Chassis and Module LEDs for the Cisco NCS 5000 Series Routers
This section includes the following topics:
Chassis and Module LED Descriptions
This table describes the chassis LEDs for the Cisco NCS 5000 Series routers.
|
Indicator |
Location |
Function |
Color |
Status |
State |
|---|---|---|---|---|---|
|
Power LED |
Front of Chassis |
Chassis Power/Health |
Green |
Solid On |
System is On and operating normally. |
|
Off |
Router is powered off. |
||||
|
Amber |
On |
Fault Condition. |
|||
|
PSU Status Indicators |
Power Supply(front) |
PSU Health(Multi-Color) |
Green |
Off |
No AC power to power supply. |
|
Solid On |
power supply on and OK. |
||||
|
Amber |
Solid On |
Power supply failures, over voltage, over current, over temperature |
|||
|
1 Hz blinking |
AC present, 3.3VSB on, PSU is off |
||||
|
Off |
Operating normally . |
Conditions Indicated by the Power Supply LEDs
You can determine the power supply conditions by combining the LED states of the OK and FAIL LEDs .
|
AC Power Supply Condition |
OK LED(Green) |
FAILED LED(Amber) |
|---|---|---|
|
No AC or DC power to all power supplies. |
Off |
Off |
|
Power supply failure, including over voltage, over current, over temperature, and fan failure. |
off |
On |
|
Power supply warning events where the power supply continues to operate. These events include high temperature, high power, and slow fan. |
Off |
Blinking |
|
AC present, 3.3 voltage standby (VSB) on, and the power supply unit is off. For a DC power supply, it indicates that DC power is present. |
Blinking |
Off |
|
Power supply on and OK. |
On |
Off |
Feedback