New and Changed Information
|
Feature |
Description |
Changed in Release |
Where Documented |
|---|---|---|---|
|
QDD-4X100G-FR-S and QDD-4X100G-LR-S optics support |
Added support for QDD-4X100G-FR-S and QDD-4X100G-LR-S optics on Nexus 98900CD-A line card. |
10.4(3)F |
|
|
DP04QSDD-HE0 |
Added support for DP04QSDD-HE0 in 1x400 and 4x100 mux ponder modes on GX/GX2 platform and X98900CD-A and X9836DM-A line cards. |
10.4(3)F |
|
|
QDD-2X100-LR4-S |
Added support for QDD-2X100-LR4-S optics on Nexus9300-GX/GX2 Platform Switches. |
10.4(3)F |
|
|
QDD-4X100G-LR-S, and QDD-400G-LR4-S optics support |
Added support for QDD-4x100G-LR-S and QDD-400G-LR4-S" on X9716D-GX linecard |
10.4(3)F |
|
|
QDD-400G-ZR-S and QDD-400G-ZRP-S optics support |
Added support for QDD-400G-ZR-S and QDD-400G-ZRP-S optics on the C93400LD-H1 and C9332D-H2R switches. |
10.4(3)F |
|
|
4x 10G, 4x 25G, and 4X100G breakout options 2x200GE breakout with 400EG ports of X98900CD-A and all ports for X9836DM-A |
Added support for 4x10G, 4x25G, 4x100G breakout options and 10G with QSA on the Cisco Nexus X98900CD-A switch. 4x25G Breakout will be supported only on ports- 2,3,5,6,8,9,11,12,14,15,17,18,20,21,23,24,26,27,29,30,32,33,35,36,38,39,41,42,44,45,47,48 Added support for 2x200GE breakout with 400EG ports (3,6,9,12,15,18,21,27,30,33,36,39,42,45) of X98900CD-A and all ports for X9836DM-A |
10.4(3)F |
|
|
Layer 3 Port Channel BFD Support on 9800 |
Added support for BFD on Layer 3 port channel on Cisco Nexus 9800 switches |
10.4(3)F |
|
|
L3 PC , L3-PCsufif BFD - Mando8 and Mando4 |
Added support for single hop BFD on Cisco Nexus 9808 and 9804 L3 port-channel interfaces and port-channel sub-interfaces. |
10.4(3)F |
|
|
Native Speeds AN (100G/40G) |
Added Auto negotiation support for 100G/40G ports on last four ports of Cisco Nexus N9K-C9364C-H1 platform switches. |
10.4(3)F |
|
|
L2 forwarding |
Added support for L2 forwarding on Cisco Nexus N9K-C9364C-H1 platform switches. |
10.4(3)F |
|
|
L2 infra |
Added support for L2 infra on Cisco Nexus N9K-C9364C-H1 platform switches. |
10.4(3)F |
|
|
L3 forwarding |
Added support for L3 forwarding on Cisco Nexus N9K-C9364C-H1 platform switches. |
10.4(3)F |
|
|
QDD-400G-ZR and QDD-400G-ZRP-S optics support |
Added support for QDD-400G-ZR and QDD-400G-ZRP-S optics on the following switches and line cards:
|
10.4(2)F |
|
|
10 GB with QSA and 25G with QSA28 |
Added support for QSA28 for Cisco Nexus C93108TC-FX3 Switch |
10.4(2)F |
|
|
L2 forwarding |
Added support for L2 forwarding on Cisco Nexus 93400LD-H1 platform switches. |
10.4(2)F |
|
|
L2 infra |
Added support for L2 infra on Cisco Nexus 93400LD-H1 platform switches. |
10.4(2)F |
|
|
L3 forwarding |
Added support for L3 forwarding on Cisco Nexus 93400LD-H1 platform switches. |
10.4(2)F |
|
|
SFP-25G-ER-I |
Added support for SFP-25G-ER-I on the Cisco Nexus C93180YC-FX3 switch. |
10.4(2)F |
|
|
Native Speeds AN (100G/40G) |
Added Auto negotiation support for 100G/40G ports on last four ports of Cisco Nexus 93400LD-H1 platform switches. |
10.4(2)F |
|
|
25G via CVR-QSFP-SFP25G |
Added support for SFP28 for Cisco Nexus FX3 series switches |
10.4(1)F |
|
|
Interface counter support |
Added support and limitation for Cisco Nexus C9348GC-FX3PH |
10.4(1)F |
|
|
Management Interface |
Added configuration steps and example for Management Interface |
10.4(1)F |
|
|
Port-channel load-balance command for MPLS tagged traffic |
Added configuring for Port-channel load-balance command for MPLS tagged traffic |
10.4(1)F |
Configuring Load Balancing using Port Channels for MPLS Tagged Traffic |
|
4x 25, and 4x 10G breakout options on the Nexus 9800 36-port QSFP-DD 400G line card |
Added breakout (4x10G and 4x25G) ports support for N9K-X9836DM-A line card of Cisco Nexus 9808/9804 platform switches. |
10.4(1)F |
|
|
Native Speeds AN (100G/40G) |
Added Auto negotiation support for 100G/40G ports on the Cisco Nexus 9332D-H2R platform switches. |
10.4(1)F |
|
|
L2 forwarding |
Added support for L2 forwarding on Cisco Nexus 9332D-H2R platform switches. |
10.4(1)F |
|
|
L2 infra |
Added support for L2 infra on Cisco Nexus 9332D-H2R platform switches. |
10.4(1)F |
|
|
L3 forwarding |
Added support for L3 forwarding on Cisco Nexus 9332D-H2R platform switches. |
10.4(1)F |
|
|
L3 Physical and subinterface Stats |
Added statistics support for L3 Physical and Subinterface on Cisco Nexus 9804 platform switches. |
10.4(1)F |
|
|
Hashing based |
Added support for L3, Loopback, and Subinterfaces on Cisco Nexus 9804 platform switches. |
10.4(1)F |
|
|
Hashing based on source/destination IP and L4 port number |
Added hashing support of src/dst ip and src/dst L4 port number on Cisco Nexus 9804 platform switches, Cisco Nexus X98900CD-A, and Cisco Nexus KX9836DM-A line cards with Cisco Nexus 9808 and 9804 switches. |
10.4(1)F |
|
|
Single Hop BFD |
Added support for single-hop BFD on routed port, routed-sub interface, and breakout port of Cisco Nexus 9804 platform switches. |
10.4(1)F |
|
|
UDLD |
Added support for UDLD on Cisco Nexus 9804 platform switches, Cisco Nexus X98900CD-A, andCisco Nexus X9836DM-A line cards with Cisco Nexus 9808 and 9804 switches.. Added support for UDLD on X98900CD-A and N9KX9836DM-A line cards with Cisco Nexus 9808 and 9804 switches. |
10.4(1)F |
|
|
Single Hop BFD |
Added support for single-hop BFD on N9KX98900CD-A and N9KX9836DM-A line cards with Cisco Nexus 9808 and 9804 switches. |
10.4(1)F |
|
|
L3 Physical and subinterface Stats |
Added statistics support for L3 Physical and Subinterface on N9KX98900CD-A and N9KX9836DM-A line cards with Cisco Nexus 9808 and 9804 switches. |
10.4(1)F |
|
|
10G Optics support using CVR-QSFP-SFP10G adapter |
Added 10G Optics support using CVR-QSFP-SFP10G adapter for Cisco Nexus 9804 platform switches, and Cisco Nexus X98900CD-A and X9836DM-A line cards. |
10.3(1)F |
|
|
Tunnel enhancements |
Added support for IPv4 tunnel on GRE |
10.4(1)F |
Point-to-Point IP-in-IP Tunnel Encapsulation and Decapsulation |
|
LACP enhancements |
Added support for LACP layer 3 port channel for Nexus 9800 series switches |
10.4(1)F |
|
|
Configuring 400G Digital Coherent Optics |
Added support for 400G Digital Coherent Optics on Cisco Nexus 9300-GX2 and 9408 platform switches. |
10.4(1)F |
Feedback