Contents

Frame Relay MIB Enhancements

The Cisco Frame Relay MIB describes managed objects that enable users to remotely monitor Frame Relay operations using Simple Network Management Protocol (SNMP). Frame Relay fragmentation is supported in the MIB.

Finding Feature Information

Your software release may not support all the features documented in this module. For the latest caveats and feature information, see Bug Search Tool and the release notes for your platform and software release. To find information about the features documented in this module, and to see a list of the releases in which each feature is supported, see the feature information table at the end of this module.

Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to www.cisco.com/​go/​cfn. An account on Cisco.com is not required.

Prerequisites for Frame Relay MIB Enhancements

The tasks in this document assume that you have configured Frame Relay and SNMP on your devices.

To access the information introduced by the Frame Relay MIB enhancements, you must have the Cisco Frame Relay MIB in the MIB file called CISCO-FRAME-RELAY-MIB.my compiled in your network management system (NMS) application. You can find this MIB on the Web at Cisco's MIB website at

http:/​/​www.cisco.com/​public/​sw-center/​netmgmt/​cmtk/​mibs.shtml

Information About Frame Relay MIB Enhancements

Feature Overview

The Cisco Frame Relay MIB describes managed objects that enable users to remotely monitor Frame Relay operations using Simple Network Management Protocol (SNMP). The Frame Relay MIB Enhancements feature extends the Cisco Frame Relay MIB by adding MIB objects to monitor the following Frame Relay functionality:

  • Frame Relay fragmentation

  • Frame Relay-ATM Network Interworking (FRF.5)

  • Frame Relay-ATM Service Interworking (FRF.8)

  • Frame Relay switching

  • Input and output rates of individual virtual circuits (VCs)

The table below describes the MIB tables and objects that are introduced by the Frame Relay MIB enhancements. For a complete description of the MIB, see the Cisco Frame Relay MIB file CISCO-FRAME-RELAY-MIB.my, available through Cisco.com at the following URL:

http://www.cisco.com/public/sw-center/netmgmt/cmtk/mibs.shtml

Table 1 MIB Tables and Objects Introduced by the Frame Relay MIB Enhancements

Table or Object

Description

cfrFragTable

Table of Frame Relay fragmentation information.

cfrFRF5ConnectionTable

Table of Frame Relay-ATM Network Interworking connection information.

cfrFRF8ConnectionTable

Table of Frame Relay-ATM Service Interworking connection information.

cfrSwitchingTable

Table of Frame Relay switching entries.

cfrExtCircuitTxDataRate

Average rate, in bytes per second, at which data is transmitted on a circuit.

cfrExtCircuitTxPktRate

Average number of packets sent per second on a circuit.

cfrExtCircuitRcvDataRate

Average rate, in bytes per second, at which data is received on a circuit.

cfrExtCircuitRcvPktRate

Average number of packets received per second on a circuit.

The Frame Relay MIB Enhancements feature also modifies the load-interval command to enable you to configure the load interval per permanent virtual circuit (PVC). The load interval is the length of time for which data is used to compute load statistics, including input rate in bits and packets per second, output rate in bits and packets per second, load, and reliability. Before the introduction of this feature, the load interval could be configured only for the interface.

Benefits

The Frame Relay MIB Enhancements enable you to use SNMP to monitor the following:

  • Frame Relay fragmentation

  • Frame Relay-ATM Network Interworking (FRF.5)

  • Frame Relay-ATM Service Interworking (FRF.8)

  • Frame Relay switching

  • Input and output rates of individual virtual circuits (VCs)

Related Documents

For information on configuring Frame Relay using Cisco IOS software, refer to the following documents:

  • The chapter " Configuring Frame Relay " in the Cisco IOS Wide-Area Networking Configuration Guide , Release 12.2

  • The chapter " Frame Relay Commands " in the Cisco IOS Wide-Area Networking Command Reference , Release 12.2

For information on configuring SNMP using Cisco IOS software, refer to the following documents:

  • The chapter " Configuring Simple Network Management Protocol " in the Cisco IOS Configuration Fundamentals Configuration Guide , Release 12.2

  • The chapter " SNMP Commands " in the Cisco IOS Configuration Fundamentals Command Reference , Release 12.2

Supported Platforms

  • This MIB feature is platform independent, and is supported on all images that support Frame Relay and SNMP.

Determining Platform Support Through Feature Navigator

MIB introductions and updates are not tracked through Feature Navigator. Instead, use the MIB Locator tool at http://www.cisco.com/go/mibs .

Supported Standards and MIBs and RFCs

Standards

No new or modified standards are supported by this feature.

MIBs

This feature provides enhancements to the Cisco Frame Relay MIB. The MIB file CISCO-FRAME-RELAY-MIB.my can be downloaded from the Cisco MIB website on Cisco.com at the following URL:

http://www.cisco.com/public/sw-center/netmgmt/cmtk/mibs.shtml

To obtain lists of supported MIBs by platform and Cisco IOS release, and to download MIB modules, go to the Cisco MIB website on Cisco.com at the following URL:

http://www.cisco.com/public/sw-center/netmgmt/cmtk/mibs.shtml

RFCs

No new or modified RFCs are supported by this feature.

How to Configure Frame Relay MIB Enhancements

Setting the Load Interval for a PVC

You can change the period of time over which a set of data is used for computing load statistics. Decisions, such as for dial backup, depend on these statistics. If you decrease the load interval, the average statistics are computed over a shorter period of time and are more responsive to bursts of traffic.

To change the length of time for which a set of data is used to compute load statistics for a PVC, use the following commands beginning in interface configuration mode:

SUMMARY STEPS

    1.    Router(config-if)# frame-relay interface-dlci dlci

    2.    router(config-fr-dlci)# load-interval seconds


DETAILED STEPS
     Command or ActionPurpose
    Step 1 Router(config-if)# frame-relay interface-dlci dlci 

    Assigns a specific PVC to a DLCI1, and enters Frame Relay DLCI configuration mode.

     
    Step 2 router(config-fr-dlci)# load-interval seconds 

    Changes the length of time for which data is used to compute load statistics.

    The seconds argument must be a multiple of 30. The range is from 30 to 300 seconds. The default is 300 seconds.

     
    1 DLCI = data-link connection identifier

    Verifying the Load Interval

    Use the show running-config command to verify that you have configured the load interval correctly.

    Configuration Examples for Frame Relay MIB Enhancements

    Example Setting the Load Interval for a PVC

    In the following example, the load interval is set to 60 seconds for a Frame Relay PVC with the DLCI 100: 

    interface serial 1/1
 frame-relay interface-dlci 100
  load-interval 60

    Feature Information for Frame Relay MIB Enhancements

    The following table provides release information about the feature or features described in this module. This table lists only the software release that introduced support for a given feature in a given software release train. Unless noted otherwise, subsequent releases of that software release train also support that feature.

    Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to www.cisco.com/​go/​cfn. An account on Cisco.com is not required.

    Table 2 Feature Information for Frame Relay MIB Enhancements

    Feature Name

    Releases

    Feature Information

    Frame Relay MIB Enhancements

    12.2(2)T

    The Cisco Frame Relay MIB describes managed objects that enable users to remotely monitor Frame Relay operations using SNMP.

    Frame Relay MIB Enhancements

    Frame Relay MIB Enhancements

    The Cisco Frame Relay MIB describes managed objects that enable users to remotely monitor Frame Relay operations using Simple Network Management Protocol (SNMP). Frame Relay fragmentation is supported in the MIB.

    Finding Feature Information

    Your software release may not support all the features documented in this module. For the latest caveats and feature information, see Bug Search Tool and the release notes for your platform and software release. To find information about the features documented in this module, and to see a list of the releases in which each feature is supported, see the feature information table at the end of this module.

    Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to www.cisco.com/​go/​cfn. An account on Cisco.com is not required.

    Prerequisites for Frame Relay MIB Enhancements

    The tasks in this document assume that you have configured Frame Relay and SNMP on your devices.

    To access the information introduced by the Frame Relay MIB enhancements, you must have the Cisco Frame Relay MIB in the MIB file called CISCO-FRAME-RELAY-MIB.my compiled in your network management system (NMS) application. You can find this MIB on the Web at Cisco's MIB website at

    http:/​/​www.cisco.com/​public/​sw-center/​netmgmt/​cmtk/​mibs.shtml

    Information About Frame Relay MIB Enhancements

    Feature Overview

    The Cisco Frame Relay MIB describes managed objects that enable users to remotely monitor Frame Relay operations using Simple Network Management Protocol (SNMP). The Frame Relay MIB Enhancements feature extends the Cisco Frame Relay MIB by adding MIB objects to monitor the following Frame Relay functionality:

    • Frame Relay fragmentation

    • Frame Relay-ATM Network Interworking (FRF.5)

    • Frame Relay-ATM Service Interworking (FRF.8)

    • Frame Relay switching

    • Input and output rates of individual virtual circuits (VCs)

    The table below describes the MIB tables and objects that are introduced by the Frame Relay MIB enhancements. For a complete description of the MIB, see the Cisco Frame Relay MIB file CISCO-FRAME-RELAY-MIB.my, available through Cisco.com at the following URL:

    http://www.cisco.com/public/sw-center/netmgmt/cmtk/mibs.shtml

    Table 1 MIB Tables and Objects Introduced by the Frame Relay MIB Enhancements

    Table or Object

    Description

    cfrFragTable

    Table of Frame Relay fragmentation information.

    cfrFRF5ConnectionTable

    Table of Frame Relay-ATM Network Interworking connection information.

    cfrFRF8ConnectionTable

    Table of Frame Relay-ATM Service Interworking connection information.

    cfrSwitchingTable

    Table of Frame Relay switching entries.

    cfrExtCircuitTxDataRate

    Average rate, in bytes per second, at which data is transmitted on a circuit.

    cfrExtCircuitTxPktRate

    Average number of packets sent per second on a circuit.

    cfrExtCircuitRcvDataRate

    Average rate, in bytes per second, at which data is received on a circuit.

    cfrExtCircuitRcvPktRate

    Average number of packets received per second on a circuit.

    The Frame Relay MIB Enhancements feature also modifies the load-interval command to enable you to configure the load interval per permanent virtual circuit (PVC). The load interval is the length of time for which data is used to compute load statistics, including input rate in bits and packets per second, output rate in bits and packets per second, load, and reliability. Before the introduction of this feature, the load interval could be configured only for the interface.

    Benefits

    The Frame Relay MIB Enhancements enable you to use SNMP to monitor the following:

    • Frame Relay fragmentation

    • Frame Relay-ATM Network Interworking (FRF.5)

    • Frame Relay-ATM Service Interworking (FRF.8)

    • Frame Relay switching

    • Input and output rates of individual virtual circuits (VCs)

    Related Documents

    For information on configuring Frame Relay using Cisco IOS software, refer to the following documents:

    • The chapter " Configuring Frame Relay " in the Cisco IOS Wide-Area Networking Configuration Guide , Release 12.2

    • The chapter " Frame Relay Commands " in the Cisco IOS Wide-Area Networking Command Reference , Release 12.2

    For information on configuring SNMP using Cisco IOS software, refer to the following documents:

    • The chapter " Configuring Simple Network Management Protocol " in the Cisco IOS Configuration Fundamentals Configuration Guide , Release 12.2

    • The chapter " SNMP Commands " in the Cisco IOS Configuration Fundamentals Command Reference , Release 12.2

    Supported Platforms

    • This MIB feature is platform independent, and is supported on all images that support Frame Relay and SNMP.

    Determining Platform Support Through Feature Navigator

    MIB introductions and updates are not tracked through Feature Navigator. Instead, use the MIB Locator tool at http://www.cisco.com/go/mibs .

    Supported Standards and MIBs and RFCs

    Standards

    No new or modified standards are supported by this feature.

    MIBs

    This feature provides enhancements to the Cisco Frame Relay MIB. The MIB file CISCO-FRAME-RELAY-MIB.my can be downloaded from the Cisco MIB website on Cisco.com at the following URL:

    http://www.cisco.com/public/sw-center/netmgmt/cmtk/mibs.shtml

    To obtain lists of supported MIBs by platform and Cisco IOS release, and to download MIB modules, go to the Cisco MIB website on Cisco.com at the following URL:

    http://www.cisco.com/public/sw-center/netmgmt/cmtk/mibs.shtml

    RFCs

    No new or modified RFCs are supported by this feature.

    How to Configure Frame Relay MIB Enhancements

    Setting the Load Interval for a PVC

    You can change the period of time over which a set of data is used for computing load statistics. Decisions, such as for dial backup, depend on these statistics. If you decrease the load interval, the average statistics are computed over a shorter period of time and are more responsive to bursts of traffic.

    To change the length of time for which a set of data is used to compute load statistics for a PVC, use the following commands beginning in interface configuration mode:

    SUMMARY STEPS

      1.    Router(config-if)# frame-relay interface-dlci dlci

      2.    router(config-fr-dlci)# load-interval seconds


    DETAILED STEPS
       Command or ActionPurpose
      Step 1 Router(config-if)# frame-relay interface-dlci dlci 

      Assigns a specific PVC to a DLCI1, and enters Frame Relay DLCI configuration mode.

       
      Step 2 router(config-fr-dlci)# load-interval seconds 

      Changes the length of time for which data is used to compute load statistics.

      The seconds argument must be a multiple of 30. The range is from 30 to 300 seconds. The default is 300 seconds.

       
      1 DLCI = data-link connection identifier

      Verifying the Load Interval

      Use the show running-config command to verify that you have configured the load interval correctly.

      Configuration Examples for Frame Relay MIB Enhancements

      Example Setting the Load Interval for a PVC

      In the following example, the load interval is set to 60 seconds for a Frame Relay PVC with the DLCI 100: 

      interface serial 1/1
 frame-relay interface-dlci 100
  load-interval 60

      Feature Information for Frame Relay MIB Enhancements

      The following table provides release information about the feature or features described in this module. This table lists only the software release that introduced support for a given feature in a given software release train. Unless noted otherwise, subsequent releases of that software release train also support that feature.

      Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to www.cisco.com/​go/​cfn. An account on Cisco.com is not required.

      Table 2 Feature Information for Frame Relay MIB Enhancements

      Feature Name

      Releases

      Feature Information

      Frame Relay MIB Enhancements

      12.2(2)T

      The Cisco Frame Relay MIB describes managed objects that enable users to remotely monitor Frame Relay operations using SNMP.