IP Addresses and Services Configuration Guide for Cisco 8000 Series Routers, IOS XR Release 7.8.x

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: November 30, 2022

Chapter: New and Changed IP Addresses and Services Features

New and Changed IP Addresses and Services Features
IP Addresses and Services Features Added or Modified in IOS XR Release 7.8.x

New and Changed IP Addresses and Services Features

This table summarizes the new and changed feature information for the IP Addresses and Services Configuration Guide for Cisco 8000 Series Routers, and tells you where they are documented.

IP Addresses and Services Features Added or Modified in IOS XR Release 7.8.x

IP Addresses Features Added or Modified in IOS XR Release 7.8.x

Table 1. New and Changed Features
Feature	Description	Changed in Release	Where Documented
Filter Ingress IPv6 ACL Traffic based on Hop Limit	This feature was introduced.	Release 7.8.1	Configuring IPv6 ACLs
Enable Ingress Interface Logging on IPv4 and IPv6 ACLs	This feature was introduced.	Release 7.8.1	Enable Ingress Interface Logging on ACLs

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)