- Simple Network Management Protocol
- SNMP Manager
- SNMP Diagnostics
- SNMP Trap Simulations
- SNMP Notification Logging
- Memory Pool—SNMP Notification Support
- SNMP Inform Request
- SNMP Support for VPNs
- SNMP Support over VPNs—Context-Based Access Control
- Interfaces MIB—SNMP context–based access
- SNMP Support for VLAN Subinterfaces
- Entity MIB—Phase 1
- Event MIB and Expression MIB Enhancements
- Expression MIB Support of Delta, Wildcarding, and Aggregation
- MIB Persistence
- Circuit Interface Identification Persistence for SNMP
- Interface Index Display for SNMP
- Interface Index Persistence
- SNMP Version 3
- AES and 3-DES Encryption Support for SNMP Version 3
Interface Index Display for SNMP
The Interface Index Display for SNMP feature introduces new commands and command modifications that allow advanced users of Simple Network Management Protocol (SNMP) to view information about the interface registrations directly on the managed agent. (For the purposes of this document, the agent is the routing device running Cisco software.) In other words, the commands in this feature allow the user to display MIB information from the agent without using an external NMS.
- Finding Feature Information
- Information about Interface Index Display for SNMP
- Additional References
- Feature Information for Interface Index Display for SNMP
Finding Feature Information
Your software release may not support all the features documented in this module. For the latest caveats and feature information, see Bug Search Tool and the release notes for your platform and software release. To find information about the features documented in this module, and to see a list of the releases in which each feature is supported, see the feature information table.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to www.cisco.com/go/cfn. An account on Cisco.com is not required.
Information about Interface Index Display for SNMP
Interface Index Display for SNMP
The Interface Index Display for SNMP feature introduces new commands and command modifications that allow advanced users of SNMP to view information about interface registrations directly on the managed agent. You can display MIB information from the agent without using an external NMS.
This feature addresses three objects in the Interfaces MIB: ifIndex, ifAlias, and ifName. For complete definitions of these objects, see the IF-MIB.my file available at the Cisco SNMPv2 MIB website.
Additional References
Related Documents
Related Topic |
Document Title |
---|---|
Cisco IOS commands |
|
SNMP commands: complete command syntax, command mode, command history, defaults, usage guidelines, and examples |
|
Cisco implementation of RFC 1724, RIP Version 2 MIB Extensions |
RIPv2 Monitoring with SNMP Using the RFC 1724 MIB Extensions feature module |
DSP Operational State Notifications for notifications to be generated when a digital signaling processor (DSP) is used |
DSP Operational State Notifications feature module |
Standards and RFCs
Standard/RFC |
Title |
---|---|
CBC-DES (DES-56) standard |
Symmetric Encryption Protocol |
STD: 58 |
Structure of Management Information Version 2 (SMIv2) |
RFC 1067 |
A Simple Network Management Protocol |
RFC 1091 |
Telnet terminal-type option |
RFC 1098 |
Simple Network Management Protocol (SNMP) |
RFC 1157 |
Simple Network Management Protocol (SNMP) |
RFC 1213 |
Management Information Base for Network Management of TCP/IP-based internets:MIB-II |
RFC 1215 |
Convention for defining traps for use with the SNMP |
RFC 1901 |
Introduction to Community-based SNMPv2 |
RFC 1905 |
Common Management Information Services and Protocol over TCP/IP (CMOT) |
RFC 1906 |
Telnet X Display Location Option |
RFC 1908 |
Simple Network Management Protocol (SNMP) |
RFC 2104 |
HMAC: Keyed-Hashing for Message Authentication |
RFC 2206 |
RSVP Management Information Base using SMIv2 |
RFC 2213 |
Integrated Services Management Information Base using SMIv2 |
RFC 2214 |
Integrated Services Management Information Base Guaranteed Service Extensions using SMIv2 |
RFC 2271 |
An Architecture for Describing SNMP Management Frameworks |
RFC 2570 |
Introduction to Version 3 of the Internet-standard Network Management Framework |
RFC 2578 |
Structure of Management Information Version 2 (SMIv2) |
RFC 2579 |
Textual Conventions for SMIv2 |
RFC 2580 |
Conformance Statements for SMIv2 |
RFC 2981 |
Event MIB |
RFC 2982 |
Distributed Management Expression MIB |
RFC 3413 |
SNMPv3 Applications |
RFC 3415 |
View-based Access Control Model (VACM) for the Simple Network Management Protocol (SNMP) |
RFC 3418 |
Management Information Base (MIB) for the Simple Network Management Protocol (SNMP) |
MIBs
Technical Assistance
Description |
Link |
---|---|
The Cisco Support and Documentation website provides online resources to download documentation, software, and tools. Use these resources to install and configure the software and to troubleshoot and resolve technical issues with Cisco products and technologies. Access to most tools on the Cisco Support and Documentation website requires a Cisco.com user ID and password. |
Feature Information for Interface Index Display for SNMP
The following table provides release information about the feature or features described in this module. This table lists only the software release that introduced support for a given feature in a given software release train. Unless noted otherwise, subsequent releases of that software release train also support that feature.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to . An account on Cisco.com is not required.Feature Name |
Releases |
Feature Information |
---|---|---|
Interface Index Display for SNMP |
12.2(2)T |
The Interface Index Display for SNMP feature introduces new commands and command modifications that allow advanced users of SNMP to view information about interface registrations directly on the managed agent. You can display MIB information from the agent without using an external NMS. This feature addresses three objects in the Interfaces MIB: ifIndex, ifAlias, and ifName. For complete definitions of these objects, see the IF-MIB.my file available at the Cisco SNMPv2 MIB website. |