Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide, Cisco IOS XE Fuji 16.8.x

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: March 21, 2018

Chapter: Overview of the SIP

Release History
Supported SIP Features
- Cisco ASR1000-SIP10 Features
- Cisco ASR1000-SIP40 Features
  - Cisco ASR1000-SIP10 High-Availability Features
Supported MIBS
Command Reference Information

Overview of the SIP

This chapter provides an overview of the release history, and feature and Management Information Base (MIB) support for the Cisco ASR1000-SIP10 and Cisco ASR1000-SIP40.

This chapter includes the following sections:

Release History
Supported SIP Features
Supported MIBS
Command Reference Information

Release History

Note

For release history information about the introduction of SPA support on the SIP, refer to the corresponding “Overview” chapters in the SPA technology sections of this document. In addition, features specific to certain SPA technologies are documented in the corresponding SPA sections of this document.

Release	Modification
Cisco IOS XE Release 3.7S	Added information about support for the Cisco ASR1000-SIP40 on all routers that support the Cisco ASR1000-SIP10.
Cisco IOS XE Release 3.1S	Added information about the new Cisco ASR1000-SIP40.
Cisco IOS XE Release 2.4S	Added information about the following SPAs: 2-Port, 4-Port, and 8-Port OC-12 POS SPA 1-Port OC-48 POS SPA 8-Port OC-3 POS SPA 1-Port OC-192 POS SPA WMA-K9 SPA
Cisco IOS XE Release 2.3S	Added information about the 1-Port and 3-Port OC-3 ATM SPA.
Cisco IOS XE Release 2.2S	Added information about the following SPAs: 2-Port and 4-Port OC-48c/STM-16 POS/RPR SPA 1-Port Channelized STM-1/OC-3 SPA
Cisco IOS XE Release 2.1S	First release.

Supported SIP Features

The Cisco ASR1000-SIP10, is a high-performance, feature-rich SPA interface processor that functions as a carrier card for shared port adapters (SPAs) on the Cisco ASR 1000 Series Routers. The SIP is supported on the Cisco Aggregation Services Router 1000 Series, and is compatible with one or more platform-independent SPAs. For more information on SPA compatibility, see the SIP and SPA Compatibility section.

This section provides a list of some of the primary features supported by the SIP hardware and software. For feature compatibility information by SIP and SPA combination, and information about configuring these features, see the Configuring the SIP chapter.

Cisco ASR1000-SIP10 Features
Cisco ASR1000-SIP40 Features

Cisco ASR1000-SIP10 Features

The Cisco ASR1000-SIP10 supports the standard Field-Programmable Devices (FPD) upgrade methods for the Cisco Aggregation Services Router 1000 Series. For more information about FPD support, see the Upgrading Field-Programmable Devices chapter.

Cisco ASR1000-SIP40 Features

The Cisco ASR1000-SIP40 supports upto 40 Gbps total bandwidth for the four SPA bays and 46 Gbps sustained through carrier card when utilizing two four-link 6.25 GHz ESIs. Following are the features of the Cisco ASR1000-SIP40:

It supports 40 Gbps of non oversubscribed throughput.
Compatible with existing and future SPAs, ESPs, and RPs.
It supports online-insertion-and-removal (OIR) of all SIP-10 SPAs and Cisco ASR1000-SIP40.
Provides higher port density support of 48 point dual priority, and 96 point single priority.
Enables enhanced QoS and timestamp support.
Performs ingress packet prioritization based on Layer 2 or Layer 3 headers.
Enables the flow-control the SPAs.
Distributes line clocking reference from a single SPA to the RPs.
It supports Onboard Failure Logging (OBFL).
All the SPAs on Cisco ASR1000-SIP40 provide FPD support.
From Release 3.7.0S onward, the Cisco ASR1000-SIP40 is supported on all the routers that support the Cisco ASR1000-SIP10.

Note

The Cisco ASR1000-SIP40 supports four half-height SPAs, two full-height SPAs, and a combination of two half-height and one full-height SPAs. The Cisco ASR1000-SIP40 does not support double-wide SPAs, double-high SPAs having two connectors.