switch to view the switch summary. Click Launch icon to view Switch Overview.
|
||
Switch Interface/WWN |
Specifies the switch interface or WWN of the switch that the zone member is attached to. |
||
PWWN |
Specifies the associated pWWN to the switch. |
||
Member Name |
Displays the name of the zone member. |
||
Zoned By |
Displays the type of zoning. You can search by type of zoning such as WWN, FCID, fcAlias, or iSCSI. |