- Policing and Shaping Overview
- IPv6 QoS: MQC Traffic Policing
- Configuring Traffic Policing
- IPv6 QoS: MQC Traffic Shaping
- Two-Rate Policer
- Policer Enhancement - Multiple Actions
- Percentage-Based Policing and Shaping
- Modular QoS CLI Three-Level Hierarchical Policer
- ATM Policing by Service Category for SVC and SoftPVC
- Modular QoS CLI Unconditional Packet Discard
- Control Plane Policing
- Control Plane Protection
- Control Plane Logging
- Management Plane Protection
- Class-Based Policing
- QoS Percentage-Based Policing
- Overhead Accounting
- Adaptive QoS over DMVPN
Contents
- IPv6 QoS: MQC Traffic Shaping
- Finding Feature Information
- Information About IPv6 QoS: MQC Traffic Shaping
- Implementation Strategy for QoS for IPv6
- Traffic Policing in IPv6 Environments
- Additional References
- Feature Information for IPv6 QoS: MQC Traffic Shaping
IPv6 QoS: MQC Traffic Shaping
Traffic shaping allows you to limit the packet dequeue rate by holding additional packets in the queues and forwarding them as specified by parameters configured for traffic shaping features
- Finding Feature Information
- Information About IPv6 QoS: MQC Traffic Shaping
- Additional References
- Feature Information for IPv6 QoS: MQC Traffic Shaping
Finding Feature Information
Your software release may not support all the features documented in this module. For the latest caveats and feature information, see Bug Search Tool and the release notes for your platform and software release. To find information about the features documented in this module, and to see a list of the releases in which each feature is supported, see the feature information table at the end of this module.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to www.cisco.com/go/cfn. An account on Cisco.com is not required.
Information About IPv6 QoS: MQC Traffic Shaping
Implementation Strategy for QoS for IPv6
IPv6 packets are forwarded by paths that are different from those for IPv4. QoS features supported for IPv6 environments include packet classification, queueing, traffic shaping, weighted random early detection (WRED), class-based packet marking, and policing of IPv6 packets. These features are available at both the process switching and Cisco Express Forwarding switching paths of IPv6.
All of the QoS features available for IPv6 environments are managed from the modular QoS command-line interface (MQC). The MQC allows you to define traffic classes, create and configure traffic policies (policy maps), and then attach those traffic policies to interfaces.
To implement QoS in networks running IPv6, follow the same steps that you would follow to implement QoS in networks running only IPv4. At a very high level, the basic steps for implementing QoS are as follows:
Know which applications in your network need QoS.
Understand the characteristics of the applications so that you can make decisions about which QoS features would be appropriate.
Know your network topology so that you know how link layer header sizes are affected by changes and forwarding.
Create classes based on the criteria you establish for your network. In particular, if the same network is also carrying IPv4 traffic along with IPv6, decide if you want to treat both of them the same way or treat them separately and specify match criteria accordingly. If you want to treat them the same, use match statements such as match precedence, match dscp, set precedence, and set dscp. If you want to treat them separately, add match criteria such as match protocol ip and match protocol ipv6 in a match-all class map.
Create a policy to mark each class.
Work from the edge toward the core in applying QoS features.
Build the policy to treat the traffic.
Apply the policy.
Traffic Policing in IPv6 Environments
Congestion management for IPv6 is similar to IPv4, and the commands used to configure queueing and traffic shaping features for IPv6 environments are the same commands as those used for IPv4. Traffic shaping allows you to limit the packet dequeue rate by holding additional packets in the queues and forwarding them as specified by parameters configured for traffic shaping features. Traffic shaping uses flow-based queueing by default. CBWFQ can be used to classify and prioritize the packets. Class-based policer and generic traffic shaping (GTS) or Frame Relay traffic shaping (FRTS) can be used for conditioning and policing traffic.
Additional References
Related Documents
Related Topic |
Document Title |
|---|---|
|
IPv6 addressing and connectivity |
IPv6 Configuration Guide |
|
Cisco IOS commands |
|
|
IPv6 commands |
|
|
Cisco IOS IPv6 features |
Standards and RFCs
Standard/RFC |
Title |
|---|---|
|
RFCs for IPv6 |
MIBs
|
MIB |
MIBs Link |
|---|---|
|
|
To locate and download MIBs for selected platforms, Cisco IOS releases, and feature sets, use Cisco MIB Locator found at the following URL: |
Technical Assistance
Description |
Link |
|---|---|
|
The Cisco Support and Documentation website provides online resources to download documentation, software, and tools. Use these resources to install and configure the software and to troubleshoot and resolve technical issues with Cisco products and technologies. Access to most tools on the Cisco Support and Documentation website requires a Cisco.com user ID and password. |
Feature Information for IPv6 QoS: MQC Traffic Shaping
The following table provides release information about the feature or features described in this module. This table lists only the software release that introduced support for a given feature in a given software release train. Unless noted otherwise, subsequent releases of that software release train also support that feature.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to . An account on Cisco.com is not required.Feature Name |
Releases |
Feature Information |
|---|---|---|
|
IPv6 QoS: MQC Traffic Shaping |
12.2(13)T 12.3 12.2(50)SG 3.2.0SG 15.0(2)SG 12.2(33)SRA 12.2(18)SXE |
Traffic shaping allows you to limit the packet dequeue rate by holding additional packets in the queues and forwarding them as specified by parameters configured for traffic shaping features. |