SNMP Diagnostics

The Simple Network Management Protocol (SNMP) diagnostics feature allows you to diagnose configuration problems. The feature can be used to troubleshoot, debug connectivity issues, packet loss, and latency in a LAN environment with the help of Cisco command line interface commands.

Finding Feature Information

Your software release may not support all the features documented in this module. For the latest caveats and feature information, see Bug Search Tool and the release notes for your platform and software release. To find information about the features documented in this module, and to see a list of the releases in which each feature is supported, see the feature information table.

Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to www.cisco.com/​go/​cfn. An account on Cisco.com is not required.

Information about SNMP Diagnostics

SNMP Diagnostics

The SNMP Diagnostics feature adds Cisco command line interface commands to display the object identifiers that are recently requested by the network management system, and to display the SNMP debug messages.

Additional References

Related Documents

Related Topic

Document Title

Cisco IOS commands

Cisco IOS Master Command List, All Releases

SNMP commands: complete command syntax, command mode, command history, defaults, usage guidelines, and examples

Cisco IOS SNMP Command Reference

Cisco implementation of RFC 1724, RIP Version 2 MIB Extensions

RIPv2 Monitoring with SNMP Using the RFC 1724 MIB Extensions feature module

DSP Operational State Notifications for notifications to be generated when a digital signaling processor (DSP) is used

DSP Operational State Notifications feature module

Standards and RFCs

Standard/RFC

Title

CBC-DES (DES-56) standard

Symmetric Encryption Protocol

STD: 58

Structure of Management Information Version 2 (SMIv2)

RFC 1067

A Simple Network Management Protocol

RFC 1091

Telnet terminal-type option

RFC 1098

Simple Network Management Protocol (SNMP)

RFC 1157

Simple Network Management Protocol (SNMP)

RFC 1213

Management Information Base for Network Management of TCP/IP-based internets:MIB-II

RFC 1215

Convention for defining traps for use with the SNMP

RFC 1901

Introduction to Community-based SNMPv2

RFC 1905

Common Management Information Services and Protocol over TCP/IP (CMOT)

RFC 1906

Telnet X Display Location Option

RFC 1908

Simple Network Management Protocol (SNMP)

RFC 2104

HMAC: Keyed-Hashing for Message Authentication

RFC 2206

RSVP Management Information Base using SMIv2

RFC 2213

Integrated Services Management Information Base using SMIv2

RFC 2214

Integrated Services Management Information Base Guaranteed Service Extensions using SMIv2

RFC 2271

An Architecture for Describing SNMP Management Frameworks

RFC 2570

Introduction to Version 3 of the Internet-standard Network Management Framework

RFC 2578

Structure of Management Information Version 2 (SMIv2)

RFC 2579

Textual Conventions for SMIv2

RFC 2580

Conformance Statements for SMIv2

RFC 2981

Event MIB

RFC 2982

Distributed Management Expression MIB

RFC 3413

SNMPv3 Applications

RFC 3415

View-based Access Control Model (VACM) for the Simple Network Management Protocol (SNMP)

RFC 3418

Management Information Base (MIB) for the Simple Network Management Protocol (SNMP)

MIBs

MIB

MIBs Link

  • Circuit Interface Identification MIB

  • Cisco SNMPv2

  • Ethernet-like Interfaces MIB

  • Event MIB

  • Expression MIB Support for Delta, Wildcarding, and Aggregation

  • Interfaces Group MIB (IF-MIB)

  • Interfaces Group MIB Enhancements

  • MIB Enhancements for Universal Gateways and Access Servers

  • MSDP MIB

  • NTP MIB

  • Response Time Monitor MIB

  • Virtual Switch MIB

To locate and download MIBs for selected platforms, releases, and feature sets, use Cisco MIB Locator found at the following URL:

http:/​/​www.cisco.com/​go/​mibs

Technical Assistance

Description

Link

The Cisco Support and Documentation website provides online resources to download documentation, software, and tools. Use these resources to install and configure the software and to troubleshoot and resolve technical issues with Cisco products and technologies. Access to most tools on the Cisco Support and Documentation website requires a Cisco.com user ID and password.

http:/​/​www.cisco.com/​cisco/​web/​support/​index.html

Feature Information for SNMP Diagnostics

The following table provides release information about the feature or features described in this module. This table lists only the software release that introduced support for a given feature in a given software release train. Unless noted otherwise, subsequent releases of that software release train also support that feature.

Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to . An account on Cisco.com is not required.
Table 1 Feature Information for SNMP Diagnostics

Feature Name

Releases

Feature Information

SNMP Diagnostics

12.2(33)SRE

12.2(50)SY

12.4(20)T

15.0(1)S

The SNMP Diagnostics feature adds Cisco command line interface commands to display object identifiers recently requested by the network management system, and to display the SNMP debug messages.

The following commands were introduced or modified: debug, snmp detail, show snmp stats oid.