Storage Arrays
This tab displays information about storage arrays.
The following table describes the fields that appear on SAN > Storage > Storage Arrays.
Field |
Description |
---|---|
storageName |
Specifies the storage name. Click on the storageName to view the Storage Enclosure details. For more information on the tabs displayed, refer to storageName Enclosure. |
WWN |
Specifies the world wide name (WWN) of the storage device. Only storage array PWWN that are discovered via fabric discovery are displayed. However, storage array may have more ports than specified here. |
storageName Enclosure
Click on the storageName item to view the detailed information about each storage array.
The details of a Storage Array depends on the type of array discovered, and the provider’s adherence to the SMI-S standards. Click of the array to load the inventory page, starting with a summary tab, and other context specific tabs based on the type of array.
The following tabs provide relevant information:
- Summary
This table provides information about the provider. Storage array Serial Number, Storage type and Number of Physical Disks in the array are also displayed.
- Components
This tab lists all the components in the Storage.
Click on the component Name to view total storage capacity, usage details, and physical disks details.
- Pools
This tab lists all the pools, their status and Raw capacity. Click on POOL Name to view the pool details.
- LUNs
This tab lists all the LUNs in the storage array. It provides LUN ID, WWN, Status, and Capacity details for each LUN. Click on LUN Name to view further details about each LUN. You can also view the Host LUN Access information in the LUN Detail view.
Host Port PWWN, Host Interface, Zoning, and Storage Interface values in Host LUN Access table is displayed only if the host accessing this LUN is a part of the NDFC discovered fabric.
- Host
This tab lists all the hosts in the selected storage. It provides the Host name, Node WWN, and WWN details for each host in the Storage array. Click on a Host Name to view details about the host. You can view the relevant details on the LUNs tab and Ports tab within the Host Detail view.
Host Interface, Zoning, and Storage Interface values in LUNs Tab > Host LUN Access table is displayed only if the host accessing this LUN is part of the NDFC discovered fabric.
Fabric and Host Interface values in Host Ports table is displayed only if Host Port WWN is part of the NDFC discovered fabric.
- Processors
This tab lists all the Processors and their Status. It also shows the number of adapters for each processor. Click on a Processor Name to view the details.
- Ports
This tab lists all the Ports within the Storage array. Click on Port Name to view details about the port.
Host Interface, Zoning, and Storage Interface values in the Host LUN Access table is displayed only if Host accessing the LUN in LUN ID column is part of the NDFC discovered fabric.