Cisco Prime Infrastructure 3.6 Reference Guide

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: May 6, 2019

Field Reference for Maps Pages

This chapter provides field descriptions for pages found under the Maps in Cisco Prime Infrastructure.

Wireless Maps > Site Maps > AP Mesh Info

The following table describes the fields on the Maps > Wireless Maps > Site Maps AP Mesh Info page.

Table 1. Maps > Wireless Maps > Site Maps > AP Mesh Bridging Link Information
Field	Description
Information fetched on	Date and time that information was compiled.
Link SNR	Link signal-to-noise ratio (SNR).
Link Type	Hierarchical link relationship.
SNR Up	Signal-to-noise radio for the uplink (dB).
SNR Down	Signal-to-noise radio for the downlink (dB).
PER	The packet error rate for the link.
Tx Parent Packets	The TX packets to a node while acting as a parent.
Rx Parent Packets	The RX packets to a node while acting as a parent.
Time of Last Hello	Date and time of last hello.

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)