- Cisco BGP Overview
- BGP 4
- Configuring a Basic BGP Network
- BGP Support for 4-byte ASN
- IPv6 Routing: Multiprotocol BGP Extensions for IPv6
- IPv6 Routing: Multiprotocol BGP Link-Local Address Peering
- IPv6 Multicast Address Family Support for Multiprotocol BGP
- Connecting to a Service Provider Using External BGP
- BGP Named Community Lists
- BGP Prefix-Based Outbound Route Filtering
- BGP Route-Map Continue Support for Outbound Policy
- Removing Private AS Numbers from the AS Path in BGP
- Configuring BGP Neighbor Session Options
- BGP Neighbor Policy
- BGP Dynamic Neighbors
- BGP Support for Next-Hop Address Tracking
- BGP Restart Neighbor Session After Max-Prefix Limit Reached
- BGP Support for Dual AS Configuration for Network AS Migrations
- Configuring Internal BGP Features
- BGP VPLS Auto Discovery Support on Route Reflector
- BGP NSF Awareness
- IPv6 NSF and Graceful Restart for MP-BGP IPv6 Address Family
- BGP Support for BFD
- BGP Support for MTR
- BGP Link Bandwidth
- iBGP Multipath Load Sharing
- BGP Multipath Load Sharing for Both eBGP and iBGP in an MPLS-VPN
- Loadsharing IP Packets Over More Than Six Parallel Paths
- BGP Policy Accounting
- BGP Policy Accounting Output Interface Accounting
- BGP Cost Community
- BGP Support for IP Prefix Import from Global Table into a VRF Table
- BGP Support for IP Prefix Export from a VRF Table into the Global Table
- BGP per Neighbor SoO Configuration
- Per-VRF Assignment of BGP Router ID
- BGP Next Hop Unchanged
- BGP Event-Based VPN Import
- BGP Best External
- BGP PIC Edge for IP and MPLS-VPN
- Configuring BGP: RT Constrained Route Distribution
- Configuring BGP Consistency Checker
- BGP MIB Support
- Cisco-BGP-MIBv2
- BGP Additional Paths
- BGP Attribute Filter and Enhanced Attribute Error Handling
- BGP—Support for iBGP Local-AS
- BGP-Multiple Cluster IDs
- BGP-RT and VPN Distinguisher Attribute Rewrite Wildcard
- BGP-VPN Distinguisher Attribute
- BGP-VRF-Aware Conditional Advertisement
- BGP Diverse Path Using a Diverse-Path Route Reflector
- BGP Graceful Shutdown
Contents
- Loadsharing IP Packets Over More Than Six Parallel Paths
- Finding Feature Information
- Overview of Loadsharing IP Packets over More Than Six Parallel Paths
- Additional References
- Feature Information for Loadsharing IP Packets Over More Than Six Parallel Paths
Loadsharing IP Packets Over More Than Six Parallel Paths
The Loadsharing IP Packets Over More Than Six Parallel Paths feature increases the maximum number of parallel routes that can be installed to the routing table for multipath loadsharing.
- Finding Feature Information
- Overview of Loadsharing IP Packets over More Than Six Parallel Paths
- Additional References
- Feature Information for Loadsharing IP Packets Over More Than Six Parallel Paths
Finding Feature Information
Your software release may not support all the features documented in this module. For the latest caveats and feature information, see Bug Search Tool and the release notes for your platform and software release. To find information about the features documented in this module, and to see a list of the releases in which each feature is supported, see the feature information table at the end of this module.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to www.cisco.com/go/cfn. An account on Cisco.com is not required.
Overview of Loadsharing IP Packets over More Than Six Parallel Paths
The Loadsharing IP Packets over More Than Six Parallel Paths feature increases the maximum number of parallel routes that can be installed to the routing table. The maximum number has been increased from six to sixteen for the following commands:
maximum-paths
maximum-paths eibgp
maximum-paths ibgp
The output of the show ip route summary command has been updated to display the number of parallel routes supported by the routing table.
The benefits of this feature include the following:
More flexible configuration of parallel routes in the routing table.
Ability to configure multipath loadsharing over more links to allow for the configuration of higher-bandwidth aggregation using lower-speed links.
Additional References
Related Documents
|
Related Topic |
Document Title |
|---|---|
|
Cisco IOS commands |
|
|
BGP commands |
|
|
eBGP multipath load sharing |
“BGP Multipath Load Sharing for Both eBGP and iBGP in an MPLS-VPN” module |
|
iBGP multipath load sharing |
“iBGP Multipath Load Sharing” module |
MIBs
|
MIB |
MIBs Link |
|---|---|
|
No new or modified MIBs are supported by this feature, and support for existing MIBs has not been modified by this feature. |
To locate and download MIBs for selected platforms, Cisco IOS XE software releases, and feature sets, use Cisco MIB Locator found at the following URL: |
Technical Assistance
Description |
Link |
|---|---|
|
The Cisco Support and Documentation website provides online resources to download documentation, software, and tools. Use these resources to install and configure the software and to troubleshoot and resolve technical issues with Cisco products and technologies. Access to most tools on the Cisco Support and Documentation website requires a Cisco.com user ID and password. |
Feature Information for Loadsharing IP Packets Over More Than Six Parallel Paths
The following table provides release information about the feature or features described in this module. This table lists only the software release that introduced support for a given feature in a given software release train. Unless noted otherwise, subsequent releases of that software release train also support that feature.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to . An account on Cisco.com is not required.